Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Integration and Calibration Services

Active

Federal

Response Deadline08/05/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails on-site or lab-based integration, calibration, and functional testing of infrared, digital image correlation, lighting, and data acquisition systems to ensure seamless compatibility with the existing VIC-3D setup at NASA Langley. These services are critical to maintaining the accuracy and reliability of optical measurement systems used in aerospace testing and must be executed with precision to meet NASA’s operational benchmarks. The work involves detailed technical coordination to synchronize new hardware and software components with established diagnostic frameworks, ensuring that all systems function cohesively under real-world testing conditions. This is an 8(a) Sole Source subcontract awarded under NAICS code 541330 for scientific and technical consulting services, issued by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. The opportunity was posted on August 3, 2026, with a response deadline of August 5, 2026, indicating a rapid procurement timeline. The nature of the set-aside designation implies that only eligible 8(a) participants may respond, and the contract is structured to support small business development while fulfilling a highly specialized technical requirement critical to NASA’s aeronautics research infrastructure.

General Info

Integration and calibration of optical systems for NASA Langley’s VIC-3D setup under 8(a) sole source subcontract.

Agency

National Aeronautics And Space Administration → NASA Shared Services CenterView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

MS, USA

Set-Aside

8A

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineAug 5

Submission deadline

Response Deadline

08/05/2026, 08:00:00 PM UTCin 1 day

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

ContactsNo contacts available

OfficeN/A

Organization / Agency

National Aeronautics And Space Administration → NASA Shared Services Center

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

On-site or lab-based integration, calibration, and functional testing of IR, DIC, lighting, and DAQ systems to ensure compatibility with existing VIC-3D setup at NASA Langley.

Similar Contracts

Same NAICS industry code

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services under an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract to support major construction projects across various phases including planning, design, construction, and closeout. These services will encompass a range of delivery methods such as Design Build, Progressive Design Build, and other alternative project delivery formats, with the primary goal of ensuring projects adhere to authorized schedules, budgets, and quality standards. The contract is intended to streamline oversight and coordination for the Port’s extensive capital improvement initiatives, requiring technical expertise in managing complex infrastructure developments. Primary point of contact for this opportunity is Hala Rabbo, who can be reached via email or phone, with additional support available from Project Manager Ann Davidson. The solicitation is classified under NAICS code 541330, which designates architectural, engineering, and related services. Although the contract is currently posted as a forecast with no official solicitation number or set-aside details, interested parties are encouraged to monitor the provided UI link for updates and future formal solicitations. The performance location will be at various Port of Seattle facilities and project sites, with no specific city or state specified in the metadata, indicating broad geographic scope across Port operations.

Construction Management

POSTED

about 6 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test/adjust/balance, controls, and regulatory support services across Seattle-Tacoma International Airport’s facilities and infrastructure systems, ensuring optimal performance in a continuous 24/7/365 operational environment. The scope includes identifying and correcting deficiencies in mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems to enhance efficiency, comfort, reliability, and lifespan while maintaining compliance with safety and regulatory standards. Services are delivered through Service Directives and require close collaboration with Aviation Facilities and Infrastructure to meet project deliverables. Work will be managed under an Indefinite-Delivery/Indefinite-Quantity contract, with the Port of Seattle’s Aviation Facilities and Infrastructure team as the primary point of contact. The procurement is classified under NAICS code 541330, reflecting professional, scientific, and technical services related to engineering. Key contacts include Jason Gates as the primary point of contact and Jim Farris as the project manager, both reachable through the Port of Seattle’s official communications. The solicitation was posted on July 31, 2026, with performance expected to occur at the airport location, though specific geographic details are not defined in the provided data.

Aviation Facilities & Infrastructure

POSTED

about 6 hours ago

DEADLINE

Structural Engineering Design for Marine Davit InstallationThe contract requires comprehensive structural engineering design services for the installation of a Viking Norsafe E-60 Conventional Lifeboat Davit at Pier 7, encompassing all phases from load analysis and foundation evaluation to reinforcement design and final documentation. The engineering deliverables must include stamped drawings and a detailed bill of materials, ensuring compliance with applicable structural and marine safety standards. The scope demands precise analysis of existing pier conditions to confirm structural integrity and determine necessary modifications to safely support the davit system under operational and environmental loads. This is a subcontract opportunity classified under NAICS code 541330 for engineering services, reserved exclusively for small business categories including SBA-certified small disadvantaged businesses, women-owned small businesses, HUBZone small businesses, veteran-owned small businesses, and service-disabled veteran-owned small businesses. The solicitation was posted on August 4, 2026, with a response deadline of August 6, 2026, and is administered by Tongue Point Job Corps, though no physical address or point of contact details are provided. The work is to be performed at Pier 7, with all deliverables subject to approval and alignment with the client’s operational and safety protocols for marine infrastructure.

Tongue Point Job Corps

POSTED

about 10 hours ago

DEADLINE

System Testing, Commissioning, and DocumentationThe contract requires the performance of NFPA 72-compliant testing, commissioning, and detailed documentation for fire alarm and detection systems, ensuring all components meet applicable fire safety standards. A Record of Completion must be submitted as part of the deliverables to certify that all system functions have been properly verified and documented in accordance with regulatory requirements. The work is to be conducted at the Earle C. Clements Job Corps Center, though specific location details are not provided, and the project supports critical life safety infrastructure for the facility. This is a subcontract opportunity reserved exclusively for small business categories under SBA set-asides, including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business. The North American Industry Classification System code 541330 indicates the work falls under engineering services, and the response deadline is August 10, 2026, with the solicitation posted on August 4, 2026. The opportunity is accessible via the SBA’s online portal for federal contracting opportunities.

Earle C. Clements Job Corps Center

POSTED

about 10 hours ago

DEADLINE

Testing, Adjusting, and Balancing (TAB) ServicesThe contract requires the performance of Testing, Adjusting, and Balancing (TAB) services on existing hot water circulation pumps to ensure they operate in alignment with the system’s design specifications. This work is critical to optimizing heating efficiency, maintaining proper flow rates, and ensuring system reliability across the facility. The task involves comprehensive diagnostic evaluation, calibration, and fine-tuning of the pumps to meet established performance benchmarks, with adjustments made to accommodate the building’s hydraulic and thermal load requirements. The contract is classified as a subcontract under the SBA’s small business set-aside programs, which include eligibility for Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business entities. It falls under NAICS code 541330 for Engineering Services and is issued by Serrato Corporation DBA Flint Hills Job Corps. Respondents must submit proposals by the deadline of August 13, 2026, though no specific location for performance is provided in the data, and no point of contact details are available. The posting date indicates this opportunity was made public on August 4, 2026, and the solicitation link directs to a federal opportunity portal for further administrative details.

Serrato Corporation DBA Flint Hills Job Corps

POSTED

about 10 hours ago

DEADLINE

Factory-Certified Boiler Start-Up and CommissioningThe contract requires factory-certified start-up and commissioning of boiler control systems, encompassing circulation pumps, sensors, and reset controls, ensuring full operational compliance with manufacturer standards. All work must be performed by certified technicians authorized by the boiler equipment manufacturer to validate system integrity and performance post-installation. This is a subcontract under a small business set-aside designation, open to SBA-recognized categories including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business. The NAICS code 541330 categorizes this as professional, scientific, and technical services related to engineering. The solicitation was posted on August 4, 2026, with a response deadline of August 13, 2026, and the performance location is managed by Serrato Corporation DBA Flint Hills Job Corps, though specific site details are not provided.

Serrato Corporation DBA Flint Hills Job Corps

POSTED

about 10 hours ago

DEADLINE

SEEKING QUALIFIED SUBCONSULTANTS IN RIVERSIDE COUNTY/SOCAL TO SUPPORT WELL REPLACEMENT PROJECT WITH WATER DISTRICT

Solicitation # seeking-qualified-subconsultants-riverside-countysocal-support-well-replacement-project-water

GHD Inc. is soliciting qualified subconsultants to support the Corydon Well Replacement Design Project for Elsinore Valley Municipal Water District in Riverside County and Southern California. The project requires professional services such as engineering, environmental consulting, surveying, geotechnical analysis, permitting, public outreach, and utility location, with a focus on engaging disadvantaged, small, women-owned, minority-owned, and veteran-owned businesses. The solicitation prioritizes participants certified under various set-aside programs including DBE, SBE, WBE, MBE, SDB, WOSB, VOSB, and SDVOSB, aligned with SBA and Department of Transportation guidelines. Interested firms must submit a qualifications package by August 7, 2026, and request solicitation documents no later than 5 PM PST on August 14, 2026, with final responses due by September 15, 2026. Primary contact is Charlie Brown at charles.brown@ghd.com, and the NAICS code associated with the work is 541330 for architectural and engineering services.

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Engineering Design Services

Solicitation # TPJCC Engineering Design Services 26-17

This contract is a fee-for-service solicitation issued by Management & Training Corporation (MTC) on behalf of the Tongue Point Job Corps Center in Astoria, Oregon, for engineering design services to install a Viking Norsafe E-60 Conventional Lifeboat Davit on Pier 7. The scope of work requires a licensed Professional Engineer to produce signed and stamped engineering drawings, structural calculations, material specifications, and a bill of materials to support the installation, with deliverables including electronic PDF copies and one full-size printed drawing set. The contract is classified under NAICS code 541330 for Engineering Services with a size standard of $9 million and is set aside exclusively for small business, small disadvantaged business, women-owned small business, HUBZone small business, veteran-owned small business, and service-disabled veteran-owned small business concerns. All subcontractors must self-certify their business category, possess a Unique Entity Identifier (UEI), provide a valid Taxpayer Identification Number, and disclose debarment status if their subcontract exceeds $30,000. The contractor must comply with Service Contract Labor Standards, pay at least the federal contractor minimum wage as mandated by Executive Order 13658, and adhere to Wage Determination SCA WD 2015-5577 Rev. 28. The contract includes stringent data protection obligations requiring compliance with DOL and federal data privacy guidelines, including encryption of personally identifiable information, reporting of any breach to the Department of Labor within one hour of discovery, and a prohibition on retaining or disseminating any deliverables containing Privacy Act or FOIA-exempt data. The contractor is required to submit proposals via email to Elizabeth Williamson at Williamson.elizabeth@jobcorps.org by 2:00 PM PST on August 6, 2024, and must include a completed bid sheet, W-9 form, self-certification form, and acceptance of MTC’s terms and conditions. Invoices must be submitted to MTC’s corporate office in Centerville, Utah, and must contain the purchase order number, dates of service, itemized pricing with extended unit rates and totals, and invoice number and date. Payment is conditioned upon delivery and acceptance of services. The contractor must also indemnify MTC against all claims arising from their performance, negligence, or breach of contract, though insurance is not required for this project. Termination is permitted by either party with thirty days’ written notice, or immediately if funding is withdrawn.

Tongue Point Job Corps

POSTED

about 10 hours ago

DEADLINE

Corydon Well Replacement (C2305)

Solicitation # C2305

Ardurra Group, Inc. is soliciting proposals from Disadvantaged Business Enterprise (DBE) firms to provide comprehensive design, bidding support, and engineering services during construction for the Corydon Well Replacement Project in California, under solicitation number corydon-well-replacement-c2305-1. The project involves replacing an existing groundwater production well with a new 24-inch diameter stainless steel Ful-Flo louvered well screen, matching existing vertical turbine equipment and integrating discharge piping into the Corydon Blend station and Malaga blending location, in full compliance with AWWA, SWRCB, DWR, and EVMWD standards. Services encompass structural, geotechnical, architectural, noise, survey, corrosion, and potholing engineering, delivered in two distinct phases: Phase 1 focuses on civil site design, technical specifications, line-bid items for drilling and well abandonment, bid assistance, and full-time on-site construction management oversight; Phase 2 covers detailed architectural, mechanical, electrical, instrumentation, and controls design for equipment, testing, and commissioning. The contract requires submission of a detailed cost proposal broken down by task, with total estimated project costs at $2,260,788 including $2 million in construction costs and a negotiable not-to-exceed professional services fee. Proposals must adhere to strict format requirements, including a cover letter, demonstrable project experience, resumes of primary staff and subconsultants, three references, and a comprehensive scope of work. Key attachments include Exhibit B for the Schedule of Services, Exhibit C for compensation rates, and Attachment 2 which mandates completion of certifications for American Iron and Steel compliance, lobbying, debarment/suspension, SAM information, DBE subconsultant disclosures, Executive Order N-6-22, conflict of interest, insurance acknowledgment, and public works registration. All proposers must be certified DBEs and submit comprehensive data on any DBE subconsultants used, including certification numbers and justifications for non-selection. The evaluation process prioritizes relevant qualifications and experience (25%), followed by understanding of the project and technical approach (25%), scope and schedule (20%), innovation (10%), cost and value (10%), and overall proposal quality (10%), with award based on demonstrated competence rather than lowest cost. Mandatory compliance requirements include adherence to the Build America Buy America Act, prohibition of covered telecommunications equipment from Huawei or ZTE, sanctions compliance under Executive Order N-6-22

Ardurra Group, Inc.

POSTED

about 10 hours ago

DEADLINE

Corydon Well Replacement Project - Professional Design, Bidding Support, Engineering Services During Construction

Solicitation # corydon-well-replacement-project-professional-design-bidding-support-engineering-services-during-0

The Corydon Well Replacement Project, managed by the Elsinore Valley Municipal Water District, seeks professional design, bidding support, and engineering services during construction to replace an existing water well in Lake Elsinore, Riverside County, California. The contract, identified as C2305, is solicited by AKM Consulting Engineers and is classified under NAICS code 541330 for architectural and engineering services. The project emphasizes the involvement of Disadvantaged Business Enterprises as part of a transportation department set-aside, encouraging participation from underrepresented firms. Key deliverables include comprehensive design work, assistance with the procurement and bidding process, and ongoing engineering oversight throughout construction to ensure compliance, quality control, and timely completion. The official response deadline is September 1, 2026, with primary point of contact being Katie Neubauer of AKM Consulting Engineers, reachable via phone or email for inquiries. All project details and opportunities are accessible through the SBA’s opportunity portal.

AKM Consulting Engineers

POSTED

about 10 hours ago

DEADLINE

Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction

Solicitation # WO# C2305

The Corydon Well Replacement Project involves the design of a new municipal groundwater production well to replace and permanently abandon the existing Corydon Well, located on Elsinore Valley Municipal Water District (EVMWD) property, with full integration into the existing transmission infrastructure. The project is divided into two phases: Phase 1 focuses on the design of the new well and abandonment of the old one according to Riverside County and California State Water Resources Control Board standards, including technical specifications, civil site design, line-bid items, bidding support, and full-time construction management and hydrogeological oversight during drilling; Phase 2 covers the engineering design for well equipping, including architectural, civil, mechanical, structural, electrical, and instrumentation and controls systems for testing and commissioning, with ongoing engineering support during construction. The well casing must be 24-inch diameter stainless steel Ful-Flo louvered screen matching the existing casing depth, with sanitary seal placement compliant with AWWA standards. All work must adhere to Build America, Buy America Act requirements, including documentation of domestic content for iron, steel, and manufactured products, and compliance with federal procurement rules under 2 CFR Part 184. The project is funded in part by a $400,000 Bureau of Reclamation grant, with the remainder covered by non-federal sources, triggering full compliance with Title 2 CFR Part 200, including debarment and suspension rules, lobbying restrictions under the Byrd Act, Clean Air Act and Clean Water Act subrecipient clauses applicable to subcontracts over $150,000, and procurement of recovered materials when purchases exceed $10,000. The Consultant must provide comprehensive services including hydrogeological analysis, borehole geophysics, geotechnical investigation, water quality sampling, environmental permitting with SWRCB coordination, civil and structural engineering, utility coordination, topographic and boundary surveying, construction inspection, QA/QC, and community outreach. All key personnel must be identified with resumes, professional licenses, and certification details, and the firm must demonstrate experience with municipal groundwater projects and public agency collaboration. Proposals must include detailed cost breakdowns by task, hourly rates, travel, and incidental charges, with a not-to-exceed limit anticipated of $1,000,000. The contract requires monthly invoicing with progress reports, adherence to a 45-day payment term, and records retention for four years post-final payment. The Consultant must comply with the EVMWD

GEI Consultants, Inc.

POSTED

about 10 hours ago

DEADLINE

Request for Proposals for Professional Engineering Staff Augmentation Services

Solicitation # RFP 130-13479

Grant County PUD is seeking proposals for Professional Engineering Staff Augmentation Services under RFP 130-13479, an open solicitation with a clarification deadline of August 20, 2026, and a submission deadline of August 27, 2026. The estimated contract value is provided for informational purposes only and may be subject to change. The request is for qualified firms to provide engineering personnel to support ongoing projects, with all proposals to be submitted offline. Bidders must register and log in to access bid-related communications and question-response details. The point of contact for inquiries is Justin Heilman, District Representative, reachable at jheilman@gcpud.org, with additional procurement support available from Nicona Myers at Nbutler@gcpud.org. The contract is targeted toward organizations capable of delivering skilled engineering resources in Washington State, and prequalification may be required. The solicitation was posted on August 3, 2026, and remains open for bidding.

Grant County PUD

POSTED

about 16 hours ago

DEADLINE

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

Subcontract opportunity decomposition failedA subcontract opportunity was posted by the NASA Shared Services Center under the National Aeronautics and Space Administration with a set-aside classification of 8(a) Sole Source, indicating the contract is reserved exclusively for small businesses participating in the SBA’s 8(a) Business Development program. The solicitation was made available on August 3, 2026, with a response deadline of August 5, 2026, at 8:00 PM Eastern Time, leaving a narrow window for interested parties to submit proposals. However, critical details such as the NAICS code, type of organization, place of performance, and point of contact are missing, which impairs the ability to assess the scope or requirements of the work. The absence of decomposable subcontract opportunities suggests insufficient data is available to identify potential subcontracting components or tiers. Despite the lack of location or contact information, the opportunity can be accessed via the provided SAM.gov link for potential bidders seeking further details.

Space Research and Technology

POSTED

DEADLINE

Data Acquisition (DAQ) System SupplyNASA Shared Services Center is soliciting a subcontract under the 8(a) Sole Source program for the supply of a 6-channel VIC-DAQ FT data acquisition unit designed for integration with digital image correlation and infrared systems to enable high-speed data capture and precise triggering capabilities. The contract falls under NAICS code 334511 and is intended to support advanced experimental testing environments requiring synchronized, high-fidelity instrumentation. The opportunity was posted on August 3, 2026, with a submission deadline of August 5, 2026, and is limited to eligible 8(a) participants, ensuring exclusivity for a single qualified small disadvantaged business. The system must be fully compatible with existing DIC and IR platforms to ensure seamless data synchronization and operational reliability under dynamic test conditions.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

High-Temperature Digital Image Correlation (DIC) Hardware SupplyNASA Shared Services Center has issued an 8(a) sole source subcontract for the supply of specialized High-Temperature Digital Image Correlation (DIC) hardware, including Blue-Hawk DIC systems, 30.5 mm filters, and high-powered Blue-X LED lighting designed for extreme thermal testing environments. The hardware is critical for capturing precise deformation and strain data during high-temperature experiments, ensuring accurate structural analysis under simulated flight and propulsion conditions. The solicitation was posted on August 3, 2026, with a tight response deadline of August 5, 2026, reflecting urgency in procurement to support ongoing research and development programs. The contract falls under NAICS code 334519, which covers other electronic component manufacturing, indicating the highly specialized nature of the equipment and its bespoke application in aerospace testing. This sole-source award under the 8(a) program suggests a pre-qualified small business with unique expertise in providing this niche technology, ensuring rapid delivery and alignment with NASA’s technical requirements without competitive bidding.

Other Measuring and Controlling Device Manufacturing

POSTED

DEADLINE

IR Calibration Target and Accessory Kit SupplyNASA Shared Services Center is seeking the supply of an eight-piece infrared calibration target set and a VIC-Gimbal motorized automatic calibration system specifically designed for use in digital image correlation testing. The contract is structured as an 8(a) sole source subcontract under NAICS code 332721, indicating it is awarded to a small business certified under the Small Business Administration’s 8(a) program without competitive bidding. The solicitation was posted on August 3, 2026, with responses due by August 5, 2026, and the equipment will support high-precision thermal and mechanical testing applications within NASA’s research and development initiatives. All deliverables must meet exacting standards for accuracy and compatibility with existing DIC systems to ensure valid experimental results.

Precision Turned Product Manufacturing

POSTED

DEADLINE

Infrared (IR) Camera and Lens SupplyNASA Langley is seeking a subcontractor to supply a FLIR A700 infrared camera kit equipped with a 17mm lens specifically for use in high-temperature digital image correlation testing. The requirement is awarded under an 8(a) Sole Source contract, indicating that the award is limited to a small business certified under the SBA’s 8(a) Business Development program, with no competitive bidding due to unique qualifications or capabilities. The NAICS code 334510 classifies this as an electronics manufacturing requirement, underscoring the specialized nature of the equipment. The solicitation was posted on August 3, 2026, and responses are due by August 5, 2026, with the contract to be administered by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. The camera kit is critical for capturing precise thermal imagery under extreme conditions, and delivery is expected to support ongoing aerospace research and testing activities at NASA Langley.

Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

DEADLINE

TEAMS-RT Developer Annual LicensingNASA is seeking to procure two annual licenses for TEAMS-RT Developer software to enable real-time fault detection capabilities within its operational environments. The contract is structured as a subcontract under NAICS code 511210 and is managed by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. The software will support mission-critical systems by identifying and diagnosing faults in real time, enhancing system reliability and operational efficiency. The opportunity was posted on August 3, 2026, with a response deadline of August 5, 2026, and the place of performance is designated as 94035, indicating a primary location in California. No set-aside provisions or specific point of contact details are provided, and the solicitation is open for submissions through the SAM.gov platform.

Software Publishers

POSTED

DEADLINE

in about 22 hours

TEAMS-RDS Developer License Maintenance RenewalThe contract is for the annual maintenance and support of a single TEAMS-RDS Developer license, specifically to enable customization and integration into NASA’s fault management systems. This renewal ensures continued access to technical updates, bug fixes, and ongoing support required to maintain system reliability and compatibility within NASA’s operational environment. The work is tied to a single developer license, underscoring its focused scope for engineering and system integration tasks critical to fault management workflows. Issued under the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, the contract is classified as a subcontract with a NAICS code of 541511 for custom computer programming services. The place of performance is listed as 94035, indicating the primary operational location is likely in the Silicon Valley area. The solicitation was posted on August 3, 2026, with a response deadline of August 5, 2026, reflecting a tight window for vendors to submit proposals. No set-aside provisions or point of contact information are specified, and the contract remains open for qualified subcontractors to respond within the narrow timeframe.

Custom Computer Programming Services

POSTED

DEADLINE

in about 22 hours

TEAMS-RDS Professional License Maintenance RenewalThe contract is for the annual maintenance and support of a single TEAMS-RDS Professional License, essential for reliability design and simulation work supporting NASA missions including LUNARIS and VIPER. This subcontract under the NAICS code 541330 is managed by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, with performance required at a location in 94035. The solicitation was posted on August 3, 2026, and responses are due by August 5, 2026, indicating a short window for submission. The license maintenance ensures continued functionality, timely updates, technical support, and compatibility critical to mission-critical simulation environments. No set-aside type is specified, and the contract is procured as a standard subcontract without geographic or demographic preferences.

Engineering Services

POSTED

DEADLINE

in about 22 hours

TEAMS Lifetime Site License Maintenance RenewalThis contract renews annual maintenance and support services for a TEAMS Lifetime Site License, enabling enterprise-wide access to software updates, patches, and ongoing technical assistance at NASA’s Ames Research Center. The agreement ensures uninterrupted functionality and compliance for all users within the organization, with support tailored to meet the operational needs of NASA ARC’s mission-critical systems. Maintenance services include responsive troubleshooting, security enhancements, and compatibility updates to maintain alignment with evolving technological standards. The solicitation is issued as a subcontract under the NAICS code 511210, indicating it falls within software publisher services, and is managed by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. Performance is specifically located at NASA ARC in Moffett Field, California, with a postal code of 94035. The opportunity was posted on August 3, 2026, with a firm response deadline of August 5, 2026, allowing only a brief window for submissions, reflecting the time-sensitive nature of maintaining continuous software support without disruption to mission operations.

Software Publishers

POSTED

DEADLINE

in about 22 hours

TEAMS-RT Developer Maintenance & Support RenewalThe contract entails the annual maintenance, engineering, and technical support for three TEAMS-RT Developer licenses critical to NASA’s fault management systems. The scope includes continuous updates, troubleshooting, and system enhancements to ensure operational reliability and alignment with evolving mission requirements. Support services are expected to be delivered promptly and effectively to minimize downtime and maintain system integrity for NASA’s critical operations. This subcontract is issued by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, with performance expected to be based in Moffett Field, California, zip code 94035. The solicitation was posted on August 3, 2026, with a response deadline of August 5, 2026, indicating a tightly scheduled procurement process. The NAICS code 541511 classifies the work under custom computer programming services, underscoring the specialized technical nature of the support needed. The contract does not specify a set-aside status or point of contact, suggesting it may be a streamlined or internal renewal process.

Custom Computer Programming Services

POSTED

DEADLINE

in about 22 hours

Electrical Labeling and Marking SuppliesThe contract is for the supply of industrial labeling materials specifically tailored for electrical identification purposes, including Brother TZe tapes and the Panduit PCMB-3 wire marker book. These items are critical for ensuring accurate and durable labeling of electrical components at the Stennis Space Center, where clear and lasting identification is essential for maintenance, safety, and operational compliance. The contract is structured as a subcontract, classified under NAICS code 339950, which pertains to other miscellaneous manufacturing, indicating the specialized nature of the labeling products being procured. This procurement is managed by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, with the place of performance firmly established at Stennis Space Center, Mississippi, 39529. The solicitation was posted on August 3, 2026, with a response deadline set for August 7, 2026, indicating a narrow window for interested suppliers to submit proposals. The contract does not specify a set-aside designation, suggesting it is open to general competition. Although no point of contact details are listed, interested parties are directed to the SAM.gov workspace link for further submission and procedural information.

Sign Manufacturing

POSTED

DEADLINE

12 AWG THHN Copper Wire Supply (Green)The contract entails the supply of 100 feet of 12 AWG green THHN-insulated copper wire specifically for use as a grounding conductor, intended to meet electrical safety and compliance standards in critical infrastructure applications. The wire must adhere strictly to specifications for insulation type, gauge, color, and material composition to ensure suitability for grounding purposes in high-reliability environments. The solicitation is issued under a subcontract classification with a NAICS code of 335999, indicating it falls under other electrical equipment and component manufacturing, and is managed by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. The opportunity was posted on August 3, 2026, with a response deadline of August 7, 2026, allowing vendors a brief window to submit proposals. Performance of the contract is required at Stennis Space Center, Mississippi, with a zip code of 39529, indicating the deliverable must be transported and installed at this federal facility. No set-aside provisions or small business preferences are specified, and no point of contact information is provided, suggesting interested parties should reference the official SAM.gov portal link for additional submission guidelines or procedural details.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE