Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Veterans Affairs was posted on November 20, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

J041--Chiller System Maintenance

Closed
36C24126Q0098Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management and Training Corporation is soliciting lump sum fee proposals for the clutch replacement of a Kubota M8200 tractor with front wheel assist, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires a qualified contractor to provide all transportation, labor, materials, and equipment to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as needed. The contractor must perform all work according to manufacturer specifications and provide a final summary of diagnostic findings, an itemized list of replaced parts, and warranty documentation upon completion. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified entities. Bids must be submitted via email to Angie Mahoney by 3:00 PM CST on November 3, 2026, and must include a bid sheet, proof of insurance, a completed supplier packet with a W-9, and applicable SBA certification letters. Award decisions will be based on best value, with a focus on administrative compliance and technical qualifications. The contract is subject to various Federal Acquisition Regulations, including standards for combating trafficking in persons, Buy American restrictions, and Service Contract Labor Standards per Wage Determination 2015-4687 Revision 31 for Kentucky.
Earle C. Clements Job Corps Center

POSTED

about 6 hours ago

DEADLINE

in 5 days
NAICS: 811310
New
SLED
SMDOT Elevator Maintenance
Solicitation # 12701633
The City of Santa Monica Department of Transportation (SMDOT) is soliciting bids for turnkey maintenance, inspection, and repair services for three hydraulic elevators located at 1620 6th Street. The equipment includes two passenger elevators and one freight elevator, specifically models AAK137, AA2986, and AEP227. The scope of work requires monthly systematic examination, lubrication, and repair of critical components, as well as monthly emergency recall and override testing in accordance with California Administrative Code Title 8, Section 3000(h). All provided materials must be new and meet Original Equipment Manufacturer standards. Bids must be submitted electronically via the OpenGov portal by December 3, 2026, at 3:00 pm. Qualified bidders must possess a valid C-11 California contractor's license and provide a maintenance supervisor to ensure compliance with safety requirements. The contract award is based on a weighted evaluation of experience and technical competence (25%), ability to meet work plans and timelines (25%), cost (20%), stability and references (10%), value add (10%), and quality control (10%). The City is not required to select the lowest monetary bidder. Key contractual requirements include a payment bond for awards exceeding 25,000 dollars, a Living Wage Certification for awards over 54,200 dollars, and compliance with the Oaks Initiative and ADA Title II. Successful bidders must provide a Certificate of Insurance naming the City of Santa Monica as an additional insured. Payment terms are net thirty days. The agreement includes an initial term with four subsequent annual renewal options.
D600 DEPT OF TRANSPORTATION - SaMoDOT

POSTED

about 14 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
CNG Fueling Station Maintenance and Repair Services
Solicitation # 2026-RFP-0441
The County of Sacramento is soliciting proposals under solicitation 2026-RFP-0441 to establish a contract for Compressed Natural Gas (CNG) fueling station preventative maintenance and repair services. The contract covers two facilities located at the Fleet Services Division and the Department of Airports. The selected contractor must provide certified CNG technicians to perform twice-monthly preventative maintenance and major services at 4,000 and 8,000-hour benchmarks. Service requirements include 24/7 availability, with on-site response times mandated within 48 hours for standard service calls and 24 hours for emergency calls. All work must adhere to manufacturer specifications and Cal/OSHA safety standards, including the provision of GHS Safety Data Sheets. The contract is designed for an initial one-year term with the option for four additional one-year extensions upon mutual agreement, with a scheduled award date of December 14, 2026. Award decisions will be based on factors other than price alone, utilizing a points-based scoring system that evaluates cost and the proposer's technical approach. Bidders must provide a Public Works and Prevailing Wage Contractor Registration number and are encouraged to utilize the County's Procurement Opportunities Program for small and micro-business preferences. Proposals must be submitted electronically via the SacCountyE bids portal by the final extended deadline of November 13, 2026.
DGS: CAPSD - Procurement

POSTED

about 14 hours ago

DEADLINE

in 15 days
NAICS: 811310
New
SLED
ELEVATOR & ESCALATOR MAINTENANCE, INSPECTIONS, AND TESTING
Solicitation # BPM059230
The Maryland Department of Transportation Maryland Transit Administration (MDOT MTA) is soliciting bids for a firm-fixed-price contract, AGY-26-001-MT, to provide comprehensive maintenance, inspection, and testing for elevators, escalators, and wheelchair lifts across various Metro stations in Maryland. The scope of work includes systematic preventive maintenance, emergency repairs, and deep cleaning to ensure all equipment remains in first-class operating condition in accordance with ASME A17.1 and A17.2 standards. The contract features a five-year base period with a total basis of award calculated at 4,750,000 dollars, which includes a 950,000 dollar allowance for reimbursable parts and materials. Bidders must maintain an operational office within 20 miles of Baltimore and provide certified mechanics with at least three years of documented experience. Award will be granted to the responsible bidder offering the lowest total price. Key procurement goals include a 17 percent Minority Business Enterprise (MBE) and a 1 percent Veteran-owned Small Business Enterprise (VSBE) participation rate. Bidders must possess at least three years of firm experience with comparable equipment and provide proof of significant insurance coverage, including 1 million dollars in general liability and 5 million dollars in pollution liability. Bids are due by November 12, 2026, and must include a bid bond, a contract affidavit, and detailed pricing for preventive maintenance and hourly labor rates. Performance is measured by the completion of specific checklist tasks rather than labor hours, and the contractor is required to submit safety reports within 24 hours of any incident.
Maryland Transit Administration

POSTED

about 16 hours ago

DEADLINE

in 14 days
NAICS: 811310
New
SLED
WOOHDR30R - Overhead Door Repairs and Maintenance - MDOT/SHA Worcester County
Solicitation # WOOHDR30R
Solicitation WOOHDR30R is an Invitation for Bids issued by the Maryland State Highway Administration for the preventative maintenance and repair of 27 overhead doors and their related operators at the Worcester County Shop locations in Snow Hill and Berlin. The scope of work requires semi-annual 20-point inspections and on-call repair services with a mandatory response time of four business days. All repairs must be performed by technicians with at least two years of experience, adhere to manufacturer specifications and building codes, and utilize new, first-quality parts. The contractor is required to provide a not-to-exceed cost quotation before performing any repair work and must submit detailed written reports following each service visit. The contract will be awarded to the responsive and responsible vendor offering the lowest total bid price. To qualify, bidders must demonstrate at least two years of continuous professional experience in overhead door services, be registered with the State Department of Assessments and Taxation, and possess their own employees, equipment, and vehicles without the use of subcontractors. Required submission documents include the eMMA Price Form, a Bid/Proposal Affidavit, and reference checks from the last five years. Payment is processed through the Snow Hill Shop, with specific billing requirements for trip charges, manlift usage, and materials priced at or below retail cost or MSRP. All work must comply with MOSH and OSHA safety regulations.
State Highway Administration

POSTED

about 16 hours ago

DEADLINE

in 20 days
NAICS: 811310
New
SLED
26WS0011-Floor Care Equipment Preventative Maintenance and Repair Services
Solicitation # 26WS0011
Solicitation 26WS0011 is issued by the California Department of Veterans Affairs (CalVet) for a contractor to provide comprehensive preventative maintenance, inspection, repair, and operational support for commercial floor care equipment in Los Angeles, California. The scope of work covers a fleet of carpet extractors, auto scrubbers, floor machines, and specialty vacuums. The contractor is responsible for providing all necessary labor, materials, and transportation, though consumable supplies like chemicals and batteries are excluded unless specifically authorized. Key performance standards include a two-hour onsite response for emergencies, a one-business-day response for non-emergencies, and a 100% completion rate for scheduled preventative maintenance. The contract will be awarded to the lowest responsible bidder, with a five percent preference given to certified Small or Micro businesses and a priority award to Disabled Veteran Business Enterprises (DVBE) in the event of a tie. Bidders must submit their proposals via email by November 16, 2026, including a completed Rate Sheet, Bidder Certification form, and a valid California business license. The contractor must maintain a Commercial General Liability insurance policy of at least $1,000,000 per occurrence and employ qualified technicians. Payment is processed through monthly invoices submitted to the CalVet Contract Manager, with a $10,000 withholding from the final payment for prime contractors until DVBE subcontracting reports are certified.
California Department of Veterans Affairs

POSTED

about 16 hours ago

DEADLINE

in 19 days

General Info

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

ME

Set-Aside

NONE

Documents

1

Solicitation 36C24126Q0098 Chiller System Maintenance

DOCX, High priority: read this first14 pages · rfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

special-notice

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Veterans Affairs → 241-NETWORK Contract Office 01 (36C241)
Contacts1 person available
OfficeTOGUS, ME, 04330, USA
Office AddressTOGUS, ME, 04330, USA
Contacts
Issa ShawkiContracting Officer

Full Description

Show more

The Department of Veterans Affairs, Networking Contracting Office (NCO 01) located in Brockton, MA intends to enter into a sole source procurement, pursuant to the authority of FAR 6.302-1, with TRANE U.S. Inc., for the following requirement:
STATEMENT OF WORK Chiller Maintenance EQUIPMENT
Equipment Qty Manufacturer Model Number Serial Number Asset Tag Air-Cooled Chiller 1 Trane CGAM030B2G U12F30551 EYE CLINIC Air-Cooled Chiller 1 Trane CGAM060A2P U16D54225 BLDG 3, CH 1 Air-Cooled Chiller 1 Trane CGAM080F2H U12K32472 SPD ADDITION Air-Cooled Chiller 1 Trane CGAM080F2H U12K32473 SPD ADDITION Air-Cooled Chiller 1 Trane CGAM130F2A U24E02145 BUILDING 5 CH-1 Air-Cooled Series R(TM) 1 Trane RTAC2004UR U08M02830 BLDG 2, CH 1 Air-Cooled Series R(TM) 1 Trane RTAC2004UK U05F02407 BLDG 7, CH 3 Air-Cooled Series R(TM) 1 Trane RTAC2004U1 U19E03810 CH-2
SCOPE OF WORK The Contractor shall provide all supervision, personnel, material, parts, equipment, supplies, labor, and transportation in performing basic preventive maintenance on the chiller systems and equipment listed in this Statement of Work located at the Department of Veterans Affairs Medical Center, 940 Belmont Street, Brockton MA 02301 in accordance with all terms and conditions of this task order and accepted quotation. Period of Performance: This will be a firm-fixed-price, base year plus four option years task order.

The following is the scope of services to be performed on Covered Equipment. Items marked with an X are included in this contract.

Services Included Cooling Seasonal Service X Seasonal Start-up X Operating Inspections Qty X System Shutdown X Annual Coil Cleaning Seasonal Maintenance
Services Included Labor and Materials for Covered Equipment X Scheduled Maintenance Labor X Scheduled Maintenance Parts and Materials
Services Included Predictive Testing and Analysis for Covered Equipment Chiller(s) Only X Spectrographic Oil Analysis. X Refrigerant Analysis Provides early warning of internal failure. X KestrelView Analysis Requires Trane laptop and Trane software X Oil Removal and Disposal by Trane by EPA Guidelines
Services Included Additional Services X Air Cooled Condenser Coil Cleaning once per year
VA Brockton Hospital Equipment
The following "Covered Equipment" will be serviced at VA Hospital Brockton: Equipment Qty Manufacturer Model Number Serial Number Asset Tag Air-Cooled Series R(TM) 1 Trane RTAC2004UK U05F02407 BLDG 7, CH 3
Service Description Quantity Per Term Oil Sample/Spectrographic Analysis for RTAC (Service 1) 1 RTAC (7310) Annual Maintenance (Service 8) 1 RTAC Seasonal Start-Up (Service 10) 1 Oil Filter Replacement (Per Compressor) (Service 11) 1 RTAC Seasonal Shut Down (Service 12) 1 RTAC Quarterly Inspection (Service 15) 4
Equipment Qty Manufacturer Model Number Serial Number Asset Tag Air-Cooled Series R(TM) 1 Trane RTAC2004UR U08M02830 BLDG 2, CH 1
Service Description Quantity Per Term Oil Sample/Spectrographic Analysis for RTAC (Service 1) 1 RTAC (7310) Annual Maintenance (Service 9) 1 RTAC Seasonal Start-Up (Service 10) 1 Oil Filter Replacement (Per Compressor) (Service 11) 1 RTAC Seasonal Shut Down (Service 12) 1 RTAC Quarterly Inspection (Service 15) 4
Equipment Qty Manufacturer Model Number Serial Number Asset Tag Air-Cooled Chiller, Scroll Compressors 1 Trane CGAM030B2G U12F30551 EYE CLINIC Air-Cooled Chiller, Scroll Compressors 1 Trane CGAM060A2P U16D54225 BLDG 3, CH 1 Air-Cooled Chiller, Scroll Compressors 1 Trane CGAM080F2H U12K32472 SPD ADDITION Air-Cooled Chiller, Scroll Compressors 1 Trane CGAM080F2H U12K32473 SPD ADDITION Air-Cooled Chiller, Scroll Compressors 1 Trane CGAM130F2A U24E02145 BUILDING 5 CH-1
Service Description Quantity Per Term CGAM Oil sample/analysis (Service 2) 1 Air Cooled Scroll Seasonal Start Up (Service 3) 1 CGAM Coil Cleaning (Service 4) 1 CGAM Quarterly Inspection (Service 5) 4 Air Cooled Scroll Seasonal Shut Down (Service 6) 1
Equipment Qty Manufacturer Model Number Serial Number Asset Tag Air-Cooled Series R(TM) - Brazil 1 Trane RTAC2004U1 U19E03810 CH-2
Service Description Quantity Per Term R MACHINE REF SAMPLE (Service 7) 1 Oil Filter Replacement (Per Compressor) (Service 11) 1 RTAC Seasonal Shut Down (Service 12) 1 RTAC Seasonal Start Up (Service 13) 1 RTAC Annual (Solution Coil Cleaning) (Service 14) 1 RTAC Quarterly Inspection (Service 16) 4
SERVICE FLOW DETAILS Service 1: Oil Sample/Spectrographic Analysis for RTAC Description Pull oil sample for spectrographic analysis. Service 2: CGAM Oil sample/analysis Description Pull oil sample for spectrographic analysis. Service 3: Air Cooled Scroll Seasonal Start Up Description Customer Notification Initial Site Safety Inspection Lock Out Tag Out (Standard) Electrical Inspection - Control Panel Inspect Strainer and Pump - BPHE Seasonal Startup Remove LOTO and Check Heater Operation Compressor Oil Level Pre-Start TechView/KestrelView Connection Pre-Start Chiller Check CGAM Seasonal Start Unit-CGAM Compressor Oil Level Check Service 4: CGAM Coil Cleaning Description Customer Notification Initial Site Safety Inspection Lock Out Tag Out (Standard) Coil Cleaning Solution Remove Lock Out Tag Out Return Unit to Normal Operation
Service 5: CGAM Quarterly Inspection Description Customer Notification of Unit Maintenance Visual Condenser Coil Check Shut Down Unit Compressor Oil Level Check- Air-Cooled Scroll Return Unit to Normal Operation TechView/KestrelView Connection Review Diagnostics Check Fans for Rubbing Check EXV Sight Glass Run Service Report From TechView Techview/Kestrel View Disconnection
Service 6: Air Cooled Scroll Seasonal Shut Down Description Initial Site Inspection Review Diagnostics (Standard) Lock Out Tag Out (Standard) Check Heater Strips
Service 7: R MACHINE REF SAMPLE Description R MACHINE REF SAMPLE Pull oil sample for spectrographic analysis.
Service 8: RTAC (7310) Annual Maintenance Description Customer Notification Initial Site Inspection Review Diagnostics Lock out tag out at main disconnect. Electrical Inspection (RTA*) Control Panel Calibration Check Remove lock out tag out at main disconnect. Compressor Starter Inspection (Wye-Delta Closed Transition) Series R Air Cooled Compressor And Oil Separator Heater Check Flow/Differential Mechanical Switch Check Compressor Check (HeliRotor Compressors) Water pressure drop validation. Oil Level Check Per Compressor Condenser Fans Check RTA* Per Circuit Oil Analysis Per Compressor Visual Condenser Coil Check Oil Return Operation Check Per Circuit Coil Cleaning Solution Low Temperature Sensor Calibration Sub-cooling check Start Unit Leak Test Inspection (Positive Pressure) TechView/KestrelView Connection Run Service Report From TechView Techview/Kestrel View Disconnection Complete required paper work Service 9: RTAC (7310) Annual Maintenance Description Customer Notification Initial Site Inspection TechView/KestrelView Connection Run Service Report From TechView Review Diagnostics Lock out tag out at main disconnect. Electrical Inspection (RTA*) Control Panel Calibration Check Remove lock out tag out at main disconnect. Compressor Starter Inspection (Wye-Delta Closed Transition) Series R Air Cooled Compressor And Oil Separator Heater Check Flow/Differential Mechanical Switch Check Compressor Check (HeliRotor Compressors) Water pressure drop validation. Oil Level Check Per Compressor Condenser Fans Check RTA* Per Circuit Oil Analysis Per Compressor Visual Condenser Coil Check Oil Return Operation Check Per Circuit Coil Cleaning Solution Low Temperature Sensor Calibration Sub-cooling check Start Unit Leak Test Inspection (Positive Pressure) TechView/KestrelView Connection Run Service Report From TechView Techview/Kestrel View Disconnection Complete required paper work
Service 10: RTAC Seasonal Start-Up Description Customer Notification Initial Site Inspection Start-Up Sequence (RTAC) Review Diagnostics Lock Out Tag Out (Standard) Condenser Fans Check RTA* Per Circuit Compressor And Oil Separator Heater Check Check oil levels Condenser Coil Check Compressor Check (HeliRotor Compressors) Oil return operation check Sub-Cooling Check Remove Lock Out Tag Out and Restore Power Complete Required Paper Work Review Diagnostics Complete Required Paper Work Service 11: Oil Filter Replacement (Per Compressor) Description Customer Notification Initial Site Inspection Serviceman Pump Down Enable Front Panel Circuit Lock Out Transfer After Serviceman Pump Down Oil Filter Change-RTAC, RTAE, RTUD, RTWD Evacuate Compressor after Repair Open Valves After Pump Down or Transfer Run Circuit and Check Oil Pressure Drop Oil Level Check (Screw Machines) Per Circuit Disable Front Panel Circuit Lock Out Return Unit to Normal Operation
Service 12: RTAC Seasonal Shut Down Description Initial Site Inspection Customer Notification Of Chiller Shut Down Including Lock Out TechView/KestrelView Connection Review Diagnostics Run Service Report From TechView Techview/Kestrel View Disconnection Complete Required Paper Work Service 13: RTAC Seasonal Start Up Description Customer Notification Review Diagnostics Lock Out Tag Out (Standard) Remove Panels Generic Remove Lock Out Tag Out and Restore Power TechView/KestrelView Connection Verify Pump Operation and Water Flows-Seasonal Startup Compressor And Oil Separator Heater Check Start-Up Sequence (RTAC) Techview/Kestrel View Disconnection Lock Out Tag Out (Standard) Reinstall Panels Generic Remove Lock Out Tag Out and Restore Power Complete Required Paper Work
Service 14: RTAC Annual (Solution Coil Cleaning) Description Customer Notification Initial Site Inspection Review Diagnostics Lock Out Tag Out At Main Disconnect Electrical Inspection (RTA*) Compressor Starter Inspection (Wye-Delta Closed Transition) Series R Air Cooled Flow/Differential Mechanical Switch Check Remove Lock Out Tag Out At Main Disconnect Condenser Fans Check RTA* Per Circuit Visual Condenser Coil Check Oil Return Operation Check Per Circuit Oil Level Check Per Compressor Oil Analysis Per Compressor Low Temperature Sensor Calibration Control Panel Calibration Check Leak Test Inspection (Positive Pressure) Coil Cleaning Solution Start Unit Compressor Check (HeliRotor Compressors) Compressor And Oil Separator Heater Check TechView/KestrelView Connection Run Service Report From TechView Complete Required Paper Work
Service 15: RTAC Quarterly Inspection Description Customer Notification Initial Site Inspection Review Diagnostics Condenser Fans Check RTA* Per Circuit Lock Out Tag Out (Standard) Visual Electrical Inspection Visual Condenser Coil Check Remove Lock Out Tag Out Start Unit Complete Required Paper Work TechView/KestrelView Connection Run Service Report From TechView Techview/Kestrel View Disconnection Service 16: RTAC Quarterly Inspection Description Customer Notification Initial Site Inspection Review Diagnostics Condenser Fans Check RTA* Per Circuit Lock Out Tag Out (Standard) Visual Electrical Inspection Remove Lock Out Tag Out Start Unit Complete Required Paper Work TechView/KestrelView Connection Run Service Report From TechView Techview/Kestrel View Disconnection
The NAICS code for this requirement is 811310. Trane is the only contractor with the capability to perform the required services on the Trane controlled chillers. The VA owned Trane Ensemble system is a proprietary control system and will only have true full compatibility with other Trane Ensemble components, software and personnel. Other contractors are unable to perform this work due to not having access to Trane software and replacement supplies. Due to the proprietary nature of the work requiring a manufacturer and installer having qualified experience in programming Trane Ensemble and having access to Trane parts and codes/software, these proprietary issues would not allow for full and open competition.
This notice of intent is not a solicitation nor is it a request for proposal. However, interested parties that believe they can satisfy the requirement must clearly identify their capability to do so in writing by November 25, 2025 at 12 pm EST time. Response should be sent to Issa Shawki at contact@example.gov. Information submitted in response to this notice will be used solely to determine whether competitive procedures could be used for this acquisition. A determination not to open this requirement to competition based upon responses to this notice is solely within the discretion of the Government.

More opportunities from Department Of Veterans Affairs → 241-NETWORK Contract Office 01 (36C241)

Same awarding agency

NAICS: 238990
New
Federal
Replacement-in-Kind Repair of Existing Perimeter Security Fence (Ameristar Impasse Trident) Brand Name or Equal
Solicitation # 36C24127Q0041
The Department of Veterans Affairs VA Boston Healthcare System is soliciting a contract for a localized replacement-in-kind repair of the perimeter security fence at the Brockton VA Campus in Massachusetts. The project focuses on restoring five affected fence bays and six associated post locations that were damaged by winter snow-removal activities. The objective is to return the damaged sections to their original alignment, configuration, appearance, structural stability, and security function. The benchmark product is the Ameristar Impasse Trident system, and while genuine components are preferred, equal alternatives may be proposed if they meet all salient characteristics, including the use of corrosion-resistant tamper-resistant hardware and the maintenance of a continuous security boundary. This procurement is a total set-aside for certified Service-Disabled Veteran-Owned Small Businesses (SDVOSB) under NAICS code 238990. The period of performance is scheduled from December 1, 2026, to January 31, 2027. Award decisions will be based on the most advantageous offer, considering price, technical capability, and past performance, with a requirement for three relevant references. Proposals must be submitted in three separate PDF volumes (Technical, Past Performance, and Price) to the contract specialist by November 5, 2026. Final acceptance is contingent upon a satisfactory installation inspection, which may include a review by VA Police to ensure operational security.
All Other Specialty Trade Contractors

POSTED

1 day ago

DEADLINE

in 7 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS