Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Interior Finishes and Painting

Active

Federal

Response Deadline10/24/2026, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Interior Finishes and Painting supports facility projects at the SLAC National Accelerator Laboratory under the Department of Energy. The scope of work involves providing comprehensive interior finishing services for prime contractors, including the installation of non-structural metal framing, gypsum board, resilient base, resinous flooring, and access flooring. Additionally, the contractor is responsible for applying interior and exterior painting as well as high-performance steel coatings, ensuring all materials comply with VOC restrictions to deliver fully painted and floored interior spaces. The opportunity is categorized under NAICS code 238320 and is located in zip code 94025. Interested parties should note that the solicitation was posted on October 9, 2026, with a response deadline set for October 24, 2026.

General Info

Subcontract for interior finishes and painting services at SLAC National Accelerator Laboratory.

Agency

Department Of Energy → Slac National Accel Labor -Doe Contractor

NAICS

238320 - Painting and Wall Covering Contractors

Place of Performance

CA, 94025, USA

Set-Aside

NONE

Documents

This scope was carved out of SLAC_DRAFT_RFP_369005_CRMF_Cleanroom_Construction.

The full solicitation package (31 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CRMF SRF Cleanroom and UPW Construction Sources Sought Notification

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 9

subcontract

Response DeadlineOct 24

Submission deadline

Response Deadline

10/24/2026, 12:00:00 AM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Energy → Slac National Accel Labor -Doe Contractor

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Energy → Slac National Accel Labor -Doe Contractor

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs drywall installation, flooring, and painting for prime contractors on SLAC National Accelerator Laboratory facility projects. Installs non-structural metal framing, gypsum board, resilient base, resinous flooring, and access flooring. Applies interior/exterior painting and high-performance steel coatings per VOC restrictions. Delivers painted and floored interior spaces.

Similar Contracts

Same NAICS industry code

Interior and Exterior PaintingThis subcontract opportunity is for professional interior and exterior painting and coating services to support school renovation projects for the City of Bridgeport. The scope of work involves comprehensive surface preparation, priming, and the application of commercial grade paints and coatings to walls and ceilings to deliver high quality finished surfaces. Eligible contractors must hold a valid Connecticut State License and possess DAS Pre-Qualification to be considered. Interested parties must submit their responses by the deadline of November 17, 2026, as coordinated through the Construction Management agency.

Construction Management

POSTED

about 7 hours ago

DEADLINE

Interior Finishes (Drywall, Flooring, & Painting)This subcontract opportunity is for interior finish work supporting prime contractors on the Muskegon Public Schools 2026 Bond projects. The scope of work involves comprehensive interior build-outs, specifically focusing on the installation of walls, ceilings, and floor coverings. Required services include hanging drywall, taping, mudding, painting, and the installation of both carpet and tile to deliver finished spaces ready for occupancy. The project is categorized under NAICS code 238320 and is located in Grand Rapids, Michigan. Interested parties must submit their responses by the deadline of November 3, 2026, at 5:00 PM. The solicitation was officially posted on October 17, 2026.

Muskegon Public Schools

POSTED

DEADLINE

Painting and CoatingThis subcontract for Painting and Coating is for the Abby Feeding Futures project in Abbotsford, British Columbia, under the School District 34 Abbotsford and the Province of British Columbia. The selected contractor will provide comprehensive interior and exterior painting and surface coating services for prime contractors, ensuring all finished surfaces meet project specifications. The scope of work includes painting exposed pipes, ducts with specific color coding, hangers, and steel work, as well as priming wood materials and painting elevator equipment and semi-concealed areas. All work must be completed using MPI-standard paints and primers. Interested parties must respond by the deadline of November 10, 2026.

School District 34 Abbotsford

POSTED

DEADLINE

Wall CoveringsThis subcontract agreement involves the installation of wall coverings for prime contractors working on the Abby Feeding Futures project located in Abbotsford, British Columbia. The scope of work requires the application of specified wall coverings to interior surfaces to ensure the delivery of finished wall treatments as per project requirements. The opportunity is issued by School District 34 Abbotsford under the Province of British Columbia. Interested parties must submit their responses by the deadline of November 10, 2026, for this project which falls under NAICS code 238320.

School District 34 Abbotsford

POSTED

DEADLINE

Commercial Painting ContractorThis subcontract agreement appoints a Commercial Painting Contractor to provide field painting and surface coating services for prime contractors on University of Rhode Island facility projects. The scope of work includes the field painting of specific items detailed in the contract appendices, comprehensive surface preparation, and the removal of existing finishes in accordance with established guidelines. All refinishing must match adjacent surfaces and adhere to URI standards using approved Benjamin Moore and Sherwin Williams paints. Managed by the State of Rhode Island under NAICS code 238320, the solicitation was posted on October 16, 2026, with a response deadline of November 19, 2026. The selected contractor is responsible for delivering high-quality finished surfaces that meet the university's specific aesthetic and technical requirements.

State of Rhode Island

POSTED

DEADLINE

in about 1 month

Interior and Exterior PaintingThis subcontract for interior and exterior painting involves providing comprehensive coating services for prime contractors on projects managed by the Utah Division of Facilities Construction and Management. The scope of work includes patching and painting interior walls, ceilings, wood trim, doors, frames, paneling, and exposed ductwork, as well as painting exterior fascia, wood supports, and balcony railings. Additionally, the contractor is responsible for applying resinous coatings to exterior concrete patios in accordance with Spec Sections 09 91 13 and 09 67 00 to deliver fully finished surfaces. The opportunity is categorized under NAICS code 238320 and was posted on October 16, 2026. Interested parties must submit their responses by the deadline of November 12, 2026. Further details and submission guidelines can be accessed through the Utah Bonfire hub portal.

POSTED

DEADLINE

Exterior Wood Cladding & PaintingThis subcontract for the Nature Conservancy of Canada involves the preservation and painting of exterior wooden cladding for heritage projects located in Quebec. The selected contractor will be responsible for the professional painting of all exterior wooden surfaces using heritage-grade paint and the punctual replacement of any damaged cladding. All work must strictly adhere to heritage conservation principles to ensure that no irreversible modifications are made to the structures. The primary objective of the contract is the delivery of a fully preserved and painted exterior wooden envelope. Interested parties must submit their responses by the deadline of November 6, 2026. This project falls under NAICS code 238320 and is designed for prime contractors managing these specific conservation efforts.

Nature Conservancy of Canada

POSTED

DEADLINE

Painting & Protective CoatingsThis subcontract agreement involves the application of painting and protective coatings for sewage pumping station projects within the Town of Georgina. The selected contractor will be responsible for performing comprehensive surface preparation and applying industrial coatings in strict accordance with Division 09 specifications to deliver high-quality finished surfaces for prime contractors. The opportunity is categorized under NAICS code 238320 and was posted on October 16, 2026. Interested parties must submit their responses by the deadline of November 16, 2026, at 7:00 PM.

Town of Georgina

POSTED

DEADLINE

Solicitation # 2026C043

The Municipality of Anchorage is soliciting bids for the Bartlett Pool Renovation project (ITB 2026C043) located at 1101 Golden Bear Dr., Anchorage, AK. The scope of work involves a comprehensive renovation including hull repairs, a complete repaint with new lane lines and targets, bulkhead repairs with panel replacements, filter media and lateral replacement, and repairs to the filtration system piping and equipment. The estimated construction cost is between $100,001 and $500,000, and the contract will be awarded as a lump sum to the responsible bidder providing the lowest responsive bid. Qualified contractors must have repainted at least three public-use pools within the last five years and must adhere to the State of Alaska Prevailing Wage Scale and ADA guidelines. Bids must be submitted exclusively in paper format via sealed envelope to the MOA Purchasing Department by October 15, 2026, at 2:00 PM local time. Required submission documents include a manually signed three-page bid proposal, a bid bond, acknowledgment of all addenda, contractor questionnaires, and valid state and municipal business and contractor licenses. The project includes a specific on-site work window from May 17, 2027, to August 20, 2027, with liquidated damages set at $400 per day for delays. Performance and payment bonds certifying 100 percent of labor and materials are required from the prime contractor.

Municipality of Anchorage

POSTED

DEADLINE

Bridge Coating and Corrosion ProtectionThis subcontract for Bridge Coating and Corrosion Protection involves applying protective coatings and corrosion protection systems to bridge steel and concrete for prime contractors on Port Authority of New York and New Jersey George Washington Bridge projects. The scope of work includes surface blasting, cleaning, and the application of coatings using industrial painting equipment and corrosion inhibitors to deliver fully protected structural surfaces. Qualified providers must hold SSPC/NACE certifications to perform these specialized services. The opportunity was posted on October 16, 2026, with a response deadline of November 5, 2026. This project falls under NAICS code 238320 and is managed through the Port Authority of NY & NJ.

Port Authority Of Ny & Nj

POSTED

DEADLINE

Painting and Fireproofing ServicesThis subcontract for Painting and Fireproofing Services involves the application of protective and decorative coatings as well as fire-rated materials for prime contractors working on City of Grande Prairie projects. The scope of work includes general painting for renovation projects and the application of specialized fireproofing to ensure certified safety standards are met across all designated areas. Interested parties must hold a valid COR, COREL, or SECOR safety certification to be eligible. The solicitation was posted on October 16, 2026, with a response deadline set for November 6, 2026. This opportunity falls under NAICS code 238320 and is managed by the City of Grande Prairie.

City of Grande Prairie

POSTED

DEADLINE

Steel Surface Preparation and Industrial CoatingThis subcontract for the City of Chattahoochee Hills involves specialized steel surface preparation and industrial coating for bridge projects. The scope of work requires the contractor to grind existing I-beams to eliminate rust and old paint, followed by the application of multi-coat systems consisting of primers and water-based alkyd urethanes. To ensure environmental safety and site cleanliness, the contractor must utilize plastic sheeting for the full capture and containment of all debris during the process. The primary objective is the delivery of fully prepped and coated structural steel bridge components. This opportunity falls under NAICS code 238320 and was posted on October 16, 2026, with a response deadline of November 19, 2026.

City of Chattahoochee Hills

POSTED

DEADLINE

in about 1 month

More opportunities from Department Of Energy → Slac National Accel Labor -Doe Contractor

Same awarding agency

Solicitation # SLAC_368560_Fabrication

SLAC National Accelerator Laboratory, operated by Stanford University for the Department of Energy, is soliciting quotes for the fabrication of various Ultra-High Vacuum components under solicitation SLAC_368560_Fabrication. The required items include a variety of bases, tubes, plates, mounts, and retainers, with specific quantities ranging from single units to 76 pieces. Source selection will be conducted using the Lowest Price and Technically Acceptable method, with a submission deadline of October 20, 2026. The resulting purchase order will be a fixed-price contract with NET-30 payment terms and FOB Destination Prepaid and Add freight terms. Technical requirements are stringent due to the UHV nature of the components. Prohibited processes include EDM machining without prior approval, the use of sanding discs, grinding wheels, abrasives, sulfur-containing cutting fluids, and silicone lubricants. Specific parts require electropolishing, and dimensional inspection reports must be provided. Offerors must be registered in the System for Award Management and submit a completed Representations and Certifications Rider. Additionally, the Buy American Act applies to any items with a unit price exceeding 15,000 dollars.

Commercial and Service Industry Machinery Manufacturing

POSTED

DEADLINE

Vacuum Window Mount and High-Pressure Tubing SupplyThis subcontract involves the supply of vacuum-compatible interfaces for prime contractors supporting laser projects at the SLAC National Accelerator Laboratory under the Department of Energy. The scope of work includes the delivery of a vacuum window mount and stainless steel tubing assembly, both of which must be engineered to withstand a nominal maximum working pressure of at least 2.5 bar absolute. Additionally, the contract covers the provision of high-pressure upgrade components. The project is categorized under NAICS code 332710 and will be performed in Menlo Park, California. The solicitation was posted on October 14, 2026, with a response deadline set for October 22, 2026.

POSTED

DEADLINE

Precision Fiber Holder and Optical Adjustment Kit FabricationThis subcontract involves the fabrication of precision optomechanical components for prime contractors supporting laser projects at the SLAC National Accelerator Laboratory under the Department of Energy. The scope of work requires the machining of a main fiber holder kit and an optical axis height adjustment kit, both of which are critical for maintaining strict laser alignment. A key technical requirement is that the final assembly footprint must maintain a short dimension of less than 0.2 meters. The project is categorized under NAICS code 333241 and will be performed in Menlo Park, California. The contract was posted on October 14, 2026, with a response deadline of October 22, 2026. The primary deliverable consists of the completed holder and adjustment kits designed to meet the laboratory's precise specifications.

Food Product Machinery Manufacturing

POSTED

DEADLINE

High Power Hollow Core Fiber and Ceramic Taper SupplyThis subcontract involves the supply of high-power mounted hollow core fiber for prime contractors working on laser pulse compression projects at the SLAC National Accelerator Laboratory. The manufacturer is responsible for delivering a mounted fiber assembly compatible with a 1030 nm wavelength, 70 W average power at 40 kHz, and 1.75 mJ input pulse energy, which must include a conical ceramic protection taper. Additionally, the provider is required to submit feasibility data demonstrating the ability to achieve an output pulse duration of less than 10 fs. Managed by the Department of Energy through the SLAC National Accelerator Laboratory, the performance of this contract will take place in Menlo Park, California. The opportunity was posted on October 14, 2026, with a response deadline of October 22, 2026, falling under NAICS code 325211.

Plastics Material and Resin Manufacturing

POSTED

DEADLINE

High power hollow core fiber assembly for laser pulse compression

Solicitation # Req-369233

SLAC National Accelerator Laboratory, operated by Stanford University for the Department of Energy, is seeking a U.S. domestic source for a high power hollow core fiber assembly designed for second stage laser pulse compression. The required equipment includes a main fiber holder kit, stainless steel tubing, a vacuum window mount, a high power mounted fiber with a conical ceramic protection taper, an optical axis height adjustment kit, and a high pressure upgrade. The assembly must be compatible with a laser wavelength of 1030 nm, an input pulse energy of 1.75 mJ, and an average power of 70 W at a 40 kHz repetition rate, with a target output pulse duration below 10 fs. Technical specifications require the assembly to withstand a nominal maximum working pressure of at least 2.5 bar absolute and maintain a footprint with a short dimension of less than 0.2 meters. The award will be determined using the Lowest Price Technically Acceptable method, with a strong emphasis on the best lead time, as the complete assembly must ship within three months of the purchase order. Eligible offerors must be registered in the System for Award Management and provide documented evidence of feasibility regarding the target pulse duration. Payment terms are Net 30 days, and freight is FOB Destination Prepaid and Add for domestic suppliers. The procurement is governed by SLAC's Terms and Conditions for Fixed Price Commercial Supplies and Services and incorporates specific federal requirements, including the Buy American Act and various FAR clauses regarding computer software licenses and international transportation.

Fiber Optic Cable Manufacturing

POSTED

DEADLINE

Plumbing and Process PipingThis subcontract for Plumbing and Process Piping involves the installation of domestic water, sanitary sewers, and process piping for prime contractors at the SLAC National Accelerator Laboratory. The scope of work specifically includes the installation of domestic water piping, sanitary waste piping, and Ultra-Pure Water systems to ensure fully operational plumbing and UPW infrastructure. All drinking water components must strictly comply with NSF 61 and NSF 372 standards. The project is managed under the Department of Energy via the SLAC National Accelerator Laboratory, with performance taking place in the 94025 zip code area. Responses for this opportunity are due by October 24, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Fire Suppression SpecialistThis subcontract opportunity is for a Fire Suppression Specialist to support prime contractors on facility projects at the SLAC National Accelerator Laboratory under the Department of Energy. The selected contractor will be responsible for the installation of wet-pipe sprinkler systems and all necessary support infrastructure, including the placement of sleeves, valves, hangers, and seismic controls to ensure a fully operational fire suppression system. The project falls under NAICS code 238220 and is located in the 94025 zip code area. Interested parties must submit their responses by the deadline of October 24, 2026, following the posting date of October 9, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Cleanroom Systems SpecialistThis subcontract opportunity is for a Cleanroom Systems Specialist to support prime contractors on facility projects at the SLAC National Accelerator Laboratory for the Department of Energy. The selected provider will be responsible for the fabrication and installation of an ISO4 cleanroom envelope, which includes the installation of cleanroom wall panels, ceiling systems, and pass-through chambers. The primary objective is to deliver a fully enclosed cleanroom shell that strictly adheres to ISO4 classification standards. The project is categorized under NAICS code 238990 and will be performed in the 94025 zip code area. Interested parties should note that the solicitation was posted on October 9, 2026, with a response deadline set for October 24, 2026.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Doors, Frames and GlazingThis subcontract opportunity involves the supply and installation of aluminum frames, automatic entrances, and glazing for facility projects at the SLAC National Accelerator Laboratory. The scope of work requires the delivery and full installation of interior glass partitions, sliding automatic entrance systems, and various interior glazing systems, serving as a subcontractor to prime contractors. The project is managed under the Department of Energy through the SLAC National Accelerator Laboratory, with performance taking place in the 94025 zip code area. Interested parties should note the response deadline of October 24, 2026, and the associated NAICS code 238150 for these specialized installation services.

Glass and Glazing Contractors

POSTED

DEADLINE

Firestopping and Joint SealantsThis subcontract opportunity involves the installation of penetration firestopping and joint sealants for prime contractors working on facility projects at the SLAC National Accelerator Laboratory under the Department of Energy. The scope of work requires sealing pipe penetrations in fire-rated walls and floors using non-combustible, smoke-tight materials, as well as the installation of interior joint sealants. All work must strictly adhere to SCAQMD 1113 VOC restrictions to ensure environmental compliance and result in certified fire-rated penetrations and sealed joints. The project is categorized under NAICS code 238390 and will be performed in the 94025 zip code area. Interested parties should note that the solicitation was posted on October 9, 2026, with a response deadline set for October 24, 2026.

Other Building Finishing Contractors

POSTED

DEADLINE

Rough Carpentry and WoodworkThis subcontract for Rough Carpentry and Woodwork involves providing miscellaneous rough carpentry and blocking services for prime contractors on facility projects at the SLAC National Accelerator Laboratory. The scope of work includes the installation of nailers, utility shelving, plywood backing panels, and blocking to support subsequent trade installations. All materials must adhere to specified lumber grades and utilize fire-treated plywood in accordance with DOC PS 1 standards. The opportunity is managed by the Department of Energy through the SLAC National Accelerator Laboratory, with performance taking place in the 94025 zip code area. Interested parties should note that the response deadline is October 24, 2026, and the work falls under NAICS code 238130.

Framing Contractors

POSTED

DEADLINE

Structural and Miscellaneous MetalsThis subcontract for Structural and Miscellaneous Metals involves the fabrication and installation of structural steel and architectural metalwork for facility projects at the SLAC National Accelerator Laboratory. The scope of work includes the installation of structural steel framing, metal decking, cold-formed framing, ladders, pipe railings, and safety gates. To ensure quality and safety standards, the contractor must hold AWS D1.1, D1.2, and D1.6 welding certifications for steel, aluminum, and stainless steel. Managed under the Department of Energy, the project is located in zip code 94025. Interested parties must submit their responses by the deadline of October 24, 2026. The primary deliverable for this engagement is the complete installation of steel framing and safety systems for prime contractors.

Structural Steel and Precast Concrete Contractors

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS