Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

HOUSING,CENTRIFUGAL

Active
N0038326QTC30Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicitation titled HOUSING, CENTRIFUGAL under solicitation number N0038326QTC30 is issued by the Naval Supply Systems Command Weapon Systems Support, a Department of Defense agency based in Philadelphia, Pennsylvania. The solicitation was posted on August 7, 2026, with a response deadline of September 8, 2026, and is aimed at procuring centrifugal housing components. Contract performance details are not yet specified, but early and incremental deliveries are preferred. The NAICS code 333413 identifies the industry as pump and pumping equipment manufacturing. Mandatory compliance requirements include the use of Workflow Pro's Assist Module, adherence to Buy American Act provisions, Security Prohibitions and Exclusions, Equal Opportunity for Workers with Disabilities, and the mandatory use of Wide Area Workflow for payment instructions. The contractor must provide certifications related to domestic content, trade agreements, and payment compliance. Offeror information may be released under Navy guidelines for AbilityOne support contractors, and all contractual documents are deemed issued upon electronic transmission via email or other secure methods. The primary point of contact is Kelly A. Gipson, reachable by email and phone.

General Info

Procure centrifugal housing via N0038326QTC30; Buy American, Workflow Pro, Wide Area Workflow required; deadline September 8, 2026.

Agency

Department Of Defense → Navsup Weapon Systems SupportView Agency

NAICS

333413 - Industrial and Commercial Fan and Blower and Air Purification Equipment ManufacturingView NAICS

Place of Performance

PA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support
Contacts1 person available
OfficePHILADELPHIA, PA, 19111-5098, USA
Organization / Agency
Department Of Defense → Navsup Weapon Systems Support
View Agency Profile
Office AddressPHILADELPHIA, PA, 19111-5098, USA
Contacts
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CONTACT INFORMATION|4|N791.10|T1M|7712290443|kelly.a.gipon2.civ@us.navy.mil| ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT|8||||||||| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|Invoice and receiving report||TBD|N00383|TBD|TBD|SEE SCHEDULE|TBD||||||||| NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1|| MANDATORY USE OF WORKFLOW PRO (WFP) MOD ASSIST MODULE|1|N79 PAC| EQUAL OPPORTUITY FOR WORKERS WITH DISABILITIES (DEV 2026-O0040)(FEB 2026)|4||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024)|11|||||||||||| SECURITY PROHIBITIONS AND EXCLUSIONS (CLASS DEVIATION 2026-O0025)(FEB 2026)|7|||||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024))|5|||||| BUY AMERICAN--BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024)|1|| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2026-O0043)(FEB 2026))|13|||||||||||||| ROYALTY INFORMATION (APR 1984)|1|| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PREPAREDNESS, ANDENERGY PROGRAM USE (APR 2008))|2||x| ALL CONTRACTUAL DOCUMENTS (I.E. CONTRACTS, PURCHASE ORDERS, TASK ORDERS DELIVERY ORDERS AND MODIFICATIONS) RELATED TO THE INSTANT PROCUREMENT ARE CONSIDERED TO BE "ISSUED" BY THE GOVERNMENT WHEN COPIES ARE EITHER DEPOSITED IN THE MAIL, TRANSMITTED BY FACSIMILE, OR SENT BY OTHER ELECTRONIC COMMERCE METHODS, SUCH AS EMAIL. THE GOVERNMENT'S ACCEPTANCE OF THE CONTRACTOR'S PROPOSAL CONSTITUTES BILATERAL AGREEMENT TO "ISSUE" CONTRACTUAL DOCUMENTS AS DETAILED HEREIN. EARLY AND INCREMENTAL DELIVERIES ACCEPTED AND PREFERRED.

Similar Contracts

Same NAICS industry code

NAICS: 333413
New
Federal
Elevate Generator Exhaust Stack, P-12420
Solicitation # W91QVN26RA081
This contract, titled Elevate Generator Exhaust Stack, P-12420, is issued under solicitation number W91QVN26RA081 by the Department of Defense through the Office of Contract Augmented, located in APO, AP 96271-5289. The opportunity is restricted to vendors in Area III MATOC and is classified as a combined solicitation with no set-aside designation. The North American Industry Classification System code is 333413, indicating it pertains to the manufacturing of other commercial and service industry machinery. The solicitation was posted on August 7, 2026, and responses must be submitted by 4:00 a.m. Eastern Time on August 14, 2026. The primary point of contact for inquiries is Myong Hui Hong, reachable at myonghui.hong.ln@army.mil. The place of performance details are not specified, and the contract is exclusively tied to the specified vendor area, requiring potential bidders to confirm eligibility before submission.
0411 Aq Hq Contract Augmented

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333413
New
Federal
DDWG Fans
Solicitation # SP330026Q0183
This solicitation, identified as SP330026Q0183 and titled DDWG Fans, is a firm-fixed-price purchase order issued by DLA Distribution under the Department of Defense for the procurement of industrial warehouse fans to be delivered to Warner Robins, Georgia. The acquisition is exclusively reserved for Service-Disabled Veteran-Owned Small Businesses under NAICS code 333413 and will be awarded via Standard Form 1449. The purpose of the purchase is to mitigate extreme heat conditions at Robins Air Force Base, ensuring worker safety, OSHA compliance, and uninterrupted production operations. The fans must meet strict technical specifications including physical dimensions of 36 1/2" x 37 7/8" x 18 5/8", compatibility with 120V, 208V, or 480V three-phase power systems, a minimum 10' 7" integrated power cord, a maximum operating noise level of 77 dB, and a totally enclosed motor design (TENV or TEFC) to resist dust and particulates. Safety features require OSHA-compliant finger guards to prevent blade contact. The solicitation was originally posted on June 9, 2026, with multiple amendments issued through June 24, 2026, extending the response deadline and incorporating additional documentation including the SF1449 form and CSS. No DPAS rating applies to this procurement, and while the place of performance is clearly identified, details regarding quantity, pricing, delivery schedule, period of performance, and inspection criteria are not specified in the available information. All offerors must be certified SDVOSBs and the award will be made to a single vendor based on compliance with technical requirements and pricing.
DLA Distribution

POSTED

about 23 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333413
New
Federal
Supply of Commercial HEPA Air Scrubbers
Phoenix Area Indian Health Svc

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 333413
New
Federal
4460--CANCELLATION - Industrial HVAC Air Filters - 5 Year IDIQ Erie VA Medical Center
Solicitation # 36C24426Q0651
The Department of Veterans Affairs is seeking qualified small businesses to enter into a five-year Firm Fixed Price Indefinite Delivery/Indefinite Quantity (IDIQ) contract for the supply of high-efficiency HVAC air filters to the Erie VA Medical Center in Erie, Pennsylvania. This solicitation, identified as 36C24426Q0651, is a total small business set-aside under FAR 19.5, restricted to businesses meeting the NAICS code 333413 with a size standard of 500 employees. The contract will require the just-in-time delivery of specified HVAC filters, including models such as the 12x24x12 MERV 11 Airflow Pak Rigaflow Metal and 12x24x12 MERV 13-A Camfil Hi-Flo ES, with deliveries scheduled one to three weeks prior to monthly needs as ordered under the IDIQ. All shipments must be FOB destination, properly packaged to prevent damage, and accompanied by electronic delivery tickets and scanned copies submitted to the designated VA point of contact. Evaluation will follow a Lowest Priced Technically Acceptable (LPTA) process, where technical compliance with the Statement of Need is a mandatory pass/fail gate, and the lowest-priced technically acceptable offer will be selected. The contract imposes stringent compliance obligations, including mandatory registration and continuous maintenance of an active SAM account, adherence to the Buy American Act, and verification of OEM authorization if the offeror is not the manufacturer. Contractors must also comply with VA-specific requirements such as records management training for all employees handling records, and must maintain an emergency action plan to ensure uninterrupted performance during declared state or national emergencies. Invoicing must be submitted electronically via the Tungsten Network in accordance with VAAR 852.232-72, and payments will be processed through the Austin Payment Center upon government inspection and acceptance at the time of delivery. The Government reserves the right to reject nonconforming items without additional cost to the Government and expects full compliance with federal statutes including prohibitions on kickbacks, procurement integrity, and Fly American provisions. Any amendments, such as the extension of the quote deadline from June 29, 2026 to July 3, 2026, are issued to clarify requirements and address inquiries, and all submissions must strictly follow the instructions outlined in the SF 1449 form and include required certifications, descriptive literature, and
244-NETWORK Contract Office 4 (36C244)

