Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Marine HVAC and Plumbing Services

Active

Federal

Response Deadline10/05/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Marine HVAC and Plumbing Services supports prime contractors on Navy vessel projects, specifically focusing on the YRBM-50. The scope of work involves replacing and maintaining climate control and water heating systems, which includes the installation of marine A/C plants, backup systems, and industrial hot water heaters, as well as the disinfection of potable water systems. To ensure compliance and quality, the contractor must hold specific HVAC and potable water certifications. The project is managed by the Puget Sound Naval Shipyard IMF under the Department of Defense and is designated as a total Small Business Set Aside. Interested parties must respond by October 5, 2026, for this opportunity categorized under NAICS code 238220. The final deliverables include a fully installed A/C plant, a new hot water heater, and a certified potable water system.

General Info

Subcontract for Navy vessel HVAC, plumbing, and water system services at Puget Sound Shipyard.

Agency

Department Of Defense → Puget Sound Naval Shipyard IMFView Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

WA

Set-Aside

SBA

Documents

This scope was carved out of N4523A26R1002.

The full solicitation package (13 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Maintenance, Repair, and Preservation of YRBM-50

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 3

subcontract

Response DeadlineOct 5

Submission deadline

Response Deadline

10/05/2026, 07:00:00 PM UTCin 27 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Puget Sound Naval Shipyard IMF

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Puget Sound Naval Shipyard IMF

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Replaces and maintains climate control and water heating systems for prime contractors on Navy vessel projects, here the YRBM-50. Replaces A/C plants, installs backup systems, installs new hot water heaters, and disinfects potable water systems. Uses marine A/C units and industrial hot water heaters. Requires HVAC and potable water certifications. Delivers installed A/C plant, hot water heater, and certified potable water system.

Similar Contracts

Same NAICS industry code

Department Of Agriculture & Industries - General Services - Annual Agreement - HVAC Maintenance Repairs

Solicitation # SRC0000036075

The Alabama Department of Agriculture and Industries is seeking an annual agreement for as-needed HVAC maintenance and repairs at the Richard Beard Building in Montgomery, Alabama. The contract covers the service period from October 1, 2026, through September 30, 2027, specifically for an Aaon Outdoor Air Unit, model RN-025-3-0. Bidders must provide pricing for service calls, regular hourly rates, overtime and after-hour rates, parts, and shipping costs. A critical requirement for this solicitation is that the supplier or technician must be Aaon certified, and the department reserves the right to request supporting documentation of this certification. Interested parties must submit their responses by September 14, 2026. The primary point of contact for the agency is Gary Lovelady, with administrative support available through Jessica Richards and the Alabama Buys Helpdesk.

General Services

POSTED

about 5 hours ago

DEADLINE

Kitchen Hood Suppression System Specialist

Bristol Alliance of Companies

POSTED

about 6 hours ago

DEADLINE

ICE 8A - Ft Benning Improvements

Solicitation # 871724

The ICE 8A - Ft Benning Improvements project, solicitation number 871724, involves a series of facility upgrades at Fort Benning in Columbus, Georgia. The scope of work includes the installation of two aluminum awnings, turf replacement at Fiske Range, the demolition and site restoration of Building 2294, and gutter and drainage improvements at Building 234. Additionally, the contract covers commercial HVAC services and unit replacements, along with general facility improvements for Building 301 and the DAGr Team facility. This solicitation is managed by the Bristol Alliance of Companies, with Mike Oakes serving as the primary point of contact. An optional pre-bid meeting was scheduled for August 28, 2026, and the final deadline for responses is September 18, 2026.

