Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

International Ground Handling and FBO Services

Active

State & Local

Response Deadline10/16/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The International Ground Handling and FBO Services subcontract, issued by the Texas Department of Transportation, focuses on coordinating and providing essential ground support for prime contractors on international flight support projects. The scope of work includes arranging Fixed Base Operator services, aircraft parking, fueling, towing, and the provision of ground power units. All operations must adhere to the standards set forth in the IATA Ground Operations Manual, utilizing specialized ground support equipment and fueling trucks to ensure seamless service delivery. The contract requires the delivery of secured ground support and fueling services at designated international waypoints. This subcontracting opportunity is categorized under NAICS code 488190 and is scheduled for a response deadline of October 16, 2026. Interested parties must manage logistics and equipment to meet the specific operational requirements of TxDOT's international flight support initiatives.

General Info

TxDOT subcontract for international ground handling, FBO services, and fueling; deadline October 16, 2026.

Agency

Texas Department of Transportation

NAICS

488190 - Other Support Activities for Air Transportation

Place of Performance

TX, USA

Set-Aside

NONE

Documents

This scope was carved out of 601440000054204.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

International Flight Support

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 25

subcontract

Response DeadlineOct 16

Submission deadline

Response Deadline

10/16/2026, 09:00:00 PM UTCin 20 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyTexas Department of Transportation

ContactsNo contacts available

OfficeN/A

Organization / Agency

Texas Department of Transportation

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Coordinates and provides ground support services for prime contractors on TxDOT international flight support projects. Arranges Fixed Base Operator (FBO) services, aircraft parking, fueling, towing, and ground power units (GPU) per IATA Ground Operations Manual (IGOM) standards. Utilizes ground support equipment (GSE) and fueling trucks. Delivers secured ground support and fueling at international waypoints.

Similar Contracts

Same NAICS industry code

International Flight Planning and Dispatch ServicesThe International Flight Planning and Dispatch Services subcontract supports the Texas Department of Transportation on international flight support projects. The scope of work involves performing comprehensive flight planning, route optimization, and dispatch services for prime contractors. Key responsibilities include developing detailed flight plans, calculating necessary fuel requirements, monitoring weather patterns, and coordinating with Air Traffic Control in strict accordance with ICAO standards. To ensure operational accuracy, the service provider must utilize professional flight planning software such as ForeFlight or Jeppesen and is required to deliver validated flight plans and weather briefings. Qualified candidates or entities must hold an FAA Dispatcher Certification to fulfill the technical requirements of this contract. This subcontracting opportunity is categorized under NAICS code 488190 and was posted on September 25, 2026. Interested parties must submit their responses by the deadline of October 16, 2026. The contract is managed through the Texas Department of Transportation to facilitate specialized aviation support for their international project initiatives.

Texas Department of Transportation

POSTED

about 13 hours ago

DEADLINE

International Flight Support

Solicitation # 601440000054204

The Texas Department of Transportation is seeking a contractor to provide comprehensive international flight support services under solicitation number 601440000054204. This procurement is categorized under NAICS code 488190 and is managed by the Texas Department of Transportation. The primary point of contact for this effort is Stacie Collins. Interested respondents must submit their proposals through the Euna Procurement portal, formerly known as Bonfire, by the deadline of October 16, 2026, at 9:00 PM. All submissions must be completed via the portal, and late responses will not be accepted. The agency utilizes National Institute of Governmental Purchasing codes to standardize its purchasing structure. All official updates, addendums, and communications regarding this solicitation will be posted on the procurement website.

Texas Department of Transportation

POSTED

about 13 hours ago

DEADLINE

Solicitation # SPE4A6-26-T-32KC

Solicitation SPE4A6-26-T-32KC, issued by the DLA Aviation ASC Commodities Division, is a request for quotations for 16 units of a source controlled wiring harness, identified by NSN 6150-01-443-4197. The item must be manufactured and tested according to cited limited rights data, specifically TDP Rev A Gen 1 per Basic Drawing NR 99207 5107T08 Revision C. Due to the source controlled nature of the item, only vendors with access to the technical data or traceability to approved sources should quote. Delivery is required within 171 days after receipt of order, with a need ship date of March 16, 2027, and a final required delivery date of August 14, 2027, shipping FOB Origin to DLA Distribution Jacksonville. The contract imposes stringent quality and security requirements, including CMMC Level 2 certification and compliance with ISO 9001:2015. Inspection and acceptance will occur at the origin, utilizing sampling methods per MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances. Technical data is subject to ITAR or EAR export controls, requiring approved JCP certification for access. Additionally, offerors must adhere to domestic sourcing mandates, including the Buy American Act and the Berry Amendment. Packaging and marking must comply with MIL-STD-129, and all payment processing will be handled through the Wide Area WorkFlow system.

ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

BRACKET, B2 REV 2, AI

Solicitation # SPE4A6-26-U-4141

Solicitation SPE4A6-26-U-4141 is a request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of Bracket, B2 Rev 2, AI, identified by NSN 6340015253472. The requirement is for an estimated annual quantity of 156 units, with a guaranteed contract minimum of 15 units and a minimum delivery order quantity of 19 units. This is a unilateral Indefinite Delivery Contract (IDC) with a maximum value of 350,000.00 dollars and a performance period of one year. Delivery is required within 57 days after receipt of order, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over the general packaging standard ASTM D3951. All packaging and labeling must comply with MIL-STD-129, and palletization must follow RP001 requirements. Additionally, the contractor must ensure that mercury or mercury-containing compounds are not intentionally added to the hardware. Compliance with the Buy American Act and the Berry Amendment is required, and the contractor must utilize the Wide Area WorkFlow (WAWF) system for electronic invoicing and receiving reports. Cybersecurity requirements include a CMMC Level 2 self-assessment and adherence to NIST SP 800-171 standards.

ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

HOUSING, ANTIFRICTION B

Solicitation # SPE4A5-26-T-323C

Solicitation SPE4A5-26-T-323C is a request for quotations issued by DLA Aviation for the procurement of six non-aircraft antifriction bearing housings, identified by NSN 2835-01-327-8850. The requirement specifies a delivery timeframe of 171 days after the date of order, with the items being shipped to DLA Distribution Cherry Point in North Carolina. The procurement is designated as a small business set-aside under NAICS code 488190. Inspection and acceptance will take place at the destination, utilizing zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. The contract incorporates stringent technical and quality standards, including the DLA Master List of Technical and Quality Requirements, CMMC Level 2 self-assessment, and safeguarding of covered defense information. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must adhere to MIL-STD-129 and RQ017. Item Unique Identification is not required for this specific order. Payment and receiving reports are to be processed electronically through the Wide Area WorkFlow system. The solicitation also mandates compliance with the Buy American Act, the Berry Amendment, and various FAR and DFARS clauses regarding ethics, trafficking in persons, and the prohibition of certain telecommunications equipment.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

Aerial Seeding Application (Helicopter Services)This subcontract for aerial seeding application involves providing helicopter services for Oregon Department of Forestry reforestation projects within the Willamette National Forest. The contractor is responsible for spreading seed across 5,024 acres of difficult terrain using low-level flight operations, ensuring that seed lots are managed according to specific elevation and zone requirements. The service requires an airworthy helicopter equipped with GPS and VHF radio capabilities. Deliverables include the completed seeding of the designated areas and the submission of digital KML coverage files. The project is based in Salem, Oregon, with a response deadline of October 16, 2026.

Procurement Only

POSTED

about 20 hours ago

DEADLINE

Flight Service Center (FSC) & Repair Cycle SupportThis subcontract for the Department of Defense involves providing technical aircraft parts and repair cycle management for prime contractors at Hurlburt Field. The scope of work includes managing turnaround processing, PPMR, DWA processing, and DIFM records through the use of ILS-S. Additionally, the contractor is responsible for coordinating functional checks with maintenance activities and supporting the PQDR program to deliver processed repair cycles and detailed reports. The position requires personnel to possess a Secret Clearance and specialized technical knowledge of aircraft part numbering. This opportunity falls under NAICS code 488190 and is managed by FA4417 1 Socons. Interested parties must respond by October 8, 2026.

FA4417 1 Socons

POSTED

about 24 hours ago

DEADLINE

NOAA P-3 Rolls-Royce Maintenance & Support Service

Solicitation # 1305M226Q0153

POSTED

DEADLINE

Supply of Gear Operator, Valve (NSN 4820-01-522-3583)This subcontract involves the procurement and delivery of a Valve Gear Operator, identified by NSN 4820-01-522-3583, for prime contractors supporting DLA Land and Maritime hardware contracts. The required hardware consists of part number 6612/2-867-000 or 6612/2-867-000/6120-012-000, which must be sourced from Curtiss-Wright Flow Control Corporation and delivered to the designated shipping point. The contract is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. Strict adherence to Critical Application Item quality standards is required, along with compliance with DFARS 252.204-7012 and NIST SP 800-171 security protocols. The solicitation was posted on September 24, 2026, with a response deadline of October 5, 2026, under NAICS code 488190.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Military-Grade Packaging and Palletization ServicesThis subcontract for Military-Grade Packaging and Palletization Services supports prime contractors on DLA Land and Maritime projects at the DDSP New Cumberland Facility. The scope of work involves specialized packaging, marking, and palletization of hardware in strict accordance with MIL-STD-2073-1E, MIL-STD-129, and RP001. Technical requirements include the use of preservation method AE, cleaning and drying level 1, and cushioning material A, all utilizing MIL-SPEC materials to ensure secure shipment. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 488190. Performance will take place in New Cumberland, Pennsylvania. Interested parties must submit responses by the deadline of October 5, 2026, for this Department of Defense requirement.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

MIL-SPEC Packaging and Marking ProviderThis subcontract, titled MIL-SPEC Packaging and Marking Provider, is issued by the Department of Defense Fluid Handling Division for performance in New Cumberland, Pennsylvania. The provider is responsible for delivering specialized military packaging, marking, and palletization services for prime contractors fulfilling DLA supply contracts. All work must be executed using military-grade materials and industrial labeling systems to ensure shipments are ready for DLA acceptance. Technical requirements mandate strict adherence to MIL-STD-2073-1E for packaging, RP001 for palletization, and MIL-STD-129 for marking. The opportunity was posted on September 24, 2026, with a response deadline of October 5, 2026. The contract falls under NAICS code 488190.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Military-Spec Packaging and Shipping ServicesThis subcontract for Military-Spec Packaging and Shipping Services involves providing specialized packaging and marking for rifle mounts to support prime contractors on Defense Logistics Agency supply contracts. The work requires strict adherence to MIL-STD-2073-1E and MIL-STD-129 for marking, and RP001 for palletization, utilizing Pres Mthd 31 and Unit/Intermdte Cont E5 specifications with approved MIL-SPEC wrap and cushioning materials. The scope of work includes the packaging and palletization of 12 units of rifle mounts for delivery to the DDSP New Cumberland Facility. This project falls under NAICS code 488190 and is managed by the Department of Defense, with the place of performance located in New Cumberland, Pennsylvania.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS