Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Hull and Structural Repair Services

Active

Federal

Response Deadline10/05/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Hull and Structural Repair Services supports the Puget Sound Naval Shipyard IMF under the Department of Defense for work on the YRBM-50 Navy vessel. The scope of work involves performing structural repairs to the hull, freeboard, and exterior decks, including the repair of watertight hatches, doors, access covers, and hawse hole bull's eyes. Technical requirements include conducting ultrasonic plating thickness measurements and performing necessary repairs to areas falling below minimum thickness using steel welding equipment. The project requires personnel to hold Hot Work and Welding certifications to deliver certified structural repairs and redline drawings. This opportunity is designated as a Total Small Business Set Aside under NAICS code 488111. The solicitation was posted on September 3, 2026, with a response deadline of October 5, 2026.

General Info

Small business subcontract for hull and structural repairs on Navy vessel YRBM-50.

Agency

Department Of Defense → Puget Sound Naval Shipyard IMFView Agency

NAICS

488111 - Air Traffic ControlView NAICS

Place of Performance

WA

Set-Aside

SBA

Documents

This scope was carved out of N4523A26R1002.

The full solicitation package (13 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Maintenance, Repair, and Preservation of YRBM-50

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 3

subcontract

Response DeadlineOct 5

Submission deadline

Response Deadline

10/05/2026, 07:00:00 PM UTCin 27 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Puget Sound Naval Shipyard IMF

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Puget Sound Naval Shipyard IMF

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs structural repairs to the hull, freeboard, and exterior decks for prime contractors on Navy vessel projects, here the YRBM-50. Conducts ultrasonic plating thickness measurements, repairs areas below minimum thickness, and repairs access covers, watertight hatches, doors, and hawse hole bull's eyes. Uses ultrasonic thickness gauges and steel welding equipment. Requires Hot Work/Welding certifications. Delivers certified structural repairs and redline drawings.

Similar Contracts

Same NAICS industry code

Marine Propulsion and Steering RepairThis subcontract for Marine Propulsion and Steering Repair is issued by the Puget Sound Naval Shipyard IMF under the Department of Defense. The project involves performing critical maintenance and repairs on movement and steering systems for prime contractors working on Navy vessel projects, specifically the YRBM-50. The scope of work includes executing main propulsion repairs, steering system repairs, and general machinery system maintenance in accordance with marine mechanical engineering standards to deliver fully functional systems. The opportunity is designated as a total Small Business Set Aside under NAICS code 488111. It was posted on September 3, 2026, with a response deadline of October 5, 2026. The contract requires the use of specialized propulsion machinery tools and steering gear components to ensure all vessel systems meet operational requirements.

Puget Sound Naval Shipyard IMF

POSTED

DEADLINE

Utility Vehicle Towing and Transport ServicesThis subcontract opportunity for Utility Vehicle Towing and Transport Services involves the pickup, transportation, and return of ATVs, UTVs, and golf carts for prime contractors at Andersen Air Force Base. The selected provider will use flatbed tow trucks or utility trailers to move these vehicles between government sites and maintenance facilities in Yigo. Personnel must possess DBIDS access for base entry and a commercial driver's license where applicable to ensure the secure delivery of vehicles to designated facilities. Managed by the Department of Defense under the FA5240 36 Cons Lgc agency, this project is designated as a total Small Business Set Aside under NAICS code 488111. The solicitation was posted on September 3, 2026, with a response deadline of September 10, 2026.

FA5240 36 Cons Lgc

POSTED

DEADLINE

Military Packaging and Marking SpecialistThis subcontract opportunity for a Military Packaging and Marking Specialist supports prime contractors delivering goods to the Department of Defense ASC Commodities Division. The selected provider will be responsible for specialized packaging and identification marking of components to ensure they are ready for military shipment and storage. All work must strictly adhere to RP001 for packaging, MIL-STD-130N for identification markings, and MIL-STD-129 for shipment and storage markings using industrial equipment. The project is designated as a Total Small Business Set-Aside under NAICS code 488111. Interested parties must submit their responses by September 17, 2026, following the posting date of September 2, 2026. This contract focuses on the precise delivery of labeled and packaged components that meet rigorous military standards for the DLA Aviation ASC Commodities Division.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

U.S.-Flag Ocean Freight Transport

ASC COMMODITIES DIVISION

POSTED

DEADLINE

MIL-SPEC Packaging and Palletization Services

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Military-Grade Packaging and Labeling Services

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Military-Standard Packaging and Delivery ServicesThis subcontract for Military-Standard Packaging and Delivery Services supports prime contractors under DLA Land and Maritime supply contracts. The scope of work involves the specialized packaging of 150,000 mechanical shafts in strict accordance with MIL-STD-2073-1E and MIL-STD-129. Additionally, the provider must manage hazardous materials following the Hazard Communication Standard, utilizing MIL-SPEC packaging materials and marking equipment to ensure all components are ready for DLA acceptance. The project is managed by the Department of Defense under the Land Supply Chain agency, with performance taking place in New Cumberland, Pennsylvania. Classified under NAICS code 488111, the opportunity was posted on August 30, 2026, with a response deadline of September 10, 2026.

LAND SUPPLY CHAIN

POSTED

DEADLINE

LIPTM00003_FOCIS/ETVS_Follow-On_ATC MAC (C)The Naval Information Warfare Systems Command, specifically Niwc Atlantic, is forecasting a contract for the support of ETVS and FOCIS ATC systems. This follow-on effort is categorized under NAICS code 488111 and is intended to provide essential maintenance and operational support for these specific air traffic control systems. The performance of this contract will take place in Charleston, and the primary point of contact for the acquisition is Contracting Officer Kristen Rosenstrom. This forecast indicates a long-range planning effort to ensure the continued functionality and support of the identified systems.

POSTED

DEADLINE

Heavy-Duty Bus Towing and Transport ServicesThis subcontract opportunity is for the provision of heavy-duty bus towing and transport services to support prime contractors on Orange County Transportation Authority bus fleet projects. The selected provider will be responsible for hauling disabled heavy-duty CNG buses from their point of failure to designated repair facilities using specialized heavy-duty tow trucks, ensuring the safe transport of each vehicle. The contract falls under NAICS code 488111 and is managed by the California agency F&A-Contracts Administration and Materials Management. Interested parties must possess standard commercial towing licenses and the required insurance to be eligible. The solicitation was posted on August 27, 2026, with a response deadline of September 17, 2026.

F&A-Contracts Administration and Materials Management

POSTED

DEADLINE

Air Traffic Control Services, NSGB, Cuba

Solicitation # N6883627ATCGTMO

Naval Supply Systems Command Fleet Logistics Center Jacksonville is conducting market research through a Sources Sought Notice to identify capable vendors for Air Traffic Control and Flight Planning Services at U.S. Naval Station Guantanamo Bay, Cuba. The anticipated contract will be a firm-fixed price award with a performance start date of April 1, 2027. The estimated period of performance includes a 12-month base period and four one-year option periods, with an additional six-month extension option per FAR 52.217-8. The scope of work involves providing all managerial, supervisory, administrative, and technical support necessary for air traffic control operations. Key responsibilities include maintaining ATC Facility and Air Operations manuals, developing pilot information packages, processing civil aircraft landing permits, and implementing a facility training program. Contractors must adhere to NAVAIR 00-80T-114, FAA Orders 7220.1 and 3120.4, and Federal Aviation Regulations Parts 91 and 93. Personnel are required to maintain Secret security clearances and eligibility for various Navy IT systems. Interested sources must submit their company information, NAICS codes, socioeconomic status, and a detailed description of their capabilities to Rhonda Davis by 11:00 AM EDT on September 10, 2026. Responses are limited to five single-sided pages and should specify if services can be obtained via existing vehicles like GSA or SeaPort-NxG. Performance will be monitored via a Quality Assurance Surveillance Plan using methods such as 100 percent inspection, periodic surveillance, and customer feedback.

Navsup Flt Logistics Ctr Jacksonville

POSTED

DEADLINE

LIPTM00003_NASMOD System & Equip_Follow-On_ATC MAC (C)This forecast for support services is issued by the Naval Information Warfare Systems under the Niwc Atlantic agency. The contract, titled LIPTM00003_NASMOD System & Equip_Follow-On_ATC MAC (C), is categorized under NAICS code 488111 and is intended for performance in Charleston. Sean Johnson serves as both the primary and secondary point of contact for this procurement. The opportunity is currently listed as a forecast with a posted date of August 23, 2026.

POSTED

DEADLINE

MIL-STD-2073 Compliant Packaging and Shipping

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

More opportunities from Department Of Defense → Puget Sound Naval Shipyard IMF

Same awarding agency

Sheet, Rubber, Solid

Solicitation # N4523A-26-Q-4053

This pre-solicitation notice, identified by proposed solicitation number N4523A-26-Q-4053, is for the procurement of eight rolls of red solid silicone rubber sheeting. The required material must be 36 inches wide, 1/8 inch thick, and 25 feet long, adhering to A-A-59588 Table 1, GR 50, CL 3B and ASTM D 813 standards. This is a brand-name requirement for Thunder Technologies part number SIL50-125X36.0X300.0-SPEC. The contract is a total small business set-aside under NAICS code 326299 for All Other Rubber Product Manufacturing. Delivery is specified as FOB Destination to the Puget Sound Naval Shipyard in Bremerton, Washington, with an estimated delivery timeframe of six weeks. Payment will be processed via Wide Area Workflow, and the government will conduct a seven-day inspection. Quotes are not being requested at this time as this is a preliminary announcement.

All Other Rubber Product Manufacturing

POSTED

about 10 hours ago

DEADLINE

Marine Electrical Installation and UpgradesThis subcontract for Marine Electrical Installation and Upgrades supports the Puget Sound Naval Shipyard IMF under the Department of Defense. The project focuses on installing and upgrading electrical distribution and communication systems for the YRBM-50 Navy vessel, specifically involving switchboard upgrades, the replacement of 1MC General Announcing Systems, and the installation of phone and CCTV systems. All work must utilize marine-grade cabling and equipment while adhering to strict Navy electrical standards and marine electrical certifications. The opportunity is a total Small Business Set Aside under NAICS code 238210. It was posted on September 3, 2026, with a response deadline of October 5, 2026. The successful contractor will be responsible for delivering fully operational switchboard, 1MC, phone, and CCTV systems to the prime contractor.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Marine Coating and Preservation ServicesThis small business set-aside subcontract for the Puget Sound Naval Shipyard IMF involves providing marine coating and preservation services for the YRBM-50 Navy vessel. The scope of work includes surface preparation and coating application for the hull, freeboard, exterior decks, and superstructure, as well as the preservation of 24 ballast tanks and voids. Contractors will utilize abrasive blasting equipment and marine-grade non-skid coatings to deliver a fully preserved vessel. Qualified providers must hold SSPC/NACE coating certifications to perform these specialized tasks. The project falls under NAICS code 238160 and was posted on September 3, 2026, with a response deadline of October 5, 2026.

Roofing Contractors

POSTED

DEADLINE

Marine Fendering and Awning InstallationThis subcontract for the Puget Sound Naval Shipyard IMF involves the supply and installation of vessel protection and weather shielding for the YRBM-50 Navy vessel. The scope of work includes modifying hull fendering systems, removing and installing new zinc anodes, and replacing vessel awnings using heavy-duty marine canvas and marine grade materials. The project is designated as a total Small Business Set Aside under NAICS code 238990. Interested parties must respond by October 5, 2026, to provide the required installed fendering systems, anodes, and awnings in accordance with strict marine grade material specifications.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Marine HVAC and Plumbing ServicesThis subcontract for Marine HVAC and Plumbing Services supports prime contractors on Navy vessel projects, specifically focusing on the YRBM-50. The scope of work involves replacing and maintaining climate control and water heating systems, which includes the installation of marine A/C plants, backup systems, and industrial hot water heaters, as well as the disinfection of potable water systems. To ensure compliance and quality, the contractor must hold specific HVAC and potable water certifications. The project is managed by the Puget Sound Naval Shipyard IMF under the Department of Defense and is designated as a total Small Business Set Aside. Interested parties must respond by October 5, 2026, for this opportunity categorized under NAICS code 238220. The final deliverables include a fully installed A/C plant, a new hot water heater, and a certified potable water system.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Maintenance, Repair, and Preservation of YRBM-50

Solicitation # N4523A26R1002

The Puget Sound Naval Shipyard and Intermediate Maintenance Facility intends to award a stand-alone Firm-Fixed-Price contract for the maintenance, repair, and preservation of the YRBM-50. This 100 percent Small Business set-aside under NAICS 336611 requires the contractor to provide a facility located in the Puget Sound, Washington region, specifically between Olympia and Bellingham. The vessel availability is scheduled from March 31, 2027, through March 31, 2028. The contractor is responsible for transporting the vessel from the government facility in Bremerton to their repair site and returning it upon completion. The scope of work includes comprehensive hull and structural repairs, such as ultrasonic plating thickness measurements, zinc anode replacement, and blast and paint preservation of the hull, freeboard, exterior decks, and superstructure. Key modifications involve installing a hot water heater, replacing the awning and A/C plant, and upgrading the switchboard, 1MC, phone, and CCTV systems. Additionally, the contractor must maintain and preserve 24 ballast tanks and voids, disinfect the potable water system, and perform dock trials. Deliverables include redline drawings and extensive quality evidence reports. The contractor must also provide a dedicated government facility for the supervisor and adhere to strict safety and environmental regulations, including 29 CFR standards.

Ship Building and Repairing

POSTED

DEADLINE

Crane Component SupplyThis subcontract opportunity is for the supply of specialized mechanical and electrical components for bridge cranes supporting projects at the Puget Sound Naval Shipyard IMF under the Department of Defense. The scope of work includes providing high-capacity load blocks, precision gear reducers, speed reducers, brakes, bearings, couplings, wheels, sheaves, wire rope, and industrial motors. All materials must be delivered to the fabricator along with the necessary technical data sheets and safety data sheets. The contract is designated as a total Small Business Set Aside under NAICS code 335311, with the place of performance located in Silverdale. Interested parties must respond by September 9, 2026.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

DEADLINE

in about 18 hours

Crane Electrical Installation and IntegrationThis subcontract opportunity for the Department of Defense at the Puget Sound Naval Shipyard IMF involves the installation and integration of electrical power and control systems for bridge cranes. The scope of work includes installing VFD controllers, line reactors, and wiring for motors and encoders, as well as integrating wireless radio control systems. The contractor is responsible for testing runway conductors and main line contactors in accordance with NEC Article 430.7 and ISO 15408 to deliver a fully energized electrical control system. The project is located in Silverdale and is designated as a total small business set-aside under NAICS code 238210. Interested parties must submit their responses by September 9, 2026, at 4:00 PM.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

in about 18 hours

Crane Removal and Installation ServicesThis subcontract for Crane Removal and Installation Services involves the removal of a legacy 10-ton crane and the installation of a new 15-ton crane at Building 7201 for NAVSEA Puget Sound Naval Shipyard projects. The scope of work includes site preparation, rigging, hoisting, and positioning the crane on existing runways, as well as the installation of bridge rails and splice bars. The project concludes with field testing and the completion of the Acceptance Test Procedure to deliver a fully operational bridge crane. The opportunity is a total Small Business Set Aside under NAICS code 238290, managed by the Department of Defense for the Puget Sound Naval Shipyard IMF in Silverdale. The solicitation was posted on September 2, 2026, with a response deadline of September 9, 2026.

Other Building Equipment Contractors

POSTED

DEADLINE

in about 18 hours

Overhead Bridge Crane ManufacturingThis subcontract involves the design and fabrication of a 15-ton electric, top-running, double-girder bridge crane featuring wireless radio controls for prime contractors working on NAVSEA Puget Sound Naval Shipyard projects. The scope of work includes PE-sealed engineering design, the fabrication of bridge and hoist systems, and the application of industrial coatings. The contractor is responsible for performing no-load shop testing of limit switches and motor controls, and must deliver the completed crane along with comprehensive O&M manuals. The project is managed by the Department of Defense under the Puget Sound Naval Shipyard IMF, with performance taking place in Silverdale. This opportunity is designated as a total small business set-aside under NAICS code 333911. The solicitation was posted on September 2, 2026, with a response deadline of September 9, 2026.

Pump and Pumping Equipment Manufacturing

POSTED

DEADLINE

in about 18 hours

43' Diesel Scissor Lift Rental and Support ServicesThis subcontract for the Puget Sound Naval Shipyard IMF involves the supply and maintenance of one 43 foot diesel powered scissor lift for prime contractors. The selected provider is responsible for delivery, routine maintenance, and emergency repairs, ensuring the unit is crane liftable with a 1,500 lbs capacity and equipped with solid tires and maintenance free batteries. All equipment must be weighed, marked, and compliant with PSNS and IMF access requirements. The opportunity is designated as a total Small Business Set Aside under NAICS code 532490. Performance will take place in Bremerton, Washington, with a response deadline of September 24, 2026. The contractor is required to deliver an operational lift along with all necessary maintenance reports to the Department of Defense.

Other Commercial and Industrial Machinery and Equipment Rental and Leasing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS