Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Plumbing and Piping Systems Installation

Active

Federal

Response Deadline08/25/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Plumbing and Piping Systems Installation seeks qualified subcontractors to install comprehensive plumbing systems encompassing water supply, drainage, and gas piping across various buildings and facilities under the jurisdiction of the Department of Defense through its Land Supply Chain office. The work falls under NAICS code 238220 and is classified as a subcontract opportunity with no specific set-aside provisions, indicating open competition among eligible contractors. The solicitation was posted on August 5, 2026, and responses are due by August 25, 2026, providing potential bidders a 20-day window to prepare and submit their proposals. The place of performance is not specified, suggesting work may occur at multiple DoD locations, and no point of contact is listed, requiring interested parties to refer to the provided DIBBS link for additional details and submission requirements.

General Info

Subcontract for plumbing, drainage, and gas piping at DoD sites; bids due August 25, 2026.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 5

subcontract

Response DeadlineAug 25

Submission deadline

Response Deadline

08/25/2026, 05:00:00 PM UTCin 20 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installation of plumbing systems including water supply, drainage, and gas piping for buildings or facilities.

Similar Contracts

Same NAICS industry code

Infrastructure - Invitation to Bid - Spence Steam regulator replacement

Solicitation # AB-2026-05515

Alberta Infrastructure is seeking bids for the supply and installation of two new Spence steam regulators through solicitation AB-2026-05515, managed by BGIS. The project involves replacing existing steam regulators at a location in Alberta, with all work to be performed on-site. The solicitation was posted on August 5, 2026, and responses are due by August 26, 2026, at 8:00 PM Mountain Time. Kelly Wambold, Operations Manager at BGIS, is the primary point of contact for inquiries, reachable via email at kelly.wambold@bgis.com. The contract requires qualified vendors to provide compliant equipment and skilled installation services meeting provincial infrastructure standards. Bidders must ensure all technical, safety, and scheduling requirements are met to successfully execute the replacement in a timely and regulatory-compliant manner.

POSTED

about 7 hours ago

DEADLINE

Northern Alberta Institute of Technology (NAIT) - Invitation to Bid - D. Building Domestic Hot Water Heater Replacement

Solicitation # AB-2026-05513

The Northern Alberta Institute of Technology is seeking bids for the replacement of domestic hot water heaters in its D Building, under solicitation number AB-2026-05513, with bids due by August 18, 2026. The project requires a qualified mechanical contractor to remove existing equipment and install new domestic hot water heating systems, ensuring compliance with all relevant codes and operational standards. Work must be conducted with minimal disruption to campus activities, and the contractor is expected to manage all logistics, permitting, and site cleanup. The contract is open to all qualified bidders without set-aside restrictions, and all submissions must be received by the deadline. Primary point of contact for inquiries is Marek Holpit, Senior Supply Chain Strategic Consultant, reachable via email at marekh@nait.ca or phone at 780-378-2887. The project is located at NAIT’s campus in Alberta, and detailed technical specifications and bid requirements can be accessed through the official solicitation portal. Bidders are advised to review all documentation thoroughly to ensure full compliance with the scope of work and submission guidelines.

Northern Alberta Institute of Technology

POSTED

about 7 hours ago

DEADLINE

Plumbing and Piping Systems InstallationThe contract pertains to the installation of comprehensive plumbing and piping systems encompassing water supply, drainage, and sanitary piping across facilities at Tinker Air Force Base, with a zip code of 73145-8000. This is a subcontract under NAICS code 238220, issued by the Department of Defense under the agency name CONSTRUCTION & EQUIPMENT MRO SVC I. The solicitation was posted on August 5, 2026, and bids must be submitted by August 17, 2026, with no set-aside provisions designated. The work is focused on ensuring functional, code-compliant plumbing infrastructure for defense-related operations, and all responses must adhere to the technical and logistical requirements specified in the solicitation document accessible via the provided DIBBS link.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 8 hours ago

DEADLINE

Plumbing and Piping Systems Installation

ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

Plumbing and Piping SystemsThe contract is for the installation of potable water, sanitary sewer, and storm drainage systems within buildings or facilities under a subcontract arrangement set aside entirely for small businesses as defined by the SBA. It falls under NAICS code 238220 for plumbing, heating, and air-conditioning contractors and is managed by the Nuclear Reactor Program within the Department of Defense. The opportunity was posted on August 5, 2026, with responses due by August 14, 2026, and performance is required at a location in San Diego, California with a zip code of 92136-3581. All work must comply with applicable standards for municipal infrastructure systems and is intended to support critical defense facilities. The solicitation is accessible through the DIBBS platform for eligible small business contractors.

