Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

High-Reliability Alternating Current Generator Manufacturing

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the manufacture and delivery of eighteen high-reliability alternating current generators designated as NSN FD20302500530 and part number 28B58-9B, intended for military aviation use. These units must be produced with Class 1 castings and incorporate proper corrosion under insulation (CUI) handling procedures to ensure operational integrity under extreme environmental conditions. Compliance with MIL-STD-2175 and applicable AMSC codes is mandatory, ensuring adherence to the highest standards of design, testing, and performance required for defense applications. The work is being performed under a subcontract and falls under NAICS code 336413 for Aircraft Engine and Engine Parts Manufacturing, with the place of performance located in Tempe, Arizona, at ZIP code 85284. The contract is managed by the Department of Defense through the Ok DLA Aviation office based in Oklahoma City, with the solicitation posted on August 5, 2026.

General Info

Eighteen military-grade AC generators produced in Tempe, AZ, compliant with MIL-STD-2175 and Class 1 casting standards.

Agency

Department Of Defense → Ok DLA Aviation At Oklahoma CityView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

Tempe, AZ, 85284, USA

Set-Aside

NONE

Documents

This scope was carved out of SPRTA1-26-F-0093.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Generator, Alternating

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 5

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Ok DLA Aviation At Oklahoma City

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and delivery of 18 high-reliability military aviation generators (NSN: FD20302500530, PN: 28B58-9B) requiring Class 1 castings, CUI handling, and compliance with MIL-STD-2175 and AMSC codes.

Similar Contracts

Same NAICS industry code

Supply of Flexible Couplings (NSN 1660-00-560-4009)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Manufacturing of Bypass Indicators (Source Controlled/CSI)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

in about 1 month

CLUTCH SHOE, SET

Solicitation # SPE8E7-26-Q-0315

This contract is for the procurement of 70 sets of clutch shoes, identified by NSN 4140-01-548-8631. The items are designated as critical application items and are associated with part numbers 1002525-1 from Hamilton Sundstrand Corporation and 767121-9K from Kihomac Inc. A key exception specifies that each set must contain two clutch shoes rather than one, and they must be packaged accordingly. The agreement is a firm fixed price contract with a delivery requirement of 60 days after receipt of order. Shipping is FOB origin, with both inspection and acceptance occurring at the destination, specifically DLA Distribution Depot Hill. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to DLA master list technical and quality requirements, including RP001 for palletization and RQ011 for the removal of government identification from non-accepted supplies.

POSTED

about 9 hours ago

DEADLINE

PLATE, STRUCTURAL, AIRCRAFT

Solicitation # SPE4A7-26-R-XB39

This solicitation from the Department of Defense, specifically the ASC Supplier OE and AF Division, is for the procurement of one structural aircraft plate under National Stock Number 1560-00-327-0732. The contract is designated as a Total Small Business Set-Aside with a delivery requirement of 98 days after receipt of order. The agreement mandates strict adherence to DLA technical and quality requirements, including CMMC Level 2 certification and specific protocols for physical identification, packaging, and inspection at origin. Due to the nature of the technical data, the contract is subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specialized training to handle the controlled data.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

FERRULE, EXCITER-REC

Solicitation # SPE4A7-26-R-XB05

Solicitation SPE4A7-26-R-XB05 is a total small business set-aside for the procurement of Ferrule, Exciter-Rec (NSN 2995-01-087-4164). The Department of Defense, via the Defense Logistics Agency, is seeking an Indefinite Delivery Contract with a five-year base period and a total value not to exceed 350,000 dollars. The estimated annual demand is 280 units with a guaranteed minimum of 70 units. The contract utilizes firm fixed pricing, and the requested delivery timeline is 115 days after receipt of order with shipping terms set as FOB Destination. Due to the nature of the technical data, this procurement is subject to ITAR and EAR export controls, requiring contractors to hold an approved US/Canada Joint Certification Program certification. Additionally, contractors must provide a CMMC Level II Self-Assessment via the Supplier Performance Risk System. Quality and packaging standards are stringent, requiring compliance with MIL-STD-129 for marking, ASTM D3951 for packaging, and MIL-STD-1916 for sampling. Award decisions will be based on a comparative assessment of price and non-price factors, with significant weight placed on past performance and SPRS assessments. Invoicing and payment must be processed through the Wide Area WorkFlow system.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

GOVERNMENT FIRST ARTICLE TEST

Solicitation # SPE4A7-26-R-XB38

This solicitation, issued by the Department of Defense under the ASC Supplier OE and AF Division, is for the procurement of one cargo yoke assembly, identified by part number 0001S00000052. The contract is designated as a total small business set-aside and requires delivery within 715 days after the order is placed. The procurement is subject to strict export control regulations under ITAR and EAR, meaning technical data cannot be shared with foreign persons or exported without authorization from the Department of State or Commerce. To access this data, contractors must hold an approved US/Canada Joint Certification Program certification and complete specific DLA training and questionnaires.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

INDICATOR, BYPASS

Solicitation # SPE4A7-26-R-0755

Solicitation SPE4A7-26-R-0755 is a sealed bid for a Firm Fixed Price, Indefinite Quantity Contract (IQC) issued by DLA Aviation for the procurement of Bypass Indicators (NSN 2915-01-313-4615). The contract encompasses a five-year base period with a guaranteed minimum quantity of 20 units and an estimated annual requirement of 80 units. This item is designated as an Air Force Critical Safety Item (CSI) and is source-controlled, requiring manufacture and testing in accordance with specific limited rights data and basic drawing 99167 5907808. Due to the proprietary nature of the technical data package, only vendors with existing access to the data or traceability to approved sources are eligible to quote. The contract mandates strict quality and security compliance, including SAE AS9100 higher-level quality requirements and Cybersecurity Maturity Model Certification (CMMC) Level 2. Inspection and acceptance are conducted at the origin, with sampling performed according to MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Packaging must adhere to MIL-STD-2073-1E and RP001, while marking must comply with MIL-STD-129, including the contractor and manufacturer CAGE codes and part numbers. Delivery is specified as FOB Destination with a lead time of 308 days after receipt of order. Award determination will be based on a comparative assessment of price, past performance, and other evaluation factors, with SPRS assessments weighted most heavily within the past performance category.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

in about 1 month

PLATE ASSEMBLY, ROTARY RUDDER

Solicitation # SPE4A7-26-R-XB09

This contract is for the procurement of one Rotary Rudder Plate Assembly, identified by NSN 1615-01-305-3967. The agreement is established as a Firm Fixed Price contract with a delivery requirement of 101 days after the order. Inspection and acceptance are both set to occur at the origin, with shipping terms designated as FOB Destination. The procurement is subject to rigorous quality and technical standards, including CMMC Level 2 self-assessment, DLA packaging requirements, and specific sampling methods per MIL-STD-1916 or ASQ H1331. The item is classified as a critical application item, with approved sources including Rotair Aerospace Corp, Aero Components LLC, Sikorsky Aircraft Corporation, and Essner Manufacturing LP. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

Drone cases and batteries

Solicitation # 27728

The Chickasaw Nation is seeking quotes for the procurement of drone cases and batteries under solicitation number 27728. This opportunity was posted on September 11, 2026, and requires responses to be submitted by the deadline of September 16, 2026. Interested parties can find further details and submit their bids through the Chickasaw Business Network portal. For additional inquiries, the point of contact is Briten Andrews via email.

Chickasaw Nation

POSTED

about 13 hours ago

DEADLINE

Composite Material Manufacturing

POSTED

about 14 hours ago

DEADLINE

Supply of Landing Gear Wear Pads (Main Gear Brake System)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

Manufacturing of Duct Assembly, Heat Exchanger (NSN 1560-00-264-1351)

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 14 hours ago

DEADLINE

More opportunities from Department Of Defense → Ok DLA Aviation At Oklahoma City

Same awarding agency

Defense-Grade Packaging and Transportation Services

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Critical Safety Item (CSI) Component Fabrication

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Control, Exhaust Noz (3B)

Solicitation # SPRTA126R1778

The Department of Defense, through the Ok DLA Aviation At Oklahoma City office, has issued a presolicitation notice for the procurement of Control, Exhaust Noz (3B). This requirement is categorized under NAICS code 336412 and is managed by the office located at Tinker AFB in Oklahoma. The solicitation, identified by number SPRTA126R1778, was posted on September 11, 2026, with a response deadline set for September 26, 2026. Rhonda Griffin serves as the primary point of contact for this opportunity.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 14 hours ago

DEADLINE

BEARING,ROLLER,CYLI

Solicitation # SPRTA126Q0373

This procurement request, identified by solicitation number SPRTA126Q0373, is for the acquisition of cylindrical roller bearings, part number 4035597. The government seeks a quantity of 20 units, with a minimum of 5 and a maximum of 33, to be delivered to destination SW3211 by January 31, 2027. This item is designated as a critical safety item and is subject to export controls, requiring first article inspection and specific qualification requirements. The solicitation is expected to be issued on September 28, 2026, and close on October 29, 2026. While the government has identified several approved sources, including RTX Corporation, The Timken Company, Schaeffler Aerospace Canada, SKF USA, and Industrial Tectonics Bearings, it is open to considering capability statements from other responsible sources. The contract is not a small business set-aside and involves technology with military or space applications. Final award decisions will be based on a combination of price, technical capability, and past performance.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 14 hours ago

DEADLINE

T-56 Amplifier, Electroni

Solicitation # SPRTA126Q1494

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Hydraulic Drive Unit_End_Item_F-16_NSN_1650013080839_PN_16VM003001-5

Solicitation # FD20302700311

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

in about 1 month

ACUATOR, ELCTRO-ME_End_Item_KC-46_NSN_1680016533265KT_PN_R15062-6

Solicitation # FD20302700310

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

Fuel Pressure Valve_End_Item_J85_NSN_2915008960173OK_PN_37C301344G002

Solicitation # FD20302600142

POSTED

about 14 hours ago

DEADLINE

Pump, Fuel, Jet Engin (3B)

Solicitation # SPRTA126R1792

Solicitation SPRTA126R1792, issued by the Department of Defense DLA Aviation at Oklahoma City, is a request for the new manufacture of Critical Safety Item fuel pumps for F110 jet engines. The requirement is for an estimated quantity of 58 units, with a flexible range between 14 and 87 units, to be delivered to Tinker AFB, OK, by May 31, 2027. The items are identified by NSN 2915013548333PR and part numbers 9338M20P08 / 5010069, consisting of aluminum alloy construction. Proposals are due by October 13, 2026, and the award decision will be based on a combination of price and past performance, with the government utilizing the Supplier Performance Risk System to assess item, price, and supplier risk. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073 for preservation and MIL-STD-129 and MIL-STD-130 for marking and Item Unique Identification. Due to the nature of the components, specific packaging for residual fuel and heat-treated debarked wood for containers are required. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and reporting, compliance with the Federal Acquisition Supply Chain Security Act, and adherence to Buy American and cybersecurity maturity model certification levels. Offerors must provide separate proposals for any Non-Recurring Engineering expenses and submit cost and pricing data in accordance with FAR 15.403-3.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Manufacturing of F-100 Aircraft Fan Ducts

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Supply of Regulating Valves for F-16 Aircraft

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Aerospace-Grade Steel and Aluminum Supply

Primary Smelting and Refining of Nonferrous Metal (except Copper and Aluminum)

POSTED

DEADLINE

in about 2 months

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS