This Solicitation opportunity from Department Of Veterans Affairs was posted on August 20, 2020. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

J061--Triennial Electrical Testing Topeka KS VAMC

Closed

36C25520Q0535Federal

Submission Closed08/26/2020, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310

New

SLED

Bus Fire Suppression System Maintenance

Solicitation # WMATA-0000010906

The Washington Metropolitan Area Transit Authority is seeking proposals for the maintenance of bus fire suppression systems under solicitation number WMATA-0000010906. This procurement falls under NAICS code 811310 and is managed through the agency's Virginia operations. The solicitation was posted on October 31, 2026, with a strict response deadline of November 4, 2026. Interested parties must submit their bids through the official supplier portal by the specified cutoff time to be considered for the contract.

Washington Metropolitan Area Transit Authority

POSTED

DEADLINE

Kubota M8200 Clutch Replacement

Solicitation # kubota-m8200-clutch-replacement

Management & Training Corporation is soliciting bids for the clutch replacement of a Kubota M8200 tractor with front wheel assist, no cab, and no loader, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires the contractor to provide all transportation, labor, supervision, tools, and materials to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include disassembling tractor components, replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as needed. All work must adhere to manufacturer specifications, and the final acceptance is contingent upon the Facility Maintenance Department verifying proper clutch engagement and PTO operation under load. This is a small business set-aside opportunity under NAICS code 811310, with award based on best value. Interested offerors must submit a bid sheet, a completed supplier packet including IRS Form W-9 and self-certification, proof of insurance, and any applicable SBA certification letters by November 3, 2026. The contract is subject to various federal regulations, including Service Contract Labor Standards under Wage Determination 2015-4687 Revision 31, FAR clauses regarding small business utilization, and strict security and confidentiality requirements regarding non-public information. Proposals must include an itemized breakdown of costs and warranty information for parts and labor.

Earle C. Clements Job Corps Center

POSTED

DEADLINE

Process Field Instrumentation & GaugesThis subcontract for Process Field Instrumentation and Gauges involves the supply and installation of critical process instrumentation, gauges, and sensors for prime contractors working on Porter-Tower Joint Municipal Authority WWTP projects in Schuylkill County, Pennsylvania. The scope of work includes the installation of pitot tube flow sensors, flow gage assemblies, diaphragm seals on non-potable water gauges, and full body line size pressure sensors on sludge piping, with the ultimate goal of delivering a fully installed and calibrated instrumentation system. The opportunity is categorized under NAICS code 811310 and was posted on October 30, 2026. Interested parties must submit their responses by the deadline of December 16, 2026, at 5:00 PM.

POSTED

DEADLINE

Conveyance Maintenance Services

Solicitation # 26-1336

Chicago Public Schools is soliciting bids for Conveyance Maintenance Services under solicitation number 26-1336 to implement a comprehensive preventive maintenance program for conveyance equipment. The selected bidder will provide all labor, materials, and supervision necessary to ensure equipment remains safe and operational, adhering to the City of Chicago Municipal Code, ASME A17.1/CSA B44, ASME A17.3, and original equipment manufacturer standards. The contract includes a three-year initial term with the possibility of two automatic renewals of two years each. Services involve monthly preventive maintenance during normal working hours from 6:00 a.m. to 2:30 p.m., as well as 24/7 emergency callback support. Key deliverables include site-specific maintenance schedules, the use of CPS facilities software for reporting, and an annual Executive Summary Report based on a 7-point assessment rubric. The agreement will be awarded to the lowest, responsive, and responsible bidder based on evaluation factors including price, business stability, professional qualifications, past performance, and capacity. Bidders must submit a comprehensive package via Bonfire, including an Excel-based bid tabulation, audited financial statements for the last three fiscal years, three non-Board references, and a W-9 tax form. Compliance with MBE/WBE aspirational goals of 30% and 7% respectively is required, along with adherence to the Illinois Minimum Wage Law and various federal and state non-discrimination acts. Invoicing must be submitted electronically in PDF format, with payments processed according to the Local Government Prompt Payment Act. All shipments are designated as F.O.B. destination. The deadline for questions is November 6, 2026, and the final response deadline is November 20, 2026.

Chicago Public Schools

POSTED

DEADLINE

Annual Inspection/Maint. and Repair on Generator at FMS #8

Solicitation # SRC0000037488

Solicitation SRC0000037488 is for the annual inspection, maintenance, and repair of a Speed Air air compressor (Model 1WD44, SN: D063475) at FMS #8 in Gadsden, Alabama. The scope of work includes replacing belts, collecting oil samples, and installing filters, cabinet filter mats, and repair kits for the oil and thermostatic valves. A mandatory site visit is required on November 18, 2026, at 10:00 AM at 5319 Airport Road, Gadsden, Alabama. The response deadline is November 23, 2026, and all bids must be submitted electronically through the Alabama Buys portal. The contract is managed by the Army MCA and the State of Alabama, with a maximum total value of 25,000 dollars over a potential five-year period, subject to annual renewals. Award evaluation will be based on price reasonableness, cost realism, and supplier qualifications, including professional licenses and insurance. Vendors must comply with the Code of Alabama, including the Beason-Hammon Alabama Taxpayer and Citizen Protection Act and registration requirements for foreign corporations. Payment will be handled electronically via P-cards, EFT, or state-issued credit cards. Final acceptance of services is contingent upon a satisfactory inspection by the State of Alabama in accordance with the Universal Commerce Code.

Army MCA_App 01_Real Property Operations & Maintenance, State Military Department

POSTED

DEADLINE

MIL-STD-1330D Oxygen Cleaning ServicesThis subcontract for the Defense Logistics Agency involves providing specialized cleaning and drying services for oxygen system components. The primary objective is to support prime contractors by ensuring all components are free of hydrocarbons and contaminants to prevent combustion in high-pressure environments. All work must be executed within certified oxygen-cleaning facilities using approved solvents in strict accordance with MIL-STD-1330D standards. The project falls under NAICS code 811310 and requires the delivery of certified Oxygen Clean components. Interested parties should note the response deadline of November 7, 2026, for this Department of Defense requirement.

Defense Logistics Agency

POSTED

DEADLINE

Electrical & Automation Services

Solicitation # 9181

The City of Denton is soliciting proposals for Electrical and Automation Services to support 12 Wartsila 18V50SG units located at the Denton Energy Center. The selected contractor must ensure all equipment operates within Original Equipment Manufacturer specifications without voiding existing warranties. Key performance requirements include providing personnel and service offers within one week of notice and completing repairs and services within five weeks of evaluation. The City will award the contract based on best value, evaluating submissions through a weighted scoring system: 30% for schedule timeliness, 30% for compliance with specifications, 20% for indicators of probable performance, and 20% for total cost of ownership. Submissions must be made via IONWAVE or hard copy by December 2, 2026, at 2:00 PM CT. Hard copy responses must be sealed, limited to 200 pages, and bound only with staples or binder clips. Required documentation includes proof of Texas state registration, a conflict of interest questionnaire, and a safety record. The contractor must comply with Davis-Bacon prevailing wage rates, the Buy American Act, and ADA non-discrimination practices. Invoicing must be submitted to the City's Accounts Payable department within 30 calendar days of service completion, with payments processed within 30 days of receipt. All deliverables must be shipped with weather-resistant labeling and a packing slip to the designated Denton address.

POSTED

DEADLINE

Boiler and Refractory Repair Services

Solicitation # TAMU-RFP-27-5144

Texas A&M University Procurement Services has issued solicitation TAMU-RFP-27-5144 for Boiler and Refractory Repair Services to be performed in Texas. This SLED organization is seeking qualified vendors to provide specialized repair services, with the official solicitation posted on October 30, 2026. The deadline for responses is November 18, 2026, by 8:00 PM UTC, though the procurement guidelines specify that submissions must be received by 2:00 PM CST on the closing date to be considered. Interested bidders must register and submit their proposals electronically through the AggieBid portal at aggiebidprod.tamu.edu, as no further documentation will be posted to the Electronic State Business Daily. All proposal information should be factual, clear, and concise. For further inquiries, the primary point of contact is Jim Nelms.

POSTED

DEADLINE

Boiler Combustion Analysis and Control TuningThis subcontract for Boiler Combustion Analysis and Control Tuning involves providing specialized calibration and tuning services for boiler combustion systems on Texas A&M University projects. The selected contractor will work under prime contractors to adjust air-to-fuel ratios, calibrate control sensors, and ensure strict adherence to EPA emissions standards using flue gas meters and combustion analyzers. The final deliverables for this engagement include a comprehensive combustion analysis report and a fully tuned control system. To qualify for this role, contractors must hold manufacturer-specific control system certifications. The opportunity was posted on October 30, 2026, with a response deadline of November 18, 2026. This project falls under NAICS code 811310 and is managed through the Texas A&M University procurement system.

POSTED

DEADLINE

Boiler & Refractory Repairs Services

Solicitation # TAMU-RFP-27-5144

Texas A&M University is soliciting proposals under RFP TAMU-RFP-27-5144 to establish a Master Order for Boiler and Refractory Services to be performed at its campus in College Station, Texas. The solicitation period opens on October 30, 2026, and closes on November 18, 2026, at 2:00 PM CST. All responses must be submitted electronically through the AggieBid portal, and vendors are required to adhere to the terms and conditions specified within that system and the university's official purchasing guidelines. While the primary solicitation establishes the intent to secure these services, detailed technical specifications, deliverables, and performance outputs are contained within attachments available exclusively through the AggieBid portal. Interested parties may direct inquiries to the buyer at [email hidden] or contact Jim Nelms. No specific contract value, period of performance, or evaluation criteria were provided in the initial solicitation documents.

POSTED

DEADLINE

Chiller Maintenance Services

Solicitation # 26FS0006

Solicitation 26FS0006 is an Invitation for Bid issued by the California Department of Veterans Affairs (CalVet) for comprehensive maintenance and emergency repair services for chillers, Liebert units, and cooling towers at the Veterans Home of California-Fresno. The contract period is scheduled from January 1, 2027, through June 30, 2030. The scope of work includes annual and quarterly preventive maintenance, one-time evaporator tube cleaning and eddy current testing, and emergency repair services with a required two-hour response time. Key deliverables include annual leak detection reports per AQMD requirements and yearly oil sample lab analysis reports. The contract will be awarded to the lowest responsible bidder who complies with all requirements. Evaluation factors include price, responsibility, and responsiveness, with specific incentives and preferences applied for Disabled Veteran Business Enterprises (DVBE) and certified Small or Micro businesses. To be eligible, contractors must maintain an active C-20 license and technicians must hold EPA Section 608 Universal Technician Certification. Bidders are required to submit a mandatory Rate Sheet, signed Contractor Certification Clauses, and a Bidder Certification via email to Eric Dahmen by the November 4, 2026, deadline. Awarded contractors must adhere to prevailing wage laws under Labor Code Section 1770 and comply with all site security and health requirements at the Fresno facility.

California Department of Veterans Affairs

POSTED

DEADLINE

School Bus Maintenance and RepairThis subcontract for School Bus Maintenance and Repair supports the City of Westfield Public Schools by providing essential mechanical services for transportation projects. The scope of work includes performing preventative maintenance, state-mandated safety inspections, and emergency roadside repairs to ensure the vehicle fleet remains safe and operable according to DOT standards. All work must be conducted using heavy-duty vehicle lifts and diagnostic tools by ASE certified technicians. The project is located in Westfield, Massachusetts, with a response deadline of November 20, 2026. Falling under NAICS code 811310, this opportunity requires a qualified provider to maintain high safety and operational standards for the city's student transportation infrastructure.

City of Westfield

POSTED

about 20 hours ago

DEADLINE

in 20 days

General Info

Agency

Department Of Veterans Affairs → 255-NETWORK Contract Office 15 (36C255)

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

Set-Aside

NONE

Documents

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update

PhaseClosed

PostedAug 13

Presolicitation

Type ChangedAug 13

Presolicitation → Solicitation

Notice updatedAug 20

Notice details unchanged. Attachments may have changed.

Response DeadlineAug 26

Deadline has passed

Submission Closed

08/26/2020, 03:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Veterans Affairs → 255-NETWORK Contract Office 15 (36C255)

Contacts1 person available

OfficeLEAVENWORTH, KS, 66048, USA

Organization / AgencyDepartment Of Veterans Affairs → 255-NETWORK Contract Office 15 (36C255)

Office AddressLEAVENWORTH, KS, 66048, USA

Contacts

Dana L SeelerContract Specialist

contact@example.gov

Full Description

Pre-solicitation Notice The Department of Veterans Affairs, Network Contracting Office (NCO) 15 intends to release a commercial solicitation for Triennial Electrical Testing/Inspection for the Topeka, Kansas VAMC. This acquisition shall be set-aside solicitation for Service Disabled Veteran Owned Small Business under the North American Industry Classification System (NAICS) Code 811310. The size standard is $8 million. All other details will be included in the Request for Quotation (RFQ), which will be released on August 13, 2020 with a deadline of August 26, 2020 NLT 10:00 AM CST. Questions and quotes shall be submitted via email referencing the solicitation number 36C25520Q0535 Electrical Inspection in the subject line to contact@example.gov. All amendments and any other information pertaining to this solicitation will be posted on the FedBizOpps website at www.fbo.gov. Service Disabled Veteran Owned Small Business (SDVOSB) must be verified in the VIP database (https://www.vip.vetbiz.gov/). Vendor shall be registered in the System for Award Management (SAM) in order to receive a contract award. Vendors may access SAM at https://www.sam.gov. Point of Contact for this RFQ is Dana Seeler at contact@example.gov. The NCO (15) address is: VA Heartland Network 15, Network Contracting Office, 3450 S. 4th Street Trafficway Leavenworth, KS 66048

More opportunities from Department Of Veterans Affairs → 255-NETWORK Contract Office 15 (36C255)

Same awarding agency

J061--Triennial Electrical Testing Topeka KS VAMC

Contract Overview

Active Opportunities Like This One

General Info

Documents

AI Contract Breakdown

Contract not broken down yet

Timeline

Find active opportunities like this

Organization & Contact Information

Full Description

More opportunities from Department Of Veterans Affairs → 255-NETWORK Contract Office 15 (36C255)

Earlier notices in this NAICS code

Get AI-powered intelligence on the opportunities still open