NUCLEAR REACTOR PROGRAM

POSTED

about 8 hours ago

DEADLINE

Plumbing and Piping SystemsThe contract pertains to the installation of potable water, drainage, and gas piping systems within commercial or industrial facilities, under a subcontract classification with NAICS code 238220 for plumbing, heating, and air-conditioning contractors. The work is scoped for performance at Cherry Point, North Carolina, with a zip code of 28533-0021, and is managed by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on August 5, 2026, with a firm response deadline of August 13, 2026, leaving a limited window for potential subcontractors to submit proposals. All systems must meet stringent operational and safety standards appropriate for defense-related infrastructure, and the successful bidder will be responsible for full compliance with applicable codes and regulations governing utility installation in federal facilities.

Defense Logistics Agency

POSTED

about 8 hours ago

DEADLINE

Plumbing and Piping SystemsThe contract involves the installation of plumbing, water supply, drainage, and HVAC piping systems under a subcontract for the Department of Defense, with the work to be performed in Tracy, California, at the ZIP code 95304-5000. The solicitation, identified by the NAICS code 238220 for plumbing, heating, and air-conditioning contractors, was posted on August 5, 2026, and responses are due by August 17, 2026. The contracting agency is listed as CONSTRUCTION & EQUIPMENT MANU & CON, indicating the project supports defense infrastructure needs. There is no specified set-aside type, and no point of contact is provided in the data, but the official solicitation details can be accessed through the provided DIBBS link. All work must comply with applicable technical and performance standards for military facility construction.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 8 hours ago

DEADLINE

HVAC System InstallationThe contract involves the installation of heating, ventilation, and air conditioning systems, including all necessary ductwork, units, and controls, with the place of performance located at Fort Benning, Georgia, 31905. It is classified as a subcontract under NAICS code 238220, which corresponds to HVAC installation services, and is issued by the Department of Defense under the agency name CONSTRUCTION & EQUIPMENT CONTAINERS. The solicitation was posted on August 5, 2026, with a deadline for responses set for August 17, 2026. No set-aside type is specified, and no point of contact is provided. The full details and submission instructions can be accessed through the DIBBS portal using the provided link.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 8 hours ago

DEADLINE

Plumbing and Piping Systems InstallationThe contract entails the installation of sanitary, storm, and potable water piping systems along with associated fixtures and drainage infrastructure, targeting a military installation at Fort Benning, Georgia, with a ZIP code of 31905. This subcontract falls under the NAICS code 238220 for Plumbing, Heating, and Air-Conditioning Contractors and is being managed by the Department of Defense through its organization, Construction & Equipment Containers. The solicitation was posted on August 5, 2026, with a response deadline set for August 17, 2026, indicating a narrow window for interested parties to submit proposals. All work must be performed at the designated location, and the scope covers comprehensive plumbing systems essential to facility operations, requiring adherence to technical standards for potable water safety, wastewater handling, and stormwater management. Proposals should reflect expertise in large-scale infrastructure installation, particularly within defense-related environments, with no set-aside provisions specified for small or disadvantaged businesses. The official solicitation can be accessed through the DIBBS portal using the provided link.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 8 hours ago

DEADLINE

ESJC – FIRE EXTINGUISHER SERVICES

Solicitation # esjc-fire-extinguisher-services

This solicitation seeks qualified subcontractors to provide quarterly fire extinguisher inspection and replacement services at the Excelsior Springs Job Corps Center in Missouri, encompassing a total of 175 extinguishers across 21 campus buildings and 23 center-owned vehicles. The work requires detailed inspections four times annually, with the contractor responsible for replacing any used, partially used, or uncharged extinguishers with fully charged units, and providing inspection tags for each device. All services must comply with NFPA 101 Life Safety Code, the National Electrical Code, and applicable OSHA regulations, while adhering to all local, state, and federal construction codes. The contract term runs from October 1, 2026, through September 30, 2027, with performance subject to final acceptance by the center, requiring submission of signed punch lists, warranties, and guarantees before payment. Bidders must submit a completed Fee-For-Service Bid Sheet with a detailed cost breakdown, proof of Missouri-specific licensing, vendor paperwork including Form W-9, Vendor Acknowledgement Form, FFATA Notice, and Anti-Lobbying Certification, along with certificates of insurance covering automobile, liability, and workers compensation. Payment will be issued within 30 days of invoicing, and all deliverables are F.O.B. destination. The procurement is designated as a subcontracting opportunity under a Small Business set-aside that includes eligibility for Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business concerns. Compliance with federal labor standards is mandatory, including the Service Contract Act, minimum wage requirements under Executive Order 14026, and the Davis-Bacon Act, with additional requirements for debarment certification, anti-lobbying compliance, and active SAM.gov registration with a Unique Entity ID. Bidders must conduct a site visit, submit proposals in ink or typewritten format with no erasures, and ensure all documents are received by 12 p.m. CST on August 14, 2026. The award will be based on best overall value, not lowest price, with the contracting officer serving as the sole judge of technical merit, compliance, and responsiveness. Contractors and personnel are strictly prohibited from fraternizing with students or staff and from bringing alcohol, tobacco products, drugs, or firearms onto the center premises.

ETR/Excelsior Springs Job Corps

POSTED

about 9 hours ago

DEADLINE

IE JCC HVAC Replacements

Solicitation # ie-jcc-hvac-replacements

This contract is a fixed-price, lump-sum subcontracting opportunity issued by Management & Training Corporation (MTC) on behalf of the U.S. Department of Labor for HVAC replacements at the Inland Empire Job Corps Center in San Bernardino, California. The scope includes furnishing and installing three new packaged HVAC units with gas heating, removing and disposing of existing units in compliance with EPA refrigerant recovery regulations, reconnecting and modifying gas piping and ductwork, installing new electrical disconnects and programmable thermostats, and performing comprehensive startup, testing, and commissioning that verifies critical safety functions such as the automatic closure of fresh air intake dampers during fire activation. All work must adhere to Title 24, the 2024 International Mechanical Code, the 2024 International Energy Conservation Code, and ASHRAE 90.1-2022 standards. Deliverables include manufacturer and workmanship warranties, operation and maintenance manuals, test records, disposal documentation, and completion of at least two hours of on-site training for facility personnel. The contract requires a 100-day consecutive business day performance period following receipt of a Notice to Proceed, with an onsite pre-construction meeting mandatory prior to work commencement. The solicitation is set aside exclusively for small business concerns under multiple SBA categories including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business. Bidders must hold a valid UEI number, provide Tax ID and DUNS number, and formally represent their business classification per NAICS code 238220. All contractors and first-tier subcontractors exceeding $30,000 must disclose debarment status, and all offerors must certify they are not suspended or debarred by any federal agency. Bid requirements include a detailed cost breakdown covering materials, labor with apprenticeship documentation, equipment, permits, bonds, overhead, and profit; a signed MTC bid form; supplier packet with W-9 and terms acceptance; and mandatory site visit verification. For bids $25,000 or more, a 20% bid bond and subsequent performance and payment bonds at 100% of contract value are required, with sureties holding at least an A rating. Insurance mandates include $1 million per occurrence general liability with MTC/DOL as additional insured, $1 million auto, and $500,000 workers’ compensation. Weekly

MTC Inland Empire Job Corps

POSTED

about 9 hours ago

DEADLINE

Boiler replacement in IOOF and Administration

Solicitation # boiler-replacement-ioof-administration

The contract seeks a licensed HVAC contractor to replace three boilers across two buildings at the Flint Hills Job Corps Center in Manhattan, Kansas—specifically, two existing Peerless gas-fired boilers in Building 1 (IOOF) and a new high-efficiency gas-fired boiler in Building 2 (Administrative/Academic). The project requires installation of boilers meeting specified output and efficiency standards: 1,680,000 B.T.U. input and 1,344,000 B.T.U. output for the IOOF boilers, and a 94% Energy Star-efficient 600,000 B.T.U. input unit for the administrative building, along with full commissioning of the boiler control systems by a qualified agent. All work must comply with the latest editions of NEC, NFPA-72, NFPA 101, IBC, IMC, IPC, IECC, and IFGC standards, as well as Kansas state codes. Environmental and safety regulations under EPA 40CFR761, 40 CFR 61 subpart m, and OSHA 29CFR1926 must be strictly followed, and the contractor is responsible for securing all necessary local permits and maintaining current licensing. The work is governed by strict performance timelines, with a Notice to Proceed triggering a mandatory start within 14 days and total completion—including punch list items—required within 120 calendar days. Substantial completion is targeted at 60 days after notice to proceed, followed by a 30-day close-out phase, and the contractor must provide written notice at least seven days in advance to schedule a walk-through for substantial completion certification. Final acceptance requires submission of inspection reports, test results, warranties, commissioning documentation, O&M manuals, manufacturer start-up checklists, and third-party water test results. Pricing is to be submitted in a detailed format breaking down labor hours, materials, and total costs, with award determined solely on price and price-related factors after a material compliance pass/fail gate. The contractor must provide a W-9 and DUNS# with the proposal, carry liability insurance naming the Center as both certificate holder and additional insured, and adhere to strict conduct rules prohibiting fraternization, alcohol, drugs, firearms, and use of center food services. Warranties include ten years for boiler heat exchangers, two years for all other parts, one year for workmanship, and a one-year preventive maintenance agreement

Serrato Corporation DBA Flint Hills Job Corps

POSTED

about 9 hours ago

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

Supply of Installer, Bushing (End-Item Manufacturer or Distributor)The contract involves the manufacture or supply of a single bushing installer as a finished end item that must fully comply with applicable military or federal specifications. The item must be delivered in complete, ready-to-use condition and meet all technical, quality, and performance standards required by defense procurement guidelines. The contractor is responsible for ensuring compliance with hazardous materials disclosure and labeling requirements, including proper documentation and placement of safety and regulatory markings per federal mandates. The solicitation is classified as a subcontract under NAICS code 332999, with a response deadline of August 17, 2026, and a posted date of August 5, 2026. Performance is required at Fort Riley, Kansas, with a specific zip code of 66442-0345. The contracting agency is the Department of Defense through the Land Supply Chain organization. No set-aside preferences are indicated, and no point of contact details are provided in the posting. All submissions must be made through the designated DIBBS platform using the provided link.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 8 hours ago

DEADLINE

Freight and Heavy Haul TransportationThe contract, titled Freight and Heavy Haul Transportation, is a subcontract under the Department of Defense’s LAND SUPPLY CHAIN agency, aimed at transporting oversized or heavy construction materials, equipment, and components to designated project sites. It is classified under NAICS code 484220, which pertains to truck transportation for heavy and specialized freight, and is open for bidding with a response deadline of August 25, 2026. The work will involve coordinating complex logistics for loads that exceed standard dimensions or weight limits, requiring specialized equipment, permits, route planning, and compliance with safety and regulatory standards. Performance is expected to occur across unspecified locations tied to DoD infrastructure projects, with bidders responsible for ensuring timely, secure, and damage-free delivery under potentially challenging conditions. There is no set-aside designation, making this opportunity available to all qualified contractors regardless of business size or category.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 8 hours ago

DEADLINE

Environmental Compliance and RemediationThe contract titled Environmental Compliance and Remediation seeks subcontractors to provide environmental site assessments, permitting support, stormwater management, and remediation oversight services under a subcontract arrangement. The solicitation is managed by the Department of Defense through the LAND SUPPLY CHAIN organization and is classified under NAICS code 541620, which corresponds to environmental consulting services. The opportunity was posted on August 5, 2026, with a response deadline of August 25, 2026, and is intended to support environmental compliance efforts across unspecified federal properties. While the exact location of performance is not specified, work is expected to align with Department of Defense environmental standards and regulatory requirements. The subcontractor will be responsible for delivering technical expertise in environmental assessment and remediation activities to ensure adherence to applicable laws and mitigation of site-specific environmental risks.

Environmental Consulting Services

POSTED

about 8 hours ago

DEADLINE

Surveying and Site LayoutThe contract pertains to surveying and site layout services essential for construction activities, encompassing topographic surveying, boundary determination, and precise spatial positioning of development elements. These tasks are critical to ensuring accurate planning and execution of infrastructure projects, with deliverables requiring high precision to meet engineering and regulatory standards. The work is solicited as a subcontract under NAICS code 541370, which classifies it within the surveying and mapping services sector, and is managed by the Department of Defense through its LAND SUPPLY CHAIN organization. The solicitation was posted on August 5, 2026, with a firm response deadline of August 25, 2026, indicating a four-week window for potential subcontractors to submit proposals. Although specific location details for performance are not provided, the project is tied to U.S. Department of Defense operations, suggesting potential work on military installations or defense-related infrastructure. The absence of set-aside designation implies the opportunity is open to all eligible contractors, and interested parties must access the official DIBBS portal to obtain full solicitation documentation and submission requirements.

Surveying and Mapping (except Geophysical) Services

POSTED

about 8 hours ago

DEADLINE

Road and Highway PavingThe contract solicits subcontracting services for grading, base preparation, and asphalt or concrete paving tasks associated with roadways, parking lots, and airfields. It is categorized under NAICS code 237310, which specifically covers highway and street construction, and is issued by the Department of Defense under the Land Supply Chain organization. The solicitation was posted on August 5, 2026, with a response deadline of August 25, 2026, indicating a firm timeline for interested parties to submit proposals. While the exact location of performance is not specified, the work is expected to support U.S. military infrastructure needs across unspecified sites. The contract type is designated as a subcontract, implying that the winning entity will likely be contracted by a prime contractor rather than directly by the government. All proposals must align with the technical scope of earthwork, base layer installation, and paving for surfaces designed to handle vehicular and aircraft traffic under rigorous performance standards.

Highway, Street, and Bridge Construction

POSTED

about 8 hours ago

DEADLINE

Concrete Forming and PlacementConcrete forming, reinforcement, and placement services are being solicited for the construction of foundations, slabs, walls, and other structural elements under a subcontract classified under NAICS code 238110. The work is tied to the Department of Defense through the Land Supply Chain organization, with performance expected to occur at an unspecified location. The solicitation was posted on August 5, 2026, and responses are due by August 25, 2026, with no set-aside provisions applied. Interested parties must submit proposals through the official DIBBS portal prior to the deadline to be considered for award. All work must adhere to standard practices for structural concrete application and meet the technical and quality requirements inherent to defense construction projects.

Poured Concrete Foundation and Structure Contractors

POSTED

about 8 hours ago

DEADLINE

Electrical Installation and Wiring ServicesThe contract titled Electrical Installation and Wiring Services pertains to the installation of electrical systems for commercial or infrastructure projects, encompassing power distribution, lighting, and control wiring. It is issued as a subcontract under the NAICS code 238210, which classifies electrical contracting activities, and is managed by the Department of Defense through its LAND SUPPLY CHAIN organization. The solicitation was posted on August 5, 2026, with a response deadline set for August 25, 2026, and participation is open to qualified subcontractors responding to the request. The performance location and specific project details are not specified in the provided data, but the work is expected to support defense-related infrastructure needs. Interested parties must submit proposals through the designated DIBBS portal before the deadline, and no set-aside provisions or agency-specific restrictions are indicated.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 8 hours ago

DEADLINE

Precision-Machined Knob Supply (NSN 5355005598943)The contract entails the supply of 249 precision-engineered knobs identified by NSN 5355005598943, manufactured to meet strict military specifications. Each unit must be produced with exacting tolerances and engineered for reliable performance in demanding operational environments. All items require compliant packaging and labeling in accordance with MIL-STD-129 standards to ensure proper identification, traceability, and handling throughout the logistics chain. Delivery is specified to a Department of Defense destination in Jacksonville, Florida, with the facility address finalized as 32212-0103, indicating the final logistics endpoint for these critical components. The contract is structured as a subcontract under the NAICS code 332710, which corresponds to the manufacturing of machine shops and precision parts. It was posted on August 5, 2026, with a mandatory response deadline of August 17, 2026, and is administered by the Land Supply Chain division of the Department of Defense. The procurement is part of a broader effort to maintain reliable inventory of regulated military hardware, and participation is subject to full compliance with federal supply standards, including adherence to performance, quality, and documentation requirements. The official solicitation can be accessed through the DIBBS portal, where further technical and administrative details are available to potential bidders.

POSTED

about 8 hours ago

DEADLINE

Bumper Supply with Export-Controlled Technical Data ComplianceThe contract calls for the supply of 213 units of a bumper identified by NSN 5340015779616, with strict adherence to U.S. export control regulations including ITAR and EAR, requiring proper handling, storage, and dissemination of controlled technical data throughout the supply chain. All parties involved must implement compliant procedures for technical data management and ensure that any hazardous materials associated with the bumper are properly labeled and documented in accordance with applicable federal standards. The action is structured as a subcontract under NAICS code 332722 and is managed by the Department of Defense through the LAND SUPPLY CHAIN office, with performance required at New Cumberland, Pennsylvania, 17070-5002. Bidders must submit responses by August 17, 2026, and must be prepared to demonstrate full regulatory compliance and capability to handle sensitive defense-related components under stringent security protocols.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-917N

This contract, identified by solicitation number SPE7L1-26-T-917N, is for the procurement of 346 units of a clamp and loop component with NSN 5340-01-030-4980, priced at $346.00 per unit, totaling $119,716.00. Delivery is required FOB origin within 119 days, with the original delivery date set for November 25, 2026, and a needed ship date of December 15, 2026. All supplies must comply with stringent technical and quality requirements drawn from the DLA Master List of Technical and Quality Requirements, with specific mandates including MIL-STD-130N for identification marking, MIL-STD-1916 or ASQ H1331 for zero-defect sampling, and strict adherence to packaging standards per MIL-STD-129 and RP001. The use of Class I ozone depleting chemicals is strictly prohibited, and any substitution requires prior approval. Compliance documentation such as the Certificate of Quality Compliance is mandatory, and the Certificate of Conformance procedures under FAR 52.246-15 are authorized unless overridden by a Quality Assurance Letter of Instruction. The item must be shipped to the designated delivery point at DLA District San Joaquin, 25600 S Chrisman Road, Rec Whse 57, Tracy, CA 95304-5000, with packaging requirements depending on hazardous material status per FED-STD-313: non-hazardous items follow ASTM D3951 unless superseded by DLA requirements, while hazardous items must comply with TQ requirement IP025. Palletization must conform to DLA packaging guidelines, and all packaging and labeling must meet MIL-STD-129 with correct Unit of Issue and Quantity per Unit Pack as specified. The contract mandates full and open competition with no set-asides, and all technical data and revisions referenced, including TDP Rev A Gen 1 based on drawing NR 19207, take precedence. Transportation directives are governed by DLAD Proc Notes C19 and C20, and the official point of contact for procurement inquiries is Isabelle Szulewski, reachable via email and phone listed in the contract.

Hardware Manufacturing

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-916W

The contract is for the procurement of 600 linear feet of gasket material identified by NSN 5330-01-557-0920 and part numbers X-113BT and TRIMLIK-X-113BT, with a 10% allowable increase in quantity for a maximum delivery of 660 feet. The unit of issue is the foot and the contract总价 is $600 based on an implied unit price of $1.00 per foot. Delivery is required within five days after award to the specified location in Albany, GA, under FOB Origin terms, with inspection and acceptance occurring at the destination. Packaging must strictly comply with MIL-STD-2073-1E and DLA’s RP001 packaging requirements, including cold/dry preservation methods, and all items must be marked per MIL-STD-129 with no special marking required. The item is not classified as hazardous, but compliance with hazardous material protocols under IP025 and OSHA’s Hazard Communication Standard (29 CFR 1910.1200) is mandatory if applicable, along with submission of Safety Data Sheets prior to award. Radioactive material thresholds are defined, and notification is required if any component exceeds specified activity levels. The contractor must use WAWF for invoicing and must have a valid UEI and CAGE code, while also certifying compliance with regulations regarding covered defense telecommunications equipment and subcontractor disclosures. The award mechanism is likely Low Price Technically Acceptable, with proposals submitted electronically through DIBBS before the August 17, 2026 deadline. Special clauses cover whistleblower rights, former DoD official compensation restrictions, third-party data limitations, and government work product control, indicating a high level of regulatory oversight. The contract does not specify a contract type but involves a single CLIN with no options or indefinite-delivery elements, and no key personnel or security clearance requirements are identified.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

BRACKET, MOUNTING

Solicitation # SPE7L1-26-Q-1458

The item specified is a mounting bracket with NSN/Part Number 5340-01-670-3301, with a quantity of one unit and a delivery requirement of 159 days after order. Technical and quality requirements referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. Packaging must comply with DLA packaging standards, and non-accepted supplies must be stripped of all government identification prior to return. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior authorization from the Department of State or Department of Commerce, including foreign national employees and foreign subsidiaries of U.S. firms. Access to this controlled data is restricted only to DLA contractors with an approved US/Canada Joint Certification Program certification, who have completed mandatory DOD export control training and the DLA Export-Controlled Technical Data Questionnaire, and have received formal approval from the DLA controlling authority. The solicitation number is SPE7L1-26-Q-1458, posted on August 5, 2026, with responses due by August 12, 2026, and the North American Industry Classification System code is 332510. Performance is required at Oak Harbor, WA 98278-5200, and inquiries should be directed to Vittorio Tambaro at the provided contact details.

Hardware Manufacturing

POSTED

about 8 hours ago

DEADLINE