Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Defense was posted on September 22, 2023. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

LCAC - Depot Repaired and Retrofitted PTM Zero

Awarded
N6133123TSK01Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541330
New
SLED
2026 AC Water Main Replacement
Solicitation # 2026-RFQ-042
Solicitation 2026-RFQ-042 is a request for qualifications from the City of Mercer Island Public Works department for professional engineering services to design water system upgrades. The project focuses on replacing approximately 5,000 linear feet of aging asbestos cement water mains with ductile iron mains along SE 40th St and E Mercer Way. The scope is divided into two phases: Phase 1 involves water system and PRV vault replacement on SE 40th St from Greenbrier Ln to 97th Ave SE, and Phase 2 extends the replacement to 97th Ave SE and the 3700 and 3800 blocks of East Mercer Way. Additional components for replacement include fire hydrants and water services. The design must comply with the Reduction of Lead in Drinking Water Act and the City of Mercer Island Standard Details Water. The project follows a goal-based timeline with bid-ready plans for Phase 1 due by Q2 2027 and Phase 2 by Q3 2027, with overall construction completion targeted for Q2 2028. Qualified firms must be licensed in the State of Washington and submit a Statement of Qualifications limited to 12 pages, including a proposed timeline and three references from the last five years. Selection is at the sole discretion of the City, and the awarded firm will negotiate a scope and fee schedule using the City's standard professional services agreement. Administration is managed by the City Manager, with payments issued via City warrant within 45 days of receiving a proper monthly invoice.
Public Works

POSTED

about 14 hours ago

DEADLINE

in 14 days

AI Contract Overview

Show more

The Naval Sea Systems Command Naval Surface Warfare Center Panama City Division is awarding a firm fixed price purchase order to NexGen Composites LLC for the depot repair and retrofit upgrades of composite panels used on the LCAC PTM Zero configuration. This requirement includes components defined in drawing package 135-001-001 through 135-996-011, with all equipment to be delivered within fifteen weeks of the award. The acquisition is being conducted using simplified acquisition procedures with a total dollar value exceeding the simplified acquisition threshold of 250,000 dollars, supported by Fiscal Year 2023 Operation and Maintenance, Navy funding. This is a sole source justification under FAR 6.302-1, as NexGen Composites is identified as the only responsible source capable of satisfying the agency's requirements. The company developed the PTM through a series of Small Business Innovative Research and Defense Acquisition Challenge programs, making them the only proven manufacturer for this critical craft component. Utilizing a different source would result in estimated costs exceeding 1.2 million dollars for qualification and logistics, as well as potential schedule delays of 12 to 24 months, which would negatively impact PTM fielding requirements for LCAC and Ship to Shore Connector craft.

General Info

Contract Value

$444,595.23

NAICS

541330 - Engineering Services

Place of Performance

Summerville, SC, 29483, USA

Set-Aside

NONE

Award Issued Date

Documents

1

Sole Source Justification - LCAC PTM Zero Depot Repair and Retrofit

PDF, Low priorityjustification-and-authorization
Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded
Posted

Presolicitation

Type Changed

Presolicitation → Solicitation

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Naval Surface Warfare Center
Contacts1 person available
OfficePANAMA CITY BEACH, FL, 32407-7001, USA
Office AddressPANAMA CITY BEACH, FL, 32407-7001, USA
Contacts
Samuel K�ntz

Full Description

Show more
1. Identification of the agency and the contracting activity, and specific identification of the document as a - Sole Source Justification. This is a sole source justification. The Contracting activity is: Naval Sea Systems Command Naval Surface Warfare Center Panama City Division (NSWC PCD) 110 Vernon Avenue Panama City, FL 32407-7001 (Contracts Department Code 02) 2. Nature and/or description of the action being approved. This action will award a firm fixed price purchase order to NexGen Composites LLC. - Commercial and Government Entity (CAGE) - 6SD02 2550 W 5TH North ST, BLDG 1 Summerville, SC 29483-9665 for required depot repairs and retrofit of composite panels used on the LCAC PTM Zero configuration. 3. A description of the supplies or services required to meet the agency's needs (including the estimated value). The requirement is Depot Repair and Retrofit Upgrades to PTM Zero components inclusive of drawing package 135-001-001 through 135-996-011. This acquisition will be conducted using simplified acquisition procedures with a total estimated value greater than $25,000. The Government's minimum needs have been verified by the certifying technical and requirements personnel. This memo does not authorize acquisition for other requirements. This acquisition will be conducted using simplified acquisition procedures with a total dollar value above micro-purchase levels, and exceeding the simplified acquisition threshold of $250,000.00, All equipment will be delivered no later than fifteen (15) weeks after award of the order. The purchase will be supported with Fiscal Year (FY) 2023 Operation and Maintenance, Navy (O&MN) funding. 4. Identification of the justification rationale and, if applicable, a demonstration of the proposed contractor's unique qualifications to provide the required supply or service. 10 U.S.C. 2304(c) (1) - Only one responsible source and no other supplies or services will satisfy agency requirements, FAR 6.302-1: The PTM development effort was initiated under the Navy's Small Business Innovative Research (SBIR) Program, and the effort continued under the Defense Acquisition Challenge (DAC) Program. A subsequent effort then took the partial prototype PTM delivered under the DAC effort, corrected the identified deficiencies, and augmented it into a complete, full-up, deployable PTM, and also developed a drawing package defining the PTM design. These SBIR efforts were done by NexGen Composites under contracts N65538-04-M-0124 (Phase I), N00164-05-C-6084 (Phase II), and NSWC PCD contracts N61331-10-C-0014 and N61331-13-C-0019 (Phase III). This contract is a follow-on Phase III SBIR contract for production of the PTMs for use on the LCAC and Ship to Shore Connector (SSC) craft (LCAC-100). NexGen Composites is the only proven manufacturer the USN has deemed capable to manufacture this critical craft component. The cost the USN would incur to qualify a new source and the material purchases required to build up their assembly line could exceed $1M. There would potentially be additional costs estimated at $200K for logistics and configuration management product updates as well. In addition, the schedule slips associated with extended lead times from qualifying a new source are estimated to be 12-24 months, which would be detrimental to the current PTM fielding requirements. 5. A determination by the ordering activity contracting officer that the order represents the best value consistent with FAR 13.106-1(b). The Contracting Officer has determined that the order represents the best value and results in the lowest overall cost alternative (considering price, reoccurring costs, special features, administrative costs, engineering and redesign costs, etc.) to meet the Government's needs. 6. A description of the market research conducted and the results or a statement of the reason market research was not conducted. No additional market research was conducted for the reasons stated in paragraph 4 above. This proposed contract action will be synopsized in the Government Point of Entry SAM.gov. 7. Any other facts supporting the justification. None. 8. A statement of the actions, if any, the agency may take to remove or overcome any barriers that led to the restricted consideration before any subsequent acquisition for the supplies or services is made. As stated in paragraph 4 above, NexGen Composites, LLC. CAGE - 6SD02 is the only source that can meet the requirement.

