Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Interior Finishes (Drywall & Painting)

Active

State & Local

Response Deadline11/03/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract agreement involves performing interior finish work, specifically wall repairs and painting, for Commonwealth of Virginia Department of Motor Vehicles facility projects. The scope of work includes the installation of non-structural metal framing and 5/8 inch Type X gypsum board finished to a Level 4 standard. Additionally, the contractor is responsible for applying MPI-standard institutional low-odor and low-VOC latex paint systems to both gypsum and galvanized metal surfaces to deliver completed interior walls and ceilings. The project is located at the DMV Norfolk Widgeon Customer Service Center and falls under NAICS code 238130. The solicitation process is active with a response deadline set for November 3, 2026. This contract is structured as a subcontracting opportunity intended for providers capable of meeting specific institutional painting standards and high-quality drywall finishing requirements for government facilities.

General Info

Subcontract for interior wall repairs and painting at DMV Norfolk by November 3, 2026.

Agency

Virginia → Department of Motor Vehicles

NAICS

238130 - Framing Contractors

Place of Performance

DMV Norfolk Widgeon Customer Service Center (CSC), VA, USA

Set-Aside

NONE

Documents

This scope was carved out of 154-B5154-003.

The full solicitation package (5 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

DMV Norfolk Widgeon HVAC

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 25

subcontract

Response DeadlineNov 3

Submission deadline

Response Deadline

11/03/2026, 07:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyVirginia → Department of Motor Vehicles

ContactsNo contacts available

OfficeN/A

Organization / AgencyVirginia → Department of Motor Vehicles

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs wall repairs and painting for prime contractors on Commonwealth of Virginia DMV facility projects. Installs non-structural metal framing and 5/8" Type X gypsum board finished to Level 4. Applies MPI-standard institutional low-odor/VOC latex paint systems (MPI #134, #145, #147, #149) to gypsum and galvanized metal. Delivers finished and painted interior walls and ceilings.

Similar Contracts

Same NAICS industry code

Electrical Systems InstallationThis subcontract for Electrical Systems Installation involves performing electrical grounding, bonding, and conduit installation for prime contractors at Department of State Hospitals projects located in Napa. The scope of work includes the installation of grounding and bonding systems, hangers, supports, conduits, boxes, covers, underground ducts, raceways, and wiring devices in accordance with Sections 26-05-26 through 26-07-26. The selected provider must hold a valid California Electrical License and adhere to OSFM approved specifications to deliver the completed electrical power and grounding infrastructure. This opportunity is categorized under NAICS code 238130, with a response deadline of October 9, 2026.

California Department of State Hospitals

POSTED

about 17 hours ago

DEADLINE

Masonry SubcontractorThis masonry subcontract involves performing specialized brick and concrete block work for prime contractors on detention center projects located in Lee County, Mississippi. The scope of work includes laying brick and concrete masonry units, as well as constructing reinforced concrete walls for cell areas utilizing high-strength blocks and reinforced steel to ensure structural integrity. The project is managed by the Mississippi Department of Finance and Administration under the agency MPTAP. Bidders must possess a Mississippi Certificate of Responsibility for any bids exceeding 50,000 dollars. The solicitation was posted on September 25, 2026, with a response deadline of October 8, 2026.

POSTED

about 23 hours ago

DEADLINE

MasonryThis subcontract for masonry services involves the installation of brick, block, and stone masonry for prime contractors working on Lee County Board of Supervisors facility projects. The scope of work includes laying concrete masonry units, performing brickwork, applying mortar, and delivering completed masonry walls and partitions. The contract is managed by the MPTAP agency in Mississippi under NAICS code 238130. It was posted on September 25, 2026, with a response deadline of October 9, 2026.

POSTED

about 23 hours ago

DEADLINE

Masonry ServicesThis subcontract for Masonry Services, issued by the MPTAP agency in Mississippi, involves performing masonry and brickwork for prime contractors on facility projects located in Lee County. The scope of work includes laying brick, block, or stone and installing concrete masonry units using standard tools and mortar to deliver completed walls and structures. The opportunity is categorized under NAICS code 238130. A critical requirement for this contract is that any provider handling projects exceeding 50,000 dollars must possess a Mississippi Certificate of Responsibility. The solicitation was posted on September 25, 2026, with a response deadline of October 8, 2026.

POSTED

about 23 hours ago

DEADLINE

Rough Carpentry SubcontractorThis subcontract for rough carpentry services involves performing structural wood framing and support work for prime contractors on Vancouver Coastal Health facility projects. The scope of work includes the installation of dimension lumber framing, wood furring, grounds, blocking, and sheathing, as well as the installation of mounting boards for telephone and panel equipment. All work must culminate in the delivery of completed rough carpentry framing and sheathing to support the roof system. Technical requirements specify the use of Type 304 stainless steel or hot-dip zinc coated fasteners in compliance with CSA G164M and ASTM-A153 standards. This opportunity is managed by the Fraser Health Authority under NAICS code 238130, with a response deadline set for October 16, 2026.

Fraser Health Authority

POSTED

DEADLINE

Interior Finishes SubcontractorThe Interior Finishes Subcontractor contract is issued by the Bristol Alliance of Companies for projects located at the JBLM facility in Washington. The selected subcontractor will be responsible for performing finish carpentry and gypsum board installation, delivering completed interior walls and wood finishes for prime contractors working on Washington Army National Guard facility projects. This subcontract opportunity falls under NAICS code 238130 and was posted on September 25, 2026. Interested parties must submit their responses by the deadline of October 16, 2026.

Bristol Alliance of Companies

POSTED

DEADLINE

Rough CarpentryThis subcontract for the Region of Peel involves providing rough carpentry and framing services for facility projects. The selected contractor will be responsible for installing wood framing and blocking necessary for door frames and acoustic panels, ensuring all rough framing and blocking are delivered as completed. The solicitation was posted on September 25, 2026, with a response deadline of October 22, 2026. This opportunity falls under NAICS code 238130 and is intended for those capable of performing specialized carpentry work for prime contractors within the municipality.

POSTED

DEADLINE

Miscellaneous Rough CarpentryThis subcontract opportunity involves performing miscellaneous rough carpentry and structural wood framing for National Research Council Canada facility projects located in Ottawa. The scope of work requires the installation of structural support and framing necessary to facilitate new roofing systems or plumbing modifications, all performed in accordance with standard construction practices. The selected subcontractor will work alongside prime contractors to deliver completed rough carpentry and framing installations. The solicitation is categorized under NAICS code 238130 and is managed by the Government of Canada through the National Research Council. Interested parties must submit their responses by the deadline of October 20, 2026. This contract is specifically designated as a subcontracting opportunity for specialized construction services within the federal facility maintenance and development sector.

National Research Council of Canada

POSTED

DEADLINE

Rough CarpentryThis subcontract for rough carpentry services is issued by Hanover County, Virginia, to support school facility projects. The selected provider will work under prime contractors to deliver general rough carpentry and wood framing, specifically focusing on the supports necessary for HVAC and ceiling replacements. The opportunity was posted on September 25, 2026, with a response deadline of October 15, 2026. Classified under NAICS code 238130, the work will be performed within Hanover County.

POSTED

DEADLINE

Carpentry and Cabinetry SubcontractorThis subcontract for the Maryland Department of Public Works Capital Project Management involves providing specialized carpentry and cabinetry services for transit facility projects in Charles County. The selected subcontractor will be responsible for executing rough carpentry framing, installing sheathing, and fitting plastic-laminate-clad architectural cabinets for prime contractors. The opportunity is categorized under NAICS code 238130 and was posted on September 24, 2026. Interested parties must submit their responses by the deadline of October 29, 2026.

DPW - Capital Project Management

POSTED

DEADLINE

in about 1 month

EIFS Stucco and Siding InstallationThis subcontract for Cameron Independent School District involves the installation of EIFS stucco and siding for prime contractors on facility projects. The scope of work includes the removal of cultured stone, metal lath, and rotten plywood sheathing, followed by the installation of 7/16 inch OSB plywood, Tyvek house wrap, EPS insulation board, and EIFS finish systems complete with flashings and trims. The selected provider must ensure all personnel pass background checks in accordance with Texas Education Code Chapter 22. Final deliverables include the completed installation, all necessary warranty documentation, and manufacturer certifications. The response deadline for this opportunity is October 9, 2026.

POSTED

DEADLINE

Security Window and Frame InstallationThis subcontract for Cameron Independent School District involves the installation of security window systems across the CES, CJH, and BME campuses. The scope of work includes field verification, the removal of existing windows, and the installation of metal frames and safety glass. All installations must include 3M protective film and sealants that adhere to TEA standards, with frames painted to match existing finishes. The project requires all personnel to undergo background checks in accordance with Texas Education Code Chapter 22. The final deliverable consists of fully installed, sealed, and painted window systems. The response deadline for this opportunity is October 9, 2026.

POSTED

DEADLINE

More opportunities from Virginia → Department of Motor Vehicles

Same awarding agency

Doors, Hardware & SealantsThis subcontract involves the supply and installation of hollow metal doors, frames, and mechanical hardware for swinging doors at the Virginia Department of Motor Vehicles Norfolk Widgeon Customer Service Center. The scope of work includes providing interior standard steel doors and applying mildew-resistant silicone sealants to joints between walls and plumbing fixtures. The project is categorized under NAICS code 238390 and is intended for prime contractors managing Commonwealth of Virginia DMV facility projects. The response deadline for this opportunity is November 3, 2026.

Other Building Finishing Contractors

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Fire Alarm & Smoke DetectionThis subcontract opportunity involves the installation of stand-alone duct smoke detection systems for the Virginia Department of Motor Vehicles. The scope of work requires the installation of smoke detectors within HVAC ductwork and the subsequent connection of these units to a central control center to ensure a fully certified system. The project is specifically designated for the DMV Norfolk Widgeon Customer Service Center and is categorized under NAICS code 238210 for electrical contractors and other specialties. Prime contractors should note that the solicitation is active with a response deadline of November 3, 2026. The project is managed by the Commonwealth of Virginia's Department of Motor Vehicles and is intended to enhance fire safety protocols within their facility infrastructure. Interested parties must submit their responses through the provided vendor portal prior to the specified cutoff time to be considered for this specialized fire alarm and smoke detection installation contract.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 23 hours ago

DEADLINE

in about 1 month

HVAC Instrumentation & ControlsThis subcontract opportunity involves the installation of HVAC instrumentation and controls for the Commonwealth of Virginia Department of Motor Vehicles at the DMV Norfolk Widgeon Customer Service Center. The scope of work requires the installation of control equipment, sensors, variable-frequency motor controllers, control panels, and dampers, as well as the wiring of signal and communication cables. The successful contractor is responsible for delivering a fully functional HVAC control system along with all necessary software documentation. The solicitation is classified under NAICS code 238220 and is intended for subcontractors working alongside prime contractors on DMV facility projects. Interested parties must submit their responses by the deadline of November 3, 2026. This project is specifically focused on technical electrical and mechanical control integration to ensure the proper operation of climate control systems within the specified government facility.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Electrical Systems & ControlsThis subcontract opportunity involves providing electrical systems and controls for Commonwealth of Virginia Department of Motor Vehicles facility projects, specifically at the DMV Norfolk Widgeon Customer Service Center. The scope of work requires performing electrical wiring and grounding for prime contractors, which includes the installation of GRC and IMC raceways, boxes, and cabinets. Additionally, the contractor is responsible for wiring disconnect switches and power connections for HVAC equipment, delivering energized electrical service to these units, and installing grounding and bonding systems in accordance with UL 467 standards using NETA testing equipment. The solicitation is classified under NAICS code 238210 and is scheduled to be posted on September 25, 2026, with a response deadline of November 3, 2026. Interested parties must manage their submissions through the provided vendor portal to meet the specified requirements for these specialized electrical installations.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 23 hours ago

DEADLINE

in about 1 month

HVAC InsulationThis subcontract opportunity involves providing thermal insulation services for HVAC piping and equipment at the Department of Motor Vehicles Norfolk Widgeon Customer Service Center in Virginia. The scope of work requires the installation of flexible elastomeric insulation, ranging from one to two inches in thickness, on refrigerant suction and hot-gas piping. Additionally, the contractor is responsible for installing mineral-fiber preformed pipe insulation on condensate and domestic water lines, as well as the delivery of all insulated piping and equipment. The contract is classified under NAICS code 238220 and is intended for prime contractors working on Commonwealth of Virginia DMV facility projects. Interested parties must submit their responses by the deadline of November 3, 2026. This project focuses on specialized insulation applications to ensure the efficiency and proper functioning of HVAC systems within the specified government facility.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Sheet Metal & DuctworkThis subcontract for the Virginia Department of Motor Vehicles involves the fabrication and installation of metal ductwork at the DMV Norfolk Widgeon Customer Service Center. The selected contractor will be responsible for delivering a complete air distribution network using galvanized-steel, stainless-steel, or aluminum ducts, ensuring all work adheres to SMACNA standards. The scope of work includes the installation of volume-control dampers, turning vanes, access panels, and trapeze supports made from galvanized-steel shapes and plates. The project falls under NAICS code 238220 and was posted on September 25, 2026. Interested parties must submit their responses by the deadline of November 3, 2026. This opportunity is designed for providers capable of supporting prime contractors in the execution of specialized sheet metal and ductwork requirements for state facility projects.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 23 hours ago

DEADLINE

in about 1 month

HVAC Systems Installation (Mechanical)This subcontract focuses on the mechanical installation of HVAC systems for the Commonwealth of Virginia Department of Motor Vehicles, specifically targeting projects at the DMV Norfolk Widgeon Customer Service Center. The scope of work involves installing split-system air conditioners and refrigerant piping for prime contractors, including the installation of dual circuit heat pumps, filter dryers, receivers, and refrigerant suction and hot-gas piping in compliance with ASHRAE 15 standards. The contractor is responsible for delivering fully operational systems by performing essential testing, adjusting, and balancing procedures using vacuum pumps for charging. The solicitation is classified under NAICS code 238220 and is scheduled to be posted on September 25, 2026, with a response deadline of November 3, 2026. This opportunity is structured as a subcontracting arrangement intended to support the agency's facility infrastructure needs. Interested parties must ensure all technical requirements regarding refrigerant management and system balancing are met to fulfill the contract's operational standards.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Selective Demolition & Refrigerant RecoveryThis subcontract for the Virginia Department of Motor Vehicles involves selective demolition services at the Norfolk Widgeon Customer Service Center. The scope of work includes full depth concrete saw-cutting, breaking up slabs-on-grade, disconnecting and capping piping and ducts, and removing debris using chutes and hoists to provide a cleared site ready for installation. A critical requirement of the contract is the use of a certified refrigerant recovery technician to ensure all refrigerant is removed in compliance with 40 CFR 82. All resulting waste must be disposed of at an EPA-approved landfill. The solicitation was posted on September 25, 2026, with a response deadline of November 3, 2026, under NAICS code 238910.

Site Preparation Contractors

POSTED

about 23 hours ago

DEADLINE

in about 1 month

DMV Norfolk Widgeon HVAC

Solicitation # 154-B5154-003

The Virginia Department of Motor Vehicles is soliciting bids for the removal and replacement of HVAC systems at the Norfolk Widgeon Customer Service Center located at 850 Widgeon Road, Norfolk, Virginia. This lump sum contract, identified by project code 154-B5154-003, has an estimated value of 69,000 dollars. The project requires the contractor to provide high quality workmanship in accordance with technical drawings and specifications, including A2L piping requirements and strict packaging and storage standards to prevent product deterioration. Award will be granted to the lowest responsive and responsible bidder based on the total base bid amount and any selected additive items. Prospective bidders must be registered in the eVA portal and attend a mandatory pre-bid conference on October 8, 2026, at 10:00 a.m. at the Norfolk site. Electronic bids must be submitted via eVA by 2:00 p.m. on November 3, 2026. Required submission documents include a bid bond, a Small Business Procurement Plan, and a certification of non-debarment. The successful contractor must comply with Virginia prevailing wage laws, provide performance and payment bonds within ten days of acceptance, and adhere to a drug-free workplace policy. Additionally, employers with over 50 employees must participate in the E-Verify program, and any asbestos-related work must be performed by licensed subcontractors.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Licensed Aluminum Recycling ProcessingThis subcontract for Licensed Aluminum Recycling Processing supports prime contractors on Virginia Department of Motor Vehicles projects. The selected provider is responsible for the industrial processing and recycling of bulk aluminum license plates using approved smelting or shredding equipment in accordance with licensed recycling standards. Performance takes place across DMV CSC and select office locations statewide. The contractor must provide comprehensive transaction records, including precise weights and recycling rates, and deliver all recycled materials along with certified weight tickets. This opportunity, categorized under NAICS code 423930, was posted on September 22, 2026, with a response deadline of October 23, 2026.

Recyclable Material Merchant Wholesalers

POSTED

DEADLINE

Aluminum Scrap Collection and Hauling ServicesThis subcontract for Aluminum Scrap Collection and Hauling Services supports the Virginia Department of Motor Vehicles by managing the collection and transportation of aluminum license plates. The contractor is responsible for executing monthly pickups from Customer Service Centers and bi-monthly pickups from Select Offices across the state. All operations must utilize trucks equipped with liftgates and hand trucks to ensure efficient material handling, with a focus on managing logistics and reporting the condition of pickups. The collected materials are to be delivered to a licensed recycling facility. This opportunity falls under NAICS code 484220 and is open for responses until October 23, 2026. Performance takes place at DMV CSC and Select Office locations throughout Virginia.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Admin Services/Aluminum License Plates Hauling and Recycling

Solicitation # 154:27-128726

The Virginia Department of Motor Vehicles is seeking an experienced firm to collect, haul, and recycle customer-returned and damaged aluminum license plates from all Customer Service Centers and Select Office locations statewide. The contract begins on January 1, 2027, for an initial one-year term with five optional one-year renewals. The selected contractor must provide monthly pickups from Customer Service Centers and bi-monthly pickups from Select Offices, utilizing a licensed recycling facility. A key component of the agreement is a revenue-sharing model where the contractor returns an agreed-upon percentage of the scrap yard proceeds to the DMV by the 15th of each month, supported by detailed monthly receipts showing aluminum weight, scrap rates, and total payments. To be considered, bidders must demonstrate the capacity to handle at least 30,000 pounds of aluminum per month and possess necessary equipment such as liftgates and hand trucks. The award will be made to the lowest responsive and responsible bidder, with specific award priority given to DSBSD-certified micro and small businesses. Requirements for submission include a proposed pickup schedule, a report format for income, a list of heavy equipment, and completed vendor data and State Corporation Commission forms. Contractors must comply with USDOT, FMCSA, and DMV Operating Authority regulations and maintain comprehensive insurance coverage, including Commercial General Liability of 1 million dollars per occurrence and 2 million dollars in aggregate. Applications are due via the eVA portal by October 23, 2026.

Recyclable Material Merchant Wholesalers

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS