Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Identification Flag Fabrication (Red Cross Field Hospital)

Active

Federal

Response Deadline11/12/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract with C AND T SUPPLY CHAIN for the Department of Defense involves the fabrication of identification flags for Red Cross Field Hospitals. The contractor is required to cut, sew, and finish 60 flags measuring 4 feet by 6 feet using industrial sewing equipment and either nylon or wool bunting. All production must strictly adhere to MIL-DTL-2692 and drawing 5-1-30 specifications. The scope of work includes the delivery of 60 finished identification flags and two first article samples, which will undergo visual, dimensional, and shade examinations for quality assurance. The project falls under NAICS code 314910 and is to be performed in zip code 85043, with a response deadline of November 12, 2026.

General Info

C AND T Supply Chain will fabricate 60 DoD identification flags by November 2026.

Agency

Department Of Defense → C AND T SUPPLY CHAIN

NAICS

314910 - Textile Bag and Canvas Mills

Place of Performance

AZ, 85043, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE1C1-27-Q-0142.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

FLAG, IDENTIFICATION

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 2

subcontract

Response DeadlineNov 12

Submission deadline

Response Deadline

11/12/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → C AND T SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → C AND T SUPPLY CHAIN

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Fabricates identification flags for prime contractors on DLA supply contracts. Cuts, sews, and finishes 60 flags (4-foot hoist, 6-foot fly) per MIL-DTL-2692 and drawing 5-1-30 using industrial sewing equipment and nylon or wool bunting. Produces two first article samples for visual, dimensional, and shade examination. Delivers 60 finished identification flags and 2 first article samples.

Similar Contracts

Same NAICS industry code

Manufacture of NAS1383 Webbing StrapsThis subcontract involves the manufacture of 14 finished webbing straps, identified by NSN 5340-01-451-5402, for prime contractors supporting the DLA Weapons Support Land Supply Chain. The production must adhere to NAS1383 Revision 7 and ensure full compliance with MIL-STD-1916 or ASQ H1331 for part number NAS1383C6C18R. Performance will take place in New Cumberland, Pennsylvania, utilizing industrial webbing looms and specialized tensile strength testing equipment. To qualify, the manufacturer must maintain ISO 9001 or AS9100 certification and ensure all deliverables meet MIL-STD-129 marking requirements. The project falls under NAICS code 314910 and is managed through the Department of Defense. Interested parties must respond by November 13, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

Specialized Military Container Fabrication (QUADCON II)This subcontract involves the fabrication of one QUADCON II shipping and storage container for prime contractors serving DLA Troop Support. The unit must be constructed to specific dimensions of 4 feet 9 inches by 8 feet by 6 feet 10 inches, featuring corrugated steel sides, a heavy-duty steel floor, roll-up and cargo doors, and integrated E-track systems. The final deliverable must be fully painted and certified. The contractor is required to adhere to strict technical and safety regulations, including ISO 668, 1161, 1496-1, 6346, and 830 standards, as well as CSC and IMDG certifications. Additionally, the fabrication process must comply with MIL-STD-209, 810, 1366, and 1472. This project is managed under the Department of Defense with a response deadline of November 9, 2026.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 7 hours ago

DEADLINE

Flyer's Helmet Bag ManufacturerThis subcontract opportunity with C AND T Supply Chain for the Department of Defense involves the manufacture and supply of Flyer's Helmet Bags. The selected provider will fabricate the bags in strict accordance with NSN 84150139228 technical specifications, ensuring all products are delivered to prime contractors supporting DLA Troop Support supply contracts. Performance for this contract will take place in Virginia Beach. To be eligible, manufacturers must utilize US-made textiles that are Berry Amendment compliant and provide the necessary certification. Additionally, the contractor is required to complete a CMMC Level 2 self-assessment. Interested parties must submit their responses by November 13, 2026.

C AND T SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

ACCUMULATOR ASSEMBL

Solicitation # SPE4A7-27-T-2610

Solicitation SPE4A7-27-T-2610 is a request for the procurement of three Accumulator Assemblies (NSN 1680-01-482-7137) for the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div. This procurement is issued under the First Destination Transportation program with a required delivery date of August 26, 2027, to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The award is a total small business set-aside under NAICS code 314910. Inspection and acceptance will occur at the origin, and the item is designated as a Navy Identified Critical Safety Item. Offerors must comply with strict quality and material standards, including SAE AS9100 quality management systems and domestic material restrictions such as the Buy American Act and the Berry Amendment. The use of additive manufacturing is prohibited unless specifically authorized. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and mandatory registration via the Account Management and Provisioning System for accessing the Vendor Shipment Module. Quotes should be submitted via DIBBS, and offerors are encouraged to provide quantity ranges to accommodate potential requirement changes.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

COVER, PROTECTIVE, ROCKE

Solicitation # SPE7LX-27-U-0471

Solicitation SPE7LX-27-U-0471 is a small business set-aside issued by the DLA Weapons Support Strategic Acquisition Program Directorate for the procurement of one protective cover for a rocket launcher, identified by NSN 1055015985331. This is an Indefinite Delivery Contract with a delivery requirement of 73 days after receipt of order, shipped FOB Origin. Inspection and acceptance will occur at the destination. The procurement is governed by NAICS code 314910 and requires the use of the Wide Area WorkFlow system for electronic invoicing and receiving reports. The item is classified as a defense article subject to the International Traffic in Arms Regulations and the Arms Export Control Act, requiring manufacturers or exporters to be registered with the Directorate of Defense Trade Controls. Technical compliance includes adherence to the DLA Master List of Technical and Quality Requirements, ASTM D3951 for packaging, and MIL-STD-129 for marking and labeling. Additionally, the contractor must provide a CMMC Level 2 self-assessment and comply with the Berry Amendment and Buy American Act. Evaluation for award will be based on the price quoted for the estimated annual demand.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 7 hours ago

DEADLINE

PREA-Compliant Hookless Shower Curtains SupplierThis subcontract involves the manufacture and supply of 500 specialized, high-security shower curtains for prime contractors working on City of Philadelphia Prisons projects. The curtains must measure 36 inches wide by 77 inches long and be constructed from 8 oz. 3-ply vinyl, 20-gauge clear vinyl, and 11 oz. synthetic fabric using hook-and-loop strips. All units must strictly adhere to Bob Barker Model SCVC3677CGC specifications. A critical requirement of the contract is full compliance with PREA safety standards, necessitating a completely metal-free design and official flame retardant certification. The project is categorized under NAICS code 314910 and will be performed in Philadelphia. Interested parties must respond by November 16, 2026.

POSTED

about 9 hours ago

DEADLINE

Manufacture of Crew Shelter TentsThis subcontract involves the manufacture of Crew Shelter Tents for prime contractors supporting the Government of Ontario Ministry of Natural Resources. The scope of work requires high-precision industrial sewing and bar tacking, specifically maintaining 7 to 10 stitches per inch for general sewing and 28 stitches per inch for bar tacking. Technical specifications mandate that seams be between 1/4 and 1/2 inch wide, sewn twice to ensure no raw edges are exposed, utilizing heavy-duty equipment, 1 inch webbing, and color-matched binding tape. The project is categorized under NAICS code 314910 and is based in Canada. Interested parties must adhere to the response deadline of December 2, 2026. The final deliverables must strictly meet all established technical workmanship criteria to be accepted by the agency.

Natural Resources

POSTED

about 9 hours ago

DEADLINE

Supply and Delivery of Sewn Goods – Option “1” Items and Option “2” Item

Solicitation # rfX_20534

The Government of Ontario, through the Ministry of Natural Resources, is soliciting bids for the manufacture and delivery of various sewn goods. The requirements are divided into two categories: Option 1, which includes a wide array of specialized gear such as Fire Incident Packs, hose packs, chainsaw carry packs, and various kit bags, and Option 2, which consists specifically of Crew Shelter Tents. Bidders have the flexibility to bid on either option or both. The contract emphasizes strict quality control and technical precision, requiring specific stitch densities of 7 to 10 stitches per inch, precise bar tacking at 28 stitches per inch, and specific seam widths and construction methods to ensure durability and professional workmanship. The award process follows a two-stage evaluation. In the first stage, bidders must submit physical samples to the Thunder Bay Provincial Logistics Centre for technical review. To qualify for the second stage, bidders must achieve a minimum technical score of 18 out of 26 points, based on criteria such as workmanship, material correctness, and adherence to construction guidelines. Qualified bidders then proceed to the commercial evaluation, where pricing is scored out of 104 points. Mandatory submission requirements include the Form of Offer, proof of insurance, WSIB coverage, tax compliance, and adherence to the Occupational Health and Safety Act. All bids must be submitted electronically via the Ontario Tenders Portal.

Natural Resources

POSTED

about 9 hours ago

DEADLINE

Retaining Harness Kit Fabrication and AssemblyThis subcontract involves the manufacture and assembly of 36 retaining harness kits for the DLA Weapons Support Land Supply Chain. The contractor is responsible for fabricating straps to precise military dimensions, assembling them into kits of eight, and applying property identification markings in accordance with MIL-STD-130N. To fulfill these requirements, the provider must utilize industrial textile cutting and sewing equipment and ensure all materials are Berry Amendment compliant. Completed kits must be packaged according to ASTM D3951 and MIL-STD-129 standards and delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The project falls under NAICS code 314910, with a response deadline set for November 12, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Aviation-Grade Webbing and HardwareThis subcontract involves the supply of raw aviation-grade webbing and fastening hardware to support prime contractors for the DLA Weapons Support Aviation Supply Chain. The scope of work requires the provision of high-strength synthetic webbing and metal hardware that strictly adhere to Lockheed Martin P/N 365717-12 specifications. To ensure full traceability and compliance with the Buy American Act, the supplier must provide all necessary material certifications and Certificates of Conformance. The contract is categorized under NAICS code 314910 and is managed through the Department of Defense. Performance of the contract will take place in Tracy, California. The procurement process began on November 1, 2026, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

Vehicular Seat Component SupplyThe Vehicular Seat Component Supply subcontract involves the provision of raw materials and semi-finished components for prime contractors supporting the DLA Weapons Support Land Supply Chain. The scope of work includes supplying military-grade upholstery fabrics, industrial foams, and precision-cut steel tubing specifically for NSN 2540-01-502-7357. To ensure quality and compliance, the supplier must provide essential material certifications, including Mill test reports and Certificates of Conformance, with deliveries made directly to the prime contractor or fabricator. This opportunity is categorized under NAICS code 314910 and is managed by the Department of Defense. The place of performance is located in New Cumberland, Pennsylvania. Interested parties should note that the solicitation was posted on November 1, 2026, with a response deadline set for November 12, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Involuntary Strap ManufacturerThis subcontract through C and T Supply Chain for the Department of Defense involves the manufacture of specialized involuntary straps to support DLA supply contracts. The selected manufacturer will fabricate restraints in red and yellow, specifically adhering to NSN 8465-01-470-6251 and NSN 8465-01-470-6253, using industrial textile and webbing machinery. The total delivery requirement consists of 16 bags, with each bag containing 10 restraints. To be eligible, the contractor must maintain ANSI/ISO/ASQ Q9001-2015 certification and ensure full compliance with the Buy American and Balance of Payments Program policies. The project falls under NAICS code 314910, with the place of performance located at FPO 96677. Responses to this solicitation are due by November 16, 2026.

C AND T SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → C AND T SUPPLY CHAIN

Same awarding agency

Military-Grade Ribbon Fabric SupplyThis subcontract for Military-Grade Ribbon Fabric Supply involves the provision of raw textile materials to prime contractors supporting the Department of Defense C and T Supply Chain. The scope of work focuses on delivering bulk rolls of woven ribbon fabric for NSN 8455-01-283-4483, specifically requiring dyed polyester or nylon blends that adhere to strict specifications regarding color, width, and material composition. The supplier is required to ensure full compliance with DFARS domestic preference regulations and must provide all necessary material certifications. This effort falls under NAICS code 313210, with performance located in zip code 85043. The solicitation was posted on November 2, 2026, with a response deadline of November 9, 2026.

Broadwoven Fabric Mills

POSTED

about 7 hours ago

DEADLINE

Meritorious Service Award Ribbon ProductionThis subcontract involves the manufacture and supply of 3,000 Meritorious Service Award ribbons for prime contractors supporting the Department of Defense C and T Supply Chain. The ribbons must be fabricated according to NSN 8455-01-283-4483 specifications and require the submission of five first article samples for approval. The contractor is responsible for adhering to strict military standards, specifically MIL-S-3951 for preservation and MIL-STD-2073-1E and MIL-STD-129 for packaging and marking. All completed and packaged ribbons are to be delivered to Phoenix, Arizona.

All Other Miscellaneous Textile Product Mills

POSTED

about 7 hours ago

DEADLINE

MIL-STD Compliant Packaging and Labeling ServicesThis subcontract for MIL-STD Compliant Packaging and Labeling Services supports prime contractors on DLA Troop Support C and T Supply Chain projects. The scope of work involves performing final marking, packaging, and palletization to ensure goods are ready for FOB Destination delivery. Specifically, the contractor must apply labels according to MIL-STD-129, pack items per MIL-STD-147 and MIL-STD-2073-1E, and prepare shipments using MIL-SPEC moisture barriers and cushioning in compliance with RP001 and MIL-STD-131. The project is managed under the Department of Defense for the C and T Supply Chain agency, with performance located in Jacksonville, Florida. The solicitation was posted on November 2, 2026, with a response deadline of November 13, 2026. This opportunity falls under NAICS code 561990.

All Other Support Services

POSTED

about 7 hours ago

DEADLINE

Berry Amendment Compliant Textile Material SupplyThis subcontract involves the supply of raw textile fabrics, webbing, and thread to prime contractors supporting Department of Defense projects under the DLA Troop Support C and T Supply Chain. The scope of work includes the sourcing and delivery of military-specification materials such as nylon, cordura, canvas, and high-tensile strength thread directly to the manufacturer. A critical requirement of this contract is strict adherence to the Berry Amendment, necessitating the provision of Certificates of Conformance to verify that all materials are of US origin. Performance for this contract is centered in Jacksonville, Florida, under NAICS code 313310.

Textile and Fabric Finishing Mills

POSTED

about 7 hours ago

DEADLINE

Finished Helmet Bag Production (NSN 8465-01-722-2180)This subcontract involves the full-scale manufacturing and assembly of two finished helmet bags under NSN 8465-01-722-2180 for the Department of Defense C and T Supply Chain. The scope of work includes cutting and sewing textile materials and assembling all necessary closures, straps, and reinforcements. To ensure compliance, the contractor must utilize industrial heavy-duty sewing machines and source nylon or canvas materials that adhere to Berry Amendment requirements. The project is categorized under NAICS code 315990 and will be performed in Jacksonville, Florida. Interested parties must submit their responses by November 13, 2026, to support prime contractors in fulfilling these DLA Troop Support requirements.

Apparel Accessories and Other Apparel Manufacturing

POSTED

about 7 hours ago

DEADLINE

Military-Grade Bunting SupplyThis subcontract, titled Military-Grade Bunting Supply, involves the provision of raw textile materials for prime contractors operating under Department of Defense supply contracts. The scope of work requires the delivery of high-grade nylon or wool bunting in bulk rolls, ensuring all materials strictly adhere to the shade and durability specifications outlined in MIL-DTL-2692. Managed by C AND T Supply Chain under NAICS code 313310, the contract focuses on the distribution of compatible fabrics to manufacturers or prime contractors. The performance of these services is centered in zip code 85043, with a response deadline set for November 12, 2026.

Textile and Fabric Finishing Mills

POSTED

about 7 hours ago

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract for Military-Grade Packaging and Marking Services, issued by C AND T SUPPLY CHAIN under the Department of Defense, requires specialized packaging, marking, and preservation for prime contractors on DLA Troop Support supply contracts. The service provider must ensure all items are processed according to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and MIL-C-19677C for preservation. The scope of work involves using industrial marking equipment and military-specification wraps and dunnage to produce shipments that are fully prepared for FOB Destination delivery. The project is categorized under NAICS code 561910 and will be performed in Austin, Texas. Interested parties must submit their responses by the deadline of November 13, 2026.

Packaging and Labeling Services

POSTED

about 7 hours ago

DEADLINE

Manufacturing of Gold-Plated Marine Corps Necktie ClaspsThis subcontract involves the manufacturing of 119,800 gold-plated Marine Corps necktie clasps for C and T Supply Chain under Department of Defense DLA Troop Support supply contracts. The contractor is responsible for fabricating the clasps to NSN 8455-01-503-1103 specifications using electroplating equipment and either casting or metal stamping processes. Performance will take place in Austin, Texas, with the final product delivered in monthly increments. Key requirements include the production of five first article samples for government testing and strict adherence to the Balance of Payments Program and Buy American regulations. The project falls under NAICS code 332999, with a response deadline set for November 13, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Berry Amendment Compliant Ribbon MaterialsThis subcontract through C AND T SUPPLY CHAIN for the Department of Defense involves the sourcing and delivery of raw textile materials and components necessary for the production of Service Ribbon Type I awards. The scope of work requires the provider to supply domestic-origin fabrics and threads directly to the manufacturer, ensuring all materials meet the strict requirements of the Berry Amendment. A critical component of this agreement is the provision of formal certification of origin to guarantee full regulatory compliance. The project is categorized under NAICS code 314121 and is centered in the 85043 zip code area. Interested parties must adhere to the response deadline of November 10, 2026.

Curtain and Drapery Mills

POSTED

about 7 hours ago

DEADLINE

Manufacturing of Service Ribbon Type I (NSN 8455-01-010-5641)This subcontract involves the manufacturing of 30,000 Service Ribbon Type I awards for prime contractors supporting C AND T SUPPLY CHAIN projects under the Department of Defense. The production must strictly adhere to NSN 8455-01-010-5641 and comply with MIL-STD-2073-1E, MIL-R-11589, and MIL-STD-129 standards. To ensure quality and regulatory alignment, the contractor is required to provide five first article samples for testing and obtain certification from The Institute of Heraldry. Additionally, the contract mandates full compliance with the Berry Amendment regarding domestic origin. The final deliverables consist of the 30,000 completed awards and the required initial samples. Performance for this effort is centered in zip code 85043 under NAICS code 339999.

All Other Miscellaneous Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Radio Bag Carriers (NSN 8465-20-014-0227)This subcontract through C AND T Supply Chain involves the procurement and delivery of 150 Radio Bag Carriers, specifically NSN 8465-20-014-0227, to support prime contractors delivering DLA Troop Support supply contracts. The contractor is required to source the exact part number TYR-JG-CM773-CYT from the authorized manufacturer, Tyr Tactical Canada, ULC. The agreement mandates strict adherence to DLA Packaging Requirements RP001 and the DLA Master List of Technical and Quality Requirements RA001. Additionally, all deliverables must comply with quality standards set forth in DFARS 252.204-7016 and FAR 52.246-11. The contract falls under NAICS code 423830 and is associated with the Department of Defense.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 7 hours ago

DEADLINE

Military-Grade Packaging and Palletization ServicesThis subcontract for Military-Grade Packaging and Palletization Services, issued by C AND T SUPPLY CHAIN under the Department of Defense, requires the specialized processing of 5,000 units for prime contractors fulfilling DLA supply contracts. The scope of work involves strict adherence to military standards, specifically MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. All shipments must be prepared for FOB Destination delivery using industrial marking equipment and MIL-SPEC materials. The project falls under NAICS code 493110 and will be performed in the 85043 zip code area. Interested parties must note the response deadline of November 11, 2026, following the posting date of November 2, 2026.

General Warehousing and Storage

POSTED

about 7 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS