This Government Contract opportunity from National Aeronautics And Space Administration was posted on September 3, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

IM&TE Calibration Services

Closed

Federal

Submission Closed09/08/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811210

New

SLED

Town Clock Rehabilitation

Solicitation # BD-26-1657-BOS03-BOS03-133342

The Town of Berlin is seeking written quotations from qualified contractors for the rehabilitation of the First Parish Town Clock located at 24 Central Street in Berlin, Massachusetts. The selected contractor will be responsible for providing all necessary labor, materials, equipment, supervision, transportation, rigging, and incidentals required to complete the project. Interested parties must submit sealed general bids to the Town Administrator at 23 Linden Street, Room 206, Berlin, MA 01503. The deadline for submission is September 30, 2026, by 2:00 p.m. local time. This solicitation is identified by bid number 2026-003 and is managed by the primary point of contact, Michael Tusino.

BOS03 - Town of Berlin

POSTED

DEADLINE

Statewide Standby Generator, ATS & UPS Preventive Maintenance Services

Solicitation # BD-27-1107-FREG5-ACCOU-133129

The Massachusetts Trial Court, through the Office of Court Management, Facilities Management & Capital Planning, is soliciting bids for statewide preventive maintenance, inspection, operational testing, load-bank testing, repair, and emergency services for standby generators, automatic transfer switches, and uninterruptible power supply systems. The contract is structured into five independent regional award groups, with each region being awarded to the lowest responsible and eligible bidder. The initial performance period is 32 months, running from November 1, 2026, to June 30, 2029, with two optional one-year renewals available through June 30, 2031. Bidders must submit their response packages electronically via the COMMBUYS portal by September 30, 2026, including a bid deposit of at least 5 percent of the greatest possible bid amount per region. Award evaluation is based on bid responsiveness, eligibility, and the lowest evaluated regional price, with a requirement that contractors demonstrate the capacity to perform in multiple regions simultaneously if awarded more than one. Contractors must adhere to NFPA 70B, the Massachusetts Comprehensive Fire Safety Code, and the Massachusetts Electrical Code, and are required to provide detailed electronic service reports as a condition of payment. Payments are processed via Electronic Funds Transfer through the Comptroller's system, typically 45 days from invoice receipt.

FREG5 - Facilities Management & Capital Planning - Region V

POSTED

DEADLINE

MY700 and MY300 Technical Repair and Maintenance

POSTED

DEADLINE

28V DC and 400 Hz Helo Power Supply Load Testing

Sflc Procurement Branch 1(00080)

POSTED

DEADLINE

Life Saving, Firefighting & Safety Equipment

Navsup Flt Logistics Ctr Yokosuka

POSTED

DEADLINE

Propulsion & Auxiliary Machinery Maintenance

Navsup Flt Logistics Ctr Yokosuka

POSTED

DEADLINE

Omnicell Automated Dispensing System Maintenance

Department Of Veterans Affairs

POSTED

DEADLINE

Automated Logic Control (ALC) BMS Maintenance

242-NETWORK Contract Office 02 (36C242)

POSTED

DEADLINE

Calibration of Equipment for 249th EN BAT

Solicitation # W912HQ26QA031

The Department of Defense, through the W4LD USA Hecsa office, is soliciting bids for the calibration of equipment for the 249th EN BAT under solicitation number W912HQ26QA031. This requirement falls under NAICS code 811210 and is managed by the office located in Alexandria, Virginia. Interested parties must submit their responses by the deadline of September 14, 2026. Primary contact for this opportunity is Giorgiana Chen, with Jordan Baker serving as the secondary point of contact. Additional details and amendments are available through the provided solicitation documents.

POSTED

DEADLINE

Notice of Intent to Award to a Single Source - Maintenance Service for Molecular Devices SpectraMax Paradigm Multi-Mode Microplate Readers - PCA-NIAID-09685

Solicitation # PCA-NIAID-09685

The National Institutes of Health National Institute of Allergy and Infectious Diseases intends to award a one-year firm-fixed-price contract to Molecular Devices for the maintenance of SpectraMax Paradigm Multi-Mode Microplate Readers. The services will be performed at the NIH Vaccine Immunology Program Lab in Gaithersburg, Maryland, and include a compliance assurance service plan, onsite performance assurance, onsite essential protection, and the replacement of consumable parts. This is a sole-source procurement based on the determination that using the proprietary factory service is necessary to maintain data integrity and control for ongoing research studies. While this is not a request for competitive quotations, interested parties may submit capability statements to James French by September 16, 2026, for consideration before a final award decision is made.

National Institutes Of Health

POSTED

DEADLINE

16--BUS POWER CONTROL U, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QNB26

This presolicitation under number N0038326QNB26 is for the repair and modification of 11 units of Bus Power Control U, identified by NSN 7R-1680-015854816-P8. The delivery terms are FOB Origin. Due to the flight critical nature of the part and the fact that essential technical data and manufacturing knowledge are held by approved sources, this requirement necessitates engineering source approval by the design control activity to ensure part quality. The government intends to solicit this requirement from a single source under FAR 6.302-1, though other responsible sources may submit capability statements or proposals within the specified timeframe. Any entity not previously approved as a source must submit the required documentation via the NAVSUP Weapon Systems Support Source Approval Information Brochures to be considered for award. Failure to provide the necessary qualification data will result in the proposal not being considered.

Navsup Weapon Systems Support

POSTED

DEADLINE

66--COMPUTER,FLIGHT CON, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QSC24

This presolicitation notice, issued by the Navsup Weapon Systems Support under the Department of Defense, concerns the repair and modification of flight control computers. The requirement is for seven units under NSN 7R-6615-016276036-P8, utilizing TDP version 001, with delivery terms set as FOB Origin. The solicitation, numbered N0038326QSC24, was posted on September 11, 2026, with a response deadline of October 27, 2026. The contracting office is located in Philadelphia, Pennsylvania, and the primary point of contact for this requirement is Sarah L. Austin.

Navsup Weapon Systems Support

POSTED

about 23 hours ago

DEADLINE

in about 1 month

AI Contract Overview

This subcontract for the NASA Ames Research Center involves providing precision calibration services for inspection, measurement, and test equipment used by prime contractors. The scope of work covers critical operations including Wind Tunnel Operations, Aerospace Simulation, Thermophysics Facilities, and Thermal Protection Materials. The selected provider is responsible for delivering calibrated equipment, maintaining detailed calibration certificates, and performing necessary trend analysis. To ensure technical accuracy and quality, the contractor must maintain ANSI/ISO/IEC 17025:2000 accreditation and comply with ISO 9001 and ANSI/NCSL Z540 standards. This opportunity falls under NAICS code 811210 and is associated with the National Aeronautics And Space Administration. The response deadline for this requirement is September 8, 2026.

General Info

NASA Ames subcontract for precision calibration services; ISO 17025 accredited; deadline September 8, 2026.

Agency

National Aeronautics And Space Administration → NASA Ames Research CenterView Agency

NAICS

811210 - Electronic and Precision Equipment Repair and MaintenanceView NAICS

Place of Performance

0, CA, 94035, USA

Set-Aside

NONE

Documents

This scope was carved out of 80ARC026Q0004.

The full solicitation package (23 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

IM&TE Calibration Services

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedSep 3

subcontract

Response DeadlineSep 8

Deadline has passed

Submission Closed

09/08/2026, 09:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyNational Aeronautics And Space Administration → NASA Ames Research Center

ContactsNo contacts available

OfficeN/A

Organization / Agency

National Aeronautics And Space Administration → NASA Ames Research Center

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Performs precision calibration of inspection, measurement, and test equipment (IM&TE) for prime contractors on NASA Ames Research Center projects. Calibrates equipment for Wind Tunnel Operations, Aerospace Simulation, Thermophysics Facilities, and Thermal Protection Materials. Maintains calibration certificates and performs trend analysis. Requires ANSI/ISO/IEC 17025:2000 accreditation and compliance with ISO 9001 and ANSI/NCSL Z540. Delivers calibrated equipment and certified reports.