More opportunities from Department Of Defense → Naval Surface Warfare Center

Same awarding agency

NAICS: 332710
New
Federal
Small Business Set Aside for MK68 Spare and Repair Parts Fabrication IAW the attached NAVSEA Drawing, SOW, and ALL additional attachments. Request Access to drawings through SAM. Provide your Cage Code when requesting access in SAM.
Solicitation # N61331-27-Q-JC01
Solicitation N61331-27-Q-JC01 is a total Small Business Set Aside for the Naval Surface Warfare Center Panama City Division to acquire and fabricate spare and repair parts for the MK68 System. The scope of work includes the fabrication and assembly of six Bore Rod Gag Pin Lanyard Assemblies, four End Caps, and four MK 68 MOD 1 Thermal Battery Connector Assemblies in accordance with specific NAVSEA drawings. All hardware must be delivered to Panama City Beach, Florida, within 180 days of the purchase order award. Marking and packing must comply with NAVSEA D-247-H005 standards, and the contractor is required to provide a testing report as part of the contract data requirements. Award will be determined based on the best value to the government, evaluating price, delivery terms, quality, and past performance via the Supplier Performance Risk System. Prospective offerors must request access to technical drawings through SAM by providing their Cage Code and must submit quotes to the designated contract specialist by the closing date. Invoicing and receiving reports must be processed through the Wide Area Workflow system, with mandatory email notifications sent to the contracting officer and COR. This is an unclassified effort, though it requires compliance with Controlled Unclassified Information and OPSEC countermeasures to protect sensitive technical data.
Machine Shops

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 334513
New
Federal
Mitutoyo Legex 9106 Coordinate Measuring Machine
Solicitation # N6426727Q4001
The Naval Surface Warfare Center, Corona Division, is conducting market research through a sources sought notice, solicitation number N6426727Q4001, to identify capable sources for the procurement of one Mitutoyo Legex 9106 Coordinate Measuring Machine. This is a brand name procurement based on specific precision and software compatibility requirements. The system must include the Legex 9106 Takumi Main Unit, an MPP-310Q High Accuracy Probe Head, a High-Precision Scanning Probe System F with MCOSMOS software and M3 Carbon Fiber Stylus Kit, MCOSMOS-3 CNC CMM with MiCAT Planner Off-line, and three DELL Precision 5860XL Towers, one of which must include a touchscreen monitor. Interested parties under NAICS code 334513 must submit a capability statement to Contract Specialist Julia Hunt by 5:00 PM PDT on October 26, 2026. The statement should include company identification, CAGE code, UEI number, business size, estimated unit pricing, lead time, and any industry commentary on the draft purchase description. The equipment will be delivered to the Naval Surface Warfare Center in Norco, California, with a required delivery date as soon as possible after the award. This notice is for informational purposes to determine the appropriate acquisition method and does not constitute a formal solicitation or commitment to award a contract.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 332710
New
Federal
Sources Sought for Mechanical Minesweeping Cutters Fabrication
Solicitation # N6133127SNQ01
The Naval Surface Warfare Center Panama City Division is conducting market research through a Sources Sought announcement to identify capable contractors for the manufacture, testing, and delivery of Mechanical Minesweeping Cutter Assemblies and Elevating Fin Assemblies. This effort supports a Foreign Military Sale case for the Republic of Korea Navy. The anticipated contract will be a firm-fixed-price agreement with an ordering period of up to five years, with all materials required for delivery to Panama City, Florida, by October 1, 2027. The scope of work includes the fabrication of MK 12, MK 14, and MK 15 cutter assemblies, as well as elevating fin assemblies, adhering to specific US Navy drawings and NAVSEA marking and packing standards. Contractors will be responsible for conducting in-factory fit and function tests, providing the government with two weeks' notice for inspections, and submitting detailed test and material traceability reports. Interested sources under NAICS 332710 must submit a business profile and technical capabilities summary no later than October 23, 2026. Small businesses are specifically required to address compliance with FAR 52.219-14 regarding limitations on subcontracting. While the task is unclassified, performance requires access to Controlled Unclassified Information. This announcement is for planning purposes to determine the competitive nature of the requirement and potential small business set-asides; it is not a solicitation for proposals.
Machine Shops

POSTED

7 days ago

DEADLINE

in 3 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS