Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

High-Power Amplifier (HPA) Design and Manufacturing

Active

Federal

Response Deadline08/03/2026, 03:59:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the full lifecycle design, fabrication, testing, and delivery of a high-power amplifier specifically engineered for integration into an Electronic Warfare system, with strict adherence to military performance and environmental standards. All work must be completed and the unit delivered within a stringent 60-day timeline, emphasizing rapid development and validated readiness for operational deployment. The amplifier must meet defined technical specifications for power output, frequency range, efficiency, and ruggedness to withstand extreme battlefield conditions. This is a subcontract under the Department of Defense, procured by the W6QK Acc-Apg Adelphi office, with performance exclusively tied to White Sands Missile Range, New Mexico, at ZIP code 88002. The North American Industry Classification System code 334516 identifies the scope within electronic component manufacturing. The solicitation was posted on July 27, 2026, with responses due by August 3, 2026, indicating a narrow window for qualified vendors to submit proposals. No set-aside provisions apply, making the opportunity open to all eligible subcontractors capable of fulfilling the demanding technical and scheduling requirements.

General Info

Design, fabricate, test, and deliver a high-power military amplifier to White Sands in 60 days per DoD specs.

Agency

Department Of Defense → W6QK Acc-Apg AdelphiView Agency

NAICS

334516 - Analytical Laboratory Instrument ManufacturingView NAICS

Place of Performance

White Sands Missile Range, NM, 88002, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 03:59:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QK Acc-Apg Adelphi

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → W6QK Acc-Apg Adelphi

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Full lifecycle design, fabrication, testing, and delivery of a high-power amplifier for integration into an Electronic Warfare (EW) system, compliant with military standards and delivered within 60 days.

Similar Contracts

Same NAICS industry code

MEASURING TUBE, GASThe measuring tube is designed for use with gas analyzers to detect carbon dioxide concentrations in compressed gases, with a measurable range of 100 to 3000 parts per million per liter of air. It is constructed as a glass tube with melted tips for safety and durability, and is packaged in lots of 10 units per package under the unit of issue PG. This item is governed by technical and quality requirements from the DLA Master List, ensuring compliance with federal standards for defense procurement. Packaging must adhere to DLA packaging requirements and the Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and each unit must be sealed in a container that prevents damage and breakage during transit. Shipping containers must ensure safe delivery at the lowest carrier rate to the specified delivery point, with all markings strictly following medical labeling protocols. The item has a non-extendable shelf life of 24 months, with no more than three months allowed to have elapsed between the date of manufacture and the date of delivery to the government. All packaging must clearly display the date of manufacture, expiration or retest date, contract number, and lot number in accordance with the latest revision of MMS1C. The NSN is 6630-12-189-3126, and the solicitation number is SPE2DH-26-T-5587, with a delivery requirement of 20 days ADO. The procurement is managed by the Department of Defense’s Medical Supply Chain FSH, with Kyle Fuller as the primary point of contact, and is subject to defense information handling protocols under RD003. The NAICS code 334516 indicates classification under medical and surgical instrument manufacturing.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 15 hours ago

DEADLINE

DETECTOR, GASThe contract is for a single unit of a gas detector, part number C03-0907-001 and NSN 6665016083038, supplied by HONEYWELL ANALYTICS INC., under solicitation SPE7M0-26-T-021M. The item is classified as a Type I shelf-life item with a non-extendable six-month shelf life, requiring strict compliance with packaging, marking, and shipping standards per MIL-STD-2073-1E and MIL-STD-129, including the special marking code 32 for Type I shelf-life identification. Packaging and palletization must adhere to DLA’s RP001 requirements, and hazardous materials shipping protocols under IP025 apply. Delivery is FOB origin with zero quantity variance, inspection and acceptance occurring at the destination within five days of shipment. The item must be shipped via the fastest traceable method, explicitly prohibiting parcel post, with two separate delivery points identified under different project codes: one to Fort Eustis, Virginia and another to Coraopolis, Pennsylvania. The required delivery dates are July 23, 2026, and July 27, 2026, respectively, and the contract is governed by the DLA Master List of Technical and Quality Requirements incorporated by reference. The unit of issue is each, and pricing is set at one dollar per unit. Government use identifiers and tracking codes are provided for logistics control and accountability.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 15 hours ago

DEADLINE

ADJUSTING DEVICE, BEThe contract pertains to the procurement of one adjusting device, belt tension gauge, with NSN 2990011415776, under solicitation SPE7L1-26-T-886A. Delivery is required within 20 days from the order date, with FOB origin terms, and the item must be shipped by the fastest traceable means—parcel post is prohibited. The delivery destination is the Blount Island Property Account in Jacksonville, Florida, with an alternate shipment address to The Basic School in Quantico, Virginia. Packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129K, with the waiver of MIL-L-61002 requirements substituted per DGSC directive. Marking and palletization follow DLA’s packaging protocols, and the use of plastics for wrapping, cushioning, or dunnage is to be avoided where feasible. The contract incorporates technical and quality standards from the DLA Master List, including a specific prohibition against intentional introduction of mercury or mercury-containing compounds into the supplied hardware, with limited exceptions for functional uses such as batteries, fluorescent lamps, sensors, and weapon systems, all of which must include secondary containment as per NAVSEA 5100-003D. The quantity is strictly fixed at one unit with zero variance allowance, and inspection and acceptance occur at the destination. The original required delivery date is July 28, 2026, and the item is subject to defense information handling protocols under RD003.

LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

UIFB Brand Name or Equal HunterLab MINISCAN EZ AND COLORFLEX L2The Virginia Department of Transportation is soliciting bids for the procurement of new HunterLab MiniScan EZ 4500L and ColorFlex Spectrophotometer/Colorimeter systems, with brand name or equal alternatives permitted. The equipment is intended for precise color measurement and analysis and must include all necessary accessories to ensure full operational capability upon delivery. This solicitation, identified as QQ-125108, was posted on July 28, 2026, and responses are due by August 3, 2026, at 4:00 PM. The place of performance is specified as Sandston, Virginia, with delivery and installation required at that location. The solicitation is categorized under state and local government procurement, with no specific set-aside designation. All inquiries and communications regarding this contract must be directed to Christine Berry at the Virginia Department of Transportation, using the provided phone number and email address. The full details and submission portal can be accessed through the provided UI link.

Virginia Department of Transportation

POSTED

about 20 hours ago

DEADLINE

A4 Power Supply Repair Service

Navsup Weapon Systems Support

POSTED

about 20 hours ago

DEADLINE

High-Precision Optical Component Supply

Department Of Commerce Nist

POSTED

about 20 hours ago

DEADLINE

Optical Frequency Comb System Design & Integration

Department Of Commerce Nist

POSTED

about 20 hours ago

DEADLINE

Amendment 00001 Request for Quote (RFQ) 2031ZA26Q00102 for Fourier Transform Infrared (FTIR) Microscope

Office Of The Chief Procurement Officer

POSTED

about 20 hours ago

DEADLINE

**AMENDED 002** -6640 - WSNC IDIQ Respiratory Fit Testing Equipment, Supplies, and Annual Calibrations

260-NETWORK Contract Office 20 (36C260)

POSTED

about 20 hours ago

DEADLINE

Astromaterials Glovebox Systems - Design & Fabrication (A-BOX)This notice, issued by NASA’s Johnson Space Center under solicitation number 80JSC026A-BOX, is a Request for Information (RFI) for the design, fabrication, testing, delivery, and installation of controlled-atmosphere glovebox systems to support the Astromaterials Research and Exploration Science Curation Facility. The systems are intended for handling lunar and planetary samples, including those from Artemis missions, and must operate in ambient, cold (−85 to −20 °C), and ultra-cold/cryogenic (< −85 °C) environments while maintaining inert atmosphere conditions. Technical requirements are aligned with the American Glovebox Society Guidelines AGS-G001-2007 (3rd Edition), and compliance with quality standards such as ISO9001, AS9100, and NQA-1 is mandatory. The RFI seeks industry input on feasibility, capabilities, and cost estimates, with no formal proposals required. Access to the technical library containing detailed requirements is granted through SAM.gov after completing a two-step verification process and submitting a formal request form to NASA, with all requestors responsible for U.S. export control compliance. The response deadline has been extended to August 5, 2026, at 4:00 PM Central Time. The RFI emphasizes small business participation and solicit feedback on realistic subcontracting goals, barriers to entry for small businesses, and strategies to enhance involvement such as modularizing scope or encouraging teaming arrangements. NASA is considering potential set-asides for Small Business, Small Disadvantaged Business, HUBZone, Veteran-Owned, Service-Disabled Veteran-Owned, and Women-Owned Small Businesses. Organizational conflicts of interest (OCI) are a significant concern due to the nature of prior involvement in astromaterials handling and related design work; respondents must disclose any potential OCI and propose mitigation strategies, though NASA’s review at this stage does not constitute formal approval or assurance. Responses must be submitted electronically via email to the designated contracting officer and contract specialist, formatted according to Attachment II—Capabilities Questions and Responses—which addresses small business utilization, OCI, technical capability, and business considerations. The place of performance is the ARES Curation Facility in Houston, Texas, and final delivery and installation will occur there. No contract value, pricing, or award criteria are provided, as this is purely an information-gathering phase to inform future procurement strategy. Any information submitted is treated as voluntarily provided under FOIA and will not be publicly

NASA Johnson Space Center

POSTED

about 20 hours ago

DEADLINE

6640--MATEO TL RUO, Integrated Digital MicroscopeThis is a Sources Sought notice issued by the Department of Veterans Affairs, Network Contracting Office 1, to conduct market research for the acquisition of a Leica Mateo TL RUO integrated digital microscope for research use at the White River Junction VAMC. The notice is not a solicitation and no contract will be awarded based on responses; it serves solely to identify qualified vendors, assess market capabilities, and inform future procurement strategy under NAICS code 334516. Respondents must submit a capability statement addressing the technical requirements of the microscope system, including a 6-megapixel color camera, 15.6-inch monitor, four pre-installed objectives, Enersight software with confluency module, and a guide kit, along with a completed Sources Sought Worksheet that includes company details, Unique Entity Identifier, CAGE code, SAM registration status, and socioeconomic certifications such as small business, VOSB, SDVOSB, 8(a), HUBZone, or WOSB status. Responses must be submitted electronically via email to antoinette.sebastian@va.gov and cory.dionne@va.gov by July 7th, 2026, at 3:00 PM EST, with RFQ #36C24126Q0494 in the subject line, and must not exceed eight total pages in Microsoft Word or Adobe PDF format. No reimbursement will be provided for responses, no feedback or evaluation results will be given, and inclusion in any future solicitation is not guaranteed. The Government retains ownership of all submitted data, and future procurement could result in a set-aside for small businesses, VOSBs, or SDVOSBs, or proceed as full and open competition based on the market research findings. The place of performance is designated as White River Junction, Vermont, with no packaging, delivery, invoicing, or payment details specified, as this notice precedes any formal contracting action.

241-NETWORK Contract Office 01 (36C241)

POSTED

about 20 hours ago

DEADLINE

RF Magnetron Sputter power SuppliesThe U.S. Naval Research Laboratory, under the Department of Defense, is seeking two RF magnetron sputter power supplies for combinatorial materials growth, as part of a combined solicitation numbered N00173-26Q-1301392637. The requirement is posted under NAICS code 334516 and targets advanced deposition systems essential for high-throughput materials research, typically used to create and characterize diverse thin-film compositions simultaneously. Offers are due by August 2, 2026, with performance expected to occur at the agency’s facility in Washington, District of Columbia, 20375. The point of contact for inquiries is Danielle Davenport, who can be reached via email at danielle.c.davenport4.civ@us.navy.mil. The solicitation is open to eligible contractors without set-aside restrictions and reflects a direct procurement by a federal research and development entity focused on next-generation material science applications.

Naval Research Laboratory

POSTED

about 20 hours ago

DEADLINE

More opportunities from Department Of Defense → W6QK Acc-Apg Adelphi

Same awarding agency

100% Small Business Set-Aside for Single Girder underhung Bridge CraneThe Department of Defense, through the W6QK Acc-Apg Adelphi office, issued a Sources Sought Notice under solicitation number W911QX26QA123 to identify potential small business vendors capable of providing a single girder underhung bridge crane system for installation at Aberdeen Proving Ground, Maryland. This action is not a request for proposals but a market research effort to gauge industry interest and capability. The required crane system includes a 20-foot span, 50-foot length, and 5-ton capacity with a coped bridge meeting CMAA Class C specifications, powered by a 460-volt three-phase motor and equipped with a chain hoist (updated from an initial wire rope hoist specification), variable frequency drive controls, an electronic overload limiter, and a ten-foot factory lift. The system must include a freestanding runway with eight columns providing nine feet six inches of clearance, radio control with two transmitters and one receiver, and a backup push button pendant. The scope also requires removal and disposal of the existing three-ton bridge crane, full installation, rigging, freight, delivery, and on-site operator training for shop employees. All equipment must be OSHA load tested per 1910.179(K)(2), 1926.251(A)(4), and 1926.251(C)(15)(II), with warranties of one year on equipment, two years on installation labor, and five years on the hoist motor. The solicitation is a total small business set-aside under NAICS code 333923, with a 1,250-employee size standard. Respondents must certify their business size and indicate any applicable small business designations including HUBZone, 8(a), SDVOSB, WOSB, or EDWOSB. Technical responses must detail the extent to which each specification can be met, provide evidence of past performance through completed projects, and include business classification information. The original response deadline was July 13, 2026, but was extended via Amendment 0002 to August 7, 2026, with submissions required via email to Keturah Moore at keturah.l.moore.civ@army.mil. Responses cannot be submitted in .zip or .exe file formats. All other terms and conditions of the original notice remain in effect, and

Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

POSTED

about 20 hours ago

DEADLINE

Sources Sought for Real-Time Micro-Focus X-ray Inspection System

Irradiation Apparatus Manufacturing

POSTED

about 20 hours ago

DEADLINE

NOTICE OF INTENT TO SOLE SOURCE – The Government requires a five (5) year (base year plus four (4) option years) service maintenance contract for maintenance of a Government-owned Location of Miss and Hit (LOMAH) system.The Government is seeking a five-year service maintenance contract for the ongoing upkeep of a Government-owned Location of Miss and Hit (LOMAH) system, consisting of a base year and four optional years, to ensure system reliability and operational readiness. This solicitation is being issued as a sole source action under solicitation number W911QX26QA147, with no set-aside requirements, and is classified under NAICS code 811210 for repair and maintenance services. The contract will be managed by the Office of W6QK Acc-Apg Adelphi within the Department of Defense, with performance required at Aberdeen Proving Ground, Maryland. Responses must be submitted by July 31, 2026, with the opportunity posted on July 28, 2026. Primary point of contact is Douglas Dennard, reachable at 520-672-9560 or douglas.c.dennard.civ@army.mil, with Morgan Evans as secondary contact at 520-672-9578 or morgan.j.evans6.civ@army.mil. All necessary documentation, including the Combination Synopsis-Solicitation, Adelphi Instructions, and Provision and Clauses Final, are referenced and must be reviewed by prospective offerors.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 20 hours ago

DEADLINE

Thermo Scientific BIOS 16 Centrifuge, Components, and Start-Up Service

Analytical Laboratory Instrument Manufacturing

POSTED

about 20 hours ago

DEADLINE

High-Voltage Power Booster Supply and DeliveryThe contract requires the supply and delivery of a Simcenter Micred high-voltage power booster, specifically engineered to meet stringent military standards. Full compliance with MIL-STD-130 for unique item identification marking is mandatory, ensuring each unit is permanently and legibly marked with a Data Matrix symbol that contains the necessary technical and origin information. Each delivered unit must be reported to the Department of Defense's Item Unique Identification Registry, either directly or through the Wide Area Workflow system, to maintain accurate asset tracking across the DoD supply chain. The equipment must be delivered to Aberdeen Proving Ground, Maryland, with the zip code 21005 as the designated place of performance. This subcontract is issued under the NAICS code 334413, which corresponds to the manufacturing of electronic instrumentation and control equipment, indicating the technical nature of the product. The solicitation was posted on July 27, 2026, with a strict response deadline of August 3, 2026, at 3:59 PM Eastern Time. The contracting agency is the Department of Defense, specifically under W6QK Acc-Apg Adelphi, and while no set-aside status is specified, the requirement implies direct support to defense operations. All submissions must meet the technical, marking, and reporting requirements without exception to ensure seamless integration into DoD logistics and inventory systems.

Semiconductor and Related Device Manufacturing

POSTED

DEADLINE

Cybersecurity Compliance and CDI Safeguarding SupportThis contract requires the implementation and documentation of NIST SP 800-171 security controls to safeguard Controlled Unclassified Information in nonfederal systems, as mandated by DFARS 252.204-7012. The work includes conducting system assessments to validate compliance with these controls, ensuring all required safeguards are properly configured, maintained, and documented. Additionally, the contractor must develop and deliver a comprehensive cyber incident response plan that outlines procedures for detecting, reporting, and mitigating security breaches involving protected data. All activities must align with Department of Defense cybersecurity standards and be performed at the specified place of performance in White Sands Missile Range, New Mexico, under a subcontract arrangement. The effort is part of a broader initiative to ensure robust cybersecurity posture for DoD-related systems handling sensitive information, with strict adherence to federal cybersecurity frameworks. Compliance is not optional and requires detailed evidence of control implementation, regular assessments, and readiness to respond to incidents in a timely and effective manner. The solicitation window is limited, with responses due by August 3, 2026, and the work falls under NAICS code 541512, indicating it involves computer systems design and related services. Contractors must possess the technical expertise and operational capability to meet these stringent requirements without reliance on external documentation or references, ensuring full accountability and readiness for DoD oversight.

Computer Systems Design Services

POSTED

DEADLINE

Military Packaging, Preservation, and ShippingThe contract requires strict adherence to MIL-STD-129 standards for packaging, preservation, and labeling of military-grade materials, ensuring all items are protected, clearly identified, and prepared for secure transport under defense logistics protocols. All shipments must be conditioned to meet environmental and handling requirements specified by the standard to prevent damage or degradation during transit, with labeling that includes barcodes, part numbers, and other traceable data compliant with DoD directives. Shipments are to be delivered FOB Destination to White Sands Missile Range, New Mexico, with the vendor responsible for end-to-end transportation logistics, including route planning, secure handling, and timely delivery to the specified ZIP code 88002. The contract is classified as a subcontract under NAICS code 484220, indicating a focus on truck transportation services, and the solicitation window closes on August 3, 2026, with bids due by 3:59 PM ET. The awarding agency is the Department of Defense through W6QK Acc-Apg Adelphi, and performance is exclusively tied to the White Sands Missile Range facility.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

IUID Marking and Compliance ServicesThe contract requires permanent Data Matrix UID tagging of HPA and associated components in strict compliance with MIL-STD-130 and ISO/IEC 16022 standards, ensuring durable, machine-readable identification that meets Department of Defense requirements. This includes the full lifecycle of marking execution, quality verification to confirm readability and structural integrity of each Data Matrix code, and mandatory submission of all tagged item data to the DoD IUID Registry for centralized tracking and inventory management. The work is to be performed at White Sands Missile Range, New Mexico, with an established deadline for response set for August 3, 2026, and is classified as a subcontract under NAICS code 339920 for other finished product manufacturing. All activities must align with federal defense standards for asset identification and traceability without exception.

Sporting and Athletic Goods Manufacturing

POSTED

DEADLINE

High Voltage BoosterThe U.S. Army is soliciting a single source purchase for one Simcenter Micred high-voltage power booster, model MG288359NO, manufactured by Oasis Sales, under a combined synopsis-solicitation issued via the Simplified Acquisition Threshold procedures. The item, classified under NAICS code 334413, is required for delivery FOB Destination to Building 321 at Aberdeen Proving Ground, Maryland, no later than two weeks after contract award. The solicitation is not open for competitive bidding, as the government intends to award the contract exclusively to Oasis Sales, though all offers received prior to the deadline will be considered. Responses must be submitted via email to the primary point of contact listed in SAM.gov within five days of the posting date, and must include the offeror’s business size certification relative to the 1,250-employee small business standard and any applicable socioeconomic designations. The acquisition will be structured as a Firm Fixed Price commercial contract with no financing available, and includes standard FAR and DFARS clauses governing commercial item procurement, payment terms, subcontractor management, compliance with export controls, Buy American requirements, and prohibitions related to foreign entities and labor practices. Specific clauses address System for Award Management compliance, electronic fund transfers, executive compensation reporting, and prohibitions on procurement from entities tied to the Maduro regime or Xinjiang region. Additional local requirements from the Adelphi Contracting Division pertain to government inspection, duty-free entry exceptions, tax exemption, receiving procedures, and payment instructions. All offers must include completed representations per FAR 52.212-3 and comply with provisions outlined in the Adelphi Special Instructions and Information document, with no set aside designated for small or disadvantaged businesses.

Semiconductor and Related Device Manufacturing

POSTED

DEADLINE

Brand Name Sole Source for an Environmental ChamberThis solicitation, numbered W911QX26QA166, is a firm-fixed-price contract under Simplified Acquisition Procedures for the acquisition of a benchtop environmental battery test chamber and associated shipping services, issued by the U.S. Army Research Laboratory under the Department of Defense. The procurement is designated as a brand name sole source with no set-aside, and it uses the NAICS code 334516 for small business size determination, which has a threshold of 1,250 employees. Offerors must be registered in the System for Award Management (SAM) and provide valid Unique Entity IDs and CAGE codes. The response deadline is July 30, 2026, at 11:59 a.m. Eastern Time, with submissions accepted only via email to the designated Contract Specialist. Evaluation is based on price and technical capabilities without assigned weights or adjectival ratings, and award will follow a trade-off process, allowing selection of a higher-priced offeror if technical advantages justify the cost. Delivery must be made within four to five months after receipt of order to the U.S. Army Research Laboratory in Adelphi, Maryland, under F.O.B. Destination terms, with inspection and acceptance occurring at Aberdeen Proving Ground, Maryland. The contract mandates strict compliance with DoD-specific requirements, including Unique Item Identification (UUI) via two-dimensional Data Matrix symbols per MIL-STD-130 and ISO/IEC 16022 standards, with machine-readable verification required. All items must be reported in the IUID Registry and through WAWF for invoicing and payment processing, under clause 252.232-7006. Packaging must conform to MIL-STD-129. The contract incorporates numerous DFARS and FAR clauses covering Buy American requirements, preference for domestic commodities, prohibition on hexavalent chromium, restriction on business with the Maduro regime and Xinjiang Uyghur Autonomous Region, cybersecurity standards including NIST SP 800-171 for CUI protection, and reporting obligations for former DoD officials. Contractors must also affirm compliance with telecommunications restrictions under FAR 52.204-24 and -25, and submit required representations regarding small business status and socioeconomic categorizations. No pricing details are provided in the solicitation, and the total contract value remains unlisted as offerors are expected to propose unit and extended prices. The Contracting Officer, Shanna

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Notice of Intent to Sole Source - One (1) High-Power Amplifier (HPA) to support and sustain an already established Electronic Warfare (EW) system.The U.S. Army is issuing a sole-source solicitation under the simplified acquisition threshold to procure one high-power amplifier (HPA) to support and sustain an existing Electronic Warfare (EW) system. The contract, identified by solicitation number W911QX26QA092, is classified as a combined synopsis-solicitation and does not include any set-aside provisions, meaning it is open to any qualified vendor without preference for small businesses or other categories. The solicitation is being managed by the Office of W6QK Acc-Apg Adelphi under the Department of Defense, with the prime contract location specified at White Sands Missile Range in New Mexico, while the contracting office is located in Adelphi, Maryland. The NAICS code 334516 applies, indicating the procurement falls under electronic component manufacturing. Responses are due by August 3, 2026, at 3:59 PM Eastern Time, and all documentation, including provisions, clauses, and a determination justifying sole-source justification, is provided through the attached solicitation materials. The primary point of contact for inquiries is Myoung J. Kang-Jones, reachable via email or phone provided in the solicitation.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Specialized Shipping and FOB Destination LogisticsThe contract requires the secure transportation of sensitive scientific equipment to Building #102 in Adelphi, Maryland, under FOB Destination terms, meaning ownership and risk transfer only occur upon delivery at the specified location. The shipment must adhere to strict chain-of-custody protocols to ensure continuous accountability and integrity of the equipment throughout transit, with authorized personnel documenting each handoff and handling step. Comprehensive insurance coverage is mandatory to protect against loss, damage, or theft during transport, and the contractor is responsible for meeting all regulatory and security standards applicable to Department of Defense shipments. The work is classified as a subcontract under NAICS code 484220, which pertains to specialized freight trucking, and the response deadline is July 30, 2026, with the solicitation posted on July 23, 2026. Performance is strictly limited to the Adelphi, MD, delivery site, and the contracting entity is the Department of Defense through its W6QK Acc-Apg Adelphi office.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE