Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

IR 7/39/2026 Black Leather Corrections Jailers Key Leash 23" and 13"

Active
SRC0000040870State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicitation titled IR 7/39/2026 Black Leather Corrections Jailers Key Leash 23 and 13 seeks black leather key leashes measuring 23 inches and 13 inches, intended for use by corrections and jailers within the Ohio Department of Rehabilitation and Correction system. The solicitation was posted on July 29, 2026, with a response deadline of August 12, 2026, and is classified under a SLED procurement, indicating it is targeted at state, local, or educational government entities. Performance of the contract will be carried out in Ohio, with the issuing agency identified as Dys351100 Irjcf - Administration Irjv, suggesting a specific correctional facility or administrative unit under Ohio’s corrections infrastructure. No set-aside designation or NAICS code is specified, and the solicitation is accessible through the OhioBuys portal, indicating a state-run procurement platform. All necessary details for response submission, including specifications and delivery requirements, are expected to be available via the provided UI link.

General Info

Ohio correctional facility seeks 23-inch and 13-inch black leather key leashes by August 12, 2026.

Agency

Dys351100 Irjcf - Administration Irjv

NAICS

316990 - Other Leather and Allied Product ManufacturingView NAICS

Place of Performance

OH, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDys351100 Irjcf - Administration Irjv
ContactsNo contacts available
OfficeN/A
Organization / Agency
Dys351100 Irjcf - Administration Irjv
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Key chains or key cases

Similar Contracts

Same NAICS industry code

NAICS: 316990
New
DIBBS
LIGHT, MARKER, DISTRESS
Solicitation # SPE8E7-26-T-3514
The contract specifies the procurement of a Triage Emergency Light, a commercial off-the-shelf item identified by NSN 6230-01-605-9650 and part number V6.8A or ZZ-1177, designed for emergency triage conditions and patient collection. The device is cylindrical with a tapered cone-shaped end, measuring 3.125 inches by 1.125 inches, and features multiple synchronized color combinations—red, yellow, green, and blue—produced by LEDs with an approximate lifespan of 100,000 hours. It operates on a replaceable 3-volt CR2 lithium battery offering 72 to over 200 hours of runtime depending on color mode, functions in temperatures ranging from -30 to +130 degrees Fahrenheit, and is water-resistant with pressure testing to 66 feet. The unit weighs 43.4 grams without packaging and is to be delivered in a quantity of 71 units within 72 days of contract award, with delivery terms set at FOB origin. The item is intended for medical use and must comply with all relevant packaging and marking standards, including the Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging requirements mandate that each unit be sealed in a suitable container to prevent damage, and all units must be shipped in commercial exterior containers that ensure safe, cost-effective delivery by common carrier. Palletization is required for shipments exceeding 250 pounds or 20 cubic feet and must use Type IV or V 4-way entry pallets measuring 40 inches by 48 inches, with total load dimensions not exceeding 54 inches in height, 43 inches in length, or 52 inches in width. Alternative commercial unitization is permitted. All shipments to DLA distribution centers require passive RFID tags per DFARS Clause 252.211-7006, though exemptions exist for certain FSC codes. Markings must include the NSN and government quantity on each unit, and additional regulatory markings apply for special handling. Wood packaging materials must be heat treated or kiln-dried under DoD standards, and shipping must follow the specified freight address in New Cumberland, Pennsylvania. The solicitation number is SPE8E7-26-T-3514, with a response deadline in August 2026 and
DDSP NEW CUMBERLAND FACILITY

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 316990
International
Sam Browne and Scottish Sword Scabbards
Solicitation # W8486-260625/A
The Department of National Defence is seeking the supply of Sam Browne sword scabbards in two distinct patterns—Infantry and Scottish Broadsword—both constructed from brown leather and designated by National Stock Numbers 8465-99-127-9993 and 8465-99-127-9994 respectively. These scabbards are intended for ceremonial use by Canadian Army Officers and Chief Warrant Officers and must strictly conform to the Statement of Work, technical specifications, sealed patterns, and all annexes and appendices outlined in the solicitation, including the detailed technical requirements for each pattern and the general specification for Sam Browne scabbards. Compliance with UK/SC/6206 Issue 7 and DSSPM 05-25 is mandatory, and the scabbards must meet stringent quality standards, including proper fit, absence of mechanical flaws, consistent coloring, and legible markings. Packaging requires each scabbard to be sealed in a clear polythene bag and placed within a non-crushable cardboard box, with all outer shipping containers marked using the prescribed bilingual nomenclature and NSN, while explicitly prohibiting any contractor branding. Samples must be submitted to the National Printing Bureau in Ottawa by the deadline, labeled with the offeror’s name and solicitation number, and once received, become the sole property of Canada without reimbursement. All offers must be submitted electronically by email to DLP3Bids-DAAT3Soumissions@forces.gc.ca no later than July 21, 2026, at 14:00 EDT, and must include a complete technical offer, financial offer, and mandatory forms such as the Offer Submission Form and Offeror Declaration Form. Offers must remain valid for 180 days after the deadline. The contract will be awarded on the basis of the lowest evaluated price among compliant offers, with full compliance with the Statement of Work serving as a mandatory pass/fail criterion. The winning contractor must deliver all items within ten months of contract award to designated Canadian Forces Supply Depots in Montreal and Edmonton under DDP Incoterms 2020 terms, with customs duties included in the fixed unit prices and applicable taxes billed separately. Payment will be made within 30 days of receipt of a properly formatted invoice, which must include detailed line items, shipping documentation, and tax registration numbers, and will be subject to a 15 percent withholding for non-resident contractors unless
Department of National Defence

POSTED

about 1 month ago

DEADLINE

in about 8 hours
View Details