Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Defense was posted on June 2, 2020. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

J--OPTION - Provide Maintenance and repair for 37 Ice Machines

Awarded
N6883620Q0049Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management & Training Corporation, operator of the Earle C. Clements Job Corps Center in Morganfield, Kentucky, is soliciting bids for the clutch replacement of a Kubota M8200 tractor equipped with front wheel assist and no cab or loader. The contractor is responsible for providing all transportation, labor, supervision, tools, and new manufacturer-specified parts to diagnose and repair the clutch assembly and power take-off system. The scope of work includes disassembling tractor components, replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing necessary hydraulic pipes and filters. Final acceptance is contingent upon the Facility Maintenance Department verifying proper clutch engagement and disengagement and confirming the unit is fully operational under load. This is a fee-for-service solicitation based on a lump sum bid, with award determined by best value. Interested offerors must submit a bid sheet, a completed supplier packet including IRS Form W-9 and self-certification, proof of insurance, and any applicable SBA certification letters by November 3, 2026. The contract is set aside for small businesses and incorporates various Federal Acquisition Regulation clauses regarding equal opportunity, minimum wage standards under Service Contract Labor Standards, and restrictions on foreign purchases. Contractors must also comply with strict security and confidentiality protocols regarding non-public information and government facilities.
Earle C. Clements Job Corps Center

POSTED

about 5 hours ago

DEADLINE

in 3 days
NAICS: 811310
New
SLED
Asphalt Storage Tank Maintenance and Repair
Solicitation # 601320000072188
The Texas Department of Transportation (TxDOT) issued Invitation for Bid (IFB) 601320000072188 in October 2026 for the maintenance and repair of two Duraco Model 8250 asphalt storage tanks located at the Gonzales Maintenance Facility in District 13. The scope of work includes the cleaning of tanks, installation of new manway gaskets and other necessary seals, and the off-site transport and disposal of all removed materials in compliance with Texas Health and Safety Code Chapter 361. All work must be performed according to manufacturer recommendations and applicable standards, with a final inspection required by a TxDOT representative prior to invoicing. Responses are due by November 6, 2026, at 3:00 p.m. Central Time and must be submitted via the Euna Procurement portal. To be considered, bidders must provide a comprehensive submission including a price schedule in Excel format, qualifications and references, a detailed approach to work, and a mandatory child support obligation certification. TxDOT will award the contract based on best value, primarily considering purchase price, compliance with specifications, and the risk of vendor non-performance. Eligible vendors must maintain a vendor performance rating of A, B, or C in the CPA Vendor Performance Tracking System and provide insurance from companies with an A.M. Best rating of A- or better.
Texas Department of Transportation

POSTED

1 day ago

DEADLINE

in 6 days
NAICS: 811310
New
SLED
Conveyance Maintenance Services
Solicitation # 26-1336
Chicago Public Schools is soliciting bids for Conveyance Maintenance Services under solicitation number 26-1336 to implement a comprehensive preventive maintenance program for conveyance equipment. The selected bidder will provide all labor, materials, and supervision necessary to ensure equipment remains safe and operational, adhering to the City of Chicago Municipal Code, ASME A17.1/CSA B44, ASME A17.3, and original equipment manufacturer standards. The contract includes a three-year initial term with the possibility of two automatic renewals of two years each. Services involve monthly preventive maintenance during normal working hours from 6:00 a.m. to 2:30 p.m., as well as 24/7 emergency callback support. Key deliverables include site-specific maintenance schedules, the use of CPS facilities software for reporting, and an annual Executive Summary Report based on a 7-point assessment rubric. The agreement will be awarded to the lowest, responsive, and responsible bidder based on evaluation factors including price, business stability, professional qualifications, past performance, and capacity. Bidders must submit a comprehensive package via Bonfire, including an Excel-based bid tabulation, audited financial statements for the last three fiscal years, three non-Board references, and a W-9 tax form. Compliance with MBE/WBE aspirational goals of 30% and 7% respectively is required, along with adherence to the Illinois Minimum Wage Law and various federal and state non-discrimination acts. Invoicing must be submitted electronically in PDF format, with payments processed according to the Local Government Prompt Payment Act. All shipments are designated as F.O.B. destination. The deadline for questions is November 6, 2026, and the final response deadline is November 20, 2026.
Chicago Public Schools

POSTED

1 day ago

DEADLINE

in 20 days
NAICS: 811310
New
SLED
Annual Inspection/Maint. and Repair on Generator at FMS #8
Solicitation # SRC0000037488
Solicitation SRC0000037488 is for the annual inspection, maintenance, and repair of a Speed Air air compressor (Model 1WD44, SN: D063475) at FMS #8 in Gadsden, Alabama. The scope of work includes replacing belts, collecting oil samples, and installing filters, cabinet filter mats, and repair kits for the oil and thermostatic valves. A mandatory site visit is required on November 18, 2026, at 10:00 AM at 5319 Airport Road, Gadsden, Alabama. The response deadline is November 23, 2026, and all bids must be submitted electronically through the Alabama Buys portal. The contract is managed by the Army MCA and the State of Alabama, with a maximum total value of 25,000 dollars over a potential five-year period, subject to annual renewals. Award evaluation will be based on price reasonableness, cost realism, and supplier qualifications, including professional licenses and insurance. Vendors must comply with the Code of Alabama, including the Beason-Hammon Alabama Taxpayer and Citizen Protection Act and registration requirements for foreign corporations. Payment will be handled electronically via P-cards, EFT, or state-issued credit cards. Final acceptance of services is contingent upon a satisfactory inspection by the State of Alabama in accordance with the Universal Commerce Code.
Army MCA_App 01_Real Property Operations & Maintenance, State Military Department

POSTED

1 day ago

DEADLINE

in 22 days
NAICS: 811310
New
SLED
Electrical & Automation Services
Solicitation # 9181
The City of Denton is soliciting proposals for Electrical and Automation Services to support 12 Wartsila 18V50SG units located at the Denton Energy Center. The selected contractor must ensure all equipment operates within Original Equipment Manufacturer specifications without voiding existing warranties. Key performance requirements include providing personnel and service offers within one week of notice and completing repairs and services within five weeks of evaluation. The City will award the contract based on best value, evaluating submissions through a weighted scoring system: 30% for schedule timeliness, 30% for compliance with specifications, 20% for indicators of probable performance, and 20% for total cost of ownership. Submissions must be made via IONWAVE or hard copy by December 2, 2026, at 2:00 PM CT. Hard copy responses must be sealed, limited to 200 pages, and bound only with staples or binder clips. Required documentation includes proof of Texas state registration, a conflict of interest questionnaire, and a safety record. The contractor must comply with Davis-Bacon prevailing wage rates, the Buy American Act, and ADA non-discrimination practices. Invoicing must be submitted to the City's Accounts Payable department within 30 calendar days of service completion, with payments processed within 30 days of receipt. All deliverables must be shipped with weather-resistant labeling and a packing slip to the designated Denton address.
City Of Denton

POSTED

1 day ago

DEADLINE

in about 1 month

AI Contract Overview

Show more

Solicitation N6883620Q0049 is a small business set-aside request for quote issued by the Naval Supply Logistics Center Jacksonville. The contract requires semi-annual inspection, maintenance, and repair services for 37 ice machines located within the Triden refit facility Industrial Area and WRA. These machines are critical for cooling parts to fit into hydraulic RAM cylinders. The procurement consists of a base period from May 7, 2020, to May 6, 2021, with two subsequent one-year option periods extending the performance through May 6, 2023. All quotes and pricing must be submitted electronically via the Unison Marketplace, where the government intends to conduct a competitive reverse auction. Evaluation of offers will be based on the technical capability of the services to meet government requirements and the total price. The contract mandates the use of new equipment only, prohibiting remanufactured or gray market items, and requires all items to be covered by a manufacturer warranty.

General Info

Contract Value

$177,671.9

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

FL, USA

Set-Aside

NONE

Award Issued Date

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

1 update
PhaseAwarded
Posted

Combined Synopsis

Notice updated

The notice description changed.

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Flt Logistics Ctr Jacksonville
Contacts1 person available
OfficeJACKSONVILLE, FL, 32212-0097, USA
Office AddressJACKSONVILLE, FL, 32212-0097, USA
Contacts
Marketplace Support

Full Description

Show more
AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is N6883620Q0049 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2020-03. The associated North American Industrial Classification System (NAICS) code for this procurement is 811310 with a small business size standard of $7.50M. This requirement is a Small Business set-aside and only qualified offerors may submit quotes. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted and will end on 2020-01-14 11:00:00.0 Eastern Time or as otherwise displayed at www.UnisonMarketplace.com. FOB Destination shall be in the Special Shipping Instructions. The FLC - Jacksonville requires the following items, Meet or Exceed, to the following: Base Period of Performance: 05/07/2020 - 05/06/2021 LI 001: 1) Semi-annual inspection. Provide maintenance and repair for (37) thirty seven, Triden refit facility ice machines located in the TRF Industrial Area and WRA, Equipment guide list (EGL) denotes locations for all service required equipment. Service is required for certain parts that need to be cooled down by ice in order for them to fit in the hydraulic RAM cylinders. PLEASE SEE ATTACHED STEMENT OF WORK FOR DETAILS., 37, EA; Option 1 Period of Performance: 05/07/2021 - 05/06/2022 LI 001: 1) Semi-annual inspections. Provide maintenance and repair for (37) thirty seven, Triden refit facility ice machines located in the TRF Industrial Area and WRA, Equipment guide list (EGL) denotes locations for all service required equipment. Service is required for certain parts that need to be cooled down by ice in order for them to fit in the hydraulic RAM cylinders. PLEASE SEE ATTACHED STATEMENT OF WORK FOR DETAILS., 37, EA; Option 2 Period of Performance: 05/07/2022 - 05/06/2023 LI 001: 1)Semi-annual inspection. Provide maintenance and repair for (37) thirty seven, Triden refit facility ice machines located in the TRF Industrial Area and WRA, Equipment guide list (EGL) denotes locations for all service required equipment. Service is required for certain parts that need to be cooled down by ice in order for them to fit in the hydraulic RAM cylinders. PLEASE SEE STATEMENT OF WORK FOR DETAILS, 37, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.UnisonMarketplace.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, FLC - Jacksonville intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison, Inc. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing quotes, which descend in price during the specified period of time for the aforementioned reverse auction. FLC - Jacksonville is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time quotes. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their quote using the online exchange located at www.UnisonMarketplace.com. There is no cost to register, review procurement data or make a quote on www.UnisonMarketplace.com. Offerors that are not currently registered to use www.UnisonMarketplace.com should proceed to www.UnisonMarketplace.com to complete their free registration. Offerors that require special considerations or assistance may contact Marketplace Support at +1 (555) 000-0000 or via email at contact@example.gov. Offerors may not artificially manipulate the price of a transaction on www.UnisonMarketplace.com by any means. It is unacceptable to place bad faith quotes, to use decoys in the www.UnisonMarketplace.com process or to collude with the intent or effect of hampering the competitive www.UnisonMarketplace.com process. Should offerors require additional clarification, notify the point of contact or Marketplace Support at +1 (555) 000-0000 or contact@example.gov of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. This announcement constitutes the only solicitation; a formal, written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This solicitation documents and incorporates provisions and clauses in effect through FAC 2005-60 and DFARS Change Notice 20120724. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: www.acqnet.gov/far and http://www.acq.osd.mil/dpap/dfars/index.htm Except as provided in FAR 4.1102(a), the contracting officer shall insert the provision 52.204-7, System for Award Management, in all solicitations. If the solicitation is anticipated to be awarded in accordance with 4.1102(a)(5), the contracting officer shall use the provision 52.204-7, System for Award Management, with its Alternate I. Note: Insert the clause 52.204-13, System for Award Management Maintenance, in solicitations that contain the provision 52.204-7. (b) Insert the clause 52.204-13, System for Award Management Maintenance, in solicitations that contain the provision at 52.204-7, and resulting contracts. (a) Insert the provision 52.204-16, Commercial and Government Entity Code Reporting, in all solicitations that include-- (1) 52.204-6, Data Universal Numbering System Number; or (2) 52.204-7, System for Award Management. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. No partial shipments are permitted unless specifically authorized at the time of award. Bid MUST be good for 30 calendar days after close of Buy. (b) Insert the provision 52.204-17, Ownership or Control of Offeror, in all solicitations that include the provision 52.204-16, Commercial and government Entity Code Reporting. (c) Insert the clause 52.204-18, Commercial and Government Entity Code Maintenance, in all solicitations and contracts when the solicitation contains the provision 52.204-16, Commercial and Government Entity Code Reporting. The contracting officer shall insert the clause 52.204-19, Incorporation by Reference of Representations and Certifications, in all solicitations and contracts. The contracting officer shall-- (a) Include the provision 52.209-2, Prohibition on Contracting with Inverted Domestic Corporations--Representation, in each solicitation for the acquisition of products or services (including construction); and (b) Include the clause 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations, in each solicitation and contract for the acquisition of products or services (including construction). (d) The contracting officer shall insert the provision 52.209-11, Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law, in all solicitations. Insert the following provision in solicitations for the acquisition of commercial items: (1) The provision 52.212-1, Instructions to Offerors -- Commercial Items. This provision provides a single, streamlined set of instructions to be used when soliciting offers for commercial items and is incorporated in the solicitation by reference (see Block 27a, SF 1449). The contracting officer may tailor these instructions or provide additional instructions tailored to the specific acquisition in accordance with 12.302. The provision 52.212-3, Offeror Representations and Certifications -- Commercial Items. This provision provides a single, consolidated list of representations and certifications for the acquisition of commercial items and is attached to the solicitation for offerors to complete. This provision may not be tailored except in accordance with Subpart 1.4. Use the provision with its Alternate I in solicitations issued by DoD, NASA, or the Coast Guard. Insert the clause in solicitations and contracts for the acquisition of commercial items: The clause 52.212-4, Contract Terms and Conditions -- Commercial Items. This clause includes terms and conditions which are, to the maximum extent practicable, consistent with customary commercial practices and is incorporated in the solicitation and contract by reference (see Block 27, SF 1449). Use this clause with its Alternate I when a time-and-materials or labor-hour contract will be awarded. The contracting officer may tailor this clause in accordance with 12.302. Insert the clause in solicitations and contracts for the acquisition of commercial items: The clause 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders--Commercial Items. This clause incorporates by reference only those clauses required to implement provisions of law or Executive orders applicable to the acquisition of commercial items. The contracting officer shall attach this clause to the solicitation and contract and, using the appropriate clause prescriptions, indicate which, if any, of the additional clauses cited in 52.212-5(b) or (c) are applicable to the specific acquisition. Some of the clauses require fill-in; the fill-in language should be inserted as directed by 52.104(d). When cost information is obtained pursuant to Part 15 to establish the reasonableness of prices for commercial items, the contracting officer shall insert the clauses prescribed for this purpose in an addendum to the solicitation and contract. This clause may not be tailored. Insert the clause 52.222-50, Combating Trafficking in Persons, in all solicitations and contracts. Use the clause with its Alternate I when the contract will be performed outside the United States (as defined at 22.1702) and the contracting officer has been notified of specific U.S. directives or notices regarding combating trafficking in persons (such as general orders or military listings of - off-limits local establishments) that apply to contractor employees at the contract place of performance. The contracting officer shall insert the clause 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving, in all solicitations and contracts. Insert the clause 52.225-13, Restrictions on Certain Foreign Purchases, in solicitations and contracts, unless an exception applies (Office of Foreign Assets Control). (a) The contracting officer shall insert the clause - (1) 52.232-33, Payment by Electronic Funds Transfer--System for Award Management, in all solicitations and contracts that include the provision 52.204-7 or an agency clause that requires a contractor to be registered in the SAM database and maintain registration until final payment, unless (i) Payment will be made through a third party arrangement (see 13.301 and paragraph (d) of this section); or (ii) An exception listed in 32.1103(a) through (i) applies. The contracting officer shall include in all solicitations the provision 52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran'Representation and Certifications. The contracting officer shall insert the clause 52.232-39, Unenforceability of Unauthorized Obligations in all solicitation and contracts. Insert the clause 52.232-40, Providing Accelerated Payments to Small Business Subcontractors, in all solicitations and contracts. The contracting officer may, when contracting by negotiation, insert the clause 52.242-15, Stop-Work Order, in solicitations and contracts for supplies, services, or research and development. If a cost-reimbursement contract is contemplated, the contracting officer shall use the clause with its Alternate I. The contracting officer shall insert the provision 52.252-1, Solicitation Provisions Incorporated by Reference, in solicitations in order to incorporate provisions by reference. The contracting officer shall insert the clause 52.252-2, Clauses Incorporated by Reference, in solicitations and contracts in order to incorporate clauses by reference. Use the clause 252.203-7000, Requirements Relating to Compensation of Former DoD Officials, in all solicitations and contracts, including solicitations and contracts using FAR part 12 procedures for the acquisition of commercial items. Use the clause 252.203-7002, Requirement to Inform Employees of Whistleblower Rights, in all solicitations and contracts. Use the provision 252.203-7005, Representation Relating to Compensation of Former DoD Officials, in all solicitations, including solicitations using FAR part 12 procedures for the acquisition of commercial items and solicitations for task and delivery orders. Use the clause 252.204-7003, Control of Government Personnel Work Product, in all solicitations and contracts. (a) Use the provision 252.204-7008, Compliance with Safeguarding Covered Defense Information Controls, in all solicitations and contracts, including solicitations and contracts using FAR part 12 procedures for the acquisition of commercial items. Use the clause 252.204-7012, Safeguarding of Unclassified Controlled Technical Information, in all solicitations and contracts, including solicitations and contracts using FAR part 12 procedures for the acquisition of commercial items Use the clause 252.204-7015, Disclosure of Information to Litigation Support Contractors, in all solicitations and contracts, including solicitations and contracts using FAR part 12 procedures for the acquisition of commercial items. Use the provision 252.209-7002, Disclosure of Ownership or Control by a Foreign Government, in all solicitations, including those subject to the procedures in FAR part 13, when access to proscribed information is necessary for contract performance. If the solicitation includes the provision at FAR 52.204-7, do not separately list the provision 252.209-7002 in the solicitation. Use the clause 252.225-7048, Export-Controlled Items, in all solicitations and contracts. (a) Except as provided in 232.7002(a), use the clause 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports, in solicitations and contracts, including solicitations and contracts using FAR part 12 procedures for the acquisition of commercial items. (b) Use the clause 252.232-7006, Wide Area WorkFlow Payment Instructions, in solicitations and contracts, including solicitations and contracts using FAR part 12 procedures for the acquisition of commercial items, when 252.232-7003 is used and neither 232.7003(b) nor (c) apply. See PGI 232.7004 (DFARS/PGI view) for instructions on completing the clause. Use the clause 252.232-7010, Levies on Contract Payments, in all solicitations and contracts, including solicitations and contracts using FAR part 12 procedures for the acquisition of commercial items. Use the clause 252.243-7001, Pricing of Contract Modifications, in solicitations and contracts when anticipating and using a fixed price type contract. Use the clause 252.244-7000, Subcontracts for Commercial Items, in solicitations and contracts, including solicitations and contracts using FAR part 12 procedures for the acquisition of commercial items. (b) Use the basic or one of the alternates of the clause 252.247-7023, Transportation of Supplies by Sea, in all solicitations and contracts, including solicitations and contracts using FAR part 12 procedures for the acquisition of commercial items, except those for direct purchase of ocean transportation services. (1) Use the basic clause unless any of the supplies to be transported are commercial items that are (i) Shipped in direct support of U.S. military contingency operations, exercises, or forces deployed in humanitarian or peacekeeping operations when the contract is not a construction contract; or (ii) Commissary or exchange cargoes transported outside of the Defense Transportation System when the contract is not a construction contract. (2) Use the alternate I clause if any of the supplies to be transported are commercial items that are shipped in direct support of U.S. military contingency operations, exercises, or forces deployed in humanitarian or peacekeeping operations when the contract is not a construction contract. (2) Use the alternate I clause if any of the supplies to be transported are commercial items that are shipped in direct support of U.S. military contingency operations, exercises, or forces deployed in humanitarian or peacekeeping operations when the contract is not a construction contract. (3) Use the alternate II clause if any of the supplies to be transported are commercial items that are commissary or exchange cargoes transported outside of the Defense Transportation System (10 U.S.C. 2643), when the contract is not a construction contract (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: (i) technical capability of the item offered to meet the Government requirement; (ii) price; (c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. Insert the provision at 52.204-20, Predecessor of Offeror, in all solicitations that include the provision at 52.204-16, Commercial and Government Entity Code Reporting. 52.219-1 Alt I- (1) Insert the provision at 52.219-1, Small Business Program Representations, in solicitations exceeding the micro-purchase threshold when the contract will be performed in the United States or its outlying areas.(2) Use the provision with its Alternate I in solicitations issued by DoD, NASA, or the Coast Guard. Insert the clause at 52.219-28, Post-Award Small Business Program Rerepresentation, in solicitations and contracts exceeding the micro-purchase threshold when the contract will be performed in the United States or its outlying areas. Insert the clause at 52.222-3, Convict Labor, in solicitations and contracts above the micro-purchase threshold, when the contract is to be performed in the United States, Puerto Rico, the Northern Mariana Islands, American Samoa, Guam, or the U.S. Virgin Islands; unless -- (a) The contract will be subject to 41 U.S.C. chapter 65, Contracts for Materials, Supplies, Articles, and Equipment Exceeding $15,000 (see subpart 22.6), which contains a separate prohibition against the employment of convict labor; (b) The supplies or services are to be purchased from Federal Prison Industries, Inc. (see Subpart 8.6); or (c) The acquisition involves the purchase, from any State prison, of finished supplies that may be secured in the open market or from existing stocks, as distinguished from supplies requiring special fabrication. Insert the clause at 52.222-19, Child Labor'Cooperation with Authorities and Remedies, in all solicitations and contracts for the acquisition of supplies that are expected to exceed the micro-purchase thresholds. (1) Free of expense to the Government delivered, on board the carrier's conveyance, at a specified delivery point where the consignee's facility (plant, warehouse, store, lot, or other location to which shipment can be made) is located; and (2) Supplies shall be delivered to the destination consignee's wharf (if destination is a port city and supplies are for export), warehouse unloading platform, or receiving dock, at the expense of the contractor. The Government shall not be liable for any delivery, storage, demurrage, accessorial, or other charges involved before the actual delivery (or - constructive placement as defined in carrier tariffs) of the supplies to the destination, unless such charges are caused by an act or order of the Government acting in its contractual capacity. If rail carrier is used, supplies shall be delivered to the specified unloading platform of the consignee. If motor carrier (including - piggyback) is used, supplies shall be delivered to truck tailgate at the unloading platform of the consignee, except when the supplies delivered meet the requirements of Item 568 of the National Motor Freight Classification for - heavy or bulky freight. When supplies meeting the requirements of the referenced Item 568 are delivered, unloading (including movement to the tailgate) shall be performed by the consignee, with assistance from the truck driver, if requested. If the contractor uses rail carrier or freight forwarder for less than carload shipments, the contractor shall ensure that the carrier will furnish tailgate delivery when required, if transfer to truck is required to complete delivery to consignee. (a)(1) Use the clause at 252.211-7003, Item Unique Identification and Valuation, in solicitations and contracts, including solicitations and contracts using FAR part 12 procedures for the acquisition of commercial items, for supplies, and for services involving the furnishing of supplies, unless the conditions in 211.274-2(b) apply. Use the provision at 252.213-7000, Notice to Prospective Suppliers on the Use of Past Performance Information Retrieval System'Statistical Reporting in Past Performance Evaluations, in competitive solicitations for supplies when using FAR part 13 simplified acquisition procedures, including competitive solicitations using FAR part 12 procedures for the acquisition of commercial items and acquisitions valued at less than or equal to $1 million under the authority at FAR subpart 13.5. Use the basic or the alternate of the clause at 252.225-7001, Buy American and Balance of Payments Program, instead of the clause at FAR 52.225-1, Buy American'Supplies, in solicitations and contracts, including solicitations and contracts using FAR part 12 procedures for the acquisition of commercial items, Use the clause at 252.225-7002, Qualifying Country Sources as Subcontractors, in solicitations and contracts that include the basic or one of the alternates of the following clauses: (i) 252.225-7001, Buy American and Balance of Payments Program. (ii) 252.225-7021, Trade Agreements. (iii) 252.225-7036, Buy American'Free Trade Agreements'Balance of Payments Program. As prescribed in 4.2105(a), the contracting officer shall insert the provision at 52.204-24, Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment (1) In all solicitations for contracts; and (2) Under indefinite delivery contracts, in all notices of intent to place an order, or solicitations for an order (i.e., subpart 8.4 and 16.505). As prescribed in 4.2105(b), the contracting officer shall insert the clause at 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment, in all solicitations and contracts. Sellers understand that the Marketplace ranks all Bids by price; however, sellers will be evaluated by the Buyer in accordance with the basis established in the solicitation and pursuant to applicable acquisition regulations and/or departmental guidelines. The award decision is the sole discretion of the Buyer.

More opportunities from Department Of Defense → Navsup Flt Logistics Ctr Jacksonville

Same awarding agency

NAICS: 332323
Federal
Precision Metal Framing and Housing FabricationThe contract involves the fabrication of precision metal frames and enclosures specifically designed for the Heated Window Assembly, ensuring the components meet exacting standards for structural integrity and seamless integration into naval vessel systems. The work requires advanced manufacturing capabilities to produce components that are compatible with the demanding environmental and operational conditions of naval platforms, with strict attention to dimensional accuracy, material specification, and durability. The frames and housings must be engineered to support heating functionality while maintaining mechanical stability under vibration, thermal cycling, and corrosive sea exposure. Performance of the work is designated to take place in Jacksonville, Florida, with the contract issued under the NAICS code 332323 for fabricated metal product manufacturing. This is a subcontract arrangement within the Department of Defense procurement ecosystem, administered by Naval Supply Systems Command Fleet Logistics Center Jacksonville. The contract was posted on July 13, 2026, and the technical requirements reflect critical support for naval fleet readiness, where component reliability directly impacts crew safety and operational effectiveness. All deliverables must align with applicable military specifications and undergo rigorous quality verification prior to acceptance.
Ornamental and Architectural Metal Work Manufacturing

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 327215
Federal
Tempered, Heated Glass Fabrication for Aerospace WindowThe contract involves the fabrication of precision tempered glass with integrated heating capability for use in the Heated Window Assembly identified by Part No. CC-10367-1, specifically for aerospace applications. The work is scoped under a subcontract with a NAICS code of 327215, indicating classification within the glass product manufacturing industry, and is tied to the Department of Defense through the Naval Supply Systems Command Fleet Logistics Center Jacksonville. Performance of the contract is designated to occur in Jacksonville, Florida, with a zip code of 32228, and the solicitation was posted on July 13, 2026. The heated glass component must meet stringent aerospace standards for durability, optical clarity, and thermal performance under extreme environmental conditions. As a subcontract, the primary contractor is expected to manage compliance, quality assurance, and delivery timelines aligned with DoD requirements, though no set-aside type or specific point of contact is detailed. The contract supports critical defense systems requiring reliable window assemblies that maintain functionality through icing, temperature fluctuations, and high-stress operational environments. Execution will require advanced manufacturing techniques to integrate heating elements into tempered glass without compromising structural integrity or optical performance.
Glass Product Manufacturing Made of Purchased Glass

POSTED

4 months ago

DEADLINE

N/A
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS