This Subcontract opportunity from Department Of Defense was posted on August 28, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Industrial Electrical Installation & Integration

Closed

Federal

Submission Closed09/11/2026, 06:00:00 PM CDT

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238210

New

Traffic Control and SignalizationThis subcontract, titled Traffic Control and Signalization, is issued by Norstar Plumbing and Engineering, Inc. for work on the IEUA Regional Water Recycling Plant No. 5 and Butterfield Lift Station projects. The selected contractor will be responsible for managing traffic control and performing the installation of traffic signals to ensure a safe work zone and fully functional signalization for the prime contractors. The opportunity is designated as a set-aside for SBA certified HUBZone Small Businesses and Disadvantaged Business Enterprises under NAICS code 238210. The solicitation was posted on November 10, 2026, with a response deadline of November 19, 2026.

Norstar Plumbing and Engineering, Inc

POSTED

DEADLINE

Inland Empire Job Corps-Request for Quote Electrical Repairs

Solicitation # Inland Empire Job Corps Electrical Repairs

Management & Training Corporation (MTC) is seeking quotations for a subcontracting opportunity to perform electrical and fire alarm repairs at the Inland Empire Job Corps Center in San Bernardino, California. Under NAICS code 238210, the selected contractor must provide all labor, materials, equipment, and permits to correct specific deficiencies. The scope of work includes installing GFCI protection in the cafeteria, culinary arts kitchen, and academic education building, repairing open-ground conditions in the dormitory and medical areas, and installing filler plates in panelboards. Additionally, the contractor must correct deficiencies in panelboards KL2A, PF, C, and H1, update circuit directories for several panels, and provide permanent labeling for feeder conductors and distribution equipment throughout the facility. All work must comply with National Electrical Code (NEC), NFPA, and applicable federal, state, and local requirements. Bids must be submitted as a lump sum fee by November 12, 2026, at 3:00 PM PT. To be considered, offerors must provide a completed bid sheet, a W-9, a supplier self-certification form, proof of insurance with at least $1,000,000 in general liability and $500,000 in employer's liability, and three references for projects of similar scope. This opportunity is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certifications. Award decisions are based on best value as determined by MTC. The contract is subject to Service Contract Labor Standards wage determinations for Riverside and San Bernardino counties and includes strict requirements for information security, privacy breach notification, and mandatory Department of Labor training for employees.

Inland Empire Job Corps

POSTED

DEADLINE

26-140 Installation of Emergency Shut Off Switches

Solicitation # 26-140

Solicitation 26-140 is a subcontracting opportunity for the installation of emergency shut-off switches on power tools at the Atterbury Job Corps Center in Edinburgh, Indiana, operated by Adams and Associates for the U.S. Department of Labor. The scope of work specifically requires the installation of two mushroom-head push-button emergency shut-off switches and a new 60A, 208/120V, 3-phase, 4-wire, 6-circuit branch circuit panel with a 60A shunt-trip main circuit breaker in the Facility Engineering Storage/Maintenance Shop. All work must comply with OSHA, EPA, and FNC guidelines, as well as applicable Indiana state and local building codes. The project is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certifications. Interested bidders must have attended a mandatory site visit on November 10, 2026, and submit a typed proposal on company letterhead by November 20, 2026. Proposals must be submitted as a single lump sum contract including a detailed cost breakdown, a timeline for substantial completion, and proof of a valid Indiana Contractor's License. Award will be based on best value, evaluated across price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). Contractors are required to maintain comprehensive insurance, including general liability of at least $1,000,000 per occurrence and automobile liability. Compliance with Davis-Bacon Act wage rates is mandatory. The contract features Net 30 payment terms, and final payment is contingent upon the submission of a completed SF 1413, certified payroll records, and a release of liens. All workmanship is guaranteed for one year following the date of substantial completion.

Atterbury Job Corps. – Adams & Associates

POSTED

DEADLINE

Transformer Oil Testing Services

Solicitation # RFP-VC-26-010

The Inland Empire Utilities Agency is soliciting proposals under RFP-VC-26-010 for professional transformer oil testing services to enhance the reliability, safety, and maintainability of its transformers. The project scope encompasses three primary areas: performing visual and infrared thermographic inspections to identify thermal anomalies, installing standardized external oil sampling devices to improve safety during collection, and conducting oil testing analysis. Additionally, the selected contractor will evaluate nitrogen blanket systems, assess monitoring instrumentation, develop preventive maintenance checklists, and provide on-site training for agency staff. All work must be performed at designated agency facilities in Rancho Cucamonga and Chino, adhering to NETA MTS, IEEE, NFPA 70E, and ASTM D923 standards. The agency intends to make a single award to the most capable and cost-effective offeror. Evaluation criteria include a proven track record of at least two similar projects within the last five years, personnel qualifications, the proposed staffing plan, and the ability to meet the project timeline. Proposals must be submitted electronically via the PlanetBids portal by December 23, 2026, and must include a comprehensive set of documents, including a company profile, project methodology, and various certifications such as a Non-Collusion Statement and Workers Compensation Certificate. Payment will be processed electronically via ACH within 30 days of invoice approval by the Project Manager.

Inland Empire Utilities Agency

POSTED

DEADLINE

Purified Water Replenishment San Jacinto Valley Advanced Water Purification Facility

Solicitation # purified-water-replenishment-san-jacinto-valley-advanced-water-purification-facility-2

Axia Electric LLC is soliciting bids from SBE/DBE certified firms for the Eastern Municipal Water District's Purified Water Replenishment San Jacinto Valley Advanced Water Purification Facility Project in California. The scope of work is divided between the San Jacinto Valley Advanced Water Purification Facility and Brine Ponds, specifically requesting subcontractors for low voltage systems, fiber optics, and electrical materials and supplies. Bids must be submitted via email to the lead estimator, Ryan Falk, by 2:00 PM on November 18th, with a final deadline of November 19th. Qualified bidders must be registered to perform public work pursuant to Labor Code Section 1725.5 and agree to abide by the AGC Master Labor Agreements and Axia's Standard Long Form Subcontract or Purchase Order. Minimum insurance requirements include 1 million dollars for General Liability per occurrence, 2 million dollars for Aggregate and Completed Operations, 5 million dollars for Excess Liability, 1 million dollars for Auto Liability, and 1 million dollars for Workers Compensation and Employer Liability. Evaluation will be based on SBE/DBE participation, responsiveness to deadlines, and insurance compliance.

POSTED

DEADLINE

Centennial JCC Emergency Lighting Replacement, Upgrade, Testing & Maintenance Services

Solicitation # centennial-jcc-emergency-lighting-replacement-upgrade-testing-maintenance-services

Management & Training Corporation is soliciting bids for a fixed-price, single lump sum subcontract to provide emergency lighting replacement, upgrade, testing, and maintenance services at the Centennial Job Corps Center in Nampa, Idaho. The project involves the inspection, testing, repair, and certification of emergency lighting systems across several facility areas, including the cafeteria, education building, recreation center, and men's and women's dormitories. The contractor is responsible for providing all labor, materials, and equipment to inventory fixtures, perform functional power-outage testing, apply durable tracking labels to fixtures, and integrate recurring maintenance into the operator's Computerized Maintenance Management System. All work must comply with NFPA 101 (2024 Edition), NFPA 70, and OSHA safety regulations. The estimated contract value ranges between $25,000 and $100,000, with bids due by December 1, 2026. This is a small business set-aside opportunity open to various SBA certifications. Mandatory bid requirements include a physical site visit and a bid bond guarantee of 20% for bids equal to or exceeding $25,000. Awarded contractors must provide performance and payment bonds and adhere to Davis-Bacon Act prevailing wage rates and Federal Contractor Minimum Wage requirements. Evaluation is based on overall best value, and the submission must include a detailed cost breakout, a completed supplier packet, and a signed bid form.

Management & Training Corporation/Centennial Job Corps Center

POSTED

DEADLINE

ASO-1489-00 Installation of Distance Measuring Equipment (DME) on runway 15 at the Charleston International Airport in Charlston, SC

Solicitation # aso-1489-00-installation-distance-measuring-equipment-dme-runway-15-charleston-international-airport

This solicitation, identified as ASO-1489-00, involves the construction and installation of Distance Measuring Equipment (DME) to be collocated with the Runway 15 Localizer at Charleston International Airport in South Carolina. Managed by Parsons, the project falls under NAICS code 238210 and is specifically designated as a set-aside for various small business types, including Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone Small Businesses. Interested parties must submit their responses by the deadline of November 27, 2026. The primary point of contact for this opportunity is Quentin Wack. This project represents a targeted effort to enhance navigational infrastructure at the Charleston International Airport through qualified small business participation.

POSTED

DEADLINE

AMC-0235 TBD VOR Public Announcement

Solicitation # amc-0235-tbd-vor-public-announcement

This solicitation, issued by PTSI Managed Services Inc. (Parsons), involves a comprehensive construction project located in Louisiana. The scope of work encompasses a variety of facility improvements, including electrical work and grounding system repairs, roofing installation, plumbing replacements, grading, painting, and door repairs. The estimated magnitude of construction for these services is valued between 500,000 and 1,000,000 dollars. The opportunity is designated as an SBA set-aside, specifically open to Small Businesses, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, and Veteran-Owned Small Businesses. Interested parties must submit their responses by November 16, 2026. The project falls under NAICS code 238210, and primary inquiries should be directed to Kurtis Kinard.

PTSI Managed Services Inc. (Parsons)

POSTED

DEADLINE

ASO-0728-00 DME Shelter Installation in Shelby, NC

Solicitation # aso-0728-00-dme-shelter-installation-shelby-nc

Parsons Corporation is soliciting bids for the installation of a DME shelter in Shelby, North Carolina. The scope of work includes the installation of a shelter furnished by others, along with a DME antenna, associated foundations, a junction box, a meter rack, underground conduit, grounding, and conductors. This project falls under NAICS code 238210. The solicitation is open to various small business classifications, including SBA certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone Small Businesses. Interested parties must submit their responses by the deadline of December 30, 2026. Primary coordination for this opportunity is handled by Quentin Wack.

POSTED

DEADLINE

FRSMP277009/JLM-Lighting Phase 2

Solicitation # WMATA-0000010972

The Washington Metropolitan Area Transit Authority is soliciting bids for contract FRSMP277009/JLM-Lighting Phase 2 under solicitation number WMATA-0000010972. This project falls under NAICS code 238210, which pertains to electrical contracting and related services. The solicitation was posted on November 10, 2026, and requires all responses to be submitted by the deadline of December 2, 2026. Interested parties can find further details and submission guidelines through the official WMATA supplier portal.

Washington Metropolitan Area Transit Authority

POSTED

DEADLINE

Street Light Electrical MaintenanceThis subcontract for Street Light Electrical Maintenance involves providing comprehensive repair and maintenance services for street lighting systems on City of Delta municipal projects. The selected contractor will support prime contractors by utilizing bucket trucks for elevated work and providing electrical repairs on a 24/7 call-out basis to ensure a fully operational lighting system. Qualified candidates must provide ticketed journeyman electricians, with a preference for those holding IMSA Work Zone Traffic Safety and Traffic Signal Field Technician 2 certifications. This opportunity is categorized under NAICS code 238210 and is located in Canada, with a response deadline set for November 30, 2026.

POSTED

DEADLINE

Electrical Contractor for Streetlight Maintenance

Solicitation # 26-148

The City of Delta is soliciting proposals for an electrical contractor to provide as and when requested street light maintenance services in British Columbia. The contractor must be capable of providing maintenance support 24 hours per day, 7 days per week, utilizing ticketed journeyman electricians for all electrical works. The scope includes both electrical services using bucket trucks and civil works involving underground specialists equipped with jack hammers, compressors, and roadway concrete saws. Proposals will be evaluated based on firm experience, team qualifications, and the proposed methodology. Mandatory requirements include the use of ticketed journeymen, while IMSA Work Zone Traffic Safety and Traffic Signal Field Technician 2 certifications are preferred. Applicants must provide a summary of their 2025 Worksafe BC safety record, a minimum of three references from similar public sector contracts, and a detailed description of their fleet and equipment. The successful proponent must maintain a stable team and cannot change personnel without written approval from the City.

City of Delta

POSTED

about 12 hours ago

DEADLINE

in 20 days

AI Contract Overview

This subcontract for Industrial Electrical Installation and Integration involves providing electrical retrofit packages for prime contractors at the Army Contracting Command-Rock Island facility. The scope of work includes installing CNC controls, NEMA-standard wiring and enclosures, and updated servo and spindle motors. The contractor is responsible for system debugging to ensure qualification cuts exceeding six feet meet a strict tolerance of plus or minus 0.0005 inches, ultimately delivering a fully operational Cincinnati Lathe. The project is designated as a total Small Business Set Aside under NAICS code 238210 and is managed by the Department of Defense. All work must be performed in strict accordance with OSHA arc flash and lockout/tagout procedures to ensure safety. The performance location is situated in Rock Island, zip code 61299, with a response deadline of September 11, 2026.

General Info

Electrical retrofit and CNC installation for Cincinnati Lathe at Army Contracting Command-Rock Island.

Agency

Department Of Defense → W6QK Acc-Ri

NAICS

238210 - Electrical Contractors and Other Wiring Installation Contractors

Place of Performance

Rock Island, IL, 61299, USA

Set-Aside

SBA

Documents

This scope was carved out of W519TC-26-Q-A181.

The full solicitation package (28 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Cincinnati Lathe MO Retrofit

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedAug 28

subcontract

Response DeadlineSep 11

Deadline has passed

Submission Closed

09/11/2026, 06:00:00 PM CDT

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → W6QK Acc-Ri

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → W6QK Acc-Ri

Office AddressN/A

ContactsNo contact information available

Full Description

Installs electrical retrofit packages for prime contractors on Army Contracting Command-Rock Island facility projects. Installs CNC controls, updated servo and spindle motors, and NEMA-standard wiring and enclosures. Performs system debugging to ensure qualification cuts (>6ft) meet tolerances of ± 0.0005 inches. Adheres to OSHA arc flash and lockout/tagout (LOTO) procedures. Delivers a fully operational Cincinnati Lathe.