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 333413
New
Federal
41--IMPELLER,FAN,AXIAL
Solicitation # SPE8E726T3540
The procurement is for 25 axial fan impellers, identified by NSN 4140007587686, to be delivered to DLA Distribution in Corpus Christi, Texas, with a delivery deadline 167 days after award. The solicitation, numbered SPE8E726T3540, is a Small Business Set Aside under NAICS code 333413 and is exclusively open to responsible small business concerns. Quotes must be submitted electronically via the SAM.gov portal; no hard copies are available, nor are any specifications, plans, or drawings provided. The approved source for this item is 04320 2660-1624-01. The solicitation was posted on August 6, 2026, with responses due by August 17, 2026. All inquiries must be directed via email to the designated point of contact at DibbsBSM@dla.mil, with additional information accessible through the provided SAM.gov link or the DIBBS website using the solicitation number. The contracting office is located in Philadelphia, Pennsylvania, under the Department of Defense’s DLA Troop Support.
DLA Troop Support

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 333413
New
Federal
WRSU - Air Scrubbers
Solicitation # IHS1529103
The contract solicits new commercial HEPA air scrubbers for smoke mitigation during wildfire events under the Buy Indian Act and HHSAR Subpart 326.6, using the simplified commercial acquisition procedures of FAR Part 12 as revised under Executive Order 14275. This request for quotation is exclusively for original equipment manufactured units, with no allowance for remanufactured or gray market products; vendors must be authorized distributors, dealers, or resellers of the OEM, providing verifiable proof of authorization through an official letter from the manufacturer to ensure full OEM warranty and service coverage remain intact. All equipment must be covered by the manufacturer’s standard warranty terms, and failure to submit this authorization will disqualify the quotation. The solicitation number is IHS1529103, issued by the Phoenix Area Indian Health Service under the Department of Health and Human Services, with a NAICS code of 333413 and a small business size standard of 500 employees. The procurement is set aside for Indian Small Business Economic Enterprise, and responses are due by August 17, 2026, at 8:00 PM Eastern Time. The place of performance is Whiteriver, Arizona, with the contract office located in Phoenix, Arizona. Primary point of contact is Jimmy Perry, reachable at jimmy.perry@ihs.gov or 602-364-5266, with Jeremy Steel as the secondary contact. This announcement serves as the sole solicitation document, and no additional written solicitation will be issued.
Phoenix Area Indian Health Svc

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 333413
New
DIBBS
Commercial Fan Supply (NSN 4140014782409)The contract requires the supply of 63 circulating fans designated by military NSN 4140014782409, with all units must comply with applicable technical and performance specifications. The procurement is issued under subcontract and falls under NAICS code 333413, indicating it targets manufacturers of heating, ventilation, and air-conditioning equipment. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, and the place of performance is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The contracting activity originates from the DDSP New Cumberland Facility under the Department of Defense, and all deliveries are expected to meet military standards for reliability, durability, and operational suitability in defense environments.
DDSP NEW CUMBERLAND FACILITY

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 333413
New
DIBBS
Manufacture of Fan/Vaneaxial UnitsThe contract mandates the fabrication, assembly, and testing of specialized fan and vaneaxial units meeting stringent technical specifications established by the Defense Logistics Agency, including requirements outlined in RQ011 and RA001, as well as defined performance standards. These units are critical components requiring precision manufacturing and rigorous quality control to ensure operational reliability under demanding conditions. The work must be performed in accordance with federal defense procurement guidelines and delivered to the designated place of performance in Bremerton, Washington, with the zip code 98314-6001. This is a subcontract opportunity under NAICS code 333413, categorized under the Department of Defense’s Puget Sound organization. Proposals must be submitted by the response deadline of August 17, 2026, and the solicitation was posted on August 5, 2026. All parties interested in bidding must comply with the technical, quality, and delivery requirements without exception, as failure to meet these standards may result in disqualification or contract termination. The contract is not subject to a specific set-aside designation and is accessible via the DIBBS portal for further details.
PUGET SOUND

