This Government Contract opportunity from Department Of Defense was posted on September 1, 2010. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Indium/Gold Evaporator

Awarded

FA8601-10-P-0474Federal

Submission Closed08/30/2010, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333994

New

Federal

Modular Test Furnace with Auxiliary Exhaust Burner AssemblyThe Department of Energy, specifically the Office of Fossil Energy, has issued a forecast for the procurement of a Modular Test Furnace with Auxiliary Exhaust Burner Assembly. This project is categorized under NAICS code 333994 and is designated as a small business set-aside. The performance of this contract will take place in Ohio. Interested parties may coordinate with Brian Halstead, the Small Business Program Manager, regarding this acquisition opportunity.

Office of Fossil Energy

POSTED

DEADLINE

IRA Purchase of Carbolite-Gero (Verder Scientific, Inc.) Horizontal High Temperature Tube Furnace up to 1800 °C per the attached specifications: 1. Horizontal High Temperature Tube Furnace up to 1800…The Department of Energy's Office of Fossil Energy is forecasting the purchase of four Carbolite-Gero Horizontal High Temperature Tube Furnaces capable of reaching 1800 degrees Celsius. This acquisition includes several critical enhancements for each unit, such as CC-T1 upgrades from 3016P1, heat shields with flange supports, custom Gero modifications, and CSA inspections. Additionally, the order specifies 13-meter cables for each furnace and covers the associated freight costs. The procurement is categorized under NAICS code 333994 and is slated for performance in Pennsylvania. While the solicitation number is not yet available, the forecast was posted on October 18, 2026. Brian Halstead serves as the Small Business Program Manager and primary point of contact for this requirement.

Office of Fossil Energy

POSTED

DEADLINE

Purchase of Walk-in Ovens

Solicitation # F2027038

Tarrant County is soliciting bids for the replacement of three commercial ovens at the Lon Evans Corrections Center under solicitation number F2027038. The project requires the awarded vendor to provide all labor and materials for the uninstallation and removal of existing equipment and the installation of three new double rack rotating ovens. To be eligible for award, bidders must bid on all items and meet strict technical specifications, including the use of a 275k BTU gas system, a Type I hood with UL 710 listed grease filters, compliance with NFPA-96 requirements, and the inclusion of a prison security package. The contract will be awarded to the lowest bidder meeting these specifications. Bidders must submit detailed product specifications, warranty information, and electrical and gas system requirements, ensuring all delivery, labor, travel, and freight costs are included in the installation pricing. The response deadline is November 30, 2026. Tarrant County adheres to a HUB policy for disadvantaged business enterprises and requires that bidders do not owe delinquent property taxes within the county. Payment is typically issued within thirty days of receiving the invoice or items, and the county maintains audit rights for twelve months following final payment. Additionally, vendors must comply with data security standards and may be subject to criminal background checks for personnel accessing secure facilities.

POSTED

DEADLINE

OVEN ASSEMBLY, SINGLE

Solicitation # SPE3SE-27-Q-0036

Solicitation SPE3SE-27-Q-0036 is a request for quotations issued by the DLA Troop Support Subsistence FSE Supply Chain for the procurement of one single oven assembly, identified by NSN 7310-01-486-4360. The requirement is a firm fixed price contract with a delivery schedule of 30 days after receipt of order. Delivery, inspection, and acceptance are all set for the destination point at the Letterkenny Army Depot in Chambersburg, Pennsylvania. The assembly must be manufactured in accordance with Technical Data Package Rev A Gen 1 and a series of specific reference drawings dated between July 11 and July 14, 2014. The contractor must adhere to strict packaging and marking standards, utilizing ASTM D3951 and MIL-STD-129, while ensuring that DLA Master List of Technical and Quality Requirements and RP001 palletization standards take precedence. Invoicing must be processed electronically via the Wide Area Workflow system, with proof of delivery submitted to the DLA FSE Post Award office. The contract incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information, cyber incident reporting, and the prohibition of certain foreign telecommunications equipment. Offerors must be registered in the System for Award Management and provide necessary CAGE and UEI identifiers.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

CARTRIDGE, DEHYDRATOR

Solicitation # SPE8E8-27-T-0203

Solicitation SPE8E8-27-T-0203 is a request for the procurement of 21 dehydrator cartridges, identified by NSN 4440-01-582-6344 and part number 657-400-001 from Compass Instruments Inc. The items are designated as Type 2 Code 9 with an extendable shelf life of 60 months. Delivery is required within 29 days of award, with a need ship date of November 25, 2026, and a final required delivery date of November 30, 2026. The shipment is FOB Origin and will be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to MIL-STD-2073-1E for packaging, RP001 for palletization, and MIL-STD-129 for marking. Technical and quality requirements are governed by the DLA Master List, including specific provisions for source approval requests and the removal of government identification from non-accepted supplies. All quotes must be submitted via the DIBBS portal by October 26, 2026. The award process may be automated, and the government will not evaluate offers utilizing additive manufacturing. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and various FAR/DFARS clauses regarding cybersecurity, human trafficking, and telecommunications equipment. Invoicing must be processed electronically through the Wide Area WorkFlow system.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE4A8-27-Q-0003

Solicitation SPE4A8-27-Q-0003 is a request for a firm-fixed-price contract issued by the Defense Logistics Agency Weapons Support for the upgrade of a medium Thermal Equipment Corporation composite autoclave system located at the Fleet Readiness Center East in MCAS Cherry Point, North Carolina. The scope of work involves furnishing, installing, and integrating critical hardware upgrades, including the replacement of the Motor Control Center and its internal wiring, vacuum receivers, receiver control valve assemblies, I/P pressure transducers, and the cooling-coil vacuum breaker. Additionally, the contractor must replace the scissor-lift bridge hoist system and its associated locking mechanisms with a new self-contained Hydraulic Power Unit and install a government-provided Windows 11 HMI computer and color inkjet printer. The contract requires a performance period of 365 days after receipt of order, with specific deliverables including technical data, installation services, and IUID tagging in accordance with MIL-STD-130N. All work must adhere to strict safety and technical standards, including NFPA 70, ISO 4413, and OSHA 29 CFR 1910. This acquisition is set aside for Small Business, HUBZone Small Business, and Service-Disabled Veteran-Owned Small Business concerns. Award will be based on best value, evaluating technical compliance, past performance, and price. Offerors must submit detailed technical quotes, descriptive literature, and past performance questionnaires via DIBBS, email, or mail by the closing date of November 23, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Vacuum Induction Melting Furnace - Cooler

Solicitation # 2627-030

The Saskatchewan Research Council is seeking quotations for the supply of two complete closed loop cooling water packages for a Vacuum Induction Melting furnace. These systems will be utilized within the REE Commercial Division in Saskatoon, Saskatchewan, to remove heat generated during the induction melting process and ensure safe, reliable operation by maintaining specific inlet water conditions. This solicitation, identified by number 2627-030, was posted on October 6, 2026, with a response deadline of October 21, 2026. Interested parties can coordinate with the primary point of contact, Roger Dauvin, regarding the requirements for this project located in Saskatchewan.

Saskatchewan Research Council

POSTED

DEADLINE

Animal Care Services (ACS) Crematorium Replacement

Solicitation # 2001045440

The City of San Antonio is soliciting bids for the Animal Care Services Crematorium Replacement under solicitation number 2001045440. This turnkey project requires the fabrication, purchase, delivery, installation, startup, and staff training for one commercial grade cremation unit designed for animal remains at a large municipal shelter. The scope of work encompasses all necessary equipment, materials, permits, testing, commissioning, and labor. A critical component of the project is the removal and proper disposal of an existing incinerator located in an outdoor covered area, which necessitates obtaining FAA approval for crane usage. The project will be performed at the Animal Care Services facility located at 4710 State Highway 151, San Antonio, Texas. Bids are due by November 3, 2026, at 2:00 p.m. Interested parties should note that a pre-bid conference was scheduled for October 12, 2026, followed by a site visit on October 13, 2026. The solicitation is categorized under NAICS code 333994 and involves industrial incinerator standards and maintenance services.

POSTED

DEADLINE

High-Pressure Ratio Compressor Design and PrototypingThe NASA SBIR/STTR Program is seeking a subcontractor for the mechanical and systems engineering design of a specialized compressor intended for supercritical gases in space environments. The technical requirements focus on developing a compact system capable of achieving a high compression ratio of 100:1 and operating at pressures up to 3,000 psia. This opportunity is designated as a Total Small Business Set-Aside under the SBIR/STTR mandate, restricting eligibility to firms with fewer than 500 employees. The project falls under NAICS code 333994 and is slated for performance in Cleveland, Ohio.

NASA SBIR/STTR Program

POSTED

DEADLINE

Microgravity Slurry Mixing and Pumping System Design & FabricationThis subcontract through the NASA SBIR/STTR Program focuses on the design, prototyping, and fabrication of a flight-ready slurry mixing and pumping system. The system is intended for integration into a carbon formation reactor and must be engineered for reliable operation within microgravity environments. The project is designated as a Total Small Business Set-Aside for firms with fewer than 500 employees, falling under NAICS code 333994. Performance of the contract is centered in Huntsville, Alabama, and is managed under the agency's specialized small business innovation research framework.

NASA SBIR/STTR Program

POSTED

DEADLINE

Reciprocating Compressor SupplyThis subcontract with the Defense Logistics Agency under the Department of Defense involves the supply of military-grade reciprocating compressors. The items are to be provided as physical deliveries under specific Contract Line Item Numbers and must strictly adhere to DLA standards for packaging, marking, and invoicing. The contract is categorized under NAICS code 333994 and was posted on August 17, 2026. All deliverables must meet the rigorous technical and logistical requirements set forth by the agency to ensure compliance with military procurement standards.

Defense Logistics Agency

POSTED

DEADLINE

Industrial Chain Hoist Supply and DeliveryThis subcontract with the Defense Logistics Agency under the Department of Defense involves the supply and delivery of one heavy-duty chain hoist, identified by NSN 3950011985598. The equipment must strictly adhere to military specifications, with all packaging, labeling, and preservation processes conducted in accordance with established MIL standards. The contract falls under NAICS code 333994 and was posted on August 17, 2026. All deliverables must meet the rigorous quality and technical requirements mandated by the agency to ensure operational readiness and compliance with defense procurement standards.

Defense Logistics Agency

POSTED

2 months ago

DEADLINE

N/A

AI Contract Overview

This contract is a request for quotations to procure a clean room compatible Indium/gold thermal evaporator, specifically a Denton Vacuum Explorer system or equivalent, for the Air Force Sensors Directorate Focal Plane Array Laboratory. The system will be used to form Indium bump bonds for cold welding focal plane array assemblies. Key technical specifications include a 304 stainless steel deposition chamber, automated programmable logic control systems, a water-cooled substrate holder with heating capabilities up to 300 degrees Celsius, and dual resistive evaporation assemblies for the simultaneous co-evaporation of Gold and Indium. The procurement also requires a high vacuum cryopump, a dry scroll pump, and a thickness uniformity certification of 5 percent or better. The vendor is responsible for on-site installation, functional testing both before shipment and after installation, and providing process support for Indium bump bond formation. This is a brand name purchase issued under simplified acquisition procedures with a size standard of 500 employees under NAICS 333994. Award evaluation is based on the lowest price technically acceptable criteria, with payment terms set at Net 30 Days and shipping designated as FOB Destination.

General Info

Agency

Department Of Defense → FA8601 Aflcmc Pzio

Contract Value

$154,600

NAICS

333994 - Industrial Process Furnace and Oven Manufacturing

Place of Performance

1940 Allbrook Drive, Wright Patterson-AFB, OH, 45433, USA

Set-Aside

NONE

Awardee

DENTON VACUUM L.L.C.

Award Issued Date

08/30/2010, 12:00:00 AM UTC

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded

PostedAug 11

Combined Synopsis

AwardedAug 30

Contract was awarded

Submission Closed

08/30/2010, 12:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FA8601 Aflcmc Pzio

Contacts1 person available

OfficeWRIGHT PATTERSON AFB, OH, 45433-5344, USA

Organization / AgencyDepartment Of Defense → FA8601 Aflcmc Pzio

Office AddressWRIGHT PATTERSON AFB, OH, 45433-5344, USA

Contacts

Maria Elena A. FernandezContract Specialist

contact@example.gov

+1 (555) 000-0000

Full Description

TO PROCURE an Indium/gold thermal evaporator. The proposed item shall be a Denton Vacuum Explorer system or equivalent. The vendor will provide a clean room compatible thin film deposition system for the thermal evaporation of both Gold (Au) and Indium (In) metals. This capability is required for use with the Focal Plane Array (FPA) Laboratory of the Air Force Sensors Directorate. Metals evaporated in this system will be used to form Indium bump bonds for cold welding of focal plane array assemblies. Specific requirements for the system to be procured include: 1. 14"(w) x 14" (D) 304 stainless steel deposition chamber that is a minimum of 30" in height for improved deposition uniformity 2. Internal 304 stainless steel collimation shields for rejection of off-axis material flux 3. Color touch screen programmable logic control systems for system operation and interface. System operation to be completely automated and controlled using this system 4. Bulk water-cooled, single rotation substrate holder for a single (1) 3.0" substrate a. Rotation speed adjust (0-20 RPM) b. Heating capability of substrate up to 300�C. Heater fixturing to be behind substrate holder to limit Indium coating 5. Shutter assembly for sample and hold operation if desired 6. Water-cooled, quartz crystal sensor head assembly 7. Inficon quartz crystal rate controller for the determination of deposition rates 8. Computer-controlled electro-pneumatic source shutter 9. Dual resistive evaporation assemblies with power supplies for co-evaporation of both Gold and Indium simultaneously i. 2.0 kW resistive evaporation assembly for Au or other metals ii. 4.0kW resistive evaporation assembly for Indium evaporation (set into well assembly for better Indium containment) 10. Minimum 50cc Indium source container 11. Minimum two (2) electronic Pirani gauges 12. Minimum of two (2) full range ionization gauges for high vacuum measurement. Gauges must be mounted with right angle elbow for protection from migrating Indium 13. Cryopump valving package 14. High vacuum gate valve 15. Minimum of 7.9 cubic feet/minute dry scroll pump for vacuum chamber roughing 16. Minimum of 1500 liter/second (air) cryo pump with air cooled compressor for high vacuum operation 17. Thickness uniformity certified to be 5% or better by manufacturer 18. Installation on site by manufacturer's personnel 19. Functional testing prior to shipment and upon receipt and installation completion 20. Process support by manufacturer in the area of Indium bump bond formation for FPA applications This is a brand name purchase and any offer must meet all requirements above. This solicitation is a request for quotations. This RFQ is issued under simplified acquisition procedures. The size standard for this effort is 500 employees. NAICS 333994. FOB: Destination. Payment Terms Net 30 Days: Evaluation of Award will be based on (LPTA) lowest price technically acceptable to the Government. ATTN: The following clauses and provisions apply: 52.209-6 Protecting the Government's interest when Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment 52.204-4 Printed or copied double sided on recycled paper 52.209-6 Protecting the government's interest when subcontracting with contractors debarred, suspended, or proposed for debarment 52.211-6 Brand name or equal 52.212-3 Offerors representations and certifications 52.212-4 Contract terms and Conditions- Commercial Items 52.212-5 Contract terms and Conditions required to implement statutes or executive orders-commercial items 52.222-3 Convict Labor 52.222-21 Prohibition of Segregated Facilities 52.222-26 Equal Opportunity 52.222-35 Equal Opp for SDV, VVE, and other eligible veterans 52.222-36 Affirmative Action for Workers w/disabilities 52.222-37 Employment Reports on Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans 52.222-50 Combat Trafficking in Persons 52.222-99 Notification of Employee Rights under the National Labor Relations Act 52.232-33 Electronic Payments 52.252-1(a) Solicitation provisions incorporated by reference 52.252-2 Clauses incorporated by reference 52.233-2 Service of Protest 252.209-7001 Disclosure of Ownership or Control by the Government of a Terrorist country 252.209-7004 Subcontracting with Firms that are owned or controlled by the government of a terrorist country 252.211-7003 Unique Identifier 252.212-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items 252.203-7000 requirements relating to compensation of former DoD officials 252.225-7001 Buy American 252.225-7002 Qualifying country sources as subcontractors 252.225-7005 Identification of expenditures in the United States 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports 252.232-7010 Levies on Contract Payments 252.246-7000 Material inspection and receiving report ASC/PKO G-001 Wide Area Workflow 5352.201-9101 Ombudsman Quotations: Submit your Quotation to Maria Elena Fernandez at mariaelena.fernandez@wpafb.af.mil by 25 August 2010.