Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Long-Term Maintenance and Service Support

Active

Federal

Response Deadline08/13/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract provides long-term maintenance and service support for installed ultra-low temperature freezers, encompassing ongoing preventive maintenance, regular calibration, alarm system verification, and prompt emergency repairs to ensure operational continuity and equipment reliability. Remote diagnostics capabilities are included to facilitate proactive issue identification and reduce downtime, supporting sustained performance over the contract period. The work is designated as a Small Business Set Aside under NAICS code 811211, restricted to small businesses, and falls under a subcontract structure managed by the Department of Commerce, National Institute of Standards and Technology. The solicitation was posted on July 31, 2026, with responses due by August 13, 2026, and performance will be carried out at unspecified locations under the oversight of the agency.

General Info

Long-term maintenance for ultra-low temperature freezers with remote diagnostics, limited to small businesses under NIST oversight.

Agency

Department Of Commerce NistView Agency

NAICS

811211 - Consumer Electronics Repair and MaintenanceView NAICS

Place of Performance

MD

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 31

subcontract

Response DeadlineAug 13

Submission deadline

Response Deadline

08/13/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Commerce Nist

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Commerce Nist

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Ongoing preventive maintenance, calibration, alarm checks, and emergency repairs for installed ultra-low temperature freezers, supporting remote diagnostics and long-term reliability.

Similar Contracts

Same NAICS industry code

EV Charging Station Inspection & MaintenanceThis contract involves the inspection, troubleshooting, and repair of electric vehicle charging stations, requiring comprehensive technical expertise in electrical safety assessments, communication system diagnostics, and user interface maintenance. The work demands