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 333413
New
DIBBS
Tube Axial Fan Supply and ManufacturingThe contract entails the manufacture and supply of 82 tube axial fans specifically built to meet military technical drawings and specifications, ensuring full compliance with MIL-STD-2073-1E for packaging and MIL-STD-129K for marking standards. The equipment must be produced and delivered in accordance with rigorous defense industry requirements, with all units destined for performance at Tinker Air Force Base, identified by the ZIP code 73145-8000. The solicitation falls under the NAICS code 333413, classifying it as part of the heating, ventilation, and air conditioning equipment manufacturing sector, and is structured as a subcontract opportunity under the Department of Defense’s Construction & Equipment MRO SVC I agency. The opportunity was posted on August 5, 2026, with a firm response deadline of August 17, 2026, requiring interested parties to submit proposals within this narrow window to be considered for award.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 333413
New
DIBBS
Tube Axial Fan Supply (COTS Component)A single NSN-compliant tube axial fan, identified by NSN 4140010667883, is being procured for installation on a U.S. Navy vessel under a subcontract agreement. The item must be a commercial off-the-shelf component that fully meets all applicable military specifications for packaging, marking, and inspection to ensure compatibility and operational readiness in naval environments. The contract is managed by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense and is targeted for delivery to a military address with a FPO location and ZIP code 96692-7200. All responses to the solicitation are due by August 13, 2026, with the request for quotation posted on August 5, 2026. The NAICS code 333413 indicates classification under ventilating and air conditioning equipment manufacturing. The contract does not specify a set-aside type or point of contact, and all compliance must align with standardized DoD procurement protocols for critical maritime components.
ASC SUPPLIER OPER OEM DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 333413
New
DIBBS
Circulating Fan Supply and Delivery
RED RIVER RECEIVING BLDG

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 333413
New
DIBBS
Supply of Fan/Oil Circulating Unit (NSN: 4140005296005)The contract requires the manufacture, testing, packaging, labeling, and delivery of exactly 42 units of a military-specification fan and oil circulating unit identified by NSN 4140005296005, with full compliance to defense logistics and safety standards. The scope encompasses all phases of production from fabrication to final delivery, ensuring each unit meets stringent military operational requirements and is properly documented for integration into defense supply chains. Performance must occur at the designated location in New Cumberland, Pennsylvania, with zip code 17070-5002, and the work is under the oversight of the DDSP New Cumberland Facility, a Department of Defense entity. This is a total small business set-aside subcontract under the SBA program as defined by FAR 19.5, exclusively reserved for small businesses, and falls under NAICS code 333413 for other commercial and service industry machinery manufacturing. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and is accessible via the DIBBS platform. All deliverables must adhere to military compliance protocols and be submitted in full readiness for immediate acceptance and deployment within defense systems.
DDSP NEW CUMBERLAND FACILITY

POSTED

3 days ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → Navsup Weapon Systems Support

Same awarding agency

NAICS: 811212
New
Federal
Anti-Counterfeit Electronic Parts Inspection ServicesThe contract calls for comprehensive inspection services to detect and prevent the introduction of counterfeit electronic components into the supply chain, in full compliance with DFARS 252.246-7007. This includes rigorous supplier screening to verify the legitimacy of vendors, authentication of components using approved methodologies, and end-to-end traceability to ensure every part can be tracked from origin to final assembly. Any non-conforming or suspected counterfeit items must be promptly identified, quarantined, and reported through formal procedures to ensure regulatory adherence and mission integrity. The work is classified as a subcontract under the NAICS code 811212 and is being managed by the Naval Supply Systems Command Weapon Systems Support on behalf of the Department of Defense. The opportunity was posted on August 7, 2026, with responses due by September 11, 2026, and performance is expected to support critical defense systems requiring uncompromised electronic component reliability.
Computer and Office Machine Repair and Maintenance

POSTED

about 23 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541512
New
Federal
Cybersecurity Compliance and CMMC Support ServicesThe contract seeks services to support compliance with DFARS and CMMC requirements for organizations handling covered defense information, encompassing the development of System Security Plans, conducting comprehensive risk assessments, delivering tailored training programs, and preparing for official audits. These services are critical to ensuring that contractors meet the Department of Defense’s cybersecurity standards and maintain authorization to process, store, or transmit sensitive defense data. The work involves a full lifecycle approach to cybersecurity readiness, from initial gap analysis through ongoing implementation and audit readiness, with a focus on practical, actionable outcomes aligned with NIST SP 800-171 and CMMC framework controls. The contract is classified as a subcontract under NAICS code 541512, indicating it is for computer systems design and related services, and is issued by the Naval Supply Systems Command Weapon Systems Support under the Department of Defense. Although the specific place of performance and point of contact are not provided, the submission deadline is September 11, 2026, and the opportunity was posted on August 7, 2026. The effort is intended to enable defense contractors to achieve and sustain compliance without internal expertise, emphasizing structured support to mitigate risk and meet regulatory obligations across the defense industrial base.
Computer Systems Design Services

POSTED

about 23 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 493190
New
Federal
Defense-Grade Packaging and Marking ServicesThe contract requires comprehensive packaging, labeling, and marking services for repaired fuel panels destined for overseas deployment, with strict adherence to U.S. military standards including MIL-STD-129 for external packaging, MIL-STD-130 for item identification, and IUID requirements for unique item tracking. All work must ensure full compliance with Department of Defense protocols to guarantee traceability, durability, and interoperability across global supply chains. The contractor is responsible for implementing standardized marking procedures that meet federal specifications for durability under harsh environmental conditions and for supporting logistics operations with accurate, machine-readable data. This is a subcontract under the Navsup Weapon Systems Support division of the Department of Defense, classified under NAICS code 493190 for other transportation support activities. Proposals must be submitted by September 11, 2026, with performance expected to support defense logistics networks globally. While the exact location of performance is unspecified, the work is critical to the readiness and deployment of military equipment, demanding precision, accountability, and adherence to federal defense packaging and identification mandates without exception.
Other Warehousing and Storage

POSTED

about 23 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541380
New
Federal
Electronic Component Testing and Calibration ServicesThe contract seeks specialized testing, calibration, and verification services for electronic subcomponents within fuel panels, requiring strict adherence to MIL-STD specifications and ESD protection protocols to ensure operational reliability and environmental resilience. All work must be performed to meet Department of Defense quality and compliance benchmarks, with emphasis on precision, traceability, and documentation of test results for audit readiness. The services are designated as a subcontract under NAICS code 541380 and are managed by Navsup Weapon Systems Support under the Department of Defense. The opportunity was posted on August 7, 2026, with a firm response deadline of September 11, 2026, at 8:00 PM, leaving no flexibility for late submissions. The place of performance and point of contact details are not specified in the available data, and no set-aside provisions apply, meaning the contract is open to all qualifying entities regardless of small business status or other classifications.
Testing Laboratories and Services

POSTED

about 23 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336412
New
Federal
Aerospace Fuel Panel Repair and Overhaul ServicesThe contract calls for the complete repair, overhaul, and functional testing of fuel management panels to meet original equipment manufacturer specifications. This includes full disassembly of the panels, replacement of degraded or faulty components, precise calibration of systems, and rigorous performance verification to ensure operational readiness and compliance with technical standards. All work must be performed using approved methodologies and documented to demonstrate adherence to OEM requirements throughout every phase of the process. The solicitation is issued as a subcontract under the NAICS code 336412, indicating it falls within the aerospace manufacturing and component repair sector. It is managed by the Naval Supply Systems Command Weapon Systems Support under the Department of Defense, with a response deadline of September 11, 2026. There is no designated setaside classification or specific location for performance listed, and the offeror must be prepared to fulfill all contractual obligations without reliance on location-specific constraints or special procurement preferences.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 23 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334511
New
Federal
59--ANTENNA, IN REPAIR/MODIFICATION OF
Solicitation # N0038326RPC65
The contract pertains to the acquisition of a flight-critical antenna component under NSN 7R-5985-015686919-E8, with a quantity of four units to be delivered FOB origin. Due to the unique design capability, proprietary manufacturing knowledge, and specialized technical data held exclusively by previously approved sources, procurement is restricted to those entities previously vetted and authorized by the Government. The item requires formal engineering source approval prior to contract award, as the available technical data is insufficient to support full and open competition, and the qualification of any new supplier would take longer than the timeline allows. Only preapproved sources have been solicited, and any entity not currently approved must submit comprehensive documentation aligned with the NAVSUP Weapon Systems Support Source Approval Information Brochures for spares or repair, depending on the nature of their proposed involvement. Failure to provide complete and accurate information as specified will result in disqualification from consideration. Requests for source approval already under evaluation at NAVSUP WSS must include a copy of the original submission cover letter. The Government is pursuing this acquisition under FAR 6.302-1, allowing sole-source negotiation due to the absence of qualified alternate suppliers and the critical nature of the component. While the notice is not a request for competitive proposals, all responsible parties may submit capability statements within 45 days of the publication date, or 30 days if under an existing Basic Ordering Agreement. Offers must conform strictly to the source approval requirements, and the Government retains full discretion to proceed without competition based on operational needs and market assessments. Commercial item acquisition policies under FAR Part 12 are not being applied, but interested vendors may still declare if they can meet the requirement with a commercial item within 15 days. Technical specifications and associated documents may be accessed via ASSIST-Online or the DODSSP, though drawings, patterns, and deviation lists are not stocked there. Proposals must be directed to the designated point of contact, Chris Campellone, and submitted prior to the September 21, 2026 deadline.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 23 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334416
New
Federal
59--RESISTOR FEEDBACK A
Solicitation # N0038326QPC53
The contract solicitation involves the procurement of six units of a resistor feedback component identified by NSN 1R-5905-011820286-EY, TDP VER 006, with delivery terms specified as FOB origin. All offers must comply with qualification requirements in place at the time of award, as governed by FAR clause 52.209-1, and the government has determined that commercial item acquisition policies under FAR Part 12 do not apply to this procurement. Interested parties are directed to obtain all applicable Military and Federal Specifications, Standards, QPLs, QPDs, and Military Handbooks through the DoD Single Stock Point via DAPS in Philadelphia, with most documents accessible online through ASSIST-Quick Search at quicksearch.dla.mil. Those unable to access internet resources may contact the DODSSP ASSIST Help Desk by phone or mail for document requests. The solicitation number is N0038326QPC53, posted on August 7, 2026, with a response deadline of September 22, 2026, and no set-aside designation has been assigned. The requesting organization is the Naval Supply Systems Command Weapon Systems Support, based in Philadelphia, Pennsylvania, and the primary point of contact for inquiries is Shamus F. Roache, reachable via email or phone. The component’s official title is 59--RESISTOR FEEDBACK A, and any offeror wishing to propose a commercial item alternatives must notify the contracting officer within fifteen days of the notice date.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 23 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 335312
New
Federal
61--PANEL,CONTROL,ELECT, IN REPAIR/MODIFICATION OF
Solicitation # N0038323QD043
Motor and Generator Manufacturing

POSTED

about 23 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
ROD,SUPPORT,LOWER
Solicitation # N0038326QTC26
The contract pertains to the procurement of ROD SUPPORT LOWER under solicitation number N0038326QTC26, issued by the Naval Supply Systems Command Weapon Systems Support, part of the Department of Defense, with the primary point of contact being Kelly A. Gipson at the Philadelphia, Pennsylvania office. The solicitation was posted on August 7, 2026, with a response deadline of September 8, 2026, and is classified under NAICS code 336413, indicating it relates to aircraft propulsion and engine parts manufacturing. Contractual documents are deemed issued upon electronic transmission or mailing, and the government’s acceptance of the proposal constitutes a binding agreement. Early and incremental deliveries are preferred and accepted. Mandatory requirements include the use of Workflow Pro Assist Module, compliance with Buy American Act provisions, adherence to security prohibitions and exclusions under a 2026 deviation, and adherence to equal opportunity standards for workers with disabilities. The contract also enforces mandatory use of Wide Area Workflow for payments and requires compliance with priority rating notices for national defense and energy programs. Contractor submissions must include applicable certifications related to the Balance of Payments Program and Free Trade Agreements, and offeror information is subject to release pursuant to Navy protocols for AbilityOne support contractors. Royalty obligations and annual representations are also binding.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 333612
New
Federal
16--GEARBOX,INPUT MODUL, IN REPAIR/MODIFICATION OF
Solicitation # N0038326RFB28
The U.S. Navy’s Naval Supply Systems Command Weapon Systems Support in Philadelphia is seeking to procure the repair of seven input gearboxes, part number X0606-01093-042 with NSN 7R-1615-017032801-H5, on a sole source basis from Sikorsky under the existing Basic Ordering Agreement N00383-26-G-P401. No technical drawings or data are available, and the government does not hold rights to any proprietary information required to source the part from alternate suppliers, making Sikorsky the only viable source under 10 U.S.C. 3204(a)(1) and FAR 6.302. The acquisition will follow FAR Part 15 procedures, excluding commercial item acquisition policies under FAR Part 12, and will not be set aside for small businesses. All responsible sources may submit capability statements or proposals within 45 days of the synopsis date, but the government intends to evaluate and award to Sikorsky exclusively. Any firm not already approved to manufacture this item must submit a Source Approval Request, though the procurement will proceed without waiting for such approvals. Electronic submissions via email to Kate N. Schalck are required; no hard copies or telephone inquiries will be accepted. The solicitation will be published through NECO, with a response deadline of September 21, 2026, and delivery will be FOB origin.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 23 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 811210
New
Federal
49--TEST PROGRAM SET, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QFB16
The U.S. Navy, through NAVSUP Weapon Systems Support in Philadelphia, intends to award a sole source repair contract for two Test Program Sets with part number H641 and NSN 7R-4920-016667514-SX to Howell Instruments INC under authority of 10 U.S.C. 3204(a)(1) and FAR 6.302. The Government does not own the technical data or design rights for this item and has determined that no other supplier can satisfy the requirement due to the proprietary nature of the component. Delivery will be FOB origin and the acquisition will follow FAR Part 15 procedures, excluding the commercial items framework of FAR Part 12. All responsible sources are invited to submit capability statements or proposals within 45 days of the synopsis, but the Government anticipates only one acceptable offer and will not delay the repair to await a Source Approval Request from other firms. The solicitation will be conducted electronically through NECO with no hard copies mailed or telephone inquiries accepted. The point of contact for submissions and inquiries is Kate N. Schalck, whose email is provided for capability and qualification submissions. This effort is not set aside for small businesses and no competitive bidding is currently planned, though any received proposals will be evaluated solely to determine if competition is feasible. The repair must proceed without interruption, and firms not previously approved to perform such work must still submit a Source Approval Request, though this will not affect the timeline. The solicitation posting date is August 7, 2026, with responses due by September 21, 2026, and the contract will be managed under the assigned solicitation number N0038326QFB16.
Electronic and Precision Equipment Repair and Maintenance

POSTED

about 23 hours ago

DEADLINE

in about 1 month
View Details
New
Federal
49--FILTER SET
Solicitation # N0038326QPC57
The contract pertains to the procurement of 49 filter sets under NSN 1R-4920-998448673-SX, with delivery terms set at FOB origin. This item is classified as flight critical, necessitating prior Government source approval for any contractor to be eligible for award. Only pre-approved sources have been solicited due to incomplete or insufficient technical data that prevents open competition. Proposals from non-approved sources must include complete documentation as outlined in the NAVSUP Weapon Systems Support Source Approval Information Brochures, specific to whether the offeror has prior experience producing the item or is submitting for the first time. Failure to submit all required documentation or proof of a previously submitted approval request will disqualify the offer. If source approval cannot be finalized in time to meet operational timelines, award may proceed based on Fleet support needs. The Government is not leveraging FAR Part 12 commercial item acquisition policies, though potential offerors may still propose commercial alternatives within 15 days of this notice. Technical specifications, military standards, and related documents can be obtained through ASSIST-Online or the DODSSP, with internet access recommended for retrieval. All awards are contingent on the offeror, product, and manufacturer meeting qualification criteria at the time of award, as mandated by FAR clause 52.209-1. Additional inquiries may be directed to the designated point of contact, Abbey R. Ettinger, at the specified email and phone number.

POSTED

about 23 hours ago

DEADLINE

in about 1 month
View Details