Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

JBSA FSH - HVAC Replacement OEM Parts Only – BAC and Temtrol

Awarded

FA301626P0231Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract, solicitation number FA301626P0231, is an award notice issued by the Department of the Air Force for the procurement of original equipment manufacturer parts required for HVAC replacement at JBSA Fort Sam Houston in Texas. The acquisition is specifically for OEM parts needed to rebuild BAC Cooling Towers and a Temtrol Air Handling Unit, with a total value of 68,234.78 dollars. This is a parts-only procurement, and the contract explicitly excludes any installation services. Managed by the 502 Cons Cl under the Department of Defense, the procurement was conducted as a sole-source or brand-name acquisition as justified in the Determination and Findings document dated September 8, 2026. The project falls under NAICS code 333415 and was posted on September 24, 2026. Primary administrative contact for this action is Ulysses Solis, with the place of performance located in Texas.

General Info

Air Force award for $68,234.78 for HVAC OEM parts at JBSA Fort Sam Houston.

Agency

Department Of Defense → FA3016 502 Cons Cl

Contract Value

$61,943.56

NAICS

333415 - Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

Place of Performance

0, TX, 78234, USA

Set-Aside

NONE

Awardee

TEXAS AIRSYSTEMS LLC

Award Issued Date

09/24/2026, 12:00:00 AM UTC

Documents

1

JBSA FSH HVAC Replacement OEM Parts Determination & Findings

determination-and-findings

Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded

PostedSep 24

Award Notice

AwardedSep 24

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA3016 502 Cons Cl

Contacts2 people available

OfficeJBSA LACKLAND, TX, 78236-5286, USA

Organization / AgencyDepartment Of Defense → FA3016 502 Cons Cl

Office AddressJBSA LACKLAND, TX, 78236-5286, USA

Contacts

Ulysses Solis

contact@example.gov

Teresa Calavera Sullivan

contact@example.gov

Full Description

Show more

https://api.sam.gov/prod/opportunities/v1/noticedesc?noticeid=ba044887598240a8bc0fc1654451d9fb

Similar Contracts

Same NAICS industry code

ACT-1398 CRAC units, Sensors & Stands x5 - WJHTC NJ

Solicitation # act-1398-crac-units-sensors-stands-x5-wjhtc-nj

PTSI Managed Services Inc. (Parsons) is soliciting bids for the purchase of five Leibert Computer Room Air Conditioning (CRAC) units, including associated sensors and stands. This procurement is designated for performance in New Jersey under NAICS code 333415. The opportunity is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by October 21, 2026. Sarah Vaughan serves as the primary point of contact for this solicitation.

PTSI MANAGED SERVICES INC. (PARSONS)

POSTED

about 2 hours ago

DEADLINE

in about 16 hours

COOLING COIL, AIR, DUCT

Solicitation # SPE7M0-27-T-0174

Solicitation SPE7M0-27-T-0174 is a Request for Quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of one duct type air cooling coil, identified by NSN 4130011916138 and part number 19-80-3397M from Edge Electronics Corporation. The required delivery date is October 1, 2026, with a delivery timeline of five days after order. The item is to be shipped FOB Origin to the Puget Sound Naval Shipyard IMF in Bremerton, Washington, with both inspection and acceptance occurring at the destination. The contractor must adhere to strict technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Specific material restrictions prohibit the intentional addition of mercury or mercury-containing compounds, and the contractor must comply with the Berry Amendment and the Buy American Act. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and submission of quotes through the DIBBS portal. The solicitation also incorporates various FAR and DFARS clauses regarding equal opportunity, hazardous material identification, and the safeguarding of covered defense information.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 15 hours ago

DEADLINE

HEATER, DUCT TYPE, ST

Solicitation # SPE8E8-26-T-5797

Solicitation SPE8E8-26-T-5797 is a fixed-price request for quotation issued by the Defense Logistics Agency Troop Support Construction and Equipment for one stationary duct-type heater. The required item is identified by NSN 4520-01-371-8081 and part number 106-302307-021 from Chromalox Inc. Delivery is required within 20 days after order to the USNS WATERS T AGS 45, with both inspection and acceptance occurring at the destination. The contractor must adhere to strict packaging and marking standards, specifically MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Special environmental and safety restrictions prohibit the intentional addition of mercury or mercury-containing compounds to the hardware. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system. The solicitation also mandates compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 regarding the safeguarding of covered defense information.

Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

COOLING COIL, AIR, DUCT

Solicitation # SPE7M0-27-T-0178

Solicitation SPE7M0-27-T-0178 is issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys for the procurement of one duct type air cooling coil, identified by NSN 4130011916131 and part number 19-80-2979M. The requirement is classified under NAICS code 333415 and is set aside for small businesses, with a specific price evaluation preference for HUBZone concerns. The original required delivery date is October 1, 2026, with a delivery window of five days after receipt of order. Delivery is FOB Origin, and both inspection and acceptance will occur at the destination, specifically the Puget Sound Naval Shipyard IMF in Bremerton, Washington. The contract mandates strict adherence to technical and quality requirements via the DLA Master List and specifies packaging and marking standards according to MIL-STD-2073-1E and MIL-STD-129. Special restrictions are in place regarding the use of mercury and the removal of government identification from non-accepted supplies. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and submission of all quotes via the DLA Internet Bid Board System by October 19, 2026. Key regulatory clauses apply, including the Buy American and Balance of Payments Program, NIST SP 800-171 assessment requirements, and safeguarding of covered defense information.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 15 hours ago

DEADLINE

FILTER ELEMENT, AIR CON

Solicitation # SPE8E8-26-T-5549

Solicitation SPE8E8-26-T-5549 is a request for quotations issued by the Defense Logistics Agency Troop Support for the procurement of one air conditioning filter element, identified by NSN 4130-01-696-2270. The requirement is categorized under NAICS code 333415 and specifies a delivery lead time of five days, with an original required delivery date of September 4, 2026. Delivery is set as FOB Destination, with shipping addresses provided for both a parcel post location in the United States and a freight destination in Japan. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, while noting that the DLA Master List of Technical and Quality Requirements takes precedence over ASTM standards. Palletization must follow RP001 requirements. Administratively, the contractor must use Wide Area WorkFlow for electronic invoicing and receiving reports. Key regulatory compliance includes the Buy American and Balance of Payments Program, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Offerors must provide their CAGE code and Unique Entity Identifier and represent their small business status and compliance regarding covered defense telecommunications equipment.

Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

COOLING COIL, AIR, DUCT

Solicitation # SPE7M0-27-T-0185

Solicitation SPE7M0-27-T-0185 is a request for quotation issued by the Defense Logistics Agency Weapons Support Maritime Supply Chain for the procurement of one duct type air cooling coil, identified by NSN 4130-01-257-9076. The requirement references part number 19-80-2612M1 from Edge Electronics Corporation and Electric Boat Corporation. Delivery is required within five days after order to the Puget Sound Naval Shipyard in Bremerton, Washington, with shipping terms set as FOB Origin. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, specifically requiring the avoidance of plastics for wrapping and dunnage where possible. Technical and quality requirements are governed by the DLA Master List, though it is noted that no approved Technical Data Package is currently available for this NSN. Material restrictions prohibit the intentional addition of mercury and the use of additive manufacturing processes unless specifically authorized. Compliance with the Buy American Act, Berry Amendment, and various cybersecurity standards, including NIST SP 800-171 and DFARS 252.204-7012, is required. Payment processing must be conducted electronically via Wide Area Workflow.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 15 hours ago

DEADLINE

FILTER ELEMENT, AIR

Solicitation # SPE8E8-26-T-4107

Solicitation SPE8E8-26-T-4107 is a fixed-price request for a single air filter element, identified by NSN 4130-01-696-2270, for the Defense Logistics Agency. The item is to be delivered FOB Destination to the USS George H W Bush CVN 77 in Norfolk, Virginia, with an original required delivery date of June 9, 2026, and a delivery window of five days after receipt of order. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, specifically incorporating RP001 for packaging and palletization, RQ011 for the removal of government identification from non-accepted supplies, and RC001 for source approval documentation. Packaging must comply with ASTM D3951 and MIL-STD-129, with DLA requirements taking precedence. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The agreement incorporates various FAR and DFARS clauses covering cybersecurity, safeguarding of defense information, and domestic sourcing restrictions, including the Buy American Act and Berry Amendment.

Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

COOLING COIL, AIR, DUCT

Solicitation # SPE7M0-27-T-0177

Solicitation SPE7M0-27-T-0177 is a fixed-price request for quotation issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys for the procurement of one duct type air cooling coil, identified by NSN 4130-01-191-6128 and part number 19-80-3013M. The requirement specifies a delivery timeline of five days after order, with an original required delivery date of October 1, 2026. Delivery is FOB Origin, with the final destination for inspection and acceptance being the Puget Sound Naval Shipyard IMF in Bremerton, Washington. All quotes must be submitted electronically via the DLA Internet Bid Board System (DIBBS) by October 19, 2026. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, including a prohibition on the intentional addition of mercury or mercury-containing compounds. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirement RP001. Administrative compliance includes the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment requests. Additionally, the award is subject to various federal regulations, including the Buy American and Balance of Payments Program, the Berry Amendment, and DFARS 252.204-7012 regarding the safeguarding of covered defense information.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 15 hours ago

DEADLINE

COOLING COIL, AIR, DUCT

Solicitation # SPE7M0-27-T-0176

Solicitation SPE7M0-27-T-0176 is a fixed-price procurement issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys for one duct type air cooling coil, identified by NSN 4130-01-191-6145 and part number 19-80-2983M. The required delivery date is October 1, 2026, with a delivery timeframe of five days after order. The item is to be shipped via the fastest traceable means to the Puget Sound Naval Shipyard IMF in Bremerton, Washington, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, alongside DLA packaging requirements RP001. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, and the contractor must ensure no mercury is intentionally added to the hardware. Compliance with the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity standards is required. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 15 hours ago

DEADLINE

ICEMAKER-DISPENSER

Solicitation # SPE3SE-27-Q-5006

Solicitation SPE3SE-27-Q-5006 is a Simplified Indefinite-Delivery Contract for the procurement of one countertop icemaker-dispenser, part number IMD-600-30AS, for Navy shipboard use. The unit must be NSU approved by NAVSEA/NSWCCD and meet specific technical requirements, including dimensions of 18-5/8 inches wide by 35-3/4 inches high by 27-1/2 inches deep, 6-inch stainless steel legs, and a keylock dispense switch. It must utilize R404A or R134A refrigerants, as R290A is prohibited for naval vessel food service applications. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions defined by NAVSEA. The contract is a firm-fixed-price agreement with delivery required within 30 days after receipt of order. Shipping, inspection, and acceptance are all set to destination. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirement RP001, with unique item identification following MIL-STD-130. Payment and receiving reports must be processed through the Wide Area WorkFlow system. The award will be granted to the responsible offeror deemed most advantageous to the government, considering price and other factors, including compliance with the Buy American and Balance of Payments Program.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

COOLING COIL, AIR, DUCT

Solicitation # SPE7M0-27-T-0179

Solicitation SPE7M0-27-T-0179 is a federal procurement issued by the Defense Logistics Agency for one duct type air cooling coil, identified by NSN 4130011916125 and part number 19-80-2978M. The requirement is for a single unit to be delivered FOB Origin to the Puget Sound Naval Shipyard in Bremerton, Washington, with an original required delivery date of October 1, 2026, and a delivery window of 5 days after receipt of order. The award process is automated and requires quotes to be submitted via the DIBBS portal. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List and specifies packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129. Palletization must comply with RP001 requirements. Environmental restrictions prohibit the intentional addition of mercury or mercury-containing compounds, and any hazardous materials must be labeled according to the Hazard Communication Standard. Inspection and acceptance will occur at the destination. Administrative requirements include electronic invoicing through the Wide Area Workflow system and compliance with various FAR and DFARS clauses, including the Buy American Act, the Berry Amendment, and cybersecurity standards for safeguarding covered defense information.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 15 hours ago

DEADLINE

41--COOLER UNIT,AIR

Solicitation # N0010423QJA97

Solicitation N00104-23-Q-JA97 is a firm-fixed-price request for quotation issued by NAVSUP Weapon Systems Support MECH for the manufacture and delivery of one Air Cooler Unit, identified by NSN 4130-99-555-2016 and Part 50250-04 under Cage Code 4DSJ9. The procurement requires strict adherence to quality and technical standards, including physical identification per MIL-STD-130 and preservation and packaging according to MIL-STD-2073. Government source inspection is mandatory, and all freight is handled as FOB Origin. Delivery is expected within 180 days, with primary shipping directed to the DLA Distribution New Cumberland facility in Pennsylvania. The award will be made to a single responsible offeror based on the most advantageous combination of price and past performance, with past performance weighted as more important than price. Offerors must be authorized distributors of the original equipment manufacturer and provide official verification of this status. Compliance with various federal regulations is required, including Buy American and Trade Agreements, NIST SP800-171 cybersecurity standards, and hazardous material identification per FAR 52.223-3. Invoicing and payment must be processed electronically through the Wide Area Workflow system. The final deadline for the submission of quotes is October 23, 2026, with Sophie Benson serving as the cognizant Contract Specialist.

Navsup Weapon Systems Support Mech

POSTED

about 20 hours ago

DEADLINE

More opportunities from Department Of Defense → FA3016 502 Cons Cl

Same awarding agency

DCF3 PROJECTION SYSTEM

Solicitation # A070977

POSTED

about 20 hours ago

DEADLINE

Troubleshoot & Repair of Portable Chillers Service Requirement

Solicitation # FA301626R0035

Solicitation FA301626R0035 is a request for proposal for a Firm-Fixed-Price contract to troubleshoot, repair, and restore eight portable chiller units to manufacturer specifications. The work is located across JBSA-Lackland, JBSA-Fort Sam Houston, Camp Bullis, and the Port of San Antonio in Texas. The scope of work includes comprehensive system diagnostics, leak detection, refrigerant recovery, and the replacement of components such as compressors, condenser fans, motors, evaporators, and expansion valves. This acquisition is a total set-aside for Women-Owned Small Businesses under NAICS 238220. The contract is structured with three Contract Line Item Numbers: CLIN 0001 for diagnostic services (40 hours), CLIN 0002 for repair work (650 hours), and CLIN 0003 as a not-to-exceed lot for parts and materials capped at 350,000 dollars. The total period of performance is 120 days, with an estimated window from November 1, 2026, to March 1, 2027. Award will be made on a Lowest-Price Technically-Acceptable basis to a responsible offeror who provides a detailed restoration plan and proof of valid EPA Section certifications for assigned technicians. Proposals are due by October 22, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Aviation Support Lift Equipment Component SupplierThis subcontract opportunity, managed by the Department of Defense under the 502 Cons Cl agency, seeks a supplier for new or refurbished replacement parts and hardware for US Air Force aviation support lift equipment projects. The selected provider will be responsible for delivering certified aviation support hardware to either the prime contractor or designated government sites, specifically focusing on components for load-controlling paths. All supplied hardware must strictly adhere to Original Equipment Manufacturer specifications and Air Force Technical Orders, and must be accompanied by full manufacturer warranty documentation. This procurement falls under NAICS code 423810, with a response deadline set for October 20, 2026.

Construction and Mining (except Oil Well) Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

in about 7 hours

Aviation Support Equipment Mechanical Repair ServicesThis subcontract for Aviation Support Equipment Mechanical Repair Services involves providing scheduled and unscheduled mechanical repairs for prime contractors supporting US Air Force aviation support lift equipment projects. The scope of work includes conducting surveys, replacing load-critical components in load-controlling paths, and performing post-repair load testing to ensure compliance with OSHA 1910/1926 and ANSI B30.16 standards. Contractors are expected to utilize specialized mechanical repair tools and hazardous fluid drainage equipment to deliver re-certified equipment and detailed repair reports. Managed by the Department of Defense under the 502 Cons Cl agency, the project falls under NAICS code 811210. The performance of these services is centered in the 78236 zip code area. Interested parties should note the tight response window, with the opportunity posted on October 15, 2026, and a response deadline of October 20, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

in about 7 hours

Aviation Support Lift Equipment PM and Load Testing ServicesThis subcontract for Aviation Support Lift Equipment PM and Load Testing Services involves providing annual preventive maintenance inspections, load tests, and safety certifications for prime contractors supporting US Air Force aviation projects. The scope of work requires the verification of load-controlling paths in accordance with ANSI B30.16, B30-5, and DAFI 91-203 standards, utilizing specialized equipment capable of certifying aviation-grade systems. All services must culminate in the delivery of detailed written inspection, load test, and certification reports. Managed by the Department of Defense under agency FA3016 502 Cons Cl, the project falls under NAICS code 488119. The performance of these services is centered in zip code 78236. Interested parties should note the tight response window, with the opportunity posted on October 15, 2026, and a response deadline of October 20, 2026.

Other Airport Operations

POSTED

DEADLINE

in about 7 hours

Aviation Support Equipment Load Testing

Solicitation # F2MT2M6146AQ01

This Sources Sought Notice, solicitation number F2MT2M6146AQ01, is a market research effort to identify qualified sources capable of providing aviation support equipment load testing and maintenance for the 433rd MXS/AMXS at Joint Base San Antonio-Lackland, Texas. The scope of work involves non-personal services including annual preventive maintenance inspections, load tests, certification, and both scheduled and unscheduled repairs to ensure the safe operation of aircraft support equipment. All services must adhere to OSHA Standards 1910 and 1926, ANSI Standards B30.16 and B30-5, and applicable Air Force Instructions and Technical Orders. Key deliverables include an initial annual preventive maintenance schedule, certification reports due within two workdays of completion, and repair estimates provided within 48 hours of an initial survey. Performance requirements specify that standard preventive maintenance must be completed and equipment returned within 48 hours of pickup, while approved repairs must be returned within three business days. Interested vendors must submit their response, including company details, CAGE code, and a statement of capability with product literature, to Dalwyn Corporan-Polanco by 10:00 AM CDT on October 20, 2026. This notice is for research purposes only and does not constitute a solicitation or a promise to issue one.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

in about 7 hours

Building Automation System (BAS) IntegrationThis subcontract for Building Automation System (BAS) Integration involves performing electrical control connections and system integration for prime contractors on Air Force facility projects located at JBSA Fort Sam Houston. The scope of work includes connecting control wiring, updating sensors and thermostats, and integrating units into the central BAS using BACnet IP/MSTP. The contractor is responsible for conducting commissioning and testing to ensure all systems meet manufacturing specifications, ultimately delivering a fully integrated and commissioned BAS-controlled HVAC system. Managed under the Department of Defense through the 502 Cons Cl agency, the project falls under NAICS code 238210. The solicitation was posted on October 14, 2026, with a response deadline of October 26, 2026. Performance of the contract will take place in the 78234 zip code area.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

HVAC Mechanical Installation ServicesThis subcontract for HVAC Mechanical Installation Services involves the removal and installation of DOAS WSHP units at Air Force facilities located at JBSA Fort Sam Houston. The scope of work requires the removal of 48 ceiling-suspended units and the installation of new units utilizing specialized rigging equipment. The contractor is responsible for installing condensate drain lines, P-traps, isolation valves, and strainers, as well as connecting supply and return condenser and hot water lines and routing ductwork according to manufacturer specifications to deliver fully operational HVAC units. The project is managed under the Department of Defense through the FA3016 502 Cons Cl agency and falls under NAICS code 238220. The solicitation was posted on October 14, 2026, with a response deadline of October 26, 2026. Performance of the contract will take place in the 78234 zip code area.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

DOAS Water-Source Heat Pump SupplierThis subcontract involves the manufacture and delivery of 48 horizontal package water-source heat pumps for Air Force facility projects at JBSA Fort Sam Houston. The required DOAS units must fit 3'-11.5" x 2' openings, feature a 1-25 ton capacity, right-hand return air, and include integral 3.75 kW pre-heat coils. Technical specifications mandate the use of Low-GWP refrigerants, specifically R-454B or R-32, and heat exchangers certified under AHR/ISO 13256-1. Managed under the Department of Defense, the project falls under NAICS code 333413. The supplier is responsible for ensuring all 48 HVAC units are fully compliant with the stated technical requirements and delivered to the designated site in zip code 78234.

Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

DEADLINE

Brand Name or Equal - WaterFurnace Model: UBH015R for B3631 & B3635 - Turnkey Replacement

Solicitation # A070764SS

The 502d Contracting Squadron is conducting market research via a Sources Sought Synopsis to identify capable industry sources for the turnkey removal and replacement of 48 ceiling-suspended Dedicated Outside Air System Water-Source Heat Pumps at the JBSA Ft Sam Houston San Antonio Military Medical Center Dormitory Annex, specifically in buildings B3631 and B3635. The project is projected as a Firm-Fixed Priced Purchase Order under NAICS code 238220. The contractor must provide all personnel, equipment, and supervision to install units that meet strict technical specifications, including a 1.25-ton capacity, horizontal ceiling-plenum configuration, and the use of low-GWP refrigerants such as R-454B or R-32, as R-410A is strictly prohibited. A critical requirement is that replacement units must fit through existing access openings measuring approximately 3 feet 11.5 inches by 2 feet to avoid structural demolition. The scope of work includes the integration of the units into the central Building Automation System via BACnet IP/MSTP and the use of AHR/ISO 13256-1 certified water-to-refrigerant coaxial heat exchangers. Performance must be completed within 275 days of award. Interested respondents must provide company identification, SAM.gov certifications, and confirmation that technicians hold EPA Section 608 Universal Certifications. Small business prime contractors must also verify they can cover at least 51 percent of the contract cost with their own personnel. Responses are due by October 26, 2026, and must be submitted in PDF format with a maximum length of ten pages, excluding equipment cut sheets.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Supply of Green-Certified Carpet Cleaning AgentsThis subcontract involves the supply of environmentally friendly cleaning and stain-removal chemicals for prime contractors working on Department of Defense projects at JBSA Lackland AFB. The scope of work focuses on providing carpet shampoos and spot-treatment chemicals that adhere to strict environmental standards, specifically requiring certifications from Green Seal GS-37, UL EcoLogo, or EPA Safer Choice. The selected provider is responsible for delivering approved cleaning solutions and must furnish all corresponding Technical Data Sheets and Safety Data Sheets for the products supplied. This requirement falls under NAICS code 325611 and is managed by the Department of Defense agency FA3016 502 Cons Cl.

Soap and Other Detergent Manufacturing

POSTED

DEADLINE

Commercial Carpet Cleaning and Extraction ServicesThis subcontract for Commercial Carpet Cleaning and Extraction Services involves providing comprehensive floor care for prime contractors on Department of Defense projects located at JBSA Lackland AFB. The scope of work includes vacuuming with HEPA-filtered equipment, spot treatment, and deep cleaning utilizing hot water extraction. To ensure high-quality results, the contractor is responsible for moving furniture for full coverage and deploying fans and dehumidifiers to facilitate proper drying. All services must be performed using environmentally friendly cleaning agents certified by Green Seal GS-37, UL EcoLogo, or EPA Safer Choice. The primary objective is to deliver carpets that are fully cleaned, dried, and treated for stains. This opportunity falls under NAICS code 561740 and is associated with the 502 Cons Cl agency within the Department of Defense.

Carpet and Upholstery Cleaning Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS