Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on May 17, 2007. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

J -- REPAIR D7G DOZER NAS PWT

Awarded
N69450-07-T-3594Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management and Training Corporation is soliciting lump sum fee proposals for the clutch replacement of a Kubota M8200 tractor with front wheel assist, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires a qualified contractor to provide all transportation, labor, materials, and equipment to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as needed. The contractor must perform all work according to manufacturer specifications and provide a final summary of diagnostic findings, an itemized list of replaced parts, and warranty documentation upon completion. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified entities. Bids must be submitted via email to Angie Mahoney by 3:00 PM CST on November 3, 2026, and must include a bid sheet, proof of insurance, a completed supplier packet with a W-9, and applicable SBA certification letters. Award decisions will be based on best value, with a focus on administrative compliance and technical qualifications. The contract is subject to various Federal Acquisition Regulations, including standards for combating trafficking in persons, Buy American restrictions, and Service Contract Labor Standards per Wage Determination 2015-4687 Revision 31 for Kentucky.
Earle C. Clements Job Corps Center

POSTED

about 5 hours ago

DEADLINE

in 5 days
NAICS: 811310
New
SLED
SMDOT Elevator Maintenance
Solicitation # 12701633
The City of Santa Monica Department of Transportation (SMDOT) is soliciting bids for turnkey maintenance, inspection, and repair services for three hydraulic elevators located at 1620 6th Street. The equipment includes two passenger elevators and one freight elevator, specifically models AAK137, AA2986, and AEP227. The scope of work requires monthly systematic examination, lubrication, and repair of critical components, as well as monthly emergency recall and override testing in accordance with California Administrative Code Title 8, Section 3000(h). All provided materials must be new and meet Original Equipment Manufacturer standards. Bids must be submitted electronically via the OpenGov portal by December 3, 2026, at 3:00 pm. Qualified bidders must possess a valid C-11 California contractor's license and provide a maintenance supervisor to ensure compliance with safety requirements. The contract award is based on a weighted evaluation of experience and technical competence (25%), ability to meet work plans and timelines (25%), cost (20%), stability and references (10%), value add (10%), and quality control (10%). The City is not required to select the lowest monetary bidder. Key contractual requirements include a payment bond for awards exceeding 25,000 dollars, a Living Wage Certification for awards over 54,200 dollars, and compliance with the Oaks Initiative and ADA Title II. Successful bidders must provide a Certificate of Insurance naming the City of Santa Monica as an additional insured. Payment terms are net thirty days. The agreement includes an initial term with four subsequent annual renewal options.
D600 DEPT OF TRANSPORTATION - SaMoDOT

POSTED

about 13 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
CNG Fueling Station Maintenance and Repair Services
Solicitation # 2026-RFP-0441
The County of Sacramento is soliciting proposals under solicitation 2026-RFP-0441 to establish a contract for Compressed Natural Gas (CNG) fueling station preventative maintenance and repair services. The contract covers two facilities located at the Fleet Services Division and the Department of Airports. The selected contractor must provide certified CNG technicians to perform twice-monthly preventative maintenance and major services at 4,000 and 8,000-hour benchmarks. Service requirements include 24/7 availability, with on-site response times mandated within 48 hours for standard service calls and 24 hours for emergency calls. All work must adhere to manufacturer specifications and Cal/OSHA safety standards, including the provision of GHS Safety Data Sheets. The contract is designed for an initial one-year term with the option for four additional one-year extensions upon mutual agreement, with a scheduled award date of December 14, 2026. Award decisions will be based on factors other than price alone, utilizing a points-based scoring system that evaluates cost and the proposer's technical approach. Bidders must provide a Public Works and Prevailing Wage Contractor Registration number and are encouraged to utilize the County's Procurement Opportunities Program for small and micro-business preferences. Proposals must be submitted electronically via the SacCountyE bids portal by the final extended deadline of November 13, 2026.
DGS: CAPSD - Procurement

POSTED

about 13 hours ago

DEADLINE

in 16 days
NAICS: 811310
New
SLED
ELEVATOR & ESCALATOR MAINTENANCE, INSPECTIONS, AND TESTING
Solicitation # BPM059230
The Maryland Transit Administration is soliciting bids for a firm fixed price contract to provide comprehensive maintenance, inspection, and testing for elevators, escalators, and wheelchair lifts primarily located in Baltimore City. The scope of work includes full maintenance and repairs to ensure equipment operates at original contract speeds and remains in safe, first-class condition. Key deliverables include a minimum of four on-site team hours per escalator monthly for preventative maintenance, semi-annual and annual deep cleaning of units, and strict adherence to ASME A17.1 and A17.2 safety codes. The contract features a five-year base period with no options and requires the contractor to provide certified mechanics, maintain emergency service capabilities, and adhere to Maryland Living Wage requirements. Award will be made by lot to the responsible bidder offering the most favorable price. The solicitation establishes a 17 percent Minority Business Enterprise (MBE) participation goal and a 1 percent Veteran-Owned Small Business Enterprise (VSBE) goal. Required submissions include a Project Execution Plan, performance bonds, and various certifications regarding conflict of interest and non-disclosure. Invoicing is handled via email to the Contract Monitor and Accounts Payable, with a specific allowance of 600,000 dollars provided for parts, materials, and sub-work. All work must comply with federal, state, and local laws, including ADA requirements for intercom systems and strict regulations regarding the handling and disposal of PCBs.
Maryland Transit Administration

POSTED

about 14 hours ago

DEADLINE

in 14 days
NAICS: 811310
New
SLED
WOOHDR30R - Overhead Door Repairs and Maintenance - MDOT/SHA Worcester County
Solicitation # WOOHDR30R
Solicitation WOOHDR30R is an Invitation for Bids issued by the Maryland State Highway Administration for the preventative maintenance and repair of 27 overhead doors and their related operators at the Worcester County Shop locations in Snow Hill and Berlin. The scope of work requires semi-annual 20-point inspections and on-call repair services with a mandatory response time of four business days. All repairs must be performed by technicians with at least two years of experience, adhere to manufacturer specifications and building codes, and utilize new, first-quality parts. The contractor is required to provide a not-to-exceed cost quotation before performing any repair work and must submit detailed written reports following each service visit. The contract will be awarded to the responsive and responsible vendor offering the lowest total bid price. To qualify, bidders must demonstrate at least two years of continuous professional experience in overhead door services, be registered with the State Department of Assessments and Taxation, and possess their own employees, equipment, and vehicles without the use of subcontractors. Required submission documents include the eMMA Price Form, a Bid/Proposal Affidavit, and reference checks from the last five years. Payment is processed through the Snow Hill Shop, with specific billing requirements for trip charges, manlift usage, and materials priced at or below retail cost or MSRP. All work must comply with MOSH and OSHA safety regulations.
State Highway Administration

POSTED

about 15 hours ago

DEADLINE

in 20 days
NAICS: 811310
New
SLED
26WS0011-Floor Care Equipment Preventative Maintenance and Repair Services
Solicitation # 26WS0011
Solicitation 26WS0011 is issued by the California Department of Veterans Affairs (CalVet) for a contractor to provide comprehensive preventative maintenance, inspection, repair, and operational support for commercial floor care equipment in Los Angeles, California. The scope of work covers a fleet of carpet extractors, auto scrubbers, floor machines, and specialty vacuums. The contractor is responsible for providing all necessary labor, materials, and transportation, though consumable supplies like chemicals and batteries are excluded unless specifically authorized. Key performance standards include a two-hour onsite response for emergencies, a one-business-day response for non-emergencies, and a 100% completion rate for scheduled preventative maintenance. The contract will be awarded to the lowest responsible bidder, with a five percent preference given to certified Small or Micro businesses and a priority award to Disabled Veteran Business Enterprises (DVBE) in the event of a tie. Bidders must submit their proposals via email by November 16, 2026, including a completed Rate Sheet, Bidder Certification form, and a valid California business license. The contractor must maintain a Commercial General Liability insurance policy of at least $1,000,000 per occurrence and employ qualified technicians. Payment is processed through monthly invoices submitted to the CalVet Contract Manager, with a $10,000 withholding from the final payment for prime contractors until DVBE subcontracting reports are certified.
California Department of Veterans Affairs

POSTED

about 15 hours ago

DEADLINE

in 19 days

General Info

Contract Value

$11,400

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

NAVAL AIR STATION FEAD 427 ALLEN ROADMERIDIAN MS 39309, FL

Set-Aside

SBA

Award Issued Date

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded
Posted

Combined Synopsis

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navfacsyscom Southeast
ContactsNo contacts available
OfficeNAS JACKSONVILLE, FL, 32212-0030, USA
Office AddressNAS JACKSONVILLE, FL, 32212-0030, USA
ContactsNo contact information available

Full Description

Show more
THIS SOLICITIATION IS 100% SET-ASIDE FOR SMALL BUSINESS CONCERNS.The contractor shall provide all labor, materials, supervision, transportation and equipment required to: a) Pickup D7G Dozer located at Joe Williams Field, Kemper County, Mississippi, breakdown Dozer and provide detailed cost proposal for repairs. Determination will be made by Contracting Officer to order repair costs as detailed on cost proposal. If repairs are not made, Contractor will return D7G Dozer to government. If repairs are ordered, contractor will perform repairs and ensure D7 Dozer is in working condition and return to location specified by government representative. Contractor must designate location for performance of repairs and location must be within 150 miles from NAS Meridian, MS. At no time should equipment leave that 150 mile radius. Solicitation contains past performance requirements as stipulated under Section M. The entire solicitation is available for viewing and downloading at www.esol.navfac.navy.mil. Prospective Offerors MUST register themselves on the web site. The official plan holder's list will be maintained and can be printed from the web site. Amendments will be posted on the web site for downloading. This will normally be the only method of distributing amendments; therefore, IT IS THE OFFEROR?S RESPONSIBILITY TO CHECK THE WEB SITE PERIODICALLY FOR ANY AMENDMENTS TO THIS SOLICITATION. Contractor must be registered and active in CCR in order for award to be made. Technical Inquiries must be submitted in writing prior to 24 May 2007, to the address listed above, or faxed to +1 (555) 000-0000, Attn: Lisa Harris, or email: contact@example.gov The estimated date for Receipt of Quotations is 31 May 2007. The estimated price range is less than $100,000.00. The period of contract performance for Line Item 0001 is 30 calendar days after contract award and 30 calendar days for Line Item 0002 if ordered. The North American Industry Classification System (NAICS) Code for this Solicitation is 811310. The associated Small Business size standard is $6.5 million.*****

More opportunities from Department Of Defense → Navfacsyscom Southeast

Same awarding agency

NAICS: 334512
New
Federal
Facility Related Control System (FRCS) Programable Building Controllers Naval Air Station (NAS) Corpus Christi, TX
Solicitation # N6945027RPW03
Navfacsyscom Southeast is conducting a sources sought notice under solicitation N6945027RPW03 to identify commercially available programmable building controllers for the Facility Related Control Systems at Naval Air Station Corpus Christi, Texas. The primary objective is to determine the availability of controllers that can fully interface with the government licensed Johnson Controls Facility Explorer (JCI FX) 80/90 software for programming, database, graphics, and configuration. Required hardware must function as a Network Automation Engine and support BACnet and Modbus TPC/IP communication protocols. Interested vendors must submit a capabilities statement package not exceeding five pages by 2:00 PM Eastern Time on November 18, 2026. The submission must include completed company information and technical data, specifically a list of compatible controllers and documentation of one to three installed HVAC systems where JCI FX 80/90 was used to configure non-JCI controllers. Responses must be sent electronically to [email hidden] with a maximum attachment size of 4MB. All potential contractors must be registered in the System for Awards Management (SAM) and provide their CAGE and NAICS codes.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 23 hours ago

DEADLINE

in 20 days
View Details
NAICS: 6221
New
Federal
Solicitation for Offers - Office/Medical Space Approximately 12,000 Rentable Square Feet (RSF) in Crestview, FL
Solicitation # N69450-27-RP-00023
The Department of the Navy, through the Naval Facilities Engineering Systems Command Southeast, is soliciting offers for approximately 12,000 rentable square feet of office and medical space in Crestview, Florida, to support Defense Health Agency medical provider requirements. The required space must be located within zip codes 32536 or 32539. The anticipated lease structure consists of an initial one-year term with 19 consecutive one-year renewal options, for a total duration not to exceed 20 years, with a target commencement date of September 30, 2027. The government will award the contract based on Best Value Trade-Off procedures, weighing technical factors and price with approximately equal importance. Key technical evaluation criteria include proximity to Eglin Air Force Base, the ability to meet the full square footage requirement at a single property, and the provision of at least 117 parking spaces, including five disabled spaces. Facilities must be single-story, meet ADA and NFPA 101 life safety codes, and buildings exceeding 10,000 square feet must be Energy Star certified or provide a renovation plan. Offerors must submit signed proposals electronically by November 16, 2026. Required documentation includes certifications regarding responsibility matters, SAM registration, and specific representations regarding small business status under NAICS code 531190. The lessor is expected to accept tenant improvements for medical use and ensure the premises are free of asbestos, except where managed under EPA guidance. Access to the facility is required 24 hours a day, 7 days a week.
General Medical and Surgical Hospitals

POSTED

about 23 hours ago

DEADLINE

in 18 days
View Details
NAICS: 332321
New
Federal
P7777 ACC SARP Replacement NAS Jacksonville, Florida - Accurate Lock & Hardware
Solicitation # N6945027SP7777-Accurate
The Naval Facilities Engineering Systems Command, Southeast is conducting a market survey for the Fiscal Year 2027 P7777 ACC SARP Replacement project at NAS Jacksonville, Florida. The government is seeking to identify potential sources of supply capable of providing a ligature-resistant sliding door system that meets or exceeds the performance of the LR-SDS / SL-LR-SDS manufactured by Accurate Lock and Hardware. This system is specifically required for behavioral health environments to eliminate ligature opportunities and prevent patient barricading through the use of concealed overhead tracks, locking hardware, and operating trim. Technical requirements include a 150 ft-lb impact test rating per ANSI A250.13-2014, dual ball-bearing carrier assemblies with a 1,240 lbs dynamic load capacity, and compliance with ANSI/UL 1784 air leakage testing where applicable. This notice is for market research purposes only and does not constitute a request for proposals or a binding contract. Interested respondents must submit detailed technical data, including a completed Attachment 1, to the designated points of contact by October 30, 2026, at 3:00 PM ET. Submissions are limited to five one-sided pages and must demonstrate compatibility with the existing system requirements.
Metal Window and Door Manufacturing

POSTED

2 days ago

DEADLINE

in 1 day
View Details
NAICS: 561621
New
Federal
P7777 ACC SARP Replacement NAS Jacksonville, Florida - AMAG Access Control Equipment panel
Solicitation # N6945027SP7777-AMAG-ACCESS
The Naval Facilities Engineering Systems Command, Southeast is conducting a market survey for the P7777 ACC SARP Replacement project at NAS Jacksonville, Florida. The government is seeking to identify potential sources of supply that can provide access control equipment panels with performance equal to specific AMAG Technology models, including the M2150-2DBC, M2150-4DBC, M2150-DBU/MKII, and M2150-8DBC/MKII. The required equipment must fully integrate with the existing AMAG Symmetry Enterprise system, including all software, hardware, databases, and licensing. Technical specifications require the panels to connect via LAN, control up to 16 doors, manage at least 20,000 card holders, support smart card and proximity readers with Wiegand support, and maintain UL 294 and UL 1076 listings with a 100 Mbps network connection. This is a sources-sought notice for market research purposes and does not constitute a request for proposals or a binding contract. Interested respondents must submit detailed technical data and a completed company information form, including their CAGE code, SAM registration status, NAICS code, and bonding capacity. Submissions are limited to five one-sided pages and must be emailed to the designated points of contact, Jeff Rhein and Reuben Amarh, by October 30, 2026, at 3:00 PM ET. The government will evaluate the submissions to determine if alternative products can meet the operational requirements of the existing video surveillance and access control infrastructure.
Security Systems Services (except Locksmiths)

POSTED

2 days ago

DEADLINE

in 1 day
View Details
NAICS: 334512
New
Federal
P7777 ACC SARP Replacement NAS Jacksonville, Florida - Metasys
Solicitation # N69450SP7777-Metasys
The Naval Facilities Engineering Systems Command, Southeast is conducting a market survey for the Fiscal Year 2027 P7777 ACC SARP Replacement project at NAS Jacksonville, Florida. The government is seeking to identify potential sources capable of providing a building automation control system with performance equal to the Johnson Controls Metasys system. Key technical requirements include scalability for seamless connection of field controllers to supervisory servers, open integration supporting industry standards like BACnet, encrypted communications with multi-factor authentication, and a centralized interface dashboard for security risk management. Crucially, the system must provide seamless connectivity to the existing Metasys system currently serving the main hospital in Building 2080. This is a sources-sought notice for market research purposes and does not constitute a request for proposals or a binding contract. Interested respondents must submit detailed technical data, a completed company information attachment including CAGE and NAICS codes, and bonding capacity details to the designated points of contact by October 30, 2026, at 3:00 PM ET. Submissions are limited to five one-sided pages and must exclude company brochures. The government is evaluating a wide range of business sizes, including various small business categories and large businesses, to determine if alternative products can meet these specific operational and integration requirements.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

2 days ago

DEADLINE

in 1 day
View Details
NAICS: 561621
New
Federal
P7777 ACC SARP Replacement NAS Jacksonville, Florida - AMAG Symmetry Enterprise video surveillance system
Solicitation # N6945027SP7777-AMAG
The Naval Facilities Engineering Systems Command, Southeast is conducting a market survey for the Fiscal Year 2027 P7777 ACC SARP Replacement project at NAS Jacksonville, Florida. The government is seeking potential sources capable of providing a Network Video Recorder and PoE video surveillance cameras, including both indoor/outdoor dome and multisensor models, that offer equal performance to AMAG Technology and AXIS Communications products. A critical requirement is that all hardware and software must fully integrate with the existing AMAG Symmetry Enterprise video surveillance system, including all monitoring stations and licensing. The required Network Video Recorder must feature a Xeon E-2488 Processor, 64 GB of RAM, Windows Server 2019 Standard Embedded OS, and a minimum 5 year warranty. Dome cameras must provide 2 MP color images with IK10 vandal rating and FIPS 140-3 Level 3 security features, while multisensor cameras require 13 MP color images with seamless stitching and FIPS 140-2 Level 2 security. This is a sources-sought notice for market research purposes and not a request for proposals. Interested parties must submit detailed technical data and a completed company information form, including SAM registration and bonding capacity details, to the designated points of contact by October 30, 2026, at 3:00 PM ET.
Security Systems Services (except Locksmiths)

POSTED

2 days ago

DEADLINE

in 1 day
View Details
NAICS: 236220
New
Federal
P233 AIR TRAFFIC CONTROL TOWER AND FLIGHT SIMULATOR FACILITY AT KEESLER AIR FORCE BASE, BILOXI, MS
Solicitation # N6945027RP233
The Naval Facilities Engineering Systems Command Southeast is conducting a market survey to identify qualified contractors for a design-bid-build project at Keesler Air Force Base in Biloxi, Mississippi. The project involves the construction of a new 3,983 square foot Air Traffic Control Tower and a 9,709 square foot Flight Simulator Facility. Key technical requirements include a drilled piling foundation, reinforced concrete and structural steel framing, a 500 KW backup generator, and compliance with Miami-Dade Hurricane codes and Department of Defense Antiterrorism/Force Protection standards. The scope also encompasses a new perimeter fence, utilities, and site improvements. The estimated construction value is between 20 million and 50 million dollars, with an anticipated performance period of 1,219 calendar days and an expected award date in the third quarter of fiscal year 2027. This is a sources sought announcement only and not a request for proposals. Interested parties, including various small business categories, must submit a capability statement by November 3, 2026. Submissions must demonstrate the ability to self-perform at least 15 percent of the work and provide evidence of previous experience managing vertical construction projects of at least 20 million dollars on active airfields within the last seven years.
Commercial and Institutional Building Construction

POSTED

2 days ago

DEADLINE

in 6 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS