Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Industrial Wastewater Treatment Plant Operations & Maintenance

Active

Federal

Response Deadline08/07/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires full 24/7 operation, maintenance, and regulatory compliance for an industrial wastewater pre-treatment plant located in Fort Worth, Texas, with a zip code of 76131. Responsibilities include continuous monitoring of wastewater parameters, precise chemical dosing to meet treatment standards, and immediate emergency response to system failures or compliance breaches. The work demands round-the-clock staffing and technical expertise to ensure the facility remains in full adherence to environmental regulations and operational efficiency at all times. This is a subcontract under NAICS code 221320, issued by the Office of the Chief Procurement Officer within the Department of the Treasury, with a response deadline of August 7, 2026, at 9:00 PM. The contract does not specify a set-aside classification, and no point of contact information is provided. Performance is strictly tied to the Fort Worth location, and the successful bidder must be prepared to manage all aspects of plant functionality without interruption, including recordkeeping, reporting, and coordination with regulatory authorities to maintain compliance and prevent environmental violations.

General Info

24/7 operation and compliance for wastewater plant in Fort Worth, Texas, with continuous monitoring and emergency response.

Agency

Department Of The Treasury → Office Of The Chief Procurement OfficerView Agency

NAICS

221320 - Sewage Treatment FacilitiesView NAICS

Place of Performance

Fort Worth, TX, 76131, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 7

Submission deadline

Response Deadline

08/07/2026, 09:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Treasury → Office Of The Chief Procurement Officer

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of The Treasury → Office Of The Chief Procurement Officer

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide 24/7 operation, maintenance, and compliance for the industrial wastewater pre-treatment plant, including monitoring, chemical dosing, and emergency response.

Similar Contracts

Same NAICS industry code

Sewer System Management PlanThe City of Industry in California has issued a forecast for a 2026 Sewer System Management Plan, aimed at ensuring the long-term efficiency, compliance, and sustainability of its municipal sewer infrastructure. This initiative is set to be managed by the Director of Public Works, Mathew Hudson, who serves as the primary point of contact for all inquiries and coordination efforts. The plan will focus on maintaining, upgrading, and regularly monitoring the existing sewer system to meet environmental regulations, public health standards, and operational reliability objectives within the city limits, specifically in the 91744 zip code area. Although the solicitation number and details such as NAICS code or set-aside provisions are not yet defined, the forecast indicates a planned procurement process will follow to secure qualified professionals or firms to develop and implement the comprehensive management strategy. The project is scheduled to be formally posted on July 27, 2026, and will likely involve stakeholder engagement, infrastructure assessments, regulatory compliance planning, and reporting mechanisms aligned with state and federal guidelines. The plan is expected to address aging infrastructure, stormwater interception, system capacity optimization, and pollution prevention. The City of Industry is seeking expertise to deliver a detailed roadmap with timelines, budget estimates, and performance metrics that will guide operations for years to come. While the full scope and funding mechanism are not yet public, the forecast signals a proactive approach to municipal utility management and sets the foundation for a competitive and transparent procurement process later in 2026.

City of Industry

POSTED

DEADLINE

W684Q-241334 - Pumping EffluentThe Government of Canada, through the Department of Public Works and Government Services, is soliciting offers for the pumping and transportation of effluent from various waste collection systems including septic tanks, lift stations, grease traps, above and below ground holding tanks, and ship holding tanks at Canadian Forces Base Esquimalt and Ranch Point Winchelsea Island Nanoose Bay Nanaimo in British Columbia. The contract requires full provision of labour, tools, materials, specialized equipment, and transportation services, with particular emphasis on the supply and operation of hydro excavation trucks to support efficient and safe waste removal. All work must be performed at the designated locations within British Columbia, and bidders must demonstrate capability to meet operational demands across multiple sites under strict environmental and safety standards. The solicitation number is WS4748092247, classified under NAICS code 221320 for wastewater collection and treatment, with a posted date of July 27, 2026 and a response deadline of August 4, 2026 at 4:30 PM Pacific Time. The contract is open to all qualified offerors with no set aside specified and falls under federal procurement rules. Primary point of contact for inquiries is Nicki Arrieta, Contracting Authority, reachable via email at nicki.arrieta@tpsgc-pwgsc.gc.ca. Bidders are expected to fully understand the scope of services, location constraints, and regulatory requirements inherent to working at Defence department facilities in this region.

Department of Public Works and Government Services

POSTED

DEADLINE

Subcontractor for Small or DVBE Participation (Bid Incentive Optimization)A subcontracting opportunity is available for Small Business, Minority Business, or Disabled Veteran Business Enterprise-certified firms to partner with a prime contractor seeking to qualify for a 5% price credit under the California Department of Fish and Wildlife’s incentive program. To be eligible, the certified firm must perform actual work or supply materials directly related to the project, ensuring genuine participation rather than passive designation. The solicitation is tied to a contract under NAICS code 221320 and requires performance in Fresno, California. Interested firms must submit their responses by August 11, 2026, at 10:00 PM Pacific Time, with the opportunity posted on July 25, 2026. This contract is structured to support state goals for diversity and inclusion in public contracting by enabling certified businesses to contribute meaningfully to qualifying projects, thereby helping primes access financial incentives while promoting meaningful economic inclusion.

California Department of Fish & Wildlife

POSTED

DEADLINE

Water Treatment Plant Semi-Monthly Maintenance ServicesThe contract requires the provision of 72 scheduled maintenance visits at the San Joaquin Hatchery water treatment plant, with services to be performed twice each month over the course of the agreement. These visits encompass comprehensive inspection, servicing, and operational assurance of all plant equipment to maintain safe and efficient functioning. The contractor is fully responsible for supplying all labor, tools, materials, and performing post-service cleanup without additional cost to the client. This effort supports the ongoing operations of a critical water treatment facility managed by the California Department of Fish & Wildlife. Work is to be performed at the facility located in Fresno, with all tasks aligned to ensure regulatory compliance and uninterrupted service. The procurement is categorized as a subcontract under NAICS code 221320, relating to water and wastewater treatment, and was posted on July 25, 2026, with a response deadline of August 11, 2026, at 10:00 p.m. Pacific Time. While the solicitation number is not provided, the procurement is accessible via the CalE-Procure platform. The agency, California Department of Fish & Wildlife, is seeking qualified contractors capable of delivering consistent, high-quality maintenance services without disruption to hatchery operations, emphasizing reliability, technical expertise, and adherence to operational protocols.

California Department of Fish & Wildlife

POSTED

DEADLINE

Water Service Line ReplacementThe contract involves the replacement of a 4-inch water service line, requiring trenching for access, installation of new piping, pressure testing to ensure integrity, and final connection to the existing water distribution system. All work must comply with industry standards for water infrastructure and ensure safe, uninterrupted service post-installation. The project is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to bid, and it is NAICS-coded as 221320 for Water Distribution Systems. The opportunity is posted by the International Boundary and Water Commission: U.S.-Mexico, indicating the work may relate to border region infrastructure needs. Responses must be submitted by August 8, 2026, with no specific location provided in the data, but performance is expected to occur at a site under the agency’s jurisdiction, likely near the U.S.-Mexico border.

Internat Boundary And Water Commission

POSTED

DEADLINE

Potable Water Treatment System MaintenanceThe contract entails annual on-site inspection, testing, and maintenance of the potable water system at the US Embassy in Podgorica to ensure adherence to health and safety standards, specifically targeting turbidity, chlorine levels, and LSI balance. The work requires comprehensive evaluation and servicing of the water treatment infrastructure to maintain safe drinking water quality for embassy personnel and operations. In addition to technical maintenance, the contract mandates the training of embassy staff on proper system operation and safety protocols, along with the submission of detailed service reports documenting all testing results, corrective actions taken, and compliance verification. The solicitation is classified as a subcontract under NAICS code 221320, and responses are due by August 17, 2026. The work must be performed at the embassy's location in Podgorica, Montenegro, with a postal code of 81000. The contracting entity is the US Embassy Podgorica under the Department of State, and the requirement is positioned to support the ongoing operational readiness and health compliance of the diplomatic mission. No set-aside status is specified, and the opportunity is accessible to qualified subcontractors who can meet the technical, reporting, and training obligations outlined in the scope.

US Embassy Podgorica

POSTED

DEADLINE

Water Distribution and Utility InfrastructureThe contract involves the installation and improvement of water distribution systems, requiring careful coordination with SDG&E and SoCalGas to ensure seamless integration with existing utility infrastructure. Work must be executed in alignment with utility protocols and timelines to avoid disruptions and maintain public safety. The project is classified under NAICS code 221320, indicating it pertains to water supply and irrigation systems, and is structured as a subcontract under Orange County’s authority in California. All activities are to be performed within the service area governed by the county, though specific location details are not provided. The contract was posted on July 24, 2026, and further information can be accessed via the provided official link.

POSTED

DEADLINE

Waterline Installation (8" C900 PVC Pipe)The contract calls for the installation of 2,450 linear feet of 8-inch C900 PVC water main, encompassing all associated work including proper bedding, backfilling, and pressure testing to ensure system integrity. The project is classified as a subcontract under NAICS code 221320, indicating it falls within the water and sewer line and related structures construction category. Performance is required in Charleston, West Virginia, with the solicitation posted on July 24, 2026, and responses due by August 4, 2026, at 5:30 PM. The contracting authority is the state of West Virginia, though no specific agency or office address details are provided. The work must meet standard industry practices for water main installation, with an emphasis on compliance with pressure testing protocols to verify leak-free operation upon completion.

POSTED

DEADLINE

Wastewater System Design (Wet Well & Force Main)The contract entails the design of wastewater collection system components specifically focused on wet wells and force mains, encompassing pump selection, pressure calculations, and associated engineering analyses required for reliable operation. The scope includes all technical aspects necessary to ensure proper hydraulic performance, structural integrity, and compliance with industry standards for municipal wastewater conveyance infrastructure. Issued by the Bulloch County Board of Commissioners in Georgia, this subcontract opportunity was posted on July 23, 2026, with a response deadline of August 25, 2026. It falls under NAICS code 221320, classifying it as wastewater treatment and sewage disposal services. The place of performance and specific location details are not specified, but the work is tied to Bulloch County's sanitation infrastructure needs. All proposals must be submitted before the stated deadline to be considered for award.

Bulloch County Board of Commissioners

POSTED

DEADLINE

Wastewater Treatment Plant Operations & MaintenanceThe contract encompasses the full lifecycle maintenance and operational support for wastewater treatment systems, covering mechanical, biological, and chemical processes essential to daily plant functionality. This subcontract is issued under the NAICS code 221320 and is managed by Navfacsyscom Far East under the Department of Defense, with performance expected to occur in the Far East region. The solicitation was posted on July 23, 2026, and responses are due by September 3, 2026, at 5:00 a.m. The scope requires continuous system reliability, compliance with environmental standards, and expert oversight of all treatment stages, ensuring uninterrupted operations and optimal output quality under military and regulatory requirements.

Navfacsyscom Far East

POSTED

DEADLINE

in about 1 month

Maintenance, Repair, And Operation Of Incinerator Plant, Weight Scales, Potable Water Tanks, Wastewater Treatment Plants To Include Operation, And Granular Activated Carbon (GAC) Filtering Systems at CFA YokosukaThis is an indefinite delivery/indefinite quantity (IDIQ) service contract solicitation for the maintenance, repair, and operation of critical infrastructure at Commander Fleet Activities Yokosuka, Japan, including the incinerator plant, vehicle weight scales, potable water tanks, wastewater treatment plants, and granular activated carbon (GAC) filtering systems. The contractor must provide all labor, supervision, tools, materials, equipment, facilities, transportation, and incidental engineering required to ensure continuous and compliant operation of these systems as outlined in the Performance Work Statement (PWS), which is designated as Controlled Unclassified Information (CUI) and accessible only through SAM.gov. The solicitation, issued under NAICS code 221320 by Naval Facilities Engineering Systems Command Far East under the Department of Defense, was posted on July 23, 2026, with proposals due by September 3, 2026, and is administered from a military postal address in FPO, AP 96349-0013. There is no specified contract value, base period, or option periods disclosed, but the IDIQ structure implies potential for multiple task orders over time under a ceiling amount not made available in the public solicitation. All performance and technical requirements are governed exclusively by the CUI-restricted PWS, which contains comprehensive specifications for system operation, inspection criteria, quality standards, packaging, marking, and bar-coding, including any applicable MIL-STD references. The place of performance is firmly established at CFA Yokosuka, and while inspection and acceptance locations are implied to be on-site, the responsible parties for these functions are not explicitly stated. No payment office details, accounting codes, invoicing methods, or names of contracting officers or technical representatives are provided, and the evaluation factors for award, including whether the selection will be based on lowest price technically acceptable or trade-off, are also not included in the accessible documentation. The contract requires strict adherence to CUI handling protocols, and while no specific security clearances are mentioned, access to the PWS and performance at a military facility necessitate compliance with Department of Defense information handling standards. Offerors must access the full solicitation package via SAM.gov and submit proposals electronically through authorized federal portals, with no physical submissions indicated, and must comply with all federal representation and certification requirements applicable to defense contracts, although no offeror-specific certifications or size status have been disclosed in the public record.

Navfacsyscom Far East

POSTED

DEADLINE

in about 1 month

Pipeline Testing, Disinfection, and CommissioningThe contract entails comprehensive potable water system commissioning activities including hydrostatic testing, chlorination, flushing, bacteriological sampling, and system tie-in operations to ensure regulatory compliance and public safety. These services are critical for verifying the integrity and sanitation of newly installed or repaired water pipelines prior to operational use. The work is designated under NAICS code 221320, indicating it falls within the water supply and irrigation systems category, and is structured as a subcontract with performance required in Rancho Cucamonga, California. The project is managed by the Cucamonga Valley Water District and was posted on July 23, 2026, with no solicitation number provided. There is no set-aside designation or organizational type specified, and no point of contact details are listed. All activities must align with state and local water quality standards, and the successful bidder will be responsible for executing each phase of commissioning with attention to safety protocols, documentation, and timely delivery. The official project link directs to the CEQA Net portal for additional public records and environmental compliance information.

Cucamonga Valley Water District

POSTED

DEADLINE

More opportunities from Department Of The Treasury → Office Of The Chief Procurement Officer

Same awarding agency

Amendment 00001 Request for Quote (RFQ) 2031ZA26Q00102 for Fourier Transform Infrared (FTIR) MicroscopeAmendment 00001 to Request for Quote 2031ZA26Q00102 addresses inquiries from vendors regarding the solicitation for a Fourier Transform Infrared (FTIR) Microscope, providing clarifications and updates to ensure all respondents have consistent and accurate information. The solicitation is designated as a Small Business Set Aside - Total, under NAICS code 334516, reserving the opportunity exclusively for small businesses. The action was posted on July 29, 2026, with a strict response deadline of July 31, 2026, at 6:00 p.m. Eastern Time, requiring all submissions to be completed within this narrow window. The contracting activity falls under the Office of the Chief Procurement Officer within the Department of the Treasury, with performance expected in Washington, D.C., at a ZIP code of 20228. Primary point of contact for inquiries is Naweed Nezam, reachable via email at Naweed.Nezam@treasury.gov, and all official communications and documentation are accessible through the provided SAM.gov link.

Analytical Laboratory Instrument Manufacturing

POSTED

about 4 hours ago

DEADLINE

NOTICE OF INTENT TO AWARD SOLE SOURCE - BEP SPARE PART # ELP1414 - BOARD, TRACKINGFRAMEThe Treasury Common Services Center - Acquisition Services, acting on behalf of the Office of Supply Chain Management, intends to award a sole-source, firm-fixed-price contract for the BEP Spare Part ELP1414, a Tracking Frame board manufactured by Atlantic Zeiser with part number HEAB010000480 and KBA order number SP34780-EAB010000480, identified as SMARTSKIP BOX PARTS Figure/Item 7.3.38, at a quantity of one per block. The contract will be awarded exclusively to Zeiser, Inc., under the authority of FAR 13.106-1(b)(1), using FAR Part 12 procedures for commercial product acquisitions, with no competitive solicitation planned unless information received necessitates reconsideration. All responses must be submitted in writing via email to melva.robinson@treasury.gov and naweed.nezam@treasury.gov no later than 12:00 PM Eastern Standard Time on August 5, 2026. Only entities currently active in the System for Award Management (SAM) are eligible to respond, and any costs incurred in preparing or submitting information are the sole responsibility of the respondent, with no reimbursement from the government. The procurement is managed under solicitation number 2031ZA26N00050, with the primary point of contact located in Washington, D.C., and the place of performance designated as Fort Worth, Texas, 76131.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 4 hours ago

DEADLINE

Spare Parts Inventory & Supply ManagementThe contract requires the maintenance and regular reporting of semi-annual inventories of spare parts specifically for wastewater treatment equipment, with responsibilities including sourcing components and managing the associated logistics to ensure continual operational readiness. The work is focused on supporting critical infrastructure within the wastewater treatment sector and demands precise tracking, timely procurement, and reliable supply chain coordination to prevent equipment downtime. The opportunity is structured as a subcontract under the Office of the Chief Procurement Officer within the Department of the Treasury, with performance required at a location in Fort Worth, Texas, zip code 76131. It is classified under NAICS code 423690 for other industrial machinery and equipment merchant wholesalers. The solicitation was posted on July 28, 2026, and responses are due by August 7, 2026, with no set-aside provisions or additional eligibility criteria specified.

Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

DEADLINE

Electronic & Instrumentation MaintenanceThe contract pertains to the calibration and maintenance of electronic instrumentation including pH probes, flowmeters, and associated control systems, all to be performed in accordance with original equipment manufacturer procedures. The work is classified under NAICS code 811212 and issued as a subcontract by the Office of the Chief Procurement Officer within the Department of the Treasury, with performance requirements centered in Fort Worth, Texas, at the zip code 76131. The solicitation was posted on July 28, 2026, and responses must be submitted by August 7, 2026, at 9:00 p.m. Eastern Time, with no set-aside provisions specified. All maintenance activities must adhere strictly to OEM standards to ensure accuracy, reliability, and compliance with operational specifications for the instruments involved.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Waste Sludge Packaging, Labeling & Drum ManagementThe contract pertains to the packaging, labeling, and management of drums containing nonhazardous wastewater sludge, requiring strict adherence to all applicable storage and transport regulations. Key responsibilities include drum filling, accurate labeling, palletizing, and repackaging operations to ensure compliance and safe handling throughout the process. The work is designated for performance at Fort Worth, Texas, with the specific zip code 76131 as the place of performance. This is a subcontract opportunity posted on July 28, 2026, with a response deadline of August 7, 2026. The North American Industry Classification System code 562998 applies, indicating it falls under other waste management services. The contracting entity is the Office of the Chief Procurement Officer under the Department of the Treasury, though no set-aside type or point of contact information is provided.

All Other Miscellaneous Waste Management Services

POSTED

DEADLINE

Chemical Supply for pH Neutralization & CoagulationThe contract titled Chemical Supply for pH Neutralization & Coagulation seeks the provision of specialty chemicals including calcium chloride, sulfated castor oil, and various acids essential for wastewater treatment operations. These chemicals will support critical processes such as pH adjustment and coagulation to ensure compliance with environmental and operational standards at the designated performance location in Fort Worth, Texas, with a ZIP code of 76131. The solicitation is structured as a subcontract under NAICS code 325992, indicating it pertains to other chemical preparation and compounding activities, and is managed by the Office of the Chief Procurement Officer within the Department of the Treasury. The opportunity was posted on July 28, 2026, with a response deadline of August 7, 2026, at 9:00 PM Eastern Time, leaving interested parties approximately ten days to prepare and submit proposals. There is no set-aside designation listed, meaning the contract is open to all qualified suppliers regardless of business size or ownership category. While no specific point of contact is provided, the contract details can be accessed through the official SAM.gov platform using the provided UI link. All technical specifications, delivery schedules, quality requirements, and compliance terms are implied to be detailed in supplementary documentation submitted by the offering parties.

Photographic Film, Paper, Plate, Chemical, and Copy Toner Manufacturing

POSTED

DEADLINE

Logistics and Distribution SupportThe contract awards logistics and distribution support for the transportation, warehousing, and final delivery of potentiometer parts to BEP facilities, with specific handling required at both DCF and Landover Warehouse. The scope encompasses end-to-end coordination of freight movement, storage, and delivery operations to ensure timely and secure movement of sensitive components within the designated facility network. All activities must comply with strict logistical standards and scheduling requirements to support uninterrupted production workflows at the BEP sites. This is a Small Business Set Aside under NAICS code 493110, exclusively available to qualified small businesses, and is issued by the Office of the Chief Procurement Officer within the Department of the Treasury. The place of performance is centered at Washington, DC, with a ZIP code of 20228, indicating the primary operational focus is in the capital region. Bids are due by August 3, 2026, and the opportunity was posted on July 28, 2026, giving interested parties approximately one week to prepare and submit proposals. The contract type is classified as a subcontract, suggesting it supports a larger prime agreement under the Treasury's procurement framework.

General Warehousing and Storage

POSTED

DEADLINE

Supply of Crown M1501208513A Potentiometer PartsThe contract is for the supply of original Crown M1501208513A potentiometer parts to ensure uninterrupted operations at facilities operated by the Bureau of Engraving and Production. It is structured as a subcontract under a Small Business Set Aside designation, meaning only eligible small businesses may respond. The North American Industry Classification System code is 334516, which corresponds to the manufacturing of search, detection, navigation, guidance, aeronautical, and naval systems. The solicitation was posted on July 28, 2026, with a mandatory response deadline of August 3, 2026, at 6:00 PM. Performance will occur at a location in Washington, D.C., with a zip code of 20228. The contract is managed by the Office of the Chief Procurement Officer under the Department of the Treasury, and the requirement is critical to maintaining operational continuity at key government facilities.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Supply of Crown ZZ SLA6200 Potentiometer PartsThe contract requires the delivery of genuine Crown ZZ SLA6200 potentiometers to support maintenance operations at the BEP facility, with a strict emphasis on maintaining system integrity and ensuring compliance with warranty requirements. Only authentic parts are acceptable to guarantee performance and longevity of the equipment being serviced. The solicitation is designated as a Small Business Set Aside under the SBA program, indicating that only small businesses are eligible to bid, and it is classified under NAICS code 334516 which pertains to the manufacturing of electronic components and accessories. The offer deadline is August 3, 2026, at 6:00 PM, with the contract posting date listed as July 28, 2026. Performance of the work is to be carried out at a location in Washington, DC, with a ZIP code of 20228. The contracting authority is the Office of the Chief Procurement Officer within the Department of the Treasury, and the procurement is structured as a subcontract.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Supply of Crown YA CRO77084-301-88 Potentiometer PartsThe contract entails the supply of authentic Crown YA CRO77084-301-88 potentiometers that fully comply with original manufacturer specifications, intended for integration into BEP systems. All components must meet stringent authenticity and performance standards to ensure compatibility and reliability within critical operational environments. The solicitation is designated as a Small Business Set Aside, total, under NAICS code 334516, emphasizing support for small businesses in fulfilling this procurement. The opportunity was posted on July 28, 2026, with a response deadline of August 3, 2026, at 6:00 PM Eastern Time, requiring timely submission of proposals from eligible vendors. Performance of the contract is centered in Washington, with a zip code of 20228, indicating the primary location for delivery and potential oversight. The procuring entity is the Office of the Chief Procurement Officer within the Department of the Treasury, underscoring the federal nature and importance of the components being sourced. While no specific point of contact is listed, interested parties can access detailed solicitation information through the provided SAM.gov link. Participation is restricted to qualified small businesses, and adherence to the manufacturer’s exact specifications is mandatory to ensure seamless integration into existing BEP infrastructure.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Supply of Crown CR813533 Potentiometer PartsThe contract is for the procurement and delivery of genuine Crown CR813533 potentiometer parts that must fully comply with original equipment manufacturer specifications for use within systems at the BEP facility. These components are critical to maintaining operational integrity and require strict adherence to OEM standards to ensure compatibility, performance, and reliability in mission-critical applications. The contract is structured as a subcontract under a Small Business Set Aside designation, ensuring eligibility and preference for qualified small businesses, and is classified under NAICS code 334516, which pertains to other electronic component manufacturing. The solicitation was posted on July 28, 2026, with a firm response deadline of August 3, 2026, at 6:00 PM. Performance of the contract is centralized at the Washington, D.C. location with a zip code of 20228, indicating delivery and potential installation or integration at a federal facility under the Department of the Treasury. The Office of the Chief Procurement Officer is the overseeing agency, and while no specific point of contact is listed, all submissions must be made through the designated SAM.gov portal referenced in the posting. The requirement emphasizes authenticity of parts and precise compliance, with no tolerance for substitutions or non-OEM equivalents.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Notice of Intent to Award Brand NameThe U.S. Department of the Treasury, through the Office of the Chief Procurement Officer, intends to award a sole-source, firm-fixed-price contract for bench stock potentiometer parts including Crown CR813533, YA CRO77084-301-88, ZZ SLA6200, and M1501208513A under FAR 6.302-1(a)(2)(ii)(b), justified by the necessity to maintain compatibility with existing equipment, ensure operational continuity, and preserve OEM warranty coverage. This acquisition is designated as a total small business set aside, restricted to registered small businesses in SAM, with no competitive solicitation issued. Responses must be submitted exclusively via email to Marc.Curry@treasury.gov by 2:00 PM Eastern Time on August 3, 2026, and no cost estimates or pricing details are provided as this is a pre-award notice. The place of performance is Washington, D.C., 20228, with distribution likely routed through DCF and Landover Warehouse facilities, though no formal delivery schedule, FOB terms, or period of performance are specified. Packaging, marking, and inspection criteria are not detailed beyond the requirement that only genuine Crown-branded parts be delivered, with conformance to OEM specifications serving as the de facto quality standard. No formal attachments, contract clauses with alternates, or detailed administrative data such as payment offices, invoicing systems, or contracting officer representatives are included, and respondents are not reimbursed for submission-related costs.

Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

POSTED

DEADLINE