Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

LENS, LIGHT

Active
SPE4A5-26-T-320TFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of a single unit of a lens and light component identified by NSN 6220-01-343-4456 and part number 25-0929-1532, classified as a commercial item. The item must be delivered FOB origin within 20 days of contract award, with no tolerance for quantity variance, and is subject to inspection and acceptance at the destination. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, while packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific marking for fragility. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and inspection levels or AQLs are strictly defined for critical, major, and minor attributes. Item Unique Identification is not required per customer request, and government identification must be removed from non-accepted supplies. Packaging and palletization adhere to DLA’s prescribed standards, with delivery directed to the Taiwan Army’s Zuo-Ying Ammunition Subfacility in Kaohsiung, Taiwan. The contract was issued under DLA’s solicitation SPE4A5-26-T-320T, with a required delivery date of August 4, 2026, and is managed under DoD acquisition protocols with designated point of contact and logistics coordination.

General Info

Procure one lens and light component, FOB origin, deliver to Taiwan by August 4, 2026, per MIL-STD and DLA specs.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

336320 - Motor Vehicle Electrical and Electronic Equipment ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-320T.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
KEBARI CHESEMAN
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
LENS,LIGHT
LENS, LIGHT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RT001: MEASURING AND TEST EQUIPMENT
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
--
--
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
--
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
--
SPE4A5-26-T-320T
SECTION B
ONTIC ENGINEERING & MANUFACTURING, INC 45934 P/N 25-0929-1532
GRIMES AEROSPACE COMPANY 72914 P/N 25-0929-1532
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017702756 0001 EA 1.000
NSN/MATERIAL:6220013434456
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:D
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:01 -01 Fragile
SPE4A5-26-T-320T
SECTION B
PR: 7017702756 PRLI: 0001 CONT’D
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT
FREIGHT FORWARDER:
MULTIPLE FORWARDERS EXIST. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANS SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
BTWZ00
TAIWAN ARMY
ZUO-YING AMMUNITION SUB
NO. 127, GUSHAN 3RD RD
KAOHSIUNG CITY
TW
MARKFOR
BTWZ00
TAIWAN ARMY
ZUO-YING AMMUNITION SUB
NO. 127, GUSHAN 3RD RD
KAOHSIUNG CITY
TW
M/F: (TCN) PTWZ5V62082054
RDD:
PROJ: TP 2
SUPP ADD: BA4KMX SIG: L
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A01 DIST: F9B ADV: 2L FC: 48
Need Ship Date:00/00/0000 Original Required Delivery Date:08/04/2026
SPE4A5-26-T-320T NSN/Part Number: 6220-01-343-4456 Quantity: 1 EA Purchase Request: 7017702756QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336320
New
DIBBS
Supply of Radiator Parts Kit (NSN 1000238707)The contract requires the manufacture, quality assurance, packaging, and annual delivery of 18 units of a commercial radiator parts kit identified by NSN 1000238707 and part number 3S0146190000 to a U.S. government logistics depot. All work must adhere to strict military standards including DLA packaging guidelines, MIL-STD-129 labeling requirements, and federal hazard communication protocols to ensure safe handling and proper identification throughout the supply chain. The contract is structured as a small business set-aside under SBA regulations, exclusively available to small businesses certified under the SBA’s size standards, with the NAICS code 336320 designating it within the automotive parts manufacturing sector. Deliveries are anticipated to occur on a steady annual schedule beginning after contract award, with full compliance mandatory for acceptance and payment. The solicitation was posted on August 3, 2026, with a response deadline of August 18, 2026, and is managed by the Strategic Acquisition Program Directorate under the Department of Defense. The contract type is a subcontract, indicating it may be issued by a prime contractor or through a broader procurement framework under the DLA. Performance location details are not specified but are assumed to align with standard defense logistics operations. The contract is accessible via the DIBBS portal and is subject to all applicable federal acquisition regulations, with particular emphasis on small business participation goals and defense supply chain integrity.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336320
New
DIBBS
PANEL, INDICATING, LIGHT
Solicitation # SPE4A6-26-T-92C5
The contract pertains to the procurement of three PANEL, INDICATING, LIGHT units with NSN 6220011952560, to be delivered to W1A8 DLA DISTRIBUTION within 210 days of award. The only approved source for this item is 81590, part number 276-5328-001. The solicitation is issued as an RFQ under number SPE4A66T92C5, with no hard copies available—only electronic access via the provided SAM.gov link. Specifications, plans, or drawings are not provided, and all responsible suppliers may submit quotes if received by the deadline. Submissions must be made electronically; no other form of response is accepted. The NAICS code is 336320, and the procuring agency is DLA Aviation under the Department of Defense, based in Richmond, Virginia. The response deadline is June 22, 2026, and inquiries must be directed via email to DibbsBSM@dla.mil, with additional information accessible through the solicitation’s online portal.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336320
New
DIBBS
STARTER, ENGINE, ELEC
Solicitation # SPE7L1-26-T-907W
The contract specifies the procurement of one electrical starter engine with NSN 2920-01-470-9867 under solicitation SPE7L1-26-T-907W, requiring delivery within five days FOB origin with no quantity variance permitted. The item must arrive at the destination in serviceable condition, with inspection and acceptance performed upon arrival. Packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129 standards, including preservation method 41, use of moisture-proof barrier bags, weather-resistant fiberboard die-cut cushioning (code JC) to immobilize the product and prevent damage, and reinforced corrugated fiberboard containers verified by manufacturer certification. Special marking requirements include an upward arrow and “OPEN THIS SIDE” labeling, and mercury or mercury compounds are strictly prohibited in all packaging processes. The contract mandates shipment via traceable freight methods only, excluding parcel post, with delivery addresses specified for Lewis McChord, Washington, and Fort Bliss, Texas, depending on the line item. All packaging and labeling must adhere to DLA’s RP001 packaging requirements and incorporate the special code ZZ for unique handling instructions. The item is procured under DoD authorized units of issue, and technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the solicitation. Original delivery dates vary across the four line items, ranging from March to July 2026, with the contract issued by the Department of Defense’s Land Supply Chain.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336320
New
DIBBS
ARM, WINDSHIELD WIPER
Solicitation # SPE7L0-26-T-0392
The contract pertains to the procurement of windshield wiper arms identified by NSN 2540013773125 under solicitation SPE7L0-26-T-0392, issued by the Department of Defense’s Land Supply Chain ESOC Buys. A total quantity of 852 units is required, divided into two line items: 48 units and 804 units, each with a unit price of $1.00 and $1.00 respectively, totaling $852. Delivery is required within 81 days of contract award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, and all items must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, including specific palletization per DLA packaging guidelines. Technical compliance is governed by referenced drawings and Technical Data Packages Rev B Gen 2, with configuration change management and variance requests subject to strict engineering control procedures. The product is classified as a critical application item, and manufacturers and non-manufacturers must adhere to tailored higher-level quality requirements. Certificate of Conformance is authorized unless otherwise prohibited. Delivery destinations are split between New Cumberland, Pennsylvania and Tracy, California, with specified shipping and parcel post addresses provided. The original required delivery date is January 31, 2027, with need ship dates set for July 23, 2026 and June 21, 2027. All technical and quality standards referenced are drawn from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. Full and open competition applies, and all documentation must align with DoD unit of issue standards.
LAND SUPPLY CHAIN ESOC BUYS

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336320
New
DIBBS
LIGHT ASSEMBLY, INDI
Solicitation # SPE4A6-26-T-11JK
The contract pertains to the procurement of a Light Assembly Indicator with NSN 6220-01-442-9625, quantity of ten units, under solicitation SPE4A6-26-T-11JK, with a required delivery within five days of award. All items must comply with DLA packaging requirements as outlined in RP001 and be marked per MIL-STD-129, with no special marking required. Packaging must conform to MIL-STD-2073-1E, with specific preservation methods, wrapping, and unit container standards defined. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 zero-based plans, with verification levels assigned as VII, IV, and II for critical, major, and minor attributes respectively, or corresponding AQLs. Zero non-conformances are mandated unless otherwise specified. The product is classified as a Critical Application Item for Aerosonic LLC, and delivery is FOB origin with no quantity variance allowed. The item is to be shipped to the Government of Israel, Ministry of Defense, with G&B Packing Company designated as the freight forwarder. The contract incorporates technical and quality requirements referenced via R and I numbers from the DLA Master List, which governs compliance based on the solicitation or award date depending on acquisition scale. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment. Documentation for Source Approval Requests must be submitted, and government identification must be removed from non-accepted supplies. Physical identification of bare items is required. All deliveries are subject to origin inspection and acceptance, with hazardous materials packaging conforming to IP025 guidelines. The acquisition falls under NAICS code 336320, is managed by the Department of Defense’s ASC Commodities Division, and is classified as a federal solicitation with a response deadline of August 11, 2026. The original required delivery date is August 6, 2026, and the point of contact for inquiries is Berkeley Vaughan.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336320
New
DIBBS
MAGNET, PERMANENT
Solicitation # SPE7LX-26-U-9142
This contract solicitation, identified as SPE7LX-26-U-9142, is a Total Small Business Set-Aside under FAR 19.5 for the procurement of permanent magnets, designated by NSN 5340011431263 and part number 4370388, with an estimated quantity of 515 units. The contract is structured as an Indefinite Delivery Contract (IDC) under the Department of Defense’s Strategic Acquisition Program Directorate, with a maximum value of $350,000, though no firm purchase obligation exists until delivery orders are issued. Delivery is required within 90 days of order placement, FOB origin, with inspection and acceptance occurring at the destination point. Packaging must strictly conform to MIL-STD-2073-1E with specific preservation, cushioning, and container requirements, and marking must follow MIL-STD-129 including special marking code ZZ and compliance with Appendix C, Paragraph 20.15. Hazardous materials, if applicable, must be labeled in accordance with OSHA’s Hazard Communication Standard, and radioactive materials must display full identifiers per MIL-STD-129. Palletization must adhere to DLA’s RP001 standards, and all items must be bar-coded using 2D Data Matrix symbols. The solicitation incorporates a comprehensive set of FAR and DFARS clauses covering employment equity, trafficking in persons, cybersecurity safeguards, subcontracting controls, payment processing, and export compliance. All contractors must submit proposals through DIBBS or the PCF portal by the deadline of August 18, 2026, and are required to provide a current UEI and CAGE code, along with accurate size status representations affirming small business eligibility. The contract mandates electronic invoicing through WAWF, and the Government retains inspection and acceptance authority at the destination. Special requirements include adherence to the prohibition on covered defense telecommunications equipment and compliance with NIST SP 800-171 cybersecurity assessment mandates. There is no defined Statement of Work beyond the item specification, and no evaluation factors or award criteria are stated, implying selection will be based on compliance and price competitiveness within the small business set-aside framework.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336320
New
DIBBS
MOTOR, WINDSHIELD WIPER
Solicitation # SPE7L4-26-T-5773
The contract solicitation SPE7L4-26-T-5773 requires the supply of 14 electric windshield wiper motors with NSN 2540-01-162-5201 and part number WJ32COR-25-107 from CLEVELAND IGNITION CO INC, to be delivered FOB origin within 168 days of contract award, with a required ship date of January 19, 2027. The unit price is $14.00 per unit, resulting in a total contract value of $196.00, with no variance allowed in quantity. All supplies must comply with DLA packaging requirements including MIL-STD-2073-1E for preparation, MIL-STD-129 for marking, and RP001 for procurement packaging, with specific packaging codes and methods detailed. No mercury or mercury-containing compounds may be intentionally added or come into direct contact with the hardware, with limited exceptions for functional uses in batteries, fluorescent lamps, sensors, weapon systems, or chemical reagents as specified by NAVSEA, and portable mercury-containing items must include a secondary containment and be shockproof per NAVSEA 5100-003D. Delivery must be made to the DLA Distribution facility at 2083 Normandy Drive, New Cumberland PA 17070-5002, with inspection and acceptance occurring at the destination. Technical and quality requirements are governed by the DLA Master List, and the contract adheres to DoD unit of issue standards and hazardous materials shipping protocols as outlined in DLAD PROC NOTES C19 and C20.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336320
New
DIBBS
LAMP UNIT, VEHICULAR
Solicitation # SPE4A6-26-T-11JN
The contract specifies a single unit of a vehicular lamp, part number E-014-023, with NSN 6220-01-518-3360, designated for commercial vehicle systems and sourced from CVG Sprague Devices, LLC in Michigan City, Indiana. The item is a 12-volt red/yellow pilot lamp requiring strict adherence to DLA packaging and technical quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with all DLA standards overriding ASTM D3951 for commercial packaging. Packaging must comply with TQ requirement IP025 and be marked and labeled per MIL-STD-129, with palletization following RP001 guidelines; the unit is to be delivered in a single piece with zero variance in quantity. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and the item must arrive within 10 days, with an original required delivery date of July 28, 2026. The shipment must be sent via the fastest traceable method, excluding parcel post, and addressed to W8028L at 6698 East J Street, Hastings, Nebraska 68901-8435, with the RDD code 555 and project code TP 2. The contract falls under the solicitation number SPE4A6-26-T-11JN, issued by the Department of Defense’s ASC Commodities Division, and the point of contact is Shenika Thompson. Covered defense information may apply, and any hazardous material handling must follow FED-STD-313, though this item is not designated as hazardous.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336320
New
DIBBS
PANEL, INDICATING, LI
Solicitation # SPE4A7-26-T-607L
The contract specifies the procurement of five PANEL, INDICATING, LIGHT TRANSMITTING units classified as Type III Class 1-R with NSN 6220-00-119-8614, awarded under solicitation SPE4A7-26-T-607L. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to stringent documentation and compliance requirements including Source Approval Requests, Cybersecurity Maturity Model Certification Level 2 for third-party assessors, and DLA packaging standards. Configuration changes require formal Engineering Change Proposals and any deviation or waiver must be formally requested. Inspection and acceptance occur at the manufacturer’s origin, and all non-accepted supplies must have government identification removed prior to return. The product includes components governed by Qualified Products Lists or Qualified Manufacturers Lists, necessitating adherence to procurement note H02. Physical identification of the item must conform to specified marking requirements. Technical data associated with this item is subject to export control under ITAR or EAR, restricting dissemination to foreign persons and requiring compliance with DFARS 252.225-7048. Access to this controlled data is limited to DLA contractors with approved US/Canada Joint Certification Program status, completion of mandatory DOD export control training, and formal approval from DLA authorities. The delivery address is Tinker AFB, Oklahoma, with a delivery deadline 518 days after award, and the solicitation closes on August 11, 2026, with Soni Randolph as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336320
New
DIBBS
FILTER, LIGHT, UTILIT
Solicitation # SPE4A6-26-T-11JL
The contract pertains to the procurement of a light filter, identified by NSN 6220014540354 and part number 208087, with a quantity of ten units to be delivered within twenty days from the contract award date. Delivery is FOB origin, inspection and acceptance both occur at the origin, and no variance in quantity is permitted. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit container codes, while marking must follow MIL-STD-129 with no special marking required. Palletization adheres to DLA packaging requirements, and hazardous material shipping protocols are referenced where applicable. The item is classified as a critical application item and is subject to stringent quality provisions outlined in the DLA Master List of Technical and Quality Requirements, incorporated by reference through R and I numbers, with sampling mandated under MIL-STD-1916 or a comparable zero-based plan and zero non-conformances required unless otherwise stated. The procurement is issued under solicitation SPE4A6-26-T-11JL by the Department of Defense’s ASC Commodities Division for delivery to the Government of Israel, Ministry of Defense. Cybersecurity requirements include a CMMC Level 2 self-assessment, and the contractor must comply with tailored higher-level quality standards, removal of government identification from non-accepted supplies, and physical item marking specifications. The supply chain involves a freight forwarder based in Jersey City, NJ, with final delivery directed to a defense installation in Israel. The contract enforces compliance with defense-specific data handling procedures, including covered defense information, and stipulates that the version of the DLA Master List in effect on the solicitation issue date governs all referenced technical and quality requirements. The item falls under NAICS code 336320, and the point of contact for inquiries is Sterling Mason of DLA, with the original required delivery date set for August 6, 2026.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336320
New
DIBBS
Reel Assembly, Hose SupplyThe contract calls for the supply of a complete reel assembly with hose as a commercial off-the-shelf item, ensuring it meets all applicable military specifications without modification. The item must be delivered in its existing commercial form but is subject to destination inspection to verify compliance with required military standards, emphasizing functionality, durability, and performance under operational conditions. The procurement is structured as a subcontract and falls under the NAICS code 336320, which pertains to other transportation equipment manufacturing, indicating the focus is on specialized equipment used in defense logistics or vehicle systems. The solicitation was posted on August 2, 2026, with a response deadline of August 13, 2026, and is managed by the Department of Defense through its Construction & Equipment Manu & Con agency. Although specific location details for the place of performance or point of contact are not provided, the procurement is hosted on the DIBBS platform, which governs defense-related contract opportunities. The requirement for destination inspection underscores the government’s need to validate compliance prior to acceptance, and bidders must ensure the COTS product inherently satisfies all military standards without customization or retrofitted components.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 336320
New
DIBBS
Marine Seat Manufacturing and AssemblyThe contract seeks a subcontractor to fabricate and perform final assembly of a marine seat designated by NSN 2090-20-008-1750 and Part No. SWP-1055-LM, adhering strictly to military specifications with engineering approval required from the government. The work involves precision manufacturing processes to meet operational standards for naval environments, ensuring durability, safety, and compatibility with military platforms. All components and assemblies must comply with documented technical requirements and undergo verification under government oversight to confirm conformance. Performance is required at the location in Virginia Beach, Virginia, with a response deadline of August 13, 2026, and the solicitation posted on August 2, 2026. The North American Industry Classification System code 336320 identifies this as part of the transportation equipment manufacturing sector, specifically focusing on ship and boat building or related component fabrication. The ordering activity is the Fluid Handling Division under the Department of Defense, indicating the end-use is for defense-related maritime operations. Subcontractors must be prepared to meet schedule demands and quality controls typical of military procurement while operating under federal contracting obligations without set-aside designations.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 541380
New
DIBBS
Product Verification Testing (PVT) Sample ManagementThe contract titled Product Verification Testing (PVT) Sample Management governs the secure handling, labeling, and tracking of test samples used in product verification processes, with an emphasis on strict segregation to prevent any unauthorized posting to inventory stock. All activities must adhere to rigorous documentation protocols to ensure traceability and compliance, ensuring that samples are physically and administratively isolated from regular production or inventory streams at all times. This subcontract is issued under NAICS code 541380, indicating a focus on scientific and technical consulting services, and is managed by the ASC SUPPLIER OPER OEM DIVISION within the Department of Defense. The solicitation was posted on August 3, 2026, with responses required by September 3, 2026, and performance is expected to occur under the oversight of the contracting office, though specific location details are not provided. The nature of the work demands complete accountability and procedural discipline to maintain the integrity of verification outputs and prevent systemic errors in product validation.
Testing Laboratories and Services