Bristol Alliance of Companies

POSTED

about 6 hours ago

DEADLINE

PIDC Project 3 - Dorm RTU Replacement and SCADA

Solicitation # 872287

The PIDC Project 3 Dorm RTU Replacement and SCADA solicitation, issued by the Bristol Alliance of Companies on behalf of U.S. Immigration and Customs Enforcement, seeks a contractor to replace and upgrade obsolete and corroded rooftop HVAC units at the Alpha, Bravo, Charlie, and Delta dorms at the Port Isabel Detention Center in Los Fresnos, Texas. The objective is to install high quality, durable, and coastal weather resistant systems that incorporate the latest technology and exceed standard commercial and industrial HVAC specifications. The project also includes SCADA integration and is estimated to have a magnitude between 1.2 million and 1.5 million dollars. This firm fixed price construction task order is being pursued under the 8a MACC IDIQ with a period of performance of 365 days following the award. Proposals must be submitted by September 24, 2026, and must include a detailed cost breakdown by CSI division, including subcontractor quotes. Evaluation factors for the selection process include the technical approach, safety and quality control measures, and price. Interested parties were provided an optional pre bid meeting on September 3, 2026, and a deadline for clarification questions on September 10, 2026.

Bristol Alliance of Companies

POSTED

about 6 hours ago

DEADLINE

HVAC & Fire Protection System, Pumpwell 4, 704, PSNS

Solicitation # 865814

This project involves the design and installation of HVAC and fire protection systems for Pumpwell 4, a below-ground facility at the Puget Sound Naval Shipyard in Bremerton, Washington. The scope includes the demolition of the existing HVAC system and the installation of a new system designed to maintain a maximum 55 degree dewpoint and provide critical cooling during drydock dewatering. Key HVAC performance requirements include a minimum of 30,000 cfm of outdoor air, 15,000 cfm of forced airflow to pump motors, and 15,000 cfm for electrical equipment, supported by at least 12 circulating fans with a combined airflow of 50,000 cfm. The fire protection scope requires the installation of a comprehensive fire alarm, sprinkler system, and smoke exhaust system tailored for an underground structure, adhering to UFC and NFPA standards. The contract is issued by NAVFAC Northwest ROICC Bremerton under an 8(a) MACC as a 100 percent 8(a) set-aside with a firm-fixed-price structure and a project magnitude between 1 million and 5 million dollars. The work includes significant electrical infrastructure updates, such as a new 225A panelboard and feeders from Switchboard B, as well as the integration of DDC controls and seismic bracing. The period of performance is 480 days from the date of the task order award. Project execution requires adherence to strict site logistics, including crane loading restrictions at Pier D and the management of hazardous materials as identified in site reports.

Bristol Alliance of Companies

POSTED

about 6 hours ago

DEADLINE

CBP5933 Bldg. 225 HVAC Replacement

Solicitation # CBP5933

Management & Training Corporation (MTC) is seeking bids for a fixed-price, single lump sum subcontract to replace six split-system heat pump HVAC systems at the San Diego Job Corps Center in Imperial Beach, California. The scope of work includes the installation of three 2-ton and three 1.5-ton Payne heat pump systems with matching indoor air handlers, as well as the removal and disposal of old equipment. The contractor must provide all labor, materials, and supervision, ensuring compliance with California Mechanical and Electrical Codes, OSHA standards, and U.S. Department of Energy efficiency requirements. The project must be completed within 30 consecutive business days following a written Notice to Proceed. Bids are due by September 11, 2026, and will be evaluated based on overall best value, considering price, quality, and delivery schedule. The estimated contract value ranges from $25,000 to $100,000. For bids equal to or greater than $25,000, a bid bond of 20% of the base bid is required, and the awarded contractor must provide performance and payment bonds from an A-rated surety. Submission requirements include the MTC Bid for Lump Sum Contract form, a detailed cost breakout on company letterhead, and a 12-digit Unique Entity ID. The contract is subject to the Davis-Bacon Act, requiring adherence to prevailing wage rates and specific federal labor standards. Final payment is contingent upon a retainage analysis and the submission of closeout documents, including operation and maintenance manuals.

San Diego Job Corps Center

POSTED

about 6 hours ago

DEADLINE

RFQ7593 Smoke Detector Installation

Solicitation # RFQ7593

Management & Training Corporation (MTC) is soliciting bids for a fee-for-service subcontract to provide fire system services at the Sierra Nevada Job Corps Center in Reno, Nevada. The scope of work involves the replacement and installation of 43 smoke detectors across several dormitory rooms, specifically rooms 11, 15, 18, 19, 20, and 21. All installations must be tested for communication with the fire panel and performed in accordance with NFPA standards and local Authority Having Jurisdiction requirements. Work is to be conducted during standard business hours, Monday through Friday, 8:00 am to 5:00 pm, with no overtime labor included. Bids must be submitted via email to Tom Williams by 3:00 PM PST on September 18, 2026. To be considered, offerors must provide a lump sum bid sheet, proof of insurance, and a completed supplier packet including a W-9 and self-certification form. This opportunity is open to various small business categories, including SDB, WOSB, HUBZone, VOSB, and SDVOSB, and requires a Unique Entity ID. The contract mandates compliance with Service Contract Labor Standards under Wage Determination 2015-5595 (Revision 28) and incorporates several FAR clauses, including those regarding the utilization of small business concerns and combating trafficking in persons. MTC will serve as the sole judge in determining the best value award.

Sierra Nevada Job Corps Center

POSTED

about 6 hours ago

DEADLINE

2026-Clearfield-Bldg E8 Welding HVAC

Solicitation # 2026- Clearfield- Welding Bldg. E8 HVAC Replacement

Management & Training Corporation (MTC) is seeking fixed-price lump sum bids for a subcontracting opportunity to replace a 20hp motor connected to the rooftop HVAC system at the Clearfield Job Corps Center in Clearfield, Utah. The scope of work includes providing all labor, materials, equipment, and permits necessary to remove the old motor, install a new commercial-grade 20hp motor, and ensure the system is fully operational through startup, testing, and commissioning. Bids must be submitted via email to designated contacts by September 19, 2026, at 3:00 PM MST. Award will be based on overall best value, and interested bidders must complete a physical site visit and sign the attendance roster to be eligible. Required submission documents include a bid sheet, a detailed cost breakout on company letterhead, a bid bond guarantee, and a completed supplier self-certification packet including a W-9 and a 12-digit Unique Entity ID. The project is subject to Davis-Bacon prevailing wage determinations for Davis County, Utah, and requires compliance with OSHA standards and various FAR clauses, including SF 1413 reporting. Upon receipt of an Intent to Award, the selected contractor must provide original performance and payment bonds from a surety with at least an A- rating within five business days. Final acceptance will be conducted by MTC following the delivery of startup and testing documentation.

Management & Training Corporation

POSTED

about 6 hours ago

DEADLINE

Joliet JCC Sewer Vent Repairs

Solicitation # Joliet JCC Sewer Vent Pipe Repair

Management & Training Corporation (MTC) is seeking a subcontractor for sewer vent pipe repairs at the Joliet Job Corps Center located in Joliet, Illinois. The scope of work involves removing and disposing of deteriorated vent piping within case walls, installing new code-compliant vent piping, and restoring access openings to a paint-ready condition. The contractor must ensure all connections are watertight, verify the elimination of sewer gas leakage through system testing, and provide manufacturer and installer warranties. This is a fee-for-service opportunity requiring a lump sum bid, with the award based on best value as determined by MTC. Interested bidders must submit their proposals via email by 3:00 PM CT on September 11, 2026. Required submission documents include a completed bid sheet, three references for similar projects, proof of insurance, and a supplier packet containing a W-9, self-certification form, and acceptance of terms and conditions. The opportunity is open to various small business set-asides under NAICS code 238220. Compliance requirements include adherence to Service Contract Labor Standards under Wage Determination 2015-5019 Rev 31, FAR clauses regarding small business utilization and trafficking in persons, and Department of Labor guidelines for privacy and records management. Invoicing should be submitted weekly or bi-weekly and must include the purchase order number and a detailed breakdown of services.

MTC Joliet Job Corps

POSTED

about 6 hours ago

DEADLINE

RFQ#3191 Laundry Tray Installations

Solicitation # RFQ#3191

Management & Training Corporation (MTC) is seeking a subcontractor under RFQ 3191 to provide plumbing services for the Charleston Job Corps Center in West Virginia. The project involves the removal of existing units and the installation of new laundry trays and faucet sets in the Education and CTT restroom areas. The selected contractor must provide all labor, materials, and supervision, ensuring that all installations are tested for proper water flow, drainage, and leak prevention. All work must comply with local plumbing codes and Job Corps facility standards, and the contractor is required to provide manufacturer and installer warranties on company stationery. This is a fee-for-service opportunity awarded on a lump sum basis, with the best value determination made solely by MTC. The solicitation is open to various small business set-asides, including SDB, WOSB, HUBZone, and SDVOSB. Bids must be submitted via email to Wendy Lawrence by 3:00 PM EST on September 11, 2026, and must include a bid sheet, completed supplier packet (W-9 and self-certification), proof of insurance, and three relevant references. The contract is subject to Service Contract Labor Standards wage determination 2015-4347 and requires adherence to FAR regulations regarding debarment disclosure for subcontracts exceeding 30,000 dollars, as well as strict Department of Labor privacy and records management requirements.

Management & Training Corporation

POSTED

about 6 hours ago

DEADLINE

CBP7664 Wellness HVAC Compressor Replacement

Solicitation # cbp7664-wellness-hvac-compressor-replacement

Management and Training Corporation is seeking bids for a subcontracting opportunity to provide HVAC services, specifically the replacement of wellness HVAC compressors, at the Sierra Nevada Job Corps Center located in Reno, Nevada. This solicitation, identified as cbp7664-wellness-hvac-compressor-replacement, is open to various small business categories, including Small Disadvantaged, Women-Owned, HUBZone, and Veteran-Owned small businesses. Interested parties must submit their responses by September 23, 2026. The project falls under NAICS code 238220 and requires strict adherence to the prevailing wage rates and fringe benefits outlined in Wage Determination NV20250040 for building construction in Washoe County, Nevada. Applicants are required to complete a supplier self-certification and set-up form, including the submission of an IRS W-9 for taxpayer identification and certification of their business classification. Primary inquiries and coordination for this opportunity are handled by Tom Williams.

Sierra Nevada Job Corps Center

POSTED

about 6 hours ago

DEADLINE

Replace Shower Diverters in two (2) Dorms

Solicitation # replace-shower-diverters-two-2-dorms

This project involves the removal and replacement of shower diverters in eight bathrooms across two dormitory buildings, with four bathrooms located in each building. The scope of work includes repairing and replacing any piping in poor condition leading into the diverters. The existing Powers brand systems must be replaced with Delta or a comparable style that utilizes readily available parts. The site visit is scheduled for September 1, 2026, at 10:30 AM, and proposals must be submitted to Tammy Swallows at Atterbury Job Corps by September 14, 2026, at 3:00 PM. This solicitation is set aside for various small business categories, including SDB, WOSB, HUBZone, and SDVOSB, under NAICS code 238220 for performance in Indiana.

Adams & Associates

POSTED

about 6 hours ago

DEADLINE

More opportunities from Department Of Defense → Puget Sound Naval Shipyard IMF

Same awarding agency

Sheet, Rubber, Solid

Solicitation # N4523A-26-Q-4053

This pre-solicitation notice, identified by proposed solicitation number N4523A-26-Q-4053, is for the procurement of eight rolls of red solid silicone rubber sheeting. The required material must be 36 inches wide, 1/8 inch thick, and 25 feet long, adhering to A-A-59588 Table 1, GR 50, CL 3B and ASTM D 813 standards. This is a brand-name requirement for Thunder Technologies part number SIL50-125X36.0X300.0-SPEC. The contract is a total small business set-aside under NAICS code 326299 for All Other Rubber Product Manufacturing. Delivery is specified as FOB Destination to the Puget Sound Naval Shipyard in Bremerton, Washington, with an estimated delivery timeframe of six weeks. Payment will be processed via Wide Area Workflow, and the government will conduct a seven-day inspection. Quotes are not being requested at this time as this is a preliminary announcement.

All Other Rubber Product Manufacturing

POSTED

about 10 hours ago

DEADLINE

Marine Electrical Installation and UpgradesThis subcontract for Marine Electrical Installation and Upgrades supports the Puget Sound Naval Shipyard IMF under the Department of Defense. The project focuses on installing and upgrading electrical distribution and communication systems for the YRBM-50 Navy vessel, specifically involving switchboard upgrades, the replacement of 1MC General Announcing Systems, and the installation of phone and CCTV systems. All work must utilize marine-grade cabling and equipment while adhering to strict Navy electrical standards and marine electrical certifications. The opportunity is a total Small Business Set Aside under NAICS code 238210. It was posted on September 3, 2026, with a response deadline of October 5, 2026. The successful contractor will be responsible for delivering fully operational switchboard, 1MC, phone, and CCTV systems to the prime contractor.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Marine Coating and Preservation ServicesThis small business set-aside subcontract for the Puget Sound Naval Shipyard IMF involves providing marine coating and preservation services for the YRBM-50 Navy vessel. The scope of work includes surface preparation and coating application for the hull, freeboard, exterior decks, and superstructure, as well as the preservation of 24 ballast tanks and voids. Contractors will utilize abrasive blasting equipment and marine-grade non-skid coatings to deliver a fully preserved vessel. Qualified providers must hold SSPC/NACE coating certifications to perform these specialized tasks. The project falls under NAICS code 238160 and was posted on September 3, 2026, with a response deadline of October 5, 2026.

Roofing Contractors

POSTED

DEADLINE

Hull and Structural Repair ServicesThis subcontract for Hull and Structural Repair Services supports the Puget Sound Naval Shipyard IMF under the Department of Defense for work on the YRBM-50 Navy vessel. The scope of work involves performing structural repairs to the hull, freeboard, and exterior decks, including the repair of watertight hatches, doors, access covers, and hawse hole bull's eyes. Technical requirements include conducting ultrasonic plating thickness measurements and performing necessary repairs to areas falling below minimum thickness using steel welding equipment. The project requires personnel to hold Hot Work and Welding certifications to deliver certified structural repairs and redline drawings. This opportunity is designated as a Total Small Business Set Aside under NAICS code 488111. The solicitation was posted on September 3, 2026, with a response deadline of October 5, 2026.

Air Traffic Control

POSTED

DEADLINE

Marine Propulsion and Steering RepairThis subcontract for Marine Propulsion and Steering Repair is issued by the Puget Sound Naval Shipyard IMF under the Department of Defense. The project involves performing critical maintenance and repairs on movement and steering systems for prime contractors working on Navy vessel projects, specifically the YRBM-50. The scope of work includes executing main propulsion repairs, steering system repairs, and general machinery system maintenance in accordance with marine mechanical engineering standards to deliver fully functional systems. The opportunity is designated as a total Small Business Set Aside under NAICS code 488111. It was posted on September 3, 2026, with a response deadline of October 5, 2026. The contract requires the use of specialized propulsion machinery tools and steering gear components to ensure all vessel systems meet operational requirements.

Air Traffic Control

POSTED

DEADLINE

Marine Fendering and Awning InstallationThis subcontract for the Puget Sound Naval Shipyard IMF involves the supply and installation of vessel protection and weather shielding for the YRBM-50 Navy vessel. The scope of work includes modifying hull fendering systems, removing and installing new zinc anodes, and replacing vessel awnings using heavy-duty marine canvas and marine grade materials. The project is designated as a total Small Business Set Aside under NAICS code 238990. Interested parties must respond by October 5, 2026, to provide the required installed fendering systems, anodes, and awnings in accordance with strict marine grade material specifications.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Maintenance, Repair, and Preservation of YRBM-50

Solicitation # N4523A26R1002

The Puget Sound Naval Shipyard and Intermediate Maintenance Facility intends to award a stand-alone Firm-Fixed-Price contract for the maintenance, repair, and preservation of the YRBM-50. This 100 percent Small Business set-aside under NAICS 336611 requires the contractor to provide a facility located in the Puget Sound, Washington region, specifically between Olympia and Bellingham. The vessel availability is scheduled from March 31, 2027, through March 31, 2028. The contractor is responsible for transporting the vessel from the government facility in Bremerton to their repair site and returning it upon completion. The scope of work includes comprehensive hull and structural repairs, such as ultrasonic plating thickness measurements, zinc anode replacement, and blast and paint preservation of the hull, freeboard, exterior decks, and superstructure. Key modifications involve installing a hot water heater, replacing the awning and A/C plant, and upgrading the switchboard, 1MC, phone, and CCTV systems. Additionally, the contractor must maintain and preserve 24 ballast tanks and voids, disinfect the potable water system, and perform dock trials. Deliverables include redline drawings and extensive quality evidence reports. The contractor must also provide a dedicated government facility for the supervisor and adhere to strict safety and environmental regulations, including 29 CFR standards.

Ship Building and Repairing

POSTED

DEADLINE

Crane Component SupplyThis subcontract opportunity is for the supply of specialized mechanical and electrical components for bridge cranes supporting projects at the Puget Sound Naval Shipyard IMF under the Department of Defense. The scope of work includes providing high-capacity load blocks, precision gear reducers, speed reducers, brakes, bearings, couplings, wheels, sheaves, wire rope, and industrial motors. All materials must be delivered to the fabricator along with the necessary technical data sheets and safety data sheets. The contract is designated as a total Small Business Set Aside under NAICS code 335311, with the place of performance located in Silverdale. Interested parties must respond by September 9, 2026.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

DEADLINE

in about 18 hours

Crane Electrical Installation and IntegrationThis subcontract opportunity for the Department of Defense at the Puget Sound Naval Shipyard IMF involves the installation and integration of electrical power and control systems for bridge cranes. The scope of work includes installing VFD controllers, line reactors, and wiring for motors and encoders, as well as integrating wireless radio control systems. The contractor is responsible for testing runway conductors and main line contactors in accordance with NEC Article 430.7 and ISO 15408 to deliver a fully energized electrical control system. The project is located in Silverdale and is designated as a total small business set-aside under NAICS code 238210. Interested parties must submit their responses by September 9, 2026, at 4:00 PM.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

in about 18 hours

Crane Removal and Installation ServicesThis subcontract for Crane Removal and Installation Services involves the removal of a legacy 10-ton crane and the installation of a new 15-ton crane at Building 7201 for NAVSEA Puget Sound Naval Shipyard projects. The scope of work includes site preparation, rigging, hoisting, and positioning the crane on existing runways, as well as the installation of bridge rails and splice bars. The project concludes with field testing and the completion of the Acceptance Test Procedure to deliver a fully operational bridge crane. The opportunity is a total Small Business Set Aside under NAICS code 238290, managed by the Department of Defense for the Puget Sound Naval Shipyard IMF in Silverdale. The solicitation was posted on September 2, 2026, with a response deadline of September 9, 2026.

Other Building Equipment Contractors

POSTED

DEADLINE

in about 18 hours

Overhead Bridge Crane ManufacturingThis subcontract involves the design and fabrication of a 15-ton electric, top-running, double-girder bridge crane featuring wireless radio controls for prime contractors working on NAVSEA Puget Sound Naval Shipyard projects. The scope of work includes PE-sealed engineering design, the fabrication of bridge and hoist systems, and the application of industrial coatings. The contractor is responsible for performing no-load shop testing of limit switches and motor controls, and must deliver the completed crane along with comprehensive O&M manuals. The project is managed by the Department of Defense under the Puget Sound Naval Shipyard IMF, with performance taking place in Silverdale. This opportunity is designated as a total small business set-aside under NAICS code 333911. The solicitation was posted on September 2, 2026, with a response deadline of September 9, 2026.

Pump and Pumping Equipment Manufacturing

POSTED

DEADLINE

in about 18 hours

43' Diesel Scissor Lift Rental and Support ServicesThis subcontract for the Puget Sound Naval Shipyard IMF involves the supply and maintenance of one 43 foot diesel powered scissor lift for prime contractors. The selected provider is responsible for delivery, routine maintenance, and emergency repairs, ensuring the unit is crane liftable with a 1,500 lbs capacity and equipped with solid tires and maintenance free batteries. All equipment must be weighed, marked, and compliant with PSNS and IMF access requirements. The opportunity is designated as a total Small Business Set Aside under NAICS code 532490. Performance will take place in Bremerton, Washington, with a response deadline of September 24, 2026. The contractor is required to deliver an operational lift along with all necessary maintenance reports to the Department of Defense.

Other Commercial and Industrial Machinery and Equipment Rental and Leasing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS