Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

Industrial motor and electrical control maintenance RFP

Active
656bdc64-f1c6-40c6-85f2-429f59c01a75State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The State of New Hampshire, Department of Natural and Cultural Resources, Division of Parks and Recreation, is soliciting proposals from qualified vendors to provide comprehensive maintenance and repair services for the snowmaking system at Cannon Mountain Ski Area. The scope of work includes industrial motor and electrical control maintenance, inspection, diagnostic testing, overhauls, and emergency response services. These services are critical for supporting the pumping, compression, and distribution systems necessary for winter operations. The selected vendor must demonstrate significant experience in servicing large industrial motors and related electrical equipment to ensure minimal downtime during preseason preparation and the active operating season. This contract encompasses preventive maintenance, technical diagnostics, shop services, and field support. Interested parties must submit their proposals by September 16, 2026, with the final award subject to negotiations and approval by the Division.

General Info

New Hampshire seeks vendors for Cannon Mountain snowmaking system maintenance and repair services.

Agency

New Hampshire → Department Of Natural & Cultural ResourcesView Agency

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and MaintenanceView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(2)

IndustrialMotor&ControlsRFP.docx

DOCX

Copy of Snowmaking_Pump_Motor_Offer_Sheet_Template.xlsx

XLSX

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyNew Hampshire → Department Of Natural & Cultural Resources
Contacts1 person available
OfficeN/A
Organization / Agency
New Hampshire → Department Of Natural & Cultural Resources
View Agency Profile
Office AddressN/A
Contacts
Dave WebsterDave Webster
contact@example.gov

Full Description

Show more
The State of New Hampshire, Department of Natural and Cultural Resources, Division of Parks and Recreation (the "State" and "Division"), is seeking written proposals from qualified vendors to provide industrial motor and electrical control maintenance, inspection, diagnostic testing, repair, overhaul, and emergency response services for the snowmaking system at Cannon Mountain Ski Area. The resulting contract shall be drafted and approved by the Division, which reserves the right to make a final award following completion of negotiations. Cannon Mountain operates an extensive snowmaking system that is critical to winter operations and relies on numerous large industrial electric motors and associated electrical control equipment to support pumping, compression, and distribution throughout the mountain. To maintain reliable operation and minimize downtime during both preseason preparation and the operating season, the Division is seeking a vendor with demonstrated experience servicing large industrial motors and related electrical equipment capable of providing preventive maintenance, technical diagnostics, emergency repairs, shop services, and field support as described in this Request for Proposal.

Similar Contracts

Same NAICS industry code

NAICS: 811310
New
SLED
4632 Electric Forklift, Utility Cart, and Golf Cart Repair and Maintenance
Solicitation # 6459
Oregon Metro is soliciting bids under solicitation number 6459 for on-call repair and maintenance services for a variety of equipment. The primary focus of the contract is the diagnostic testing, repair, and maintenance of electric forklifts, utility carts, and golf carts. However, the scope may expand to include other small equipment such as tractors, loaders, excavators, all-terrain vehicles, and riding mowers as requested by the agency. The selected provider will be responsible for providing all necessary parts and labor for both preventative maintenance and general repair services. These services apply to equipment regardless of whether it is currently under warranty. The solicitation was posted on August 27, 2026, and the deadline for responses is September 29, 2026. Performance of these services will take place within the state of Oregon.
Oregon Metro

POSTED

about 11 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 811310
New
1089 – Cafeteria freezer #1 & Cooler #4 Replacement
Solicitation # 26-137
This subcontracting opportunity for the Atterbury Job Corps Center in Edinburgh, Indiana, involves the full removal and replacement of cafeteria walk-in freezer #1 and walk-in cooler #4. The replacements are necessary due to significant frame and door damage on the freezer and a sagging ceiling and operational failures in the cooler. Additionally, the project includes correcting the exit door of the main electrical room to comply with NEC 2020 standards by installing appropriate panic hardware for equipment rated 800A or more. This is a small business set-aside solicitation requiring a single lump sum bid. Prospective bidders must attend a mandatory site visit on September 3, 2026, with proposals due by September 11, 2026. Award will be based on best value, evaluating price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). Requirements include a valid Indiana contractor's license, adherence to Davis-Bacon Act wage determinations, and compliance with EPA and OSHA regulations. The contractor must provide a sequenced construction schedule within 10 days of the Notice to Proceed and start work within 14 days. Final acceptance is contingent upon a substantial completion walk-through, the provision of all operating manuals and training, and a one-year guarantee of workmanship.
Adams & Associates, Inc.

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details
NAICS: 811310
New
Replace Ice-machine in café
Solicitation # 26-138
Adams & Associates, Inc., acting on behalf of the U.S. Department of Labor, is soliciting proposals for the removal and replacement of the existing ice maker at the Atterbury Job Corps Center cafeteria in Indiana. The current unit requires a new evaporator coil and extensive repairs to remain operational, necessitating a full replacement. This solicitation is set aside for small businesses, including SDB, WOSB, HUBZone, and VOSB certifications, under NAICS code 811310. Prospective vendors must attend a mandatory bid conference and site visit on September 3, 2026, at 3:00 PM to be eligible for consideration. Final proposals are due by September 11, 2026, at 3:00 PM. The scope of work includes all construction requirements, adherence to applicable codes, and specific wage determinations. Tammy Swallows serves as the primary point of contact for this project.
Adams & Associates, Inc.

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details
NAICS: 811310
New
Field Disassembly of a WWII Tank Hull at Twentynine Palms, CA
Solicitation # M0026426Q0134
Bastion Supply and Logistics, an SDVOSB small business, is seeking a subcontractor for the field mechanical disassembly of a WWII M4A3 Sherman tank hull at MCAGCC Twentynine Palms in San Bernardino County, California. The scope of work involves the undercarriage removal and recovery of track chains, bogie truck assemblies, road wheels, drive sprockets, an idler, return rollers, a bulldozer mounting arm, and a belly plate over a period of three to five working days. The project requires one oxy-acetylene torch cut on an engine deck door stop, which must be performed by a certified individual with five years of documented experience. All components must be palletized and steel-banded for transport. The contractor is responsible for providing portable sanitation and acting as the generator of record for lead-bearing waste, while Bastion will provide a 35,000 lb forklift and a skid steer. Personnel must possess DBIDS base access, antiterrorism awareness, and complete mandatory briefings on range safety, desert survival, and desert tortoises. This project is subject to the Service Contract Act and DOL Wage Determination 2015-5629, requiring certified payroll. Quotes must be firm not-to-exceed and are due by September 3, 2026, with range availability confirmed from October 31 to December 7, 2026. Any subcontract is contingent upon the award of the prime contract under solicitation M0026426Q0134.
PURECJ HOLDING LLC dba Bastion Supply & Logistics

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 811310
New
SLED
Engine Replacement
Solicitation # IFB 2026-029
The New Orleans Regional Transit Authority in Louisiana has issued an unsealed invitation for bids, identified as IFB 2026-029, for an engine replacement project. This solicitation is currently open for bidding with all transactions conducted in USD. The project is centered in Louisiana, with both billing and shipping designated to 2817 Canal Street, New Orleans, LA 70119. The bidding process began on August 27, 2026. Interested parties must submit any requests for clarification by September 29, 2026, at 2:00 PM. The final deadline for bid submissions is October 6, 2026, at 2:00 PM. Registration and access to bid documents and question responses require a secure login through the procurement portal.
New Orleans Regional Transit Authority

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 811310
New
Federal
16--ELECTRIC BRAKE ACTU, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QSB94
This presolicitation notice from Navsup Weapon Systems Support is for the repair or modification of two electric brake actuators under NSN 7R-1680-015252532-RQ, with delivery terms set as FOB Origin. The government intends to negotiate with a single source under FAR 6.302-1 because the items are flight critical and require specific engineering source approval from the design control activity. Due to the specialized nature of the technical data and manufacturing knowledge required, only previously approved sources have been solicited. Interested parties may submit quotes or capability statements to demonstrate their ability to meet the requirement, but any new source must undergo a rigorous qualification process via the NAVSUP WSS Source Approval Information Brochures. The government retains full discretion on whether to compete the procurement based on the responses received. Proposals must be submitted within the specified timeframe, and failure to provide all required source approval data will result in disqualification from the award.
Navsup Weapon Systems Support

POSTED

about 23 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 811310
New
Federal
Air Compressor Maintenance
Solicitation # PANNGB-26-P-0000-038241
Solicitation PANNGB-26-P-0000-038241 is a request for quotations for air compressor annual maintenance services for the NJ Air National Guard 177th Fighter Wing. The scope of work includes bi-annual preventative maintenance and quarterly air samples, structured across a base year and four optional years. This is a 100 percent small business set-aside under NAICS code 811310, and the resulting contract will be a firm-fixed-price award. Quotes must be submitted by September 2, 2026, at 1:00 PM EST to the designated contracting officials. To be eligible, offerors must be registered in the System for Award Management. The government will evaluate proposals based on a combination of total evaluated price and past performance, as recorded in the Supplier Performance Risk System. Award decisions will be based on the best value to the government, with a preference for the lowest-priced offeror that demonstrates substantial performance confidence.
W7NP Uspfo Activity Njang 177

POSTED

about 23 hours ago

DEADLINE

in 5 days
View Details
NAICS: 811310
New
Federal
Halon 1211 Fire Extinguisher Mx
Solicitation # FA488726Q0048
Luke AFB is soliciting proposals for a firm-fixed price contract to provide complete inspection, maintenance, and servicing of up to 175 56 MXG flightline wheeled Halon 1211 fire extinguishers, including all personnel, equipment, tools, materials, and labor required to perform the work in accordance with the statement of work. The contract is structured with a base year and three optional one-year periods, and is exclusively set aside for total small businesses under the SBA program. All submitted quotes must include every applicable cost, and proposals must be emailed to Velma Wynn and Kristie Canterbury no later than September 7, 2026, at 3:00 PM EST. Questions regarding the solicitation must be submitted by 9:00 AM MST on August 17, 2026, exclusively to the listed points of contact, and all inquiries and responses will be shared publicly to ensure fairness among offerors. Funds are not currently available, and no award will be made until funding is secured; the government retains the right to cancel the solicitation at any time without obligation to reimburse offerors for any incurred costs.
FA4887 56 Cons Cc

POSTED

about 23 hours ago

DEADLINE

in 17 days
View Details
NAICS: 811310
New
Federal
J079--PM&R Svc for Floor Cleaning Equipment
Solicitation # 36C26226Q1421
The Department of Veterans Affairs is conducting market research through a sources sought announcement to identify qualified small businesses capable of providing preventative maintenance and repair services for floor cleaning equipment at the Phoenix VA Health Care System. The contractor will be responsible for providing all labor, materials, and technical expertise to perform quarterly comprehensive maintenance and as-needed repairs for various equipment types, including handheld floor machines, burnishers, and scrubbers from multiple vendors such as Advance, Nilfisk, and Tennant. This notice is for research purposes only and does not constitute a solicitation or a commitment to award a contract. The government is specifically seeking interest from Service-Disabled Veteran Owned Small Businesses, though other small business categories may be considered. Interested parties must be registered in the System for Award Management and the SBA-Dynamic Small Business Search Registry. Responses, including a detailed capability statement and company identification data, must be submitted to the designated contracting specialists by 10:00 AM MST on September 1, 2026. The acquisition falls under NAICS code 811310 with an estimated value of 12.5 million dollars.
262-NETWORK Contract Office 22 (36C262)

POSTED

about 23 hours ago

DEADLINE

in 4 days
View Details
NAICS: 811310
New
Federal
Repair Power Lab Air Compressor
Solicitation # 70Z03926QCGA00031
The contractor is required to perform comprehensive repair services on an Ingersoll Rand Model R5.5i-A125 air compressor located in McAllister Hall at the United States Coast Guard Academy in New London, Connecticut. This includes full responsibility for all labor, materials, equipment, transportation, and supervision needed to restore the unit to operational condition. Key tasks involve executing lockout/tagout procedures, replacing critical components such as the cooling fan, inlet valve, unload solenoid, blowdown valve, air filter, oil filter, air/oil separator, and drive belt, as well as removing and analyzing an oil sample and replacing the oil. Additional duties include inspecting the scavenge line, cleaning the coolers and panel filter, greasing the motor if applicable, and conducting thorough operational tests to confirm proper function before returning the compressor to service. This work is solicited under the contract title Repair Power Lab Air Compressor, with solicitation number 70Z03926QCGA00031, issued on August 10, 2026, and responses due by August 31, 2026. The opportunity is designated as a Small Business Set Aside under NAICS code 811310 and is administered by the Department of Homeland Security through the Coast Guard Academy, with the place of performance specified in New London, Connecticut, and the contracting office located in Groton. Primary point of contact is Kayla Rex, reachable via email and phone, with Jason M. Askeew listed as secondary contact. All work must be performed on-site at the designated facility, and successful performance requires strict adherence to safety protocols and operational standards to ensure the compressor meets mission-critical requirements.
Cg ACADEMY(00039)

POSTED

about 23 hours ago

DEADLINE

in 3 days
View Details
NAICS: 811310
New
Federal
Ranger Maintenance Support Kit
Solicitation # W911S226U4302
The Department of Defense, specifically the W6QM Micc-Ft Drum office located in Fort Drum, New York, is soliciting bids for a Ranger Maintenance Support Kit under solicitation number W911S226U4302. This requirement is for one unit of a brand name or equal kit, specifically referencing Darley Part Number SOSCSTK. The contract is designated as a total small business set-aside under NAICS code 811310, with the place of performance located in zip code 31905. Interested parties must submit their responses through the PIEE system by the deadline of September 2, 2026. Proposals will be evaluated based on price and technical factors, and submissions must include required certifications and a country-of-origin attachment. The primary point of contact for this procurement is Jackson Oreilly.
W6QM Micc-Ft Drum

POSTED

about 23 hours ago

DEADLINE

in 5 days
View Details
NAICS: 811310
New
Federal
Area of Interest (AoI) – Pad Mount Transformer & Voltage Regulator Inspection and Repair (CSO-W911KF25SC002)
Solicitation # W911KF25SC002-AoI0012
The U.S. Army Contracting Command – Anniston Army Depot (ACC-ANAD) is seeking qualified contractors to inspect and evaluate single-phase and three-phase pad-mount transformers and voltage regulators to determine whether each unit should be repaired or retired. The work involves comprehensive physical and electrical testing, including Turns Ratio Test, Megger insulation resistance, impedance, and load/no-load watts, to assess the condition of equipment listed in Attachment Aol0012. Contractors must provide a detailed report per unit including nameplate data, test results, and a clear recommendation for repair or retirement, accompanied by a detailed cost estimate for any recommended repairs. All work must comply with industry standards such as IEEE C57.12.34, ANSI/ASTM D3487 for PCB-free transformer oil, and DOT regulations for transportation. The oil used must be new, non-reprocessed, and certified to contain less than 50 ppm of PCBs, and repaired units must be painted olive green with the kVA rating clearly displayed in three-inch letters. A bayonet-type fuse must be installed with a label instructing venting prior to removal. The contract will include one base year and four option years, with performance taking place at the Anniston Army Depot in Alabama, where all equipment will be delivered and inspected. The solicitation, identified as W911KF25SC002-AoI0012, is open for submissions through SAM.gov with a deadline of August 28, 2026. Proposals must be submitted electronically and are evaluated on a best-value basis considering technical merit, mission relevance, and cost reasonableness, without a preference for lowest price technically acceptable. The technical proposal must be submitted separately from the price proposal, with the former containing no cost information and the latter itemizing all fees and charges. Offerors must be registered in SAM.gov with an active Unique Entity ID and CAGE code, and must also register in the Procurement Integrated Enterprise Environment (PIEE) system to receive payments. Contractors must self-certify their small business status, be free from suspension or debarment, and ensure submissions are unclassified. Foreign-owned firms may respond provided they can obtain necessary security approvals. The contract requires a minimum three-year warranty on all materials and workmanship, use of new or OEM-equivalent replacement parts, and adherence to prescribed labeling and marking standards. No formal contract clauses, attachments with page counts, or detailed CLINs are provided; however, the
W6QK Acc Anad

POSTED

about 23 hours ago

DEADLINE

in 14 days
View Details