POSTED

about 17 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 484220
New
DIBBS
Preservation, Packaging, and Military-Compliant ShippingThe contract requires the preservation of items using corrosion preventive compounds, followed by dry storage packaging in full compliance with MIL-STD-2073-1E standards. All packaging must be labeled according to MIL-STD-129 specifications to ensure proper identification and handling throughout the supply chain. The finished packages are to be shipped FOB origin to the Defense Logistics Agency facility in New Cumberland, Pennsylvania, with the contractor responsible for all preparation, packaging, and shipping duties up to the point of departure from their location. The work must be performed in strict adherence to military standards to ensure long-term protection and readiness of the equipment or components. This is a subcontract under the NAICS code 484220, which pertains to truck transportation for scenic and sightseeing purposes, though the specific nature of the transported items and their logistical handling indicate a specialized defense logistics context. The solicitation was posted on August 3, 2026, with a response deadline of September 3, 2026, and is managed by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense. There is no set-aside designation specified, and the contract does not indicate a specific point of contact or physical office location beyond the destination facility in New Cumberland, PA. All work must be completed and shipped according to the outlined military standards before the deadline.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 17 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 811211
New
DIBBS
Unique Item Identification (UID) and Data Matrix Marking ServicesThe contract requires the application of Unique Item Identification (UID) markings in compliance with MIL-STD-130 specifications, utilizing Data Matrix symbols formatted according to ISO/IEC 15434 standards to ensure accurate and permanent identification of military parts. Each item must be serialized to enable end-to-end traceability throughout the defense supply chain, with rigorous verification processes in place to confirm the readability, accuracy, and durability of the markings under operational conditions. The work is performed under a subcontract arrangement for the Department of Defense, specifically managed by the ASC SUPPLIER OPER OEM DIVISION, and must adhere strictly to federal guidelines for item identification and data structure. The solicitation was posted on August 3, 2026, with responses due by September 3, 2026, and falls under the NAICS code 811211, indicating a focus on electronic and precision equipment repair and maintenance services supporting military hardware.
Consumer Electronics Repair and Maintenance

POSTED

about 17 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332312
New
DIBBS
Manufacture of Air Conditioning Duct AssembliesThe contract requires the fabrication, assembly, testing, and certification of duct assemblies specifically designed for military air conditioning and heating systems, with strict adherence to military specifications to ensure operational reliability and environmental compatibility. All deliverables must be fully traceable through verified CAGE codes and part numbers to maintain accountability throughout the supply chain and support long-term maintenance and logistics requirements. The work is classified as a subcontract under NAICS code 332312, indicating the focus on HVAC equipment manufacturing, and is solicited by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense to support critical defense infrastructure. Bid responses must be submitted by the deadline of September 3, 2026, with no set-aside provisions specified, meaning the opportunity is open to all eligible contractors regardless of business size or certification status. The place of performance details are not provided, suggesting the work may be performed at the contractor’s facility or other approved locations, subject to approval. The contract is accessible via the DIBBS portal under solicitation number SPE4A526R0251, where full technical requirements and compliance documentation can be obtained. Successful bidders must demonstrate proven capability in military-grade HVAC component manufacturing and quality control processes to meet the rigorous standards expected by the DoD.
Fabricated Structural Metal Manufacturing

POSTED

about 17 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 484220
New
DIBBS
Logistics and Transportation to Tinker AFBThe contract requires the secure and timely transportation of finished defense components from various origin points to the DLA Distribution Depot located at Tinker Air Force Base in Oklahoma, with strict adherence to defense logistics standards. All shipments must be accompanied by real-time tracking capabilities to ensure full visibility and accountability throughout the transit process, and compliance with federal defense regulations is mandatory. The work falls under NAICS code 484220, indicating specialized freight trucking services, and is structured as a subcontract under the Department of Defense, specifically managed by the ASC SUPPLIER OPER OEM DIVISION. Bidders must respond by the deadline of September 3, 2026, with proposals evaluated based on ability to meet operational security, delivery timelines, and tracking specifications. While the exact origin locations and volume of components are not detailed, the performance location is fixed at Tinker AFB, and all carriers must demonstrate proven experience in handling defense-related cargo, adherence to chain-of-custody protocols, and the technological infrastructure to support continuous monitoring. The contract does not specify a set-aside status, meaning it is open to all qualified vendors without restrictions based on business size or ownership classification.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 17 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332996
New
DIBBS
Supply of Raw Materials or SubcomponentsThe contract seeks the supply of raw metals, alloys, or off-the-shelf mechanical subcomponents that must fully comply with military and ASTM specifications for use in final assembly processes. These materials and components are intended for defense-related applications and must meet strict quality and performance standards to ensure compatibility and reliability in critical systems. The solicitation is open for bids through a subcontracting arrangement under NAICS code 332996, with responses due by September 3, 2026, and was posted on August 3, 2026. The requirement is managed by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, and performance is expected to align with federal defense procurement protocols, though no specific location for delivery is identified. There is no set-aside designation applied to this opportunity, meaning all eligible suppliers may compete. Bidders must ensure their offerings meet all technical requirements outlined in the associated military and ASTM standards and are prepared to support integration into larger military systems. The full solicitation details can be accessed through the provided DIBBS link.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 17 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541690
New
DIBBS
Quality Assurance and Inspection ServicesThe contract requires independent inspection and testing services to guarantee zero non-conformances in defense components, adhering strictly to MIL-STD-1916 or ASQ H1331 sampling plans. The work involves rigorous quality assurance protocols to ensure every component meets exacting military standards before delivery, with no tolerance for defects or deviations. The scope is focused on supporting critical defense supply chains through precise, auditable inspection processes designed to eliminate failure risk at the source. This is a subcontract under the Department of Defense, specifically managed by the ASC SUPPLIER OPER OEM DIVISION, with a NAICS code of 541690 for other scientific and technical consulting services. The solicitation was posted on August 3, 2026, and responses must be submitted by September 3, 2026. While no specific location is provided for performance or contract administration, the work is expected to support defense components in a manner aligned with federal procurement requirements. Contractors must be prepared to demonstrate expertise in military quality standards and deliver verifiable results to maintain compliance throughout the contract period.
Other Scientific and Technical Consulting Services

POSTED

about 17 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 561910
New
DIBBS
Packaging, Marking, and Shipment ComplianceThe contract requires comprehensive packaging, marking, and shipment services fully aligned with MIL-STD-129 and DFARS Appendix F standards, ensuring all items are properly prepared, labeled, and documented for military logistics. Essential tasks include the accurate application of barcodes, generation of compliance documentation, and timely WAWF reporting to support end-to-end supply chain visibility and accountability. All activities must meet strict Department of Defense requirements for traceability, identification, and data submission, with no tolerance for deviations from established military specifications. This is a subcontract solicitation issued by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, with the NAICS code 561910 indicating it falls under other support activities for transportation. The solicitation was posted on August 3, 2026, with responses due by September 3, 2026. The place of performance and specific agency location details are unspecified, but the work is intended to support DoD supply chain operations. Bidders must demonstrate proven capability in military packaging and labeling compliance and be prepared to meet rigorous documentation and electronic reporting standards via WAWF.
Packaging and Labeling Services

POSTED

about 17 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541330
New
DIBBS
Engineering Design and Technical Data ConformanceThe contract requires technical expertise to ensure that manufactured defense components fully comply with the latest revision of technical data, encompassing detailed drawing validation, reverse engineering of existing parts, and design support services. This work is critical to maintaining operational integrity and adherence to defense specifications, where even minor deviations can compromise performance or safety. Contractors must possess the capability to interpret complex engineering documentation and apply precise methods to bring components into full conformance with current standards. The opportunity is structured as a subcontract under NAICS code 541330, indicating professional, scientific, and technical services related to engineering. It is issued by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, with a response deadline of September 3, 2026, and was posted on August 3, 2026. There is no specified set-aside classification or geographic restriction for performance location, suggesting broad eligibility for qualified subcontractors operating in support of national defense systems. All proposals must demonstrate proven experience in defense-related technical data conformance and engineering validation.
Engineering Services

POSTED

about 17 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332710
New
DIBBS
Precision Machining of Mechanical ComponentsThe contract involves the precision manufacturing of mechanical components, specifically the FEEL MECHANISM, RUDD, through CNC machining, finishing, and rigorous quality inspection processes to comply with military specifications. The work must be executed to exacting standards ensuring functionality, durability, and reliability under demanding operational conditions typical of defense applications. All manufacturing steps are subject to stringent quality control protocols to guarantee conformance to federal and military requirements. The contract is classified as a subcontract under NAICS code 332710, which corresponds to machine shop processing, and is issued by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense. The solicitation was posted on August 3, 2026, with a response deadline of September 3, 2026. While no specific place of performance or point of contact is provided, all work must adhere to the technical and regulatory criteria outlined by the contracting authority, and potential bidders are directed to the official DIBBS portal for full submission details and requirements.
Machine Shops

POSTED

about 17 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334515
New
DIBBS
Supply of Aviation Life Support Tester (NSN 6695-01-590-8393)The contract requires the procurement and delivery of 66 units of an Aviation Life Support Tester identified by NSN 6695-01-590-8393, with all units strictly adhering to military specifications and engineering drawings as mandated by government standards. The item must be manufactured and delivered in full compliance with the defined technical requirements to ensure operational compatibility and reliability within defense aviation support systems. The solicitation is structured as a subcontract under NAICS code 334515, issued by the ASC SUPPLIER OPER OEM DIVISION of the Department of Defense, with responses due by September 3, 2026. While no specific place of performance or point of contact is detailed, the contract's scope is focused solely on the supply of the specified equipment, and all deliveries are expected to meet the exacting quality and conformity standards set forth by the military. The solicitation was posted on August 3, 2026, and interested parties must submit proposals through the official DIBBS portal prior to the deadline.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

about 17 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332510
New
DIBBS
PLUG, MACHINE THREAD
Solicitation # SPE4A5-26-T-319S
The contract is for the supply of two machine thread plugs with NSN 5365-01-266-6399 under solicitation SPE4A5-26-T-319S, with a required delivery within 20 days of award. The item is procured by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION, and the contract adheres to DLA packaging and technical requirements referenced from the DLA Master List of Technical and Quality Requirements. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are to be classified with verification levels or AQLs of VII, IV, and II for critical, major, and minor characteristics respectively. The supplier must ensure no intentional addition of mercury or mercury-containing compounds to the hardware, with exceptions limited to functional uses in batteries, fluorescent lights, sensors, weapon systems, and regulated chemical reagents, and any portable devices containing mercury must be shock-proof with a secondary containment barrier per NAVSEA 5100-003D. An alternate offeror must submit a complete data package for both the approved and alternate part since no data is currently available, and the solicitation closes on August 11, 2026, with contact information provided through Andrew Kish at DLA.
Hardware Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details