Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

HVAC System Repair and Replacement

Active

State & Local

Response Deadline09/03/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the repair or replacement of HVAC systems in two skyway bridges, encompassing full diagnostic assessments, replacement of faulty or outdated components, systematic testing of installed equipment, and verification of compliance with applicable standards. Work must ensure reliable climate control and safety within the bridges, with all tasks performed to meet operational and regulatory requirements. The project demands technical expertise in commercial HVAC systems and adherence to strict performance and safety benchmarks. This is a subcontract opportunity issued by the State of North Carolina’s Construction Office, with a posted date of July 31, 2026, and a response deadline of September 3, 2026. It falls under NAICS code 238220, which classifies it within the HVAC contracting sector. The place of performance is within North Carolina, though specific locations are not detailed. Bidders must prepare submissions before the deadline to be considered for award, with no set-aside preferences indicated. All work is expected to be completed in accordance with state-mandated construction and maintenance protocols.

General Info

Repair or replace HVAC systems in two North Carolina skyway bridges by September 3, 2026, meeting state safety and performance standards.

Agency

North Carolina → State of NC - Construction OfficeView Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

NC, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 31

subcontract

Response DeadlineSep 3

Submission deadline

Response Deadline

09/03/2026, 08:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNorth Carolina → State of NC - Construction Office

ContactsNo contacts available

OfficeN/A

Organization / Agency

North Carolina → State of NC - Construction Office

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Repair or replace HVAC systems in two skyway bridges, including diagnostics, component replacement, system testing, and compliance verification.

Similar Contracts

Same NAICS industry code

Plumbing and Piping Systems InstallationThe contract titled Plumbing and Piping Systems Installation is a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA, with a NAICS code of 238220 covering plumbing, heating, and air-conditioning contractors. It pertains to the installation of potable water, waste drainage, and gas piping systems within commercial or institutional buildings, requiring specialized expertise in mechanical systems compliance and building code adherence. The solicitation was posted on August 1, 2026, with a response deadline of August 24, 2026, and is managed by the ASC Commodities Division under the Department of Defense, though specific performance location and point of contact details are not provided. Contractors must submit proposals before the deadline to be considered for award under this set-aside, ensuring eligibility and compliance with small business certification requirements.

ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

HVAC System InstallationThe contract titled HVAC System Installation outlines the scope for installing comprehensive heating, ventilation, and air conditioning systems, including all associated ductwork and control systems. This is a subcontract opportunity under NAICS code 238220, issued by Technical Services through its Florida office, with a response deadline of September 15, 2026. The work is expected to be performed in an unspecified location within Florida, and the contract does not designate a specific set-aside category or target organization type. The project portal link is provided for further access, though no point of contact details are included. All deliverables must meet the technical specifications for full HVAC system integration, ensuring operational efficiency and compliance with industry standards.

Technical Services

POSTED

about 17 hours ago

DEADLINE

in about 1 month

Plumbing and Piping Systems InstallationThe contract titled Plumbing and Piping Systems Installation requires the installation of comprehensive plumbing systems including water supply, drainage, and gas piping. It is structured as a subcontract under NAICS code 238220 and was posted on August 1, 2026, with a response deadline of September 15, 2026, at 6:00 PM. The work is being procured by Technical Services through its Florida office, though specific city or zip details for the place of performance or agency address are not provided. The solicitation does not indicate a set-aside type or designated organization type, and there is no point of contact information listed. Interested parties must submit proposals through the provided procurement portal link before the stated deadline to be considered for award.

Technical Services

POSTED

about 17 hours ago

DEADLINE

in about 1 month

J045--1300T Chiller Repairs - NWI (VA-26-00083402)

Solicitation # 36C26326Q0997

The U.S. Department of Veterans Affairs is conducting market research to identify small business sources capable of performing Trane 1300T chiller repair services at the Omaha VA Medical Center in Omaha, Nebraska. This notice, issued under FAR Part 10, is strictly for planning and informational purposes and does not constitute a solicitation or a commitment to award a contract. The work involves inspecting and evaluating the existing chiller drive system, replacing OEM components such as transistors, contactors, and motor starter assemblies, integrating new parts with existing control and communication systems, and conducting thorough testing, commissioning, and documentation. Work may require evening or weekend hours to minimize disruption to facility operations and patient care. Respondents must demonstrate they are certified Trane OEM service providers and provide a capability statement that includes their business name, address, UEI number, point of contact details, and confirmation of SDVOSB or VOSB status, which will be verified through VetBiz. The response deadline is August 7, 2026, at 10:00 a.m. Central Standard Time, and submissions must be sent exclusively by email to the designated contracting officer. Only vendors with experience in HVAC system controls and repairs, particularly with Trane equipment, are encouraged to respond, and all costs associated with submitting information are the sole responsibility of the respondent. The North American Industry Classification System code is 238220, and the Product Service Code is J041.

Network Contract Office 23 (36C263)

POSTED

about 17 hours ago

DEADLINE

Mechanical, Plumbing, and HVACThe contract entails the full installation of mechanical, plumbing, and HVAC systems for a project under the Economic Development agency in Connecticut, classified under NAICS code 238220 for plumbing, heating, and air-conditioning contractors. Work includes all aspects of plumbing and piping, water supply and drainage networks, as well as comprehensive HVAC installation encompassing ductwork, equipment, controls, and associated components. Required tasks involve pressure testing of all systems to ensure integrity and safety, followed by full commissioning to verify operational performance according to design specifications. The contract is structured as a subcontract with a response deadline of August 25, 2026, and was posted on August 1, 2026. The place of performance and precise location details are not specified, and there is no designated point of contact listed.

Economic Development

POSTED

about 18 hours ago

DEADLINE

Propane Equipment and Safety Compliance ServicesThe contract seeks providers to deliver comprehensive safety inspections, routine equipment maintenance, and compliance verification services for propane systems at delivery sites, strictly aligned with the National Fire Protection Association Standard 58. This subcontract under the Texas Health and Human Services Commission requires consistent adherence to federal safety guidelines to ensure operational integrity and regulatory compliance across all serviced locations. Work must be performed in accordance with technical specifications governing propane storage, handling, and distribution to mitigate risks and maintain public safety standards. The solicitation was posted on August 1, 2026, with responses due by August 14, 2026, at 4:30 PM. The work falls under NAICS code 238220 for specialized trade contractors, indicating a focus on installation and maintenance services rather than manufacturing or supply. While the place of performance and point of contact details are not specified, the contract is accessible through the Texas SmartBuy portal, and all bidders are expected to understand that services will be delivered at various propane delivery sites within Texas. The contract does not include set-aside provisions, making it open to all qualified subcontractors regardless of size or ownership structure.

Health and Human Services Commission

POSTED

DEADLINE

HVAC System InstallationThe contract titled HVAC System Installation is a subcontract under NAICS code 238220, issued by the California Department of Consumer Affairs, requiring the installation of complete heating, ventilation, and air conditioning systems including all associated ductwork, equipment units, and control systems. The solicitation was posted on July 31, 2026, with a response deadline set for September 1, 2026, and is intended for execution within California, though the specific location of performance is not detailed. The contract does not specify a set-aside type or indicate any particular organizational preferences, and no point of contact information is provided. Interested parties must submit proposals through the designated portal at the provided URL prior to the deadline to be considered for award.

California Department of Consumer Affairs

POSTED

DEADLINE

Plumbing and Piping Systems InstallationThe contract titled Plumbing and Piping Systems Installation pertains to the comprehensive installation of plumbing systems for commercial buildings, encompassing water supply, drainage, and venting infrastructure. It is classified as a subcontract under NAICS code 238220 and was posted on July 31, 2026, with a response deadline of September 1, 2026. The solicitation is issued by the California Department of Consumer Affairs under the broader agency designation of California, though specific office or performance location details are not provided. The contract does not specify a set-aside type or point of contact information, and the official portal for submission and further details is accessible via the provided URL.

California Department of Consumer Affairs

POSTED

DEADLINE

On-Demand Labor & Travel ServicesThe contract seeks qualified subcontractors to provide skilled technicians for on-demand repair and maintenance services at the ECL site under a time-and-materials basis, with full reimbursement for labor and associated travel expenses. Work will involve responding to facility needs as they arise, requiring technicians to be available for deployment with appropriate certifications and experience in industrial maintenance and repair. The solicitation is open for responses until August 31, 2026, and is classified under NAICS code 238220 for electrical and other construction installations. The award will be issued by the California Department of Toxic Substances Control, and performance is expected to occur at the ECL facility location, though specific site details are not provided. Bidders must be prepared to meet operational demands without fixed schedules, and reimbursement claims will be processed based on verified time logs and approved travel costs.

California Department Toxic Substances Control

POSTED

DEADLINE

Laboratory Piping System Maintenance & RefurbishmentThe contract involves the maintenance, repair, and potential upgrades of laboratory-grade gas piping systems, requiring specialized work in clean and controlled environments. Tasks include welding, sealing, corrosion control, and compliance testing to ensure system integrity and safety standards are met. The work must adhere to stringent environmental and operational requirements typical of sensitive laboratory settings where contamination control is critical. This subcontract, classified under NAICS code 238220, is posted by the California Department of Toxic Substances Control with a response deadline of August 31, 2026. The contract is open for bidding without a set-aside designation, and performance will occur across unspecified locations under the jurisdiction of the California agency. Interested parties must respond by the specified deadline to be considered for award, with no additional details provided regarding point of contact or precise delivery locations.

California Department Toxic Substances Control

POSTED

DEADLINE

On-Demand Microbulk Tank System Repair & MaintenanceThe contract calls for on-demand repair, maintenance, and troubleshooting services for microbulk tank systems used in laboratory settings, covering critical tasks such as leak detection, pressure regulation, and valve replacement to ensure operational safety and compliance. Services must be responsive to both emergency situations and scheduled routine maintenance, with an emphasis on minimizing downtime and maintaining system integrity in sensitive scientific environments. This subcontract, posted by the California Department of Toxic Substances Control under NAICS code 238220, is open for responses until August 31, 2026, with no specified set-aside or organizational restrictions. The work is to be performed across laboratory facilities in California, though exact locations are not detailed in the posting. Contractors must be equipped to handle high-hazard gas systems and demonstrate expertise in industrial gas storage infrastructure, with an obligation to comply with all applicable safety and environmental standards governing toxic substances handling.

California Department Toxic Substances Control

POSTED

DEADLINE

Emergency & On-Call Fire Alarm Repair ServicesThe contract seeks qualified contractors to provide emergency and after-hours repair services for fire alarm system failures across all California Department of Corrections & Rehabilitation facilities. Services must be available 24 hours a day, seven days a week, to ensure immediate response to critical system outages that occur outside standard business hours. The contractor is expected to maintain rapid response capabilities to restore functionality and ensure compliance with life safety codes throughout CDCR institutions. Work includes troubleshooting, diagnosing, and repairing fire alarm components such as control panels, detectors, notification appliances, and wiring, with strict adherence to state and federal fire safety regulations. The contract is classified under NAICS code 238220 for electrical wiring and installation and is structured as a subcontract. The solicitation was posted on July 31, 2026, with a deadline for responses set for September 4, 2026. Performance is expected to span all CDCR facilities statewide, though specific locations are not detailed. No set-aside provisions or designated small business preferences are indicated. All work must be conducted with minimal disruption to institutional operations and with full awareness of heightened security protocols inherent in correctional environments. Contractors must demonstrate proven experience in fire alarm systems, on-call service reliability, and familiarity with high-risk facility environments.

California Department of Corrections & Rehabilitation

POSTED

DEADLINE

in about 1 month

More opportunities from North Carolina → State of NC - Construction Office

Same awarding agency

Specialty Equipment and Material SupplyThe State of North Carolina through its Construction Office is seeking qualified subcontractors to supply specialized HVAC equipment and materials for system repairs, including units, compressors, coils, thermostats, ductwork, insulation, and refrigerants. This subcontract opportunity is classified under NAICS code 423730 and is open for responses until September 3, 2026, with proposals due by 8:00 PM Eastern Time. The materials must meet technical specifications required for repair and replacement applications across state-owned facilities, though specific locations for performance are not detailed. The solicitation is not set aside for any particular demographic or small business category, and all interested parties must ensure compliance with state procurement standards. Further details and submission instructions are available through the official state procurement portal.

Warm Air Heating and Air-Conditioning Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

in about 1 month

Testing, Adjusting, and Balancing (TAB) ServicesThe contract seeks specialized Testing, Adjusting, and Balancing (TAB) services to ensure HVAC systems meet code compliance and operate at full functionality after repairs. This includes post-repair testing, airflow balancing, comprehensive system diagnostics, and performance verification to confirm that all components function as designed and meet required standards. The work is critical for validating system efficiency, indoor air quality, and regulatory adherence across state-owned facilities. This subcontract, posted by the State of North Carolina’s Construction Office under NAICS code 541330, is open for responses until September 3, 2026. No specific set-aside provisions or organizational type restrictions are indicated. The place of performance and point of contact details are unspecified, but the work will be conducted across various locations within North Carolina under the oversight of the state’s construction authority. Interested parties must submit proposals through the official portal prior to the deadline to be considered for award.

Engineering Services

POSTED

DEADLINE

in about 1 month

Mechanical Insulation and Ductwork ServicesThe contract titled Mechanical Insulation and Ductwork Services seeks a subcontractor to supply and install ductwork, insulate piping, and seal air distribution systems for a public construction project under the State of North Carolina's Construction Office. The work will be performed in an unspecified location within the state, with all tasks required to meet applicable mechanical and energy efficiency standards. The solicitation was posted on July 31, 2026, and responses must be submitted by September 3, 2026, with no set-aside provisions specified. The North American Industry Classification System code 238290 applies, indicating the work falls under other building equipment contractors. Interested parties should access the full solicitation details via the provided state portal for technical specifications, performance requirements, and compliance guidelines before submitting a bid.

Other Building Equipment Contractors

POSTED

DEADLINE

in about 1 month

Plumbing and Piping Services for HVAC Hydronic SystemsThe contract pertains to the installation or repair of hydronic piping, condensate drains, and refrigerant lines essential for HVAC system operation, categorized under NAICS code 238240 for plumbing and heating services. It is structured as a subcontract opportunity issued by the State of North Carolina’s Construction Office, with a posted date of July 31, 2026, and a response deadline of September 3, 2026. While no specific location or set-aside designation is provided, the work is expected to support state-level infrastructure projects requiring compliant and reliable hydronic and refrigerant system integration. All bids must be submitted through the official state portal by the stated deadline to be considered.

POSTED

DEADLINE

in about 1 month

Electrical Systems Support for HVAC IntegrationThe contract involves the electrical wiring, controls, and power integration necessary for the installation and operation of HVAC units, encompassing the full scope of thermostat installation, control panel configuration, and circuit connections to ensure seamless electrical functionality. This work requires precise coordination between electrical systems and HVAC equipment to meet performance, safety, and code compliance standards across all installations. Issued as a subcontract by the State of North Carolina’s Construction Office under NAICS code 238210, the solicitation was posted on July 31, 2026, with a response deadline of September 3, 2026. The work is to be performed across unspecified locations within the state, and interested parties must submit proposals prior to the listed deadline through the provided state portal. There is no set-aside designation, and the contract does not specify additional organizational or geographic restrictions beyond general state-wide performance requirements.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

in about 1 month

North Carolina Department of Administration

Solicitation # SCO-25-30410-01A

The North Carolina Department of Administration, through its Construction Office, has issued a solicitation for the HVAC system installation and related services at the Nature Research Center's Skyway Bridge, with the solicitation number SCO-25-30410-01A. The contract is open to qualified contractors seeking to provide comprehensive heating, ventilation, and air conditioning solutions for this state facility located in North Carolina, with all performance obligations to be fulfilled within the state. The solicitation was posted on July 31, 2026, and responses are due by September 3, 2026, at 8:00 PM Eastern Time. There is no set-aside designation specified, meaning the opportunity is open to all eligible bidders regardless of business size or ownership characteristics. Kadisha Molyneaux is listed as the primary point of contact for inquiries related to the solicitation, and the contract falls under the jurisdiction of the State of North Carolina's procurement process. While no NAICS code or specific set-aside details are provided, the work will require adherence to state construction standards and facility specifications for a high-profile public building. Interested parties must submit their proposals through the official state procurement portal prior to the deadline, and detailed technical and compliance requirements can be accessed via the provided UI link. The project is part of the state's ongoing infrastructure and facility modernization efforts to ensure optimal environmental conditions within its public research facilities.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

in about 1 month

Project Management and Prime Contract OversightThe contract titled Project Management and Prime Contract Oversight requires comprehensive coordination of all project activities including permitting, scheduling, and subcontractor management under the authority of North Carolina General Statutes Chapter 87 Section 1. The successful bidder will serve as the primary point of responsibility for ensuring all phases of the construction project are executed in full compliance with state regulations and contractual obligations, maintaining accountability for timelines, quality control, and regulatory adherence. This subcontract is tied to a North Carolina state construction initiative and demands strict alignment with NC GS 87-1 standards governing licensed contractors and project oversight. The solicitation was posted on July 28, 2026, with a response deadline of August 27, 2026, and is classified under NAICS code 236220 for commercial and institutional building construction. While specific location details for performance are not provided, the work is being managed by the State of North Carolina’s Construction Office and will require adherence to all state-mandated protocols for public infrastructure projects. The contract does not specify a set-aside classification, indicating open competition for qualified contractors capable of managing complex, compliance-driven construction environments. All parties must be prepared to demonstrate proven experience in prime contract oversight and a documented history of successfully navigating North Carolina’s regulatory framework for construction projects.

Commercial and Institutional Building Construction

POSTED

DEADLINE

Ready-Mix Concrete SupplyThe contract is for the supply of ready-mix concrete specifically intended for equipment pads and foundations under a subcontract arrangement with the State of NC Construction Office. The solicitation was posted on July 28, 2026, with a response deadline of August 27, 2026, at 7:00 PM. The North American Industry Classification System code 327320 identifies the work as related to concrete product manufacturing. Performance location details are not specified, and no set-aside provisions or organizational type classifications are provided. The contract is accessible through the official state procurement portal, and no point of contact information has been included in the public listing.

Ready-Mix Concrete Manufacturing

POSTED

DEADLINE

Electrical Conduit and InterconnectionThe contract requires the installation of underground conduits, pulling of wiring, and the connection of generators and switchgear to the main power grid and associated control systems, ensuring full integration with existing electrical infrastructure. Work must comply with all relevant codes and standards for safety, reliability, and long-term operational efficiency, with performance expected at a location within North Carolina, though specific site details are not provided. The subcontract is under the NAICS code 238210 for electrical contracting and is managed by the State of North Carolina’s Construction Office. The solicitation was posted on July 28, 2026, with a response deadline of August 27, 2026, at 7:00 PM Eastern Time. No set-aside status is designated, and there is no specific point of contact listed. Interested parties must submit proposals through the official state portal at the provided link, and all work must be completed in accordance with state construction and electrical regulations. The scope demands skilled labor for underground work, precise electrical terminations, and coordination with utility and control systems, requiring proven experience in similar large-scale power infrastructure projects.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Site Work and GradingThe contract titled Site Work and Grading requires comprehensive site preparation activities including clearing, grading, and site conditioning to facilitate the proper placement of equipment. Work must encompass erosion control measures, installation of drainage systems, and construction of access roads to ensure safe and efficient operations. The project is solicited as a subcontract under NAICS code 237990 and is administered by the State of NC - Construction Office, with performance expected within North Carolina. Responses are due by August 27, 2026, with the solicitation posted on July 28, 2026, and details available through the state’s procurement portal. There is no designated set aside or organizational type specified for this opportunity.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

Equipment Foundations and Concrete WorkThe contract entails the design and construction of reinforced concrete foundations specifically for generators, switchgear, and E-House installations, all in strict accordance with detailed engineering specifications. This work is part of a subcontract under the State of NC Construction Office and is classified under NAICS code 238110, which pertains to foundation and building exterior contractors. The scope requires precise execution to meet structural and safety standards for heavy electrical equipment, with all materials and methods adhering to approved technical guidelines. The solicitation is open for responses through August 27, 2026, and performance will occur within North Carolina, though specific location details are not provided. The project is managed by the North Carolina state agency, and potential bidders must navigate the online portal linked for full submission requirements and documentation.

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE

Switchgear and E-House Electrical InstallationThe contract involves the supply, assembly, and installation of switchgear control systems within an E-House structure, with full integration into existing generator systems and the broader site power distribution network. This effort requires technical expertise in electrical systems design, precise on-site assembly, and seamless coordination with power generation assets to ensure operational reliability and compliance with industry standards. All work must be completed within the designated E-House enclosure, which serves as the central housing for critical electrical controls. This subcontract is issued by the State of North Carolina’s Construction Office under NAICS code 238210, which classifies electrical contracting services. The solicitation was posted on July 28, 2026, with a firm response deadline of August 27, 2026. Performance will occur at an unspecified location within North Carolina, and while details such as the exact site, point of contact, or set-aside status are not provided, the scope demands experienced contractors capable of managing complex electrical integrations in a controlled industrial environment. Bidders are expected to demonstrate proven capability in similar installations and adherence to state-level construction and safety protocols.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE