Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Government of Canada was posted on July 7, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Installation Services for Government Office Furniture

Closed
International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238290
New
Centennial JCC Panic Hardware Services (Electrical Room Egress Doors)
Solicitation # Panic Hardware (Electrical Room Egress Doors)
Management & Training Corporation is soliciting bids for a fee-for-service subcontract to provide panic hardware installation services for electrical room egress doors at the Centennial Job Corps Center in Nampa, Idaho. The project requires the contractor to bypass internal lock mechanisms and install Grade I commercial-grade panic bars, exterior trim, rim cylinders, strikes, and door closers at five specific locations: the Cafeteria, Men's Dorm, Women's Dorm, Recreation, and Vocational buildings. All installations must ensure doors open in the direction of exit travel under simple pressure and must comply with NEC 2023 Article 110.26(C)(3), NFPA 101 Life Safety Code, and the Americans with Disabilities Act. Performance verification requires a minimum of 10 consecutive cycle tests to ensure fail-safe operation. Eligible bidders must be licensed in the State of Idaho and provide a lump sum price for the project. This is a small business set-aside opportunity open to various SBA certifications, including VOSB, SDVOSB, WOSB, and HUBZone. Required submission documents include a bid sheet, a completed supplier packet with a W-9 and self-certification form, and three references, all due by December 1, 2026. The contract is subject to federal regulations, including the Davis-Bacon Act for prevailing wages, FAR clauses regarding the combating of trafficking in persons, and strict security requirements for protecting sensitive government information. Final award will be based on the best value as determined by MTC.
Management & Training Corporation/Centennial Job Corps Center

POSTED

about 8 hours ago

DEADLINE

in about 1 month
NAICS: 238290
New
Federal
Vertical Transportation Equipment (VTE) Maintenance, Repair, & Inspection Services
Solicitation # FA446027Q0005
Solicitation FA446027Q0005 is a total small business set-aside for a non-personal services contract to provide comprehensive management, tools, supplies, equipment, parts, and labor for the maintenance, repair, and inspection of vertical transportation equipment at Little Rock Air Force Base, Arkansas. The scope of work specifically covers six traction elevators and eleven hydro/electric elevators, with potential requirements for escalators, wheelchair lifts, dock levelers, and dumbwaiters. The contractor must be licensed in Arkansas and adhere to ASME, NFPA, and OSHA standards, maintaining a 95 percent operational time goal through a written Maintenance Control Program. Service requirements include fire service inspections every 30 days, a 24-hour response time for routine calls, and a 2-hour in-person response for emergency calls. The contract is structured as a firm-fixed-price arrangement consisting of a base year starting December 1, 2026, followed by four option years and a final six-month extension ending May 31, 2032. Award will be made to the responsible offeror determined to be most advantageous to the government, based on a sequential evaluation of price and past performance, requiring at least two years of similar experience within the last four years. Contractors must comply with CMMC Level 1 and DFARS cybersecurity requirements, as well as Service Contract Act wage determinations for the local Arkansas region. All payment requests must be processed electronically via Wide Area WorkFlow.
FA4460 19 Cons Pka

POSTED

about 18 hours ago

DEADLINE

in 20 days
NAICS: 238290
New
Federal
N099--JLM Roll Up Door Replacement
Solicitation # 36C25627Q0092
Solicitation 36C25627Q0092 is a combined synopsis and request for quote issued by the Department of Veterans Affairs for the replacement of a motorized roll-up door at the John L. McClellan Veterans Hospital. This is a 100% set-aside for certified Service-Disabled Veteran-Owned Small Businesses (SDVOSB) under NAICS code 238290. The project requires the contractor to provide all labor, tools, and equipment, including a scissor lift and forklift, to remove and dispose of the existing door and install one grey 7 by 9 foot motorized rolling steel rapid slat door with insulated slats and an obstruction safety device. The award will be a firm-fixed-price contract with a performance period of 30 days from the Notice to Proceed and includes a one-year warranty. The government will utilize the Lowest Price Technically Acceptable (LPTA) evaluation process, focusing on technical capability, price reasonableness, and the completion of the VA Notice of Limitations on Subcontracting. Interested offerors must submit a three-volume quote package consisting of technical capabilities, a completed price schedule, and the required VAAR certification. Quotes must be emailed to Joseph Warren by 3:00 PM CST on November 18, 2026. A site visit is scheduled for November 6, 2026, at 10:00 AM, and all inquiries must be submitted by November 10, 2026. Performance will take place at the Central Arkansas Veterans Healthcare System in North Little Rock, Arkansas, and contractors must comply with all OSHA, ANSI, CAN, and UL standards.
256-NETWORK Contract Office 16 (36C256)

POSTED

about 18 hours ago

DEADLINE

in 20 days
NAICS: 238290
New
Federal
J039--561A4-25-500 Elevator Repair Building 6 and 53
Solicitation # 36C24226R0097
Solicitation 36C24226R0097 is a Request for Proposal issued by the Department of Veterans Affairs for the emergency upgrade and modernization of four elevators at the VA New Jersey Healthcare System Lyons Campus, specifically one passenger elevator in Building 6 and one service and two passenger elevators in Building 53. The scope of work requires the contractor to provide all labor, materials, and supervision to install non-proprietary, microprocessor-based control systems, new geared machines, ADA-compliant car operating panels with braille markings, and new hall fixtures. Performance constraints mandate that no single elevator be shut down for more than 13 weeks, and the contractor must maintain a 24/7 emergency answering service. This procurement is a total set-aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 238290. Award will be based on a comparative evaluation of technical capability, past performance, and price. Technical requirements include the prime contractor being a licensed elevator maintenance company with a full-time mechanic on staff, a clean safety record regarding OSHA and EPA violations, and the submission of a current Experience Modification Rate. Offerors must also provide a Buy America certificate and a Limitation of Subcontracting Certificate of Compliance. Following several extensions to address requests for information, the final deadline for proposal submission is 1:00 PM on Friday, November 20, 2026.
242-NETWORK Contract Office 02 (36C242)

POSTED

about 18 hours ago

DEADLINE

in 22 days

AI Contract Overview

Show more

The contract mandates the on-site installation of office chairs in designated Canadian cities including Toronto, Ottawa, and Vancouver, with strict adherence to ergonomic guidelines and post-installation cleanup protocols outlined in Appendix A. All work must be performed in compliance with industry standards to ensure workplace safety and environmental cleanliness, and the contractor is expected to coordinate logistics across multiple provincial locations to meet scheduled timelines. The contract is classified as a subcontract under NAICS code 238290, issued by the Department of Justice on behalf of the Government of Canada, and the response deadline is July 20, 2026. While the place of performance broadly includes several provinces and regions, execution is limited to the specified urban centers, with no flexibility for alternate locations. The solicitation is open to qualified subcontractors who can demonstrate capacity to deliver on-site services efficiently and in full compliance with federal requirements.

General Info

Install office chairs in Toronto, Ottawa, Vancouver per ergonomic standards by July 20, 2026.

Place of Performance

Alberta, British Columbia, Manitoba, National Capital Region (NCR), Nova Scotia, Ontario (except NCR), Quebec (except NCR), Sas, CAN

Set-Aside

NONE

Documents

This scope was carved out of 1000036942.

The full solicitation package (8 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Department of Justice Canada (JUS) National Chair Order 26/27

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGovernment of Canada → Department of Justice
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
On-site installation of office chairs across Toronto, Ottawa, and Vancouver, following ergonomic and cleanup standards in Appendix A.

More opportunities from Government of Canada → Department of Justice

Same awarding agency

NAICS: 337214
New
International
Department of Justice Canada - CAT 6 Office Furniture
Solicitation # 1000037072_CAT6
The Department of Justice Canada is soliciting offers for the purchase, delivery, and installation of office furniture to be delivered to 284 rue Wellington in Ottawa, Ontario. This requirement is issued under the PWGSC Supply Arrangement E60PQ-140003/D, specifically within Product Category 6 for Collaborative Products. Eligible bidders must be holders of the Workspaces Supply Arrangement General Stream. The scope of work includes various items such as collaborative meeting tables, laptop tables, and mobile monitor display units with specific technical requirements for HPL tops, painted metal supports, and integrated power modules. All deliverables must be received by March 31, 2027, with a standard delivery lead time of 8 to 10 weeks. The contract will be awarded based on the lowest evaluated price among compliant offers. Contractors are required to adhere to strict environmental packaging standards, ensuring materials are reusable, returnable, or recyclable in accordance with the Policy on Green Procurement. Additionally, the contractor must comply with Health Canada health standards and provide appropriate personal protective equipment for site access. Payment will be made within 30 days of receiving an acceptable invoice. The inspection process allows Canada to verify work at the contractor's plant, and any identified deficiencies must be addressed within three business days for minor issues or fourteen calendar days for more complex actions.
Office Furniture (except Wood) Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 337214
New
International
Department of Justice Canada - CAT 1,2,3,5,6 Office Furniture
Solicitation # 1000037089
The Department of Justice Canada is soliciting offers for the purchase, delivery, and installation of office furniture to be delivered to 284 Wellington Street in Ottawa, Ontario, by January 25, 2027. This requirement is restricted to holders of the Workspaces Supply Arrangement (SA) series E60PQ-140003/D and covers Product Categories 1, 2, 3, 5, and 6, including workstation systems, work surface products, filing and storage, ancillary products, and collaborative products. The procurement follows the PSIB stream, and the contract will be awarded to the compliant offer with the lowest evaluated price, with evaluations conducted on a per-category basis. Under Amendment 001, the solicitation end date was extended to November 5, 2026, and the scope was modified to remove the Category 6 Collaborative Table and its associated installation table while updating task light specifications. Technical requirements mandate that furniture meet ANSI/BIFMA X5.5 and UL 962 standards, utilize SCS Global GreenGuard Gold certified low-emitting adhesives, and incorporate FSC-certified wood cores. Additionally, the contractor must adhere to strict green procurement policies, ensuring packaging is reusable, returnable, or recyclable. Delivery is required under DDP Incoterms 2020, and there are no security requirements associated with this contract.
Office Furniture (except Wood) Manufacturing

POSTED

3 days ago

DEADLINE

in 7 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS