This Government Contract opportunity from California was posted on September 18, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

HVAC Testing and Air Balancing Services

Closed

State & Local

Submission Closed10/12/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541330

New

GLCA 318882 - Provide Lake Access to Bullfrog Area

Solicitation # glca-318882-provide-lake-access-bullfrog-area

The GLCA 318882 project involves providing lake access to the Bullfrog Area in Utah. The scope of work requires the design of a 150-foot-wide concrete launch ramp with a 10.5 percent grade servicing water surface elevations between 3700 and 3450. Additionally, the contractor must design a 16-acre asphalt parking area and a two-lane asphalt access road connecting the parking area to US 276. This solicitation is issued by WW Clyde and Co and is set aside for various small business categories, including SDVOSB, WOSB, HUBZone, and SDB, with a specific Indian Small Business Economic Enterprise requirement. Interested parties must submit their responses by November 12, 2026. The project falls under NAICS code 541330 for engineering services.

POSTED

DEADLINE

Business Impact Analysis and Update Disaster Recovery Plan Services – Inland Empire Utilities Agency

Solicitation # business-impact-analysis-update-disaster-recovery-plan-services-inland-empire-utilities-agency

Aanko Technologies Inc. is soliciting certified Disadvantaged Business Enterprise and Small Business Enterprise sub-consultants and suppliers to provide specialized professional services for the Inland Empire Utilities Agency in San Bernardino and Riverside Counties, California. The scope of work focuses on emergency management, business continuity planning, technical writing, data collection, and the updating of IT and disaster recovery plans. Eligible firms should operate under NAICS codes related to administrative management, engineering services, computer systems design, or public relations and technical documentation. Interested parties must submit their responses by November 17, 2026. Primary coordination for this opportunity is managed by Liz Jordan-Wettstein.

Aanko Technologies Inc.

POSTED

DEADLINE

Cooper City Stormwater Master Plan (H1470 | 4673-305-P14)

Solicitation # RFQ2026-2

The City of Cooper City is soliciting proposals under RFQ2026-2 for the development of a comprehensive Stormwater Master Plan (SWMP) covering approximately 8.5 square miles. Funded through the FEMA Hazard Mitigation Grant Program (HMGP) Watershed Planning Program, the project aims to identify flood-prone areas, assess water-quality practices, and improve the community's National Flood Insurance Program Community Rating System score to increase overall flood resiliency. The scope of work is divided into two primary tasks: the creation of a preliminary SWMP based on initial flood modeling and the finalization of the SWMP for adoption into the Local Mitigation Strategy. The total estimated value for these tasks is 281,000 dollars, with a period of performance extending from the date of execution through May 31, 2028. Proposals must be submitted via the OpenGov Procurement Portal by November 30, 2026. The selection process involves a two-tier evaluation based on a 100-point scale, focusing heavily on methodology and work plans, with the possibility of oral presentations for shortlisted firms. Awarded consultants must comply with various federal and state regulations, including the Davis-Bacon Act for prevailing wages, the Americans with Disabilities Act, and Florida Statutes regarding scrutinized companies. Key deliverables include a preliminary and final SWMP, along with supporting grant documentation. The contract allows for termination for convenience by the City with fourteen calendar days' written notice and requires policies to be primary and non-contributory.

POSTED

DEADLINE

Public Safety Training Center Roadway and Levee

Solicitation # 2026-GEN-00109

The Hamilton County Board of Commissioners is seeking Statements of Qualifications from Architectural and Engineering firms for the Public Safety Training Center Roadway and Levee Repair Project located in Noblesville, Indiana. The selected consultant will provide professional engineering, environmental, and technical design services, including structural analyses, hydraulic and hydrologic modeling, geotechnical investigations, and the preparation of a complete Plans, Specifications, and Estimates package. The project may be eligible for federal-aid reimbursement through the FEMA Public Assistance Program, and all work must comply with 2 CFR section 200.320(b)(2)(iv) and FEMA requirements. Selection is based on a qualifications-based method where price is not a factor in the evaluation. Firms will be ranked based on their qualifications and availability, past performance on related projects, project approach and timeline, and references. The submission deadline is November 9, 2026, via the OpenGov portal. The contract includes strict adherence to federal regulations, including the Davis-Bacon Act for prevailing wages, the Anti-Kickback Act, and Executive Order 11246 regarding nondiscrimination. Required submission documents include a cover letter, non-lobbying and non-collusion certifications, debarment and suspension certifications, and an E-Verify affidavit.

Buildings and Grounds

POSTED

DEADLINE

BSL-3 Ventilation and HEPA Filter CertificationThis subcontract involves the inspection, testing, and certification of BSL-3 ventilation systems and HEPA filters for prime contractors working on California Department of Public Health facility projects. The scope of work includes HEPA filter leak testing according to IEST-RP-CC034, ventilation performance verification per ANSI Z9.14, and smoke visualization to analyze airflow patterns. All activities must strictly comply with the CDC/NIH BMBL 6th Edition guidelines, and the contractor is required to utilize aerosol photometers and HEPA leak testers to deliver final certification and APV reports. The opportunity is listed under NAICS code 541330 and was posted on November 4, 2026, with a response deadline of December 1, 2026. Interested parties can find further details through the Cal eProcure portal under event 4265/26-10300.

California Department of Public Health

POSTED

DEADLINE

RFSOQ for Electrical Support

Solicitation # 26-196

The Tarrant Regional Water District (TRWD) is soliciting Statements of Qualifications (SOQs) for an Indefinite Delivery/Indefinite Quantity (IDIQ) contract to provide electrical engineering support, owner's agent services, and electrical equipment acceptance testing. The scope of work is divided into three categories: Category A focuses on electrical engineering support including design reviews and services for Capital Improvement Projects; Category B covers owner's agent services, energy audits, and the development of Energy Conservation Measures; and Category C involves acceptance testing for medium voltage cables, transformers, switchgear, VFDs, and MCCs. These services will support numerous projects across Texas, including various pump stations, pipeline projects, and facility improvements. Selection is based on Qualifications-Based Selection Criteria, with evaluations weighted toward the experience and qualifications of proposed personnel (50%), the firm's prior experience and past performance (30%), and staff commitment and scheduling (20%). The process may include interviews with the top three ranked firms before negotiating a comprehensive scope and fee proposal with the highest-ranked respondent. Interested firms must submit their electronic responses via the OpenGov portal by November 19, 2026. Submittals must strictly adhere to formatting guidelines and must not include any pricing or fee estimates. Required documentation includes a Conflict of Interest Questionnaire and confirmation of professional liability insurance.

Infrastructure Engineering

POSTED

DEADLINE

Request for Proposals for Professional Consultant Services Required for the Citywide Flow Monitoring Program Implementation - Phase 2

Solicitation # C11-22-26

The City of Hamilton has issued solicitation C11-22-26 for professional consultant services to implement Phase 2 of its Citywide Flow Monitoring Program. The selected consultant will be responsible for providing all labor, materials, supervision, and equipment necessary to install and eventually remove flow monitoring equipment at ninety sites within the city's sanitary and combined servicing areas. Key requirements include managing data quality for all data sets, providing flow monitoring deliverables, and conducting monthly site inspection and maintenance visits to ensure equipment functionality. The consultant must also provide an installation report featuring documentation and photographs for each location and restore all sites to their pre-installation condition upon demobilization. The project requires the submission of a project management plan, a project-specific health and safety plan, and traffic control plans. Mobilization and installation must begin within 30 days of the project award. Monthly invoices are to be submitted to the City's Project Manager, with Stephanie Spada serving as the Procurement Specialist. Proposals must be submitted electronically via the City's Bidding System by December 3, 2026, at 3:00 PM Hamilton time, as hardcopy submissions will not be accepted. All inquiries must be submitted through the bidding portal no later than three business days before the closing deadline.

POSTED

DEADLINE

Snapfinger Advanced Wastewater Treatment Facility Expansion - Phase 3E - Design and Engineering Services During Construction

Solicitation # 2026-135-RFP

The County of DeKalb, Georgia, is soliciting proposals for design and engineering services for Phase 3E of the Snapfinger Advanced Wastewater Treatment Facility expansion. This project is part of a 4.27 billion dollar Capital Improvement Projects program and specifically involves adding a primary clarification unit process and replacing dewatering centrifuges. Using a design-bid-build delivery method, the selected engineer will manage five primary tasks, including a 24-month design phase with milestones at 30, 60, 90, and 100 percent completion, a 15-month bid phase, and post-construction services. The contract term is three years from the execution date. Qualified firms must be licensed in Georgia and demonstrate a track record of completing at least three projects in the last ten years at wastewater facilities with a capacity of 15 MGD or greater and a value of 25 million dollars or more. Proposals must be submitted electronically via the County's eProcurement Portal by 3:00 p.m. ET on January 20, 2027. Submissions are divided into a technical proposal, limited to 50 pages, and a separate not-to-exceed cost proposal. Evaluation is based on cost, technical qualifications, and LSBE participation, with the final award decided by the DeKalb County Board of Commissioners. The contract is subject to Davis-Bacon prevailing wage requirements and requires a one-year warranty on all work and equipment.

Purchasing & Contracting

POSTED

DEADLINE

On-Call Structural and Seismic/Disaster Engineering Services

Solicitation # FAS 2026-037

The City of Seattle Finance and Administrative Services Capital Development division is seeking to establish two on-call contracts for professional structural and seismic/disaster engineering services under solicitation FAS 2026-037. The selected consultants will provide technical expertise on an as-needed basis for small to medium projects throughout the planning, design, procurement, and construction phases, utilizing delivery methods such as Design-Bid-Build, Job Order Contracting, and the Small Works Roster. The scope of work includes structural engineering studies, seismic evaluations, confidence testing, fall protection design, and the preparation of construction documents stamped by a licensed engineer. All deliverables must adhere to specific CAD standards, including software compatibility with AutoCAD 2025.1.3 and AIA/US National CAD Standard V5. Eligible firms must be licensed to practice in Washington State and the City of Seattle, demonstrate experience with current code compliance, and provide three relevant projects completed within the last seven years. The contract features an initial one-year term with up to four optional one-year renewals, for a maximum duration of five years. Evaluation of proposals is based on relevant technical experience (40 percent), approach and methodology (30 percent), and an inclusion plan (15 percent) focusing on women and minority-owned businesses. Responses are due by December 2, 2026, via the OpenGov portal, with a target contract execution date of December 15, 2026. Consultants are required to maintain Commercial General Liability insurance and comply with various local and federal regulations, including ADA and City of Seattle labor ordinances.

Finance and Administrative Services

POSTED

DEADLINE

Healthcare Architectural & Engineering Design

Infrastructure BC Inc.

POSTED

DEADLINE

On-Call Engineering, Architecture and Construction Services for Airport Development

Solicitation # QBS(b)RFP-2600047

The City of Lawrence is soliciting proposals for an Indefinite Delivery Indefinite Quantity IDIQ Master Contract to provide on-call engineering, architecture, and construction services for the Lawrence Regional Airport. The scope of work encompasses a wide range of airport development projects, including airfield improvements such as runway and taxiway extensions and rehabilitation, the design and construction of an ARFF station, aircraft parking and hangar development, and landside roadway and parking improvements. Additionally, the selected consultant will be responsible for grant administration services for projects funded through the FAA Airport Improvement Program AIP and KDOT Kansas Airport Improvement Program KAIP. This solicitation utilizes a qualifications-based selection process where fee proposals and pricing must be submitted separately from technical qualifications to avoid disqualification. Proposals are divided into blind and non-blind volumes, with the blind volume requiring the removal of all identifying company and personnel information. Evaluation is based on overall best value, with significant weight placed on the project team and grant administration experience. The submission deadline is November 10, 2026, via the OpenGov e-Procurement Portal. Awarded vendors must comply with federal and state regulations, including Build America Buy America, ADA standards, and Davis-Bacon wage requirements.

Municipal Services Operations

POSTED

DEADLINE

Solar PV Testing and Commissioning

Waverley Borough Council

POSTED

about 6 hours ago

DEADLINE

in 26 days

AI Contract Overview

The City of Buena Park is seeking a subcontractor for HVAC Testing and Air Balancing Services to perform technical verification of airflow and system performance for prime contractors on city facility projects. The scope of work includes conducting air balancing for newly installed systems, testing airflow at vents, and verifying CFM for relocated air handlers and adjusted vents using specialized equipment such as anemometers, flow hoods, and manometers. Qualified providers must hold NEBB or AABC certification and are required to deliver a formal Testing and Air Balancing report upon completion. This opportunity is listed under NAICS code 541330, with a response deadline of October 12, 2026, for performance within Buena Park, California.

General Info

Buena Park seeks NEBB/AABC certified HVAC testing and air balancing subcontractors by October 2026.

Agency

California → CITY OF BUENA PARK

NAICS

541330 - Engineering Services

Place of Performance

Buena Park, CA, 90621, USA

Set-Aside

NONE

Documents

This scope was carved out of 2026-22.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

HVAC Units Upgrade Project - City Hall & Pd Building

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedSep 18

subcontract

Response DeadlineOct 12

Deadline has passed

Submission Closed

10/12/2026, 09:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyCalifornia → CITY OF BUENA PARK

ContactsNo contacts available

OfficeN/A

Organization / AgencyCalifornia → CITY OF BUENA PARK

Office AddressN/A

ContactsNo contact information available

Full Description

Performs technical verification of airflow and system performance for prime contractors on City of Buena Park facility projects. Conducts air balancing for newly installed systems, tests airflow at vents, and verifies CFM for relocated air handlers and adjusted vents using anemometers, flow hoods, and manometers. NEBB or AABC certification required. Delivers a formal Testing and Air Balancing (TAB) report.