Top

HVAC Equipment Supply – Mini-Split Units

Active

Federal

Response Deadline08/20/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → W071 Endist PortlandView Agency

NAICS

333415 - Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment ManufacturingView NAICS

Place of Performance

Trail, OR, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 5

subcontract

Response DeadlineAug 20

Submission deadline

Response Deadline

08/20/2026, 09:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyDepartment Of Defense → W071 Endist Portland

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → W071 Endist Portland

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Supply of nine ENERGY STAR® and EPA-certified mini-split units with no smart features, meeting specified BTU, voltage, and circuit requirements.

Similar Contracts

Same NAICS industry code

NAICS: 333415

New

SLED

Supply of 27 1/5" Single-Door Reach-In Freezers

California Department of Rehabilitation

POSTED

DEADLINE

Supply of 54" Two-Section Reach-In Refrigerators

California Department of Rehabilitation

POSTED

DEADLINE

water filters for Anniston

Solicitation # SP3300-26-Q-0234

The contract is for the provision of water filters for Anniston, Alabama, under solicitation number SP3300-26-Q-0234, issued by the Department of Defense through DLA Distribution. It is a combined solicitation with a Small Business Set Aside designation, meaning only small businesses are eligible to bid, and the North American Industry Classification System code is 333415, which pertains to water and water supply equipment manufacturing. The opportunity was posted on August 6, 2026, with a response deadline of August 12, 2026, at 5:00 PM Eastern Time. The performance location is in Anniston, AL, with the contract office located in New Cumberland, Pennsylvania. Primary point of contact for inquiries is Eric Hopkins, reachable via email at eric.hopkins@dla.mil or by phone at 717-770-3015. All proposals must be submitted through the SAM.gov portal using the provided link.

POSTED

DEADLINE

Solicitation # SPE8E826T5100

The contract seeks the procurement of two cooler units, air type, identified by NSN 4130012251590, to be delivered to W1A8 DLA DISTRIBUTION within 139 days after award. The approved source for this item is 38450 FCU-H3-3.5KW-LVP, and only electronic quotes will be accepted; hard copies are not available. The solicitation, issued under number SPE8E826T5100, is a combined RFQ with no set-aside classification, open to all responsible sources that submit timely responses. Technical specifications, plans, or drawings are not provided, and bidders must rely on the information in the solicitation document accessible exclusively through the online portal. The solicitation was posted on August 6, 2026, with a response deadline of August 17, 2026, and is managed by DLA Troop Support under the NAICS code 333415. All inquiries must be directed via email to the designated point of contact listed in the solicitation, and further details can be found on the DIBBS website by entering the solicitation number in the global search.

POSTED

DEADLINE

41--COOLING COIL,CONTINUOU

Solicitation # SPE8E826T5108

The U.S. Department of Defense, through DLA Troop Support, is seeking quotes for nine units of a continuous cooling coil with NSN 4130002730814 and one additional unit, both to be delivered to DLA Distribution at location W1A8. The nine-unit requirement has a delivery deadline of 299 days after order award, while the single unit must be delivered within 90 days. All responsible vendors are invited to submit electronic quotes by the response deadline of August 17, 2026, with no set-aside restrictions applied. The procurement is classified under NAICS code 333415, relating to heating equipment manufacturing, and is being managed from the agency’s office in Philadelphia, Pennsylvania. Questions must be directed to the designated point of contact via email, with additional solicitation details available through the official DIBBS portal using the solicitation number SPE8E826T5108.

POSTED

DEADLINE

41--CONDENSING UNIT,REFRIG

Solicitation # SPE8E826T5104

The contract is for the procurement of nine condensing units, refrigerant type, with NSN 4130014428484, and an additional twelve units under a separate line item, both to be delivered to W1A8 DLA DISTRIBUTION within 54 days of award. The only approved source for this item is 66682 RUT510-3, and all quotes must be submitted electronically through the official solicitation portal; hard copies are not available and no specifications, plans, or drawings are provided. The solicitation, identified as SPE8E826T5104, was posted on August 6, 2026, with a response deadline of August 17, 2026, and is classified as a combined solicitation set aside exclusively for Service-Disabled Veteran-Owned Small Businesses under FAR 19.14. The procurement is managed by the Department of Defense through DLA Troop Support, with the contracting office located in Philadelphia, Pennsylvania, and all inquiries must be directed via email to the designated point of contact listed in the solicitation document, accessible through the provided SAM.gov link.

POSTED

DEADLINE

Solicitation # SPE8E826T5107

The contract solicitation aims to procure five air cooler units with NSN 4130014091423, to be delivered to DLA Distribution Puget Sound within 303 days of award. The only approved source for this item is listed as 38450 DDG SZ 23 TY III FCA, and quotes must be submitted electronically through the online solicitation portal; hard copies are not available. No specifications, plans, or drawings are provided to offer additional detail about the unit’s requirements. The solicitation, numbered SPE8E826T5107, was posted on August 6, 2026, with a deadline for responses set for August 17, 2026, and is open to all responsible sources who can meet the delivery terms. It is classified as a combined solicitation under NAICS code 333415 and administered by DLA Troop Support out of Philadelphia, Pennsylvania. Questions regarding the solicitation must be directed via email to the designated point of contact, with further details accessible through the SAM.gov workspace link or the DIBBS portal by entering the solicitation number.

POSTED

DEADLINE

41--DUCT ADAPTER KIT,AIR C

Solicitation # SPE8E826T5101

The U.S. Department of Defense, through DLA Troop Support, is soliciting quotes for 26 units of NSN 4130014347665, a DUCT ADAPTER KIT,AIR C, to be delivered to W1A8 DLA DIST SAN JOAQUIN within 35 days of award. This procurement is conducted via a Request for Quote (RFQ) under solicitation number SPE8E826T5101, with all responses required to be submitted electronically and no hard copies available. The solicitation is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses (SDVOSB), as defined under FAR 19.14, and is categorized under NAICS code 333415 for Air Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing. The quote submission deadline is August 17, 2026, and interested parties must access the full solicitation details through the provided online portal; digitized technical drawings and military specifications are available for electronic retrieval or order. All responsible sources meeting the SDVOSB criteria are eligible to respond, and inquiries should be directed to the designated point of contact via email. The contract is managed out of Philadelphia, Pennsylvania, with no designated place of performance specified beyond the delivery location.

POSTED

DEADLINE

Farrar Cyclone Forced Air Ultra-Low Freezer for the Department of Transfusion Medicine

Solicitation # 26-006077

The National Institutes of Health, through its Clinical Center’s Department of Transfusion Medicine, intends to award a sole-source firm-fixed-price purchase order to Helmer for a Farrar Cyclone Forced Air Ultra-Low Freezer, Model FCF133, with a capacity of 33 cubic feet. This equipment is essential for maintaining regulated ultralow temperature storage of critical blood products, reagents, and laboratory supplies used in patient care and clinical research at the NIH Clinical Center in Bethesda, Maryland. The procurement includes delivery, installation, and a manufacturer service plan to ensure continuous operational reliability and compliance with stringent regulatory standards for biomedical storage. The acquisition is classified under PSC 4110 and NAICS code 333415, reflecting its alignment with commercial and industrial refrigeration equipment manufacturing. The Government has determined Helmer to be the sole responsible source capable of meeting the technical, regulatory, and performance requirements due to its established expertise in transfusion medicine storage systems. This sole-source action is authorized under FAR 13.106-1(b)(1)(i), allowing noncompetitive procurement when only one vendor is reasonably available. While the contract is not open to competitive bids, responsible vendors may submit capability statements demonstrating equivalent product offerings that satisfy all specified requirements. Submissions must reference POTS No. 26-006077 and be received electronically by 6:00 a.m. Eastern Time on August 15, 2026. All inquiries should be directed to Shasheshe Goolsby, Team Leader in the Hospital and Laboratory Support Division, through the provided email or phone contact.

National Institutes Of Health Olao

POSTED

DEADLINE

Closed-Cycle Cryostat or Dilution Refrigerator Supply

Florida State University

POSTED

DEADLINE

Supply of Infrared Heating Units & Components

POSTED

DEADLINE

Cartridge Manufacturing and Supply

POSTED

DEADLINE

More opportunities from Department Of Defense → W071 Endist Portland

Same awarding agency

NAICS: 237990

New

Federal

JDA Tainter Valves (TV3 & TV4) Repair

Solicitation # W9127N26BA030

The U.S. Army Corps of Engineers is seeking qualified contractors to repair and rehabilitate two Tainter Valves, TV3 and TV4, at the John Day Lock and Dam in Oregon. This firm-fixed price contract involves comprehensive structural and weld repairs to address widespread cracking, corrosion, and cavitation damage identified on the valves’ skin plates, girders, and other components, as detailed in government-provided engineering drawings. All welds must meet AWS D1.1 standards, and contractors must ensure their fabrication facility holds AISC Quality Certification with a fracture critical endorsement and five years of documented experience on similar projects. The work includes replacing top, bottom, and side seals along with all associated seal plates and hardware, installing new armor plates over cavitated areas, and replacing bushings with precise alignment validated through as-built surveys performed at removal, during shop repair, and before reinstallation. The valves must be removed from the navigation lock fill culverts, transported to a certified fabrication facility for repair, and returned for reinstallation under strict dimensional controls. The contract has an estimated value between $1 million and $5 million and a performance period of 321 days following the Notice to Proceed. Full and open competition is anticipated under NAICS code 237990, with no small business set-aside applied. Offerors must be registered in SAM.gov prior to bid submission and must comply with stringent technical and certification requirements. A site visit will be conducted within two weeks of the solicitation release, expected around mid-August 2026, with proposals due by August 19, 2026. The government intends to award without discussions but reserves the right to conduct them if necessary. Responses to this presolicitation notice are not accepted, and no reimbursement will be provided for pre-bid costs. Questions should be directed to the designated points of contact via email only.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

Notice of Intent to Sole Source - MU SF6 Breaker Operating Mechanism

Solicitation # W9127N26QA126

The U.S. Army Corps of Engineers, Portland District, intends to award a sole-source, Firm-Fixed-Price commercial supply contract to Nexus Power Solution LLC for the factory rebuild of one SF6 breaker operating mechanism for the Main Unit Generator Circuit Breaker at Bonneville Lock and Dam, with an option to rebuild a second unit if funds permit. This action is justified due to the proprietary nature of the HMB Breaker Operating Mechanism, originally manufactured by Hitachi Energy USA Inc., which requires specialized factory tooling, engineering specifications, and certified testing equipment exclusively available at the OEM’s facility. Nexus Power Solution LLC is the sole authorized regional representative with the exclusive authority to facilitate such factory overhauls, making no other vendor realistically capable of meeting the government’s technical requirements. No competitive solicitation will be posted to SAM.gov, and responses are limited to written capability statements submitted by 5:00 PM PDT on August 18, 2026, demonstrating the ability to perform factory-certified remanufacturing using authorized OEM parts. Interested parties must respond via email with a company profile including legal business name, point of contact, CAGE code, and Unique Entity Identifier, along with their socioeconomic status under NAICS 334513 and a detailed statement of capability proving technical authorization to rebuild the Hitachi HMB-4 mechanism. The contract is intended for a small business set-aside under this NAICS code, though the initial notice identifies NAICS 811310 in the data feed, creating a discrepancy that does not alter the stated intent to restrict sourcing to the sole authorized provider. Responses must be submitted electronically to the designated contracting points of contact, and oral communications are not accepted. The government retains full discretion to proceed without competition if no viable alternatives are presented by the deadline, and no costs incurred by respondents will be reimbursed. The place of performance is specified as Greensburg, Pennsylvania, while the contracting office is located in Portland, Oregon.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Coos Bay Fuel Upgrades

Solicitation # W9127N26QA118

The U.S. Army Corps of Engineers, Portland District, is soliciting quotes under solicitation number W9127N26QA118 for the removal and replacement of existing bilge oil piping and a 550-gallon used oil tank at the Coos Bay Pier, 1460 N Bayshore Drive, Coos Bay, Oregon. The work, to be performed between October 1, 2026, and March 30, 2027, includes replacing approximately 275 feet of bilge oil piping and 300 feet of used oil piping along with associated valves, couplings, elbows, and supports, upgrading to a new 550-gallon double-walled above-ground storage tank certified to UL 142 with marine-grade coating, leak detection, emergency shutdown valves, and seismic anchoring, and elevating the new tank one foot above the existing concrete pad while reusing the foundation. All materials must meet ASTM A312, ASME B36.19M, and ASME B16.11 standards, and piping must be permanently marked in compliance with MIL-STD-161H and ASME A13.1 for color coding and identification. Installation must be followed by hydrostatic and pneumatic testing with zero pressure drop and zero visible leakage, certified by the contractor’s QC manager and an independent inspector, and all required documentation including daily reports and operations manuals must be submitted for government acceptance. The contract is a firm fixed price, set aside entirely for small businesses under NAICS code 237120, and includes strict subcontracting limits requiring the prime contractor to perform at least 50% of the labor and material. All offerors must be registered in SAM.gov with a valid UEI and comply with FAR and DFARS clauses covering small business eligibility, prohibitions on inverted domestic corporations, safeguarding covered defense information, whistleblower rights, and restrictions on acquiring covered telecommunications equipment. Personnel must pass NCIC-III and TSDB background checks, complete Anti-Terrorism Level I and Suspicious Activity Reporting training via JKO, and submit pre-screened employee lists using E-Verify prior to site access, with non-U.S. citizens requiring 30-day advance notification and HQUSACE authorization. Invoices are to be submitted as PDFs via email to the Contracting Officer’s Representative, and site visits are optional but encouraged, with registration required by August

Oil and Gas Pipeline and Related Structures Construction

POSTED

DEADLINE

TDA Tainter Valve (TV1) Repair

Solicitation # W9127N26BA032

The U.S. Army Corps of Engineers, Portland District, is seeking bids for the repair and rehabilitation of Tainter Valve TV1 at The Dalles Lock and Dam under a firm-fixed price construction contract. The scope includes comprehensive structural repairs to address cracking, corrosion, and cavitation damage on the valve’s skin plates, girders, and other components as detailed in engineering drawings, with all welds required to meet AWS D1.1 standards. The fabricator must be AISC-certified in a relevant category with a fracture critical endorsement and possess five years of documented experience on similar projects. Component replacements include new top, bottom, and side seals along with all associated seal plates and hardware, installation of armor plates over cavitated areas, and replacement of oversized self-lubricating polymer bushings at the lifting eye and trunnion ends to correct warping, with specifications requiring dynamic bearing pressure of at least 10,000 psi and suitability for submerged marine environments. The valve must be removed from the navigation lock fill culvert, transported to a certified fabrication facility for repairs, and returned for reinstallation with precise dimensional control surveys conducted at removal, post-repair, and pre-reinstallation to ensure proper alignment. The contract has an estimated value between $1 million and $5 million and a performance period of 150 days following notice to proceed. Competition is unrestricted under NAICS code 237990 with a $45 million size standard, and the PSC is Z2KA for dam repair or alteration. Bids are due by August 19, 2026, following a solicitation release in mid-August 2026, with a site visit planned within 7 to 14 days after the solicitation is posted. The government intends to award without discussions but retains the right to conduct them if necessary. All offerors must be registered in the System for Award Management prior to submission and award. The point of contact for technical inquiries is Andrew Sprys and Justin Figueredo, with Michael Stearns available for small business assistance. This presolicitation notice is for informational purposes only and not an invitation to bid; proposals submitted in response will not be evaluated.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

Project Safety Compliance and SSHO Services

Environmental Consulting Services

POSTED

DEADLINE

Removal and Disposal of Existing HVAC Units

All Other Miscellaneous Waste Management Services

POSTED

DEADLINE

HVAC Installation and Commissioning

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

HVAC Equipment Supply – Commercial Heat Pump

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

Detroit Powerhouse Transformer Oil Pumps and Motors Purchase

Solicitation # W9127N26QA135

The U.S. Army Corps of Engineers, Portland District, is soliciting twelve centrifugal pump and induction motor units to replace aging oil circulation pumps at the Detroit Powerhouse in Mill City, Oregon. This procurement, identified as solicitation W9127N26QA135, is issued as a combined synopsis and solicitation under FAR Part 12 for commercial items and is structured as a 100% small business set-aside under NAICS code 333996, with a size standard of 1,250 employees. All offerors must be registered in SAM.gov and provide a valid Unique Entity Identifier (UEI) and CAGE code to be eligible for award. The pumps must replicate the original Allis Chalmers XGHT units in performance and configuration, delivering 160 GPM at 3,500 RPM, operating on 460–480V, 3-phase, 60 Hz, with continuous duty ratings and designed for ambient temperatures between 0°C and 40°C. Material requirements include Viton elastomers, Buna N gaskets, and class 30 cast iron, with all components sealed and dynamically balanced. Technical documentation, including fully detailed shop drawings, performance test data, and specifications aligned with the attached transformer drawing, must be submitted and approved prior to award. Quotes must be submitted via email by 4:30 PM PST on August 13, 2026, and are required to include contractor name, UEI, CAGE code, payment term confirmation (net 30), point of contact, lead time, and an expiration date at least 30 days after the closing date. The price must be firm fixed and include FOB destination terms—meaning the contractor bears all shipping and transportation costs to Detroit Dam, located at 40990 Highway 22, Mill City, OR 97360. Deliveries are restricted to Mondays through Thursdays between 0700 and 1600, excluding federal holidays, and must be completed no later than December 16, 2026. Final acceptance occurs at the delivery site, where the government will inspect and verify compliance against technical specifications and performance test results. All items must be labeled in accordance with MIL-STD-129 and MIL-STD-130, including unique item identifiers marked via Data Matrix symbology compliant with

Fluid Power Pump and Motor Manufacturing

POSTED

DEADLINE

Essayons Bow Thruster VFD Critical Spares

Solicitation # W9127N26QA148

The U.S. Army Corps of Engineers, Portland District, intends to award a sole-source contract to ZF Marine Propulsion Systems Miramar, LLC, for critical spares required to maintain the proprietary bow thruster variable frequency drive (VFD) system aboard the dredge Essayons. This non-competitive action is authorized under 10 U.S.C. 3204(a)(1) and FAR 6.103-1(b) due to the exclusive nature of the components, which are specific to the ZF Model 5001TT bow thruster part number 0803X500 01 and have been in continuous service since 2008. The contract requires delivery of twelve IGBT drivers, three Econo V adapter assemblies, one Frenco Chopper Econopak, one HMI Touch Panel, and three Econo Pack Copper Bar Supports, all essential for continued operational readiness as the system nears end of life. All spares must be delivered to the USACE District Warehouse at 8010 NW St Helens Rd, Portland, OR, no later than 52 weeks after contract award, and will undergo final inspection on-site. No solicitation will be publicly posted, as the procurement is restricted to the single responsible source. The action falls under NAICS code 336611 with a size standard of 1,300 employees. The contract opportunity is identified as W9127N26QA148, with a response deadline of August 20, 2026, and primary point of contact is Julia Carlton, with Ian Lutjens as secondary contact for inquiries.

Ship Building and Repairing

POSTED

DEADLINE

Mini Splits with Heat Pump for Cole M. Rivers Hatchery

Solicitation # W9127N26QA147

The U.S. Army Corps of Engineers, Northwestern Division, Portland District, plans to award a commercial supply with installation contract for nine mini split units with integrated heat pumps at the Cole M. Rivers Hatchery in Trail, Oregon. The contractor will remove and dispose of existing non-functional equipment and install the new units according to annotated blueprints that specify square footage and placement. All work must comply with local, state, and federal regulations. The acquisition is set aside entirely for small businesses under NAICS code 238220, with a size standard of $19.0 million, and falls under Product Service Code 4120 for air conditioning equipment. The solicitation will be issued using the streamlined procedures under FAR 12.201-1(c)(2), allowing direct quotations from qualified suppliers below the simplified acquisition threshold, with responses sent via email to the designated points of contact. The solicitation is anticipated to be released on or about August 20, 2026, with responses due by September 4, 2026, and contract award expected no later than September 30, 2026. The resulting contract will be firm-fixed price with a 90-day performance period. If insufficient competition is received, the request for quotations will be posted on SAM.gov. Vendors must proactively notify the contracting specialist, Lara Krauss, and contracting officer, Mieko Alley, of their interest to receive the solicitation directly. All activity will be managed from the Portland, Oregon office, with performance required at the hatchery site in Trail, Oregon.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

John Day Dam Fish Pump Rehabilitation Project

Solicitation # W9127N26BA031

The John Day Fish Pump Rehabilitation Project is a Department of Defense procurement under solicitation number W9127N26BA031, targeting the major mechanical rehabilitation of Fish Pump Unit 2 at the John Day Lock and Dam on the Columbia River near Rufus, Oregon. The scope includes the removal, refurbishment, and replacement of critical components such as the lower and upper pump shafts, bearings, bearing brackets, and a right-angle drive gearbox, with all shafts requiring true-up machining and replacement of stainless bearing journals with greaseless bearing liners. The contractor must deliver and install a new gearbox along with comprehensive technical documentation, including operation and maintenance manuals, gear design calculations, gearbox detail drawings, and a full set of spare parts for the lube system. Work involves off-site fabrication of steel and composite components and on-site installation, requiring strict adherence to manufacturer specifications for alignment, balancing, and final testing, including pre-test inspections and a final validation prior to returning the system to service. The project is scheduled for performance between November 2026 and July 2029, with a targeted shutdown window for Unit 2 from December 1, 2026, to November 26, 2027. The estimated contract value ranges from $1 million to $5 million, and the procurement is structured as a Total Small Business Set-Aside under FAR 19.5, with NAICS code 237990 and a small business size standard of $45 million. The solicitation is currently in pre-solicitation phase, with the formal invitation for bids expected to be released on or about July 15, 2026, and bids due approximately 30 days after advertisement. All bids must be submitted by the deadline of August 25, 2026, and the procurement is administered by the W071 Endist Portland office of the U.S. Army Corps of Engineers, with direct inquiries directed to Joseph Jarvis. No reimbursement is available for costs incurred during the pre-solicitation phase, and the government reserves the right to cancel the solicitation at any time prior to award.

Other Heavy and Civil Engineering Construction

POSTED

2 days ago

DEADLINE

in 17 days

View Details