Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Level I Repair of Electro-Mechanical Actuator (NIIN 011933544)

Active

Federal

Response Deadline10/30/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the Level I repair of electro-mechanical actuators (NIIN 011933544) for prime contractors supporting the Department of Defense Navsup Weapon Systems Support. The scope of work includes the complete teardown, evaluation, and restoration of units to like-new condition. All work must be performed according to TDP Version No. 004 and includes government-approved welding and brazing processes. The selected provider must maintain ISO-9001 certification and strictly adhere to SUBSAFE and Non-Level I material handling procedures. The final deliverable is one fully repaired and tested actuator accompanied by the required DD1423 documentation. This opportunity is categorized under NAICS code 811219, with a response deadline of October 30, 2026.

General Info

Level I repair of electro-mechanical actuators for DoD by ISO-9001 certified provider.

Agency

Department Of Defense → Navsup Weapon Systems Support Mech

NAICS

811219 - Other Electronic and Precision Equipment Repair and Maintenance

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of N0010426QFC13.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

ACTUATOR,ELECTRO-ME

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 16

subcontract

Response DeadlineOct 30

Submission deadline

Response Deadline

10/30/2026, 08:30:00 PM UTCin 13 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs teardown, evaluation, and full repair of electro-mechanical actuators for prime contractors on NAVSUP Weapon Systems Support projects. Restores units to like-new condition using TDP Version No. 004, including government-approved welding and brazing. Requires ISO-9001 certification and SUBSAFE/Non-Level I material handling procedures. Delivers one fully repaired and tested actuator with DD1423 documentation.

Similar Contracts

Same NAICS industry code

EEW System Operations and Maintenance (O&M)

Emergency Management

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Automated MultiForce Fuel System Technical Support

City of Houston

POSTED

about 13 hours ago

DEADLINE

Certified Evolv Maintenance Provider

Public Safety Administration

POSTED

about 15 hours ago

DEADLINE

Electronic Vehicle Security ReprogrammingThis subcontract for Electronic Vehicle Security Reprogramming supports prime contractors on City of Phoenix Public Works Department fleet projects. The scope of work involves the electronic programming and configuration of vehicle security and entry systems, specifically focusing on reprogramming OEM and aftermarket keyless entry systems and integrating new fobs into security modules. All work must be performed without the use of spliced wiring, utilizing professional OEM and aftermarket diagnostic scan tools and programming software to deliver fully synchronized electronic security systems. The opportunity is categorized under NAICS code 811219 and was posted on October 16, 2026. Interested parties must submit their responses by the deadline of November 11, 2026. This project is managed through the Arizona Public Works agency.

POSTED

about 19 hours ago

DEADLINE

Transfer Unit Electronics Repair and OverhaulThe Transfer Unit Electronics Repair and Overhaul subcontract involves the teardown, evaluation, repair, overhaul, and modification of Transfer Units for prime contractors supporting Navsup Weapon Systems Support. The scope of work specifically focuses on the disassembly, cleaning, inspection, and component-level repair and reassembly of part number 4705-01000-15-102. The final deliverables for this project include 105 Ready For Issue units along with all required approved process documentation. To qualify for this effort, the contractor must possess NAVSUP WSS source approval and maintain IPC/EIAJ-STD-001C soldering certification. This Department of Defense project falls under NAICS code 811219, with a response deadline set for November 16, 2026.

Navsup Weapon Systems Support

POSTED

about 22 hours ago

DEADLINE

in about 1 month

Electronic Component Repair and RFI RestorationThis subcontract for Electronic Component Repair and RFI Restoration supports Navsup Weapon Systems Support projects through the teardown, evaluation, repair, overhaul, and testing of Data Acquisition Units. The scope of work includes disassembling and cleaning units, performing technical inspections, executing component-level repairs, and conducting final functional testing in accordance with technical drawings and repair manuals. The project specifically requires the delivery of 23 Ready for Issue units. To successfully execute the contract, the provider must utilize specific test and tooling equipment for part number AN81721-001-01. Additionally, all personnel performing the work must hold IPC/EIAJ-STD-001C certification to ensure quality and compliance with industry standards. The opportunity is categorized under NAICS code 811219 and is managed under the Department of Defense.

Navsup Weapon Systems Support

POSTED

about 22 hours ago

DEADLINE

in about 1 month

Confocal Microscope Preventive Maintenance and RepairThis subcontract involves providing preventive maintenance and corrective repairs for Nikon AXR-NSPARC confocal microscopes supporting scientific instrument projects for the National Institutes of Health NIDCD. The scope of work includes executing scheduled maintenance, providing repair labor, and performing diagnostic testing to ensure all systems operate according to manufacturer specifications. The final deliverables consist of a fully operational system and a detailed maintenance service report. The project is located in Bethesda, Maryland, and falls under NAICS code 811219. To be eligible, personnel must possess Nikon certification or equivalent OEM-level training specifically for the AX-R series. The solicitation was posted on October 16, 2026, with a response deadline of October 26, 2026.

National Institutes Of Health Olao

POSTED

about 22 hours ago

DEADLINE

Switch Gear Valve Module Overhaul and RFI RestorationThis subcontract for Navsup Weapon Systems Support involves the overhaul, upgrade, repair, testing, and inspection of Switch Gear Valve Modules. The contractor is responsible for restoring 16 modules to Ready for Issue condition, ensuring all work adheres to technical drawings, repair manuals, and MIL-STD-130 marking standards. Specific requirements include the use of specialized tooling for part number 7RH1680-01-525-6163 V2 and mandatory approval from the design control activity. The project falls under NAICS code 811219 and is managed through the Department of Defense.

Navsup Weapon Systems Support

POSTED

about 22 hours ago

DEADLINE

in about 1 month

Elekta Infinity Linear Accelerator Gold-Level ServiceThis subcontract involves providing gold-level remedial and preventive maintenance for the Elekta Infinity Linear Accelerator system at the Overton Brooks VAMC for prime contractors. The scope of work includes performing two annual preventive maintenance inspections, servicing the Multileaf Collimator, and offering on-site technical support to maintain a system uptime of 99 percent. The selected provider must hold specific certification to service Elekta Infinity systems and is responsible for delivering all completed service reports to the Contracting Officer's Representative. This requirement is managed under the Department of Veterans Affairs, Network Contract Office 16, with a focus on ensuring high operational availability for critical medical equipment.

256-NETWORK Contract Office 16 (36C256)

POSTED

about 22 hours ago

DEADLINE

Installation and Integration of Surgical Camera HeadsThis subcontract involves the installation and integration of surgical camera heads at the Quentin N. Burdick Memorial Health Care Facility for the Great Plains Area Indian Health Service. The selected provider will work under prime contractors to install hardware into the Olympus VISERA ELITE II system, ensuring full interoperability without the need for additional interface equipment. The scope of work includes rigorous testing for electrical safety and clinical functionality to deliver fully operational and integrated surgical imaging hardware. This project is categorized under NAICS code 811219 and is performed in Belcourt, with a response deadline of October 30, 2026.

Great Plains Area Indian Health Svc

POSTED

about 22 hours ago

DEADLINE

Steering Wheel Overhaul and RepairThis subcontract involves the full technical repair and overhaul of steering wheels for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The selected provider is responsible for executing all repairs in strict accordance with established manuals, directives, and drawings, ensuring that all final testing meets original manufacturer specifications. Critical compliance requirements include performing physical identification per MIL-STD-130, REV N and encoding data matrix symbols according to ISO/IEC 15434/15418 standards. All work must successfully pass a Government Source Inspection before the delivery of the repaired, tested, and identified steering wheel. The solicitation was posted on October 16, 2026, with a response deadline of November 2, 2026, falling under NAICS code 811219.

Navsup Weapon Systems Support Mech

POSTED

about 22 hours ago

DEADLINE

DMA 850 Installation and Operator TrainingThis subcontract, managed by the NASA Shared Services Center for the National Aeronautics and Space Administration, involves the physical installation and technical training for the DMA 850 system at the Goddard Space Flight Center. The scope of work requires factory-certified technicians from TA Instruments or Waters Technologies to ensure the system is fully operational and that personnel are proficient in conducting dynamic, creep, and fatigue testing. The project is categorized under NAICS code 811219 and is intended for prime contractors supporting NASA projects. The primary deliverables include a completely installed system and the successful completion of operator training to ensure the facility can independently manage the equipment's technical requirements.

NASA Shared Services Center

POSTED

about 22 hours ago

DEADLINE

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

Metallurgical and Mechanical Testing for Special Emphasis FastenersThis subcontract for the Department of Defense, specifically Navsup Weapon Systems Support Mech, involves providing metallurgical and mechanical testing for special emphasis fasteners. The selected contractor will perform quantitative chemical and mechanical analysis, including thread verification per FED-STD-H28, production lot destructive testing, and Liquid Penetrant or Magnetic Particle inspections. The primary objective is to support prime contractors on shipboard projects through the delivery of detailed test reports and certifications for every heat or lot processed. To qualify for this engagement, contractors must maintain rigorous quality standards, including ISO/IEC 17025, ISO 10012, and ANSI/NCSL Z540.3 certifications. The opportunity falls under NAICS code 541380. Interested parties must submit their responses by the deadline of November 5, 2026.

Testing Laboratories and Services

POSTED

about 22 hours ago

DEADLINE

Manufacturing of Special Emphasis Heavy Hex NutsThis subcontract involves the manufacturing of high-criticality Heavy Hex Nuts for prime contractors supporting NAVSUP Weapon Systems Support shipboard projects. The scope of work requires the fabrication of nuts according to Leslie Controls drawings 38650N, 36938N, and 38980N, utilizing either ASTM-A194 Grade 2H or Grade 7 steel. Deliverables include the finished hardware accompanied by Certificates of Compliance. Strict quality and technical standards must be maintained, including thread inspection per FED-STD-H28 and packaging in accordance with MIL-STD-2073. The performing entity must maintain an ISO 9001 quality system and ensure compliance with ANSI/ASQ Z1.4. This opportunity is categorized under NAICS code 332722 for the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 22 hours ago

DEADLINE

MIL-STD-2073 Packaging and Marking ServicesThis subcontract involves providing specialized preservation, packaging, and marking services for prime contractors supporting Navsup Weapon Systems Support Mech shipboard projects. The scope of work requires strict adherence to MIL-STD-2073 packaging standards and the application of Item Unique Identification markings using laser etchers or equivalent equipment to ensure the durability of Special Emphasis material. The selected provider is responsible for delivering all finished products fully packaged and marked for FOB Destination shipment. This opportunity falls under NAICS code 561910 and is managed by the Department of Defense. Interested parties must submit their responses by November 2, 2026.

Packaging and Labeling Services

POSTED

about 22 hours ago

DEADLINE

Production Lot Destructive Testing for Shipboard NutsThis subcontract involves performing destructive testing on production lots of shipboard nuts for prime contractors supporting Navsup Weapon Systems Support Mech projects. The scope of work focuses on material integrity validation for Special Emphasis Level I hardware, utilizing tensile, hardness, or shear testing in strict accordance with the Technical Data Package. The selected provider must maintain ISO/IEC 17025 laboratory accreditation to ensure testing standards are met. Key deliverables include the submission of formal test reports and the final certification regarding the acceptance or rejection of each production lot. This opportunity is categorized under NAICS code 541380 and is managed by the Department of Defense.

Testing Laboratories and Services

POSTED

about 22 hours ago

DEADLINE

Manufacture of Special Emphasis Plain Round Nuts (NIIN 013397780 & 013397781)This subcontract involves the manufacture of high-precision plain round nuts, specifically NIIN 013397780 and 013397781, for prime contractors supporting Navsup Weapon Systems Support Mech shipboard projects. The contractor is required to fabricate the components according to NAVSEA Drawing 6602371 and TDP Version 003, while adhering to FED-STD-H28 for thread inspection and MIL-DTL-24252 to ensure zero weld repairs. Eligible providers must possess precision machining equipment and hold either ISO-9001 or MIL-I-45208 certification. Final deliverables must include the finished nuts accompanied by comprehensive certification data and DD Form 1423. The response deadline for this opportunity is November 2, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 22 hours ago

DEADLINE

Manufacture of Specialized Check Valves (VALVE, CHK SPCL42X46)This subcontract involves the manufacture of 10 specialized check valves, specifically model VALVE, CHK SPCL42X46 with NIIN 016665954, for prime contractors supporting Navsup Weapon Systems Support Mech. The fabrication process must strictly adhere to Cage Code IM994 and reference 2648038, utilizing precision machining equipment to ensure technical specifications are met. The contractor is responsible for full compliance with several military standards, including MIL-STD-130 REV N for marking and MIL-STD-2073 and MIL-STD-129 for packaging. Additionally, the project requires adherence to DFARS 252.204-7012 regulations. All units must be fully marked and inspected prior to delivery.

Industrial Valve Manufacturing

POSTED

about 22 hours ago

DEADLINE

Destructive Testing for Naval Electrical ComponentsThis subcontract for the Department of Defense involves performing destructive First Article Testing for prime contractors on Navsup Weapon Systems Support Mech shipboard projects. The selected provider will execute government-mandated testing to failure using electrical overload, compression, and tension equipment to ensure structural and electrical integrity in accordance with TDP O04 specifications. The contractor must hold the necessary laboratory accreditation for military-grade destructive testing and is responsible for delivering a certified Test Report for government approval. This opportunity falls under NAICS code 541380, with a response deadline set for October 30, 2026.

Testing Laboratories and Services

POSTED

about 22 hours ago

DEADLINE

Manufacture of MIL-SPEC Electrical Plug ConnectorsThis subcontract involves the manufacture of high-reliability electrical plug connectors for prime contractors supporting Navsup Weapon Systems Support Mech shipboard projects. The contractor is responsible for fabricating connectors with NIIN 010463755, adhering strictly to TDP Version O04 and MIL-DTL-24231 specifications. Production requires the use of precision machining and molding equipment, and the contractor must maintain Special Emphasis Level I capability. All finished products must comply with MIL-STD-2073 packaging standards and be delivered FOB Destination to the Portsmouth Naval Shipyard. This Department of Defense requirement falls under NAICS code 335931, with a response deadline set for October 30, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 22 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on NAVSUP Weapon Systems Support projects for the Department of Defense. The scope of work involves performing specialized military packaging and marking, specifically applying markings according to MIL-STD-129, implementing Item Unique Identification per MIL-STD-130, and packaging items in accordance with MIL-STD-2073. All tasks must be completed using approved IUID marking equipment and MIL-SPEC materials, with finished products delivered as FOB Destination. The opportunity is categorized under NAICS code 488410 and was posted on October 16, 2026. Interested parties must submit their responses by the deadline of November 13, 2026.

Motor Vehicle Towing

POSTED

about 22 hours ago

DEADLINE

Supply of Mercury-Free Electrical Components and Raw MaterialsThis subcontract involves the supply of mercury-free raw materials, connectors, and wiring to prime contractors supporting NAVSUP Weapon Systems Support projects for the Department of Defense. The scope focuses on providing electrical components that strictly adhere to toxicity and corrosion requirements specifically designed for the demanding environments of surface ships and submarines. A critical requirement of the contract is the provision of Material Certifications and Certificates of Conformance to verify the complete absence of mercury in all delivered goods. The opportunity is categorized under NAICS code 335931, with a response deadline set for November 13, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 22 hours ago

DEADLINE

Manufacture of CBL ACTR/LOCK PWR (NSN 6150-01-685-9963)This subcontract involves the manufacture of CBL ACTR/LOCK PWR assemblies, identified by NSN 6150-01-685-9963, for prime contractors supporting the Department of Defense Navsup Weapon Systems Support Mech. The selected vendor is responsible for fabricating cable assemblies according to drawing 8630048-1, ensuring all finished products are properly identified, packaged, and delivered. Strict compliance with technical and quality standards is required, including configuration control per MIL-STD-973 and marking per MIL-STD-129. Eligible vendors must hold ISO 9001 and PRO-020 certifications and guarantee the use of mercury-free materials. The response deadline for this opportunity is November 13, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 22 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports the Department of Defense through the Navsup Weapon Systems Support Mech agency. The scope of work involves the preservation, packaging, and marking of finished subassemblies for prime contractors. All deliverables must be shipping-ready containers that strictly adhere to Navy standards, specifically utilizing MIL-SPEC materials and industrial marking equipment. Technical execution requires strict compliance with MIL-STD-2073 for packaging and MIL-STD-129 for marking, with a specific requirement for LEVEL 1 red markings. The opportunity is categorized under NAICS code 488510, with a response deadline set for November 13, 2026.

Freight Transportation Arrangement

POSTED

about 22 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS