Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

HVAC System Installation

Active

Federal

Response Deadline08/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the installation of heating, ventilation, and air conditioning systems, including all necessary ductwork, units, and controls, with the place of performance located at Fort Benning, Georgia, 31905. It is classified as a subcontract under NAICS code 238220, which corresponds to HVAC installation services, and is issued by the Department of Defense under the agency name CONSTRUCTION & EQUIPMENT CONTAINERS. The solicitation was posted on August 5, 2026, with a deadline for responses set for August 17, 2026. No set-aside type is specified, and no point of contact is provided. The full details and submission instructions can be accessed through the DIBBS portal using the provided link.

General Info

HVAC installation contract for Fort Benning, Georgia, under DOD, solicited August 5, 2026, deadline August 17, 2026.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERSView Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

FORT BENNING, GA, 31905, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 5

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installation of heating, ventilation, and air conditioning systems including ductwork, units, and controls.

Similar Contracts

Same NAICS industry code

Infrastructure - Invitation to Bid - Spence Steam regulator replacement

Solicitation # AB-2026-05515

Alberta Infrastructure is seeking bids for the supply and installation of two new Spence steam regulators through solicitation AB-2026-05515, managed by BGIS. The project involves replacing existing steam regulators at a location in Alberta, with all work to be performed on-site. The solicitation was posted on August 5, 2026, and responses are due by August 26, 2026, at 8:00 PM Mountain Time. Kelly Wambold, Operations Manager at BGIS, is the primary point of contact for inquiries, reachable via email at kelly.wambold@bgis.com. The contract requires qualified vendors to provide compliant equipment and skilled installation services meeting provincial infrastructure standards. Bidders must ensure all technical, safety, and scheduling requirements are met to successfully execute the replacement in a timely and regulatory-compliant manner.

POSTED

about 7 hours ago

DEADLINE

Northern Alberta Institute of Technology (NAIT) - Invitation to Bid - D. Building Domestic Hot Water Heater Replacement

Solicitation # AB-2026-05513

The Northern Alberta Institute of Technology is seeking bids for the replacement of domestic hot water heaters in its D Building, under solicitation number AB-2026-05513, with bids due by August 18, 2026. The project requires a qualified mechanical contractor to remove existing equipment and install new domestic hot water heating systems, ensuring compliance with all relevant codes and operational standards. Work must be conducted with minimal disruption to campus activities, and the contractor is expected to manage all logistics, permitting, and site cleanup. The contract is open to all qualified bidders without set-aside restrictions, and all submissions must be received by the deadline. Primary point of contact for inquiries is Marek Holpit, Senior Supply Chain Strategic Consultant, reachable via email at marekh@nait.ca or phone at 780-378-2887. The project is located at NAIT’s campus in Alberta, and detailed technical specifications and bid requirements can be accessed through the official solicitation portal. Bidders are advised to review all documentation thoroughly to ensure full compliance with the scope of work and submission guidelines.

Northern Alberta Institute of Technology

POSTED

about 7 hours ago

DEADLINE

Plumbing and Piping Systems InstallationThe contract pertains to the installation of comprehensive plumbing and piping systems encompassing water supply, drainage, and sanitary piping across facilities at Tinker Air Force Base, with a zip code of 73145-8000. This is a subcontract under NAICS code 238220, issued by the Department of Defense under the agency name CONSTRUCTION & EQUIPMENT MRO SVC I. The solicitation was posted on August 5, 2026, and bids must be submitted by August 17, 2026, with no set-aside provisions designated. The work is focused on ensuring functional, code-compliant plumbing infrastructure for defense-related operations, and all responses must adhere to the technical and logistical requirements specified in the solicitation document accessible via the provided DIBBS link.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 8 hours ago

DEADLINE

Plumbing and Piping Systems Installation

ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

Plumbing and Piping SystemsThe contract is for the installation of potable water, sanitary sewer, and storm drainage systems within buildings or facilities under a subcontract arrangement set aside entirely for small businesses as defined by the SBA. It falls under NAICS code 238220 for plumbing, heating, and air-conditioning contractors and is managed by the Nuclear Reactor Program within the Department of Defense. The opportunity was posted on August 5, 2026, with responses due by August 14, 2026, and performance is required at a location in San Diego, California with a zip code of 92136-3581. All work must comply with applicable standards for municipal infrastructure systems and is intended to support critical defense facilities. The solicitation is accessible through the DIBBS platform for eligible small business contractors.

NUCLEAR REACTOR PROGRAM

POSTED

about 8 hours ago

DEADLINE

Plumbing and Piping SystemsThe contract pertains to the installation of potable water, drainage, and gas piping systems within commercial or industrial facilities, under a subcontract classification with NAICS code 238220 for plumbing, heating, and air-conditioning contractors. The work is scoped for performance at Cherry Point, North Carolina, with a zip code of 28533-0021, and is managed by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on August 5, 2026, with a firm response deadline of August 13, 2026, leaving a limited window for potential subcontractors to submit proposals. All systems must meet stringent operational and safety standards appropriate for defense-related infrastructure, and the successful bidder will be responsible for full compliance with applicable codes and regulations governing utility installation in federal facilities.

Defense Logistics Agency

POSTED

about 8 hours ago

DEADLINE

Plumbing and Piping SystemsThe contract involves the installation of plumbing, water supply, drainage, and HVAC piping systems under a subcontract for the Department of Defense, with the work to be performed in Tracy, California, at the ZIP code 95304-5000. The solicitation, identified by the NAICS code 238220 for plumbing, heating, and air-conditioning contractors, was posted on August 5, 2026, and responses are due by August 17, 2026. The contracting agency is listed as CONSTRUCTION & EQUIPMENT MANU & CON, indicating the project supports defense infrastructure needs. There is no specified set-aside type, and no point of contact is provided in the data, but the official solicitation details can be accessed through the provided DIBBS link. All work must comply with applicable technical and performance standards for military facility construction.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 8 hours ago

DEADLINE

Plumbing and Piping Systems InstallationThe contract titled Plumbing and Piping Systems Installation seeks qualified subcontractors to install comprehensive plumbing systems encompassing water supply, drainage, and gas piping across various buildings and facilities under the jurisdiction of the Department of Defense through its Land Supply Chain office. The work falls under NAICS code 238220 and is classified as a subcontract opportunity with no specific set-aside provisions, indicating open competition among eligible contractors. The solicitation was posted on August 5, 2026, and responses are due by August 25, 2026, providing potential bidders a 20-day window to prepare and submit their proposals. The place of performance is not specified, suggesting work may occur at multiple DoD locations, and no point of contact is listed, requiring interested parties to refer to the provided DIBBS link for additional details and submission requirements.

LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

Plumbing and Piping Systems InstallationThe contract entails the installation of sanitary, storm, and potable water piping systems along with associated fixtures and drainage infrastructure, targeting a military installation at Fort Benning, Georgia, with a ZIP code of 31905. This subcontract falls under the NAICS code 238220 for Plumbing, Heating, and Air-Conditioning Contractors and is being managed by the Department of Defense through its organization, Construction & Equipment Containers. The solicitation was posted on August 5, 2026, with a response deadline set for August 17, 2026, indicating a narrow window for interested parties to submit proposals. All work must be performed at the designated location, and the scope covers comprehensive plumbing systems essential to facility operations, requiring adherence to technical standards for potable water safety, wastewater handling, and stormwater management. Proposals should reflect expertise in large-scale infrastructure installation, particularly within defense-related environments, with no set-aside provisions specified for small or disadvantaged businesses. The official solicitation can be accessed through the DIBBS portal using the provided link.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 8 hours ago

DEADLINE

ESJC – FIRE EXTINGUISHER SERVICES

Solicitation # esjc-fire-extinguisher-services

This solicitation seeks qualified subcontractors to provide quarterly fire extinguisher inspection and replacement services at the Excelsior Springs Job Corps Center in Missouri, encompassing a total of 175 extinguishers across 21 campus buildings and 23 center-owned vehicles. The work requires detailed inspections four times annually, with the contractor responsible for replacing any used, partially used, or uncharged extinguishers with fully charged units, and providing inspection tags for each device. All services must comply with NFPA 101 Life Safety Code, the National Electrical Code, and applicable OSHA regulations, while adhering to all local, state, and federal construction codes. The contract term runs from October 1, 2026, through September 30, 2027, with performance subject to final acceptance by the center, requiring submission of signed punch lists, warranties, and guarantees before payment. Bidders must submit a completed Fee-For-Service Bid Sheet with a detailed cost breakdown, proof of Missouri-specific licensing, vendor paperwork including Form W-9, Vendor Acknowledgement Form, FFATA Notice, and Anti-Lobbying Certification, along with certificates of insurance covering automobile, liability, and workers compensation. Payment will be issued within 30 days of invoicing, and all deliverables are F.O.B. destination. The procurement is designated as a subcontracting opportunity under a Small Business set-aside that includes eligibility for Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business concerns. Compliance with federal labor standards is mandatory, including the Service Contract Act, minimum wage requirements under Executive Order 14026, and the Davis-Bacon Act, with additional requirements for debarment certification, anti-lobbying compliance, and active SAM.gov registration with a Unique Entity ID. Bidders must conduct a site visit, submit proposals in ink or typewritten format with no erasures, and ensure all documents are received by 12 p.m. CST on August 14, 2026. The award will be based on best overall value, not lowest price, with the contracting officer serving as the sole judge of technical merit, compliance, and responsiveness. Contractors and personnel are strictly prohibited from fraternizing with students or staff and from bringing alcohol, tobacco products, drugs, or firearms onto the center premises.

ETR/Excelsior Springs Job Corps

POSTED

about 9 hours ago

DEADLINE

IE JCC HVAC Replacements

Solicitation # ie-jcc-hvac-replacements

This contract is a fixed-price, lump-sum subcontracting opportunity issued by Management & Training Corporation (MTC) on behalf of the U.S. Department of Labor for HVAC replacements at the Inland Empire Job Corps Center in San Bernardino, California. The scope includes furnishing and installing three new packaged HVAC units with gas heating, removing and disposing of existing units in compliance with EPA refrigerant recovery regulations, reconnecting and modifying gas piping and ductwork, installing new electrical disconnects and programmable thermostats, and performing comprehensive startup, testing, and commissioning that verifies critical safety functions such as the automatic closure of fresh air intake dampers during fire activation. All work must adhere to Title 24, the 2024 International Mechanical Code, the 2024 International Energy Conservation Code, and ASHRAE 90.1-2022 standards. Deliverables include manufacturer and workmanship warranties, operation and maintenance manuals, test records, disposal documentation, and completion of at least two hours of on-site training for facility personnel. The contract requires a 100-day consecutive business day performance period following receipt of a Notice to Proceed, with an onsite pre-construction meeting mandatory prior to work commencement. The solicitation is set aside exclusively for small business concerns under multiple SBA categories including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business. Bidders must hold a valid UEI number, provide Tax ID and DUNS number, and formally represent their business classification per NAICS code 238220. All contractors and first-tier subcontractors exceeding $30,000 must disclose debarment status, and all offerors must certify they are not suspended or debarred by any federal agency. Bid requirements include a detailed cost breakdown covering materials, labor with apprenticeship documentation, equipment, permits, bonds, overhead, and profit; a signed MTC bid form; supplier packet with W-9 and terms acceptance; and mandatory site visit verification. For bids $25,000 or more, a 20% bid bond and subsequent performance and payment bonds at 100% of contract value are required, with sureties holding at least an A rating. Insurance mandates include $1 million per occurrence general liability with MTC/DOL as additional insured, $1 million auto, and $500,000 workers’ compensation. Weekly

MTC Inland Empire Job Corps

POSTED

about 9 hours ago

DEADLINE

Boiler replacement in IOOF and Administration

Solicitation # boiler-replacement-ioof-administration

The contract seeks a licensed HVAC contractor to replace three boilers across two buildings at the Flint Hills Job Corps Center in Manhattan, Kansas—specifically, two existing Peerless gas-fired boilers in Building 1 (IOOF) and a new high-efficiency gas-fired boiler in Building 2 (Administrative/Academic). The project requires installation of boilers meeting specified output and efficiency standards: 1,680,000 B.T.U. input and 1,344,000 B.T.U. output for the IOOF boilers, and a 94% Energy Star-efficient 600,000 B.T.U. input unit for the administrative building, along with full commissioning of the boiler control systems by a qualified agent. All work must comply with the latest editions of NEC, NFPA-72, NFPA 101, IBC, IMC, IPC, IECC, and IFGC standards, as well as Kansas state codes. Environmental and safety regulations under EPA 40CFR761, 40 CFR 61 subpart m, and OSHA 29CFR1926 must be strictly followed, and the contractor is responsible for securing all necessary local permits and maintaining current licensing. The work is governed by strict performance timelines, with a Notice to Proceed triggering a mandatory start within 14 days and total completion—including punch list items—required within 120 calendar days. Substantial completion is targeted at 60 days after notice to proceed, followed by a 30-day close-out phase, and the contractor must provide written notice at least seven days in advance to schedule a walk-through for substantial completion certification. Final acceptance requires submission of inspection reports, test results, warranties, commissioning documentation, O&M manuals, manufacturer start-up checklists, and third-party water test results. Pricing is to be submitted in a detailed format breaking down labor hours, materials, and total costs, with award determined solely on price and price-related factors after a material compliance pass/fail gate. The contractor must provide a W-9 and DUNS# with the proposal, carry liability insurance naming the Center as both certificate holder and additional insured, and adhere to strict conduct rules prohibiting fraternization, alcohol, drugs, firearms, and use of center food services. Warranties include ten years for boiler heat exchangers, two years for all other parts, one year for workmanship, and a one-year preventive maintenance agreement

Serrato Corporation DBA Flint Hills Job Corps

POSTED

about 9 hours ago

DEADLINE

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS

Same awarding agency

Commercial Laundry Drying Tumbler SupplyThe contract entails the supply of six commercial-grade laundry drying tumblers, requiring the contractor to manufacture or source the equipment, ensure proper packaging and labeling, and deliver the units to a government-designated location in San Diego, California, with the ZIP code 92136-3581. The work falls under NAICS code 333310, which classifies it within the laundry and dry-cleaning machinery manufacturing sector, and is structured as a subcontract under the Department of Defense, specifically managed by the CONSTRUCTION & EQUIPMENT CONTAINERS organization. All deliveries must be completed by the response deadline of August 17, 2026, following the solicitation release on August 5, 2026, with no set-aside provisions specified, meaning the contract is open to eligible general contractors without restrictions based on business size or category.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 8 hours ago

DEADLINE

Low-Voltage and Communication SystemsThe contract is for the installation of low-voltage and communication systems including cabling and devices for communication, data, fire alarm, and security systems at Fort Benning, Georgia, under the Department of Defense. This subcontract is classified under NAICS code 238210, which pertains to electrical and wiring installations, and the work is expected to be performed at the specified military installation. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, indicating a short turnaround time for interested vendors to submit proposals. The contract does not specify a set-aside type or organization type, suggesting it is open to qualified subcontractors without demographic or size-based preferences. All technical work must comply with military standards for safety, reliability, and integration within existing infrastructure, and performance is strictly tied to the location at Fort Benning with a zip code of 31905.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 8 hours ago

DEADLINE

Structural Steel ErectionThe contract pertains to the fabrication and erection of a structural steel framework for a tower and associated support buildings at Fort Benning, Georgia, with a NAICS code of 238120 indicating it is classified under Structural Steel Erection. This is a subcontract opportunity issued by the Department of Defense through the agency name CONSTRUCTION & EQUIPMENT CONTAINERS, with a response deadline of August 17, 2026, and a posting date of August 5, 2026. Work is to be performed at the designated location in Fort Benning, where the structural components will be manufactured and assembled on-site to meet the military facility’s engineering specifications. The contract does not specify any set-aside preferences or subcontractor eligibility restrictions, and it is open to qualified vendors who can fulfill the technical and logistical requirements for steel fabrication and erection. Interested parties must submit proposals through the DIBBS portal prior to the deadline to be considered for award.

Structural Steel and Precast Concrete Contractors

POSTED

about 8 hours ago

DEADLINE

Concrete Formwork and PlacementThe contract titled Concrete Formwork and Placement involves the full scope of forming, reinforcing, and pouring concrete for foundations, slabs, and structural elements at Fort Benning, Georgia, with a zip code of 31905. It is categorized as a subcontract under NAICS code 238110, which corresponds to concrete work services, and is procured by the Department of Defense through its organization Construction & Equipment Containers. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, with all work required to be performed on-site at the designated military installation. The contract does not specify a set-aside type or point of contact, and interested parties must submit proposals through the official DIBBS platform using the provided link.

Poured Concrete Foundation and Structure Contractors

POSTED

about 8 hours ago

DEADLINE

Electrical Installation and Wiring ServicesThe contract involves the installation of electrical systems for commercial or infrastructure projects under the Department of Defense, specifically managed by CONSTRUCTION & EQUIPMENT CONTAINERS. It includes comprehensive electrical work such as wiring, conduits, lighting, and power distribution, all to be performed at Fort Benning, Georgia, with a ZIP code of 31905. This is a subcontract opportunity classified under NAICS code 238210, which pertains to electrical contracting services. The solicitation was posted on August 5, 2026, and responses must be submitted by August 17, 2026, with no set-aside provisions specified. The contract is accessible via the DIBBS procurement portal, and no point of contact information is provided in the posting.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 8 hours ago

DEADLINE

MANIFOLD, STEAM COIL

Solicitation # SPE8ED-26-T-1227

The contract is for the procurement of 14 units of a MANIFOLD, STEAM COIL with NSN 3510-01-148-1692 and part number TU2413, supplied by EDRO CORPORATION DBA DYNAWASH. Delivery is required within 167 days, with shipment FOB origin and inspection and acceptance occurring at the destination warehouse in Tracy, California. The unit price is $14.00, resulting in a total contract value of $196.00. Packaging must conform to MIL-STD-2073-1E with specific preservation methods, and marking must comply with MIL-STD-129 without special markings. The contract prohibits intentional inclusion of mercury or mercury compounds in the supplied hardware except for specific exempted applications such as functional components in batteries, lamps, instruments, sensors, weapon systems, or chemical reagents specified by NAVSEA, with portable mercury-containing devices requiring shockproof design and a secondary containment barrier per NAVSEA 5100-003D. Technical and quality requirements referenced via R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date depending on acquisition size. All documentation must adhere to DLA packaging, shipping, and source approval procedures, and transportation details are governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE8ED-26-T-1227, issued on August 5, 2026, with responses due by August 17, 2026, under NAICS code 333310, and the point of contact is Takawira Ndiripo.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 8 hours ago

DEADLINE

CUSHION, BOTTOM, EXPL

Solicitation # SPE8ED-26-T-1223

The item is a cushion designed for bottom use in a shipping and storage container, identified by NSN 8135-01-029-1285, with a quantity of 52 units required under purchase request 7017758186. Delivery is scheduled 167 days after award. The solicitation number is SPE8ED-26-T-1223, posted on August 5, 2026, with responses due by August 17, 2026. This procurement falls under NAICS code 336413 and is managed by the Department of Defense under the Construction & Equipment Containers organization, with performance to be completed in Tracy, California, 95304-5000. Ogden Howard is the primary point of contact, reachable via email and phone provided. Technical data associated with this item is subject to export controls under either ITAR or EAR, restricting its disclosure or transfer to foreign persons, regardless of location, including employees of foreign subsidiaries of U.S. companies. Access to this controlled data is limited to DLA contractors with an approved U.S./Canada Joint Certification Program certification, who have completed mandatory training on handling DOD export-controlled technical data and have been formally authorized by DLA. Compliance with DFARS 252.225-7048 is required, and failure to adhere to these controls may result in legal penalties. The solicitation is publicly accessible through the DIBBS system.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

SHIPPING AND STORAG

Solicitation # SPE8ED-26-T-1238

The contract pertains to the shipping and storage of four units identified by NSN 8145-01-715-7517 under solicitation SPE8ED-26-T-1238, with a delivery deadline of 167 days from award. The supplier must comply with rigorous quality and technical requirements, including adherence to MIL-STD-1916 or ASQ H1331 sampling standards, where critical, major, and minor attributes are verified at levels VII, IV, and II respectively, or with AQLs of 0.1, 1.0, and 4.0. Zero non-conformances are required in sampling unless otherwise stipulated, and manufacturers may choose attribute or variable inspection methods. The item is subject to export controls under ITAR or EAR, restricting technical data access to contractors with a valid US/Canada Joint Certification Program certification, completion of required DOD export control training, and approved access through DLA. All technical data is governed by DFARS 252.225-7048 and may not be disclosed to foreign persons regardless of location. Packaging must meet DLA requirements, and government identification must be removed from non-accepted supplies. Design drawings are accessible only during open solicitation via the DIBBS portal. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and performance is to be delivered to New Cumberland, PA, 17070-5002. Primary point of contact is Ogden Howard at the Defense Logistics Agency.

Other Metal Container Manufacturing

POSTED

about 8 hours ago

DEADLINE

SHIPPING AND STORAG

Solicitation # SPE8ED-26-T-1234

This contract, issued under solicitation SPE8ED-26-T-1234 by the Department of Defense’s Defense Logistics Agency, requires Pelican Products, Inc. to supply three units of item 8145016806074 at a unit price of $3.00, totaling $9.00, with delivery due within 167 days from the award date, no later than February 1, 2027. Goods must be shipped FOB origin with zero variance in quantity and inspected at destination. All items must comply with the DLA Master List of Technical and Quality Requirements, which override any conflicting industry standards, and packaging must follow ASTM D3951 as supplemented by MIL-STD-129 for labeling and marking, in strict accordance with DLA Packaging Requirements for Procurement. Palletization and unit packaging must adhere to the specified QUP and UI standards, and all government identification must be removed from non-accepted supplies. Delivery is directed to the specified receiving warehouse in Tracy, California, under transportation guidelines C19 and C20, with full and open competition in effect. The contract incorporates technical specifications referenced by R and I numbers from the DLA database, and the awarded supplier is obligated to meet all quality, packaging, and documentation criteria without exception.

Other Metal Container Manufacturing

POSTED

about 8 hours ago

DEADLINE

BELT, ARM SHAFT

Solicitation # SPE8ED-26-T-1222

The contract specifies the procurement of 34 units of a BELT, ARM SHAFT with NSN 3530-00-845-0805 under solicitation SPE8ED-26-T-1222, with a required delivery date of November 26, 2026, and a delivery window of 167 days. The item is to be delivered FOB origin with zero variance in quantity, inspected and accepted at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping, and unit containment, and marking must adhere to MIL-STD-129 with no special marking codes. Palletization follows DLA’s packaging requirements, and the shipment is destined for DDSP New Cumberland, PA. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II (or AQLs of 0.1, 1.0, and 4.0). Unspecified attributes are deemed major, and acceptance requires zero non-conformances unless otherwise stated. Mercury and mercury-containing compounds are prohibited unless exempted for specific functional applications like batteries or sensors, and portable items containing mercury must be shock-proof with secondary containment per NAVSEA 5100-003D. The contract incorporates technical and quality requirements referenced in the DLA Master List, with revisions controlled by the solicitation or award date. The purchase request is 7017757874, and the point of contact is Takawira Ndiripo at DLA.

All Other Industrial Machinery Manufacturing

POSTED

about 8 hours ago

DEADLINE

SHIPPING AND STORAG

Solicitation # SPE8ED-26-T-1232

This contract pertains to the procurement of two shipping and storage containers with part number 890325 and NSN 8145-01-632-9661 under solicitation SPE8ED-26-T-1232, issued by the Department of Defense through the Defense Logistics Agency. The items must be packaged in strict compliance with ASTM D3951, but all applicable DLA Master List of Technical and Quality Requirements—identified by R or I numbers and accessible via the official DLA website—take precedence. Packaging and labeling must adhere to MIL-STD-129, and palletization must conform to RP001: DLA Packaging Requirements for Procurement. The United States Government requires removal of all government identification from non-accepted supplies, and the containers are subject to inspection and acceptance at the destination point. Delivery is mandated FOB origin, with a required delivery window of 167 days from the contract award and an original required delivery date of November 6, 2026. The final shipment must be completed by February 1, 2027. The quantity is fixed at two units with zero tolerance for variance. Freight shipments must be directed to the DLA Distribution facility at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002, as specified in DLAD Proc Note C19 and C20 for transportation protocols. The contract specifies a unit price of $2.00 per item, totaling $4.00. The supplier, Paratech, Incorporated, must comply with all technical, quality, and logistical standards outlined, including handling of Covered Defense Information as defined under RD003. The solicitation was issued on August 5, 2026, with responses due by August 17, 2026, and is classified under NAICS code 336413 for defense equipment manufacturing.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE