Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

KC 46 EFB Mounts

Active
FA442726Q906Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks proprietary EFB mounting solutions for the KC-46 fleet at Travis AFB to address the absence of semi-permanent mounting systems that securely hold Electronic Flight Bags during flight operations. The mounts must be compatible with the PIVOT Click! connection system, allowing tool-less installation and removal by crewmembers from the lower left and right window frames without damaging the aircraft structure or creating hazardous protrusions. The design must conform to FAA 14 CFR Part 23.853 flammability standards and support EFB hardware no smaller than an iPad Pro 11-inch, ensuring operational readiness while enhancing aircrew situational awareness. This centralized solution eliminates the need for individual crewmember-mounted devices, projected to save approximately $148,000 across four KC-46 squadrons over five years by standardizing equipment across the fleet. The solicitation, titled KC-46 EFB Mounts and identified by number FA442726Q906, is a total small business set-aside under NAICS code 336413 and was posted on July 15, 2026, with proposals due by July 27, 2026. The award will be administered by the Department of Defense through the office located at Travis AFB, California, and performance will occur in Linda, California. Primary point of contact is TSgt Hunter Losen, with secondary support from TSgt Rachel Gil, both reachable via phone and email provided in the announcement. The solution must be fully compliant with military and aviation safety requirements and delivered to meet immediate operational needs while ensuring long-term durability, ease of use, and crew safety during all phases of flight operations.

General Info

Proprietary EFB mounts for KC-46 fleet, compatible with PIVOT Click!, FAA-compliant, tool-less installation, standardizing equipment across four squadrons.

Agency

Department Of Defense → FA4427 60 Cons LgcView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

LINDA, CA, USA

Set-Aside

SBA

Documents

(2)

60+OG+EFB+Mount+KC-46+Pre-Solicitation+Notice.pdf

PDF

60+OG+EFB+Mount+KC46+Statement+of+Work_Redacted.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA4427 60 Cons Lgc
Contacts2 people available
OfficeTRAVIS AFB, CA, 94535-2632, USA
Organization / Agency
Department Of Defense → FA4427 60 Cons Lgc
View Agency Profile
Office AddressTRAVIS AFB, CA, 94535-2632, USA

Full Description

Show more

Description: The vast majority of the KC-46 fleet at Travis AFB lacks semi-permanent Electronic Flight Bag (EFB) mounting solutions. These mounts allow the secure placement and ready reference of EFBs during flight, enhancing aircrew awareness and responsiveness. Additionally, semi-permanent mounts allow the aircraft to be outfitted rather than each individual crewmember, saving four KC-46 squadrons approximately $148K in costs to issue individual solutions over the next 5 years. AMC/AFRC EFB case purchases use the PIVOT system of mounting for ease/stability. The mounting system must be fully compatible with the PIVOT “Click!” connection system. It must also allow secure, tool-less crew installation to the right and left lower window frames of the KC-46 aircraft and like crew removal without damage to the window or frame. When installed the bracket must fit contoured to the window frame and not allow a raised or sharp surface that could injure a crewmember. The solution must comply with FAA 14 CFR Part 23.853 flammability requirements and support EFB hardware at the minimum weight/size of an iPad Pro 11-inch.

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
Government First Article Test (FAI) Coordination & DocumentationThe contract obligates the contractor to provide full support for the Government First Article Inspection (FAI) of NSN/Part 0001S00000052, encompassing the complete preparation of all required technical documentation, inspection reports, and test data to meet military and federal standards. The contractor must coordinate directly with the Defense Logistics Agency and the Defense Contract Management Agency to facilitate the execution of FAI tests, ensure timely scheduling, and secure formal acceptance of the item under evaluation. This includes managing all aspects of documentation accuracy, compliance with specified technical requirements, and maintaining clear communication throughout the testing and approval lifecycle. The work is performed under a subcontract classified under NAICS code 336413, which pertains to aerospace product and parts manufacturing, indicating the technical complexity and high-stakes nature of the component being evaluated. The contract is administered by the Department of Defense through the Defense Logistics Agency, and the performance location is not specified beyond the federal oversight structure. The solicitation details remain unissued, and no set-aside designation applies. All activities must align strictly with DLA and DCMA procedures, with the contractor bearing responsibility for the integrity and completeness of deliverables essential to program accreditation and procurement clearance.
Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

N/A
View Details
NAICS: 336413
New
DIBBS
GASKET AND SEAL SETThe contract is for a Gasket and Seal Set with NSN 1680-01-732-8787, quantity of 455 units, at a unit price of $455.00, for a total contract value of $206,975. The item is classified as a critical application item for aviation and electronic systems, requiring compliance with stringent technical and quality standards. Delivery is scheduled for 66 days after award, with FOB origin terms and zero variance allowed on quantity. Inspection and acceptance occur at origin, with packaging mandated to meet ASTM D3951 standards, unless superseded by any DLA Master List of Technical and Quality Requirements, which take precedence. All packaging and labeling must conform to MIL-STD-129, and palletization must adhere to RP001 DLA Packaging Requirements. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are to be verified using specified AQL levels. Configuration changes require an Engineering Change Proposal or Request for Variance, and government identification must be removed from non-accepted items. The seller must comply with Cybersecurity Maturity Model Certification Level 2 requirements, and documentation for source approval must be submitted per RC001. The contract is a total small business set-aside under NAICS 336413, with a response deadline of July 22, 2026. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation is governed by DLA Procurement Notes C19 and C20.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
DIBBS
BELL CRANKThe contract specifies the procurement of a Bell Crank with NSN 1680-01-155-6036, quantity of three units, under solicitation SPE4A5-26-T-269P, with a required delivery in five days FOB origin. The item is designated as a critical application part for Boeing, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers. Cybersecurity compliance requires CMMC Level 2 self-assessment, and packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required. Item Unique Identification is waived per customer request, and physical marking of the bare item is mandatory. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances unless otherwise stated, and attributes are assigned verification levels VIIV IV and II or AQLs of 0.1, 1.0, and 4.0 respectively. The manufacturer may use attribute or variable inspection methods at their discretion. Tooling for casting or forging may be required, and suppliers are directed to submit a Casting and Forging Assistance Request if needed. Packaging and shipment are to comply with DLA packaging requirements including palletization, hazardous materials handling per IP025, and use of specified unit of issue. Delivery is to be made to the Government of Israel, Ministry of Defense, with the freight forwarder identified as G&B Packing Company. The contract includes a strict zero percent quantity variance and both inspection and acceptance occur at origin. The purchase request number is 7017343433, and the original required delivery date is June 1, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
DIBBS
SUPPORT, STRUCTURALThe contract pertains to the procurement of eight units of a structural support item identified by NSN 1560-01-549-8284 under solicitation SPE4A7-26-T-564P, with a delivery requirement within 30 days after award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the type of acquisition—simplified or large—based on either the solicitation issue date, award date, or amendment date if one is issued. Sampling and inspection must comply with MIL-STD-1916 or ASQ H1331 Table 1, or another zero-based sampling plan; critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, or with AQLs of 0.1, 1.0, and 4.0, while unspecified attributes are treated as major. Zero non-conformances are required in sample lots unless otherwise stated. Configuration changes require formal engineering change proposals or variance requests, and measuring and test equipment must meet specified standards. Inspection and acceptance occur at the manufacturer’s origin. Technical data associated with this item is subject to export controls under ITAR or EAR, and disclosure to foreign persons, including employees of foreign subsidiaries, is prohibited without prior authorization. Access is restricted to contractors with approved US/Canada Joint Certification Program status, completion of required DOD export control training, and formal approval by DLA. The place of performance is Tinker AFB, Oklahoma, with the primary point of contact being Jahaida Hall Hudson of the Department of Defense, and the contract falls under NAICS code 336413 for aerospace product and part manufacturing.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
DIBBS
PARTS KIT, CARTRIDGEThe contract is for a Parts Kit, Cartridge with part number C5746-75K and NSN 1650-00-442-8055, supplied by CAGE 70236 TACTAIR FLUID CONTROLS. This is a critical application item subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. The product must be inspected and accepted at origin using zero-based sampling per MIL-STD-1916 or ASQ H1331 Table 1, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must comply with MIL-STD-2073-1E Appendix D for kits, requiring all components to be secured in a single box with adequate cushioning to prevent movement and damage, accompanied by a detailed contents list. Marking must conform to MIL-STD-129 with no special marking codes, and palletization must follow DLA packaging requirements. Delivery is FOB origin, with no quantity variance allowed, and the full order of seven units must be delivered within 171 days to the DLA Distribution facility in New Cumberland, PA. The contract includes provisions for removal of government identification from non-accepted supplies and applies covered defense information controls. The solicitation was issued on July 17, 2026, with a response deadline of July 22, 2026, and the required delivery date is June 20, 2027.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → FA4427 60 Cons Lgc

Same awarding agency

NAICS: 713940
New
Federal
Adult Sports Official, Travis AFB, CAThe 60th Force Support Squadron at Travis AFB, California, is seeking a Small Business set-aside contract for Adult Sports Official services to support organized adult recreational sports including football, soccer, softball, basketball, and volleyball. The solicitation, identified by number FA442726Q1094, is structured as a Firm Fixed Price contract with a performance period extending from August 2026 through September 2030, inclusive of four option years and a possible six-month extension through April 2031. The base period covers 330 units of official services and 16 scorekeeper/timer services for the period of August through September 2026, with option years each requiring 2,100 official service units and 350 scorekeeper/timer units. Additionally, five sports clinics per option year are required to ensure officials are updated on specific rules and by-laws prior to each sport’s season. Work is to be performed at Linda, California, 94535, with notification of upcoming competitions provided at least 15 days in advance and detailed schedules delivered no later than one week before the first event. The contract is reserved for small businesses under a total set-aside per FAR 19.5, with NAICS code 713940, and responders must complete the Contractor Responsibility Verification form provided in Attachment 2. While key provisions and performance requirements are detailed in the Performance Work Statement and associated attachments, the solicitation does not specify unit prices, total contract value, payment terms, inspection criteria, or detailed clauses, and offerors are expected to submit proposals by the deadline of July 20, 2026, with primary point of contact being SSgt Edward Kim and secondary contact Mr. Michael Goetz.
Fitness and Recreational Sports Centers

POSTED

2 days ago

DEADLINE

in 2 days
View Details
NAICS: 236210
New
Federal
Travis AFB MACC BOAThe acquisition is for the establishment of a Multiple Award Construction Contract Basic Ordering Agreement (MACC BOA) at Travis Air Force Base, California, designed to create two contractor pools for future construction requirements. Pool 1 is designated for minor, non-complex construction projects that do not require design services, encompassing tasks such as paving, utility work, renovations, and facility upgrades like HVAC replacements, sewer reline, fencing, and carpeting. Pool 2 is intended for complex, design-build construction requiring architectural or engineering services, including major facility reconfigurations. Applications are accepted through May 15, 2030, with evaluations conducted under a Total Small Business Set-Aside (FAR 19.5) under NAICS code 236210; only small businesses registered in SAM.gov with active certifications are eligible. Contractors must demonstrate past performance, bonding capacity, and, for Pool 2, the ability to secure certified architect/engineering services via submission of an SF330 form. Evaluation is based on three equally weighted factors: past performance, bonding capability, and A/E qualifications, with compliance in SAM registration serving as a mandatory pass/fail gate. No pre-established limit exists on the number of BOAs awarded. Pricing is determined at the task order level, with bid, performance, and payment bonds required for individual orders exceeding $150,000. The government retains flexibility to provide designs for Pool 2 projects when in its best interest. Contractors must adhere to all applicable federal, state, and local codes including the National Electrical Code, National Plumbing Code, OSHA, NFPA, UFC, ADA, and California Title 24 standards. Anticipated task orders are published in synopses for fiscal years 2025 and 2026, though these do not guarantee award. All applications must be submitted using Attachment 4, and the SF1442 provided is strictly for informational purposes. Primary point of contact for submissions is Phillip Manwaring, with secondary support from Christina Johnson, both stationed at Travis AFB, California.
Industrial Building Construction

POSTED

3 days ago

DEADLINE

in almost 4 years
View Details
NAICS: 561730
Federal
Erosion Control and Stormwater ManagementThe contract pertains to erosion control and stormwater management activities including the installation of silt fences, riprap, hydroseeding, and sediment basins to mitigate runoff during and after construction. These measures are essential for complying with environmental regulations and preventing soil erosion and water contamination in the project area. The work is scoped for performance in Linda, California, with a ZIP code of 94535, and is classified under NAICS code 561730, which covers services for waste management and remediation. This is a subcontract opportunity set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside provisions, ensuring participation by qualified small firms. The solicitation was posted on July 10, 2026, with a deadline for responses set for July 20, 2026, at 11:30 PM. The contracting organization is the Department of Defense, specifically under the FA4427 60 Cons Lgc office, indicating this project supports defense-related construction or infrastructure efforts. While no specific point of contact or detailed location information beyond the ZIP code and city are provided, the work is tied to a federal procurement initiative requiring strict adherence to environmental standards, and contractors must be prepared to mobilize swiftly and meet all regulatory and operational requirements for stormwater control in a sensitive construction environment.
Landscaping Services

POSTED

8 days ago

DEADLINE

in 2 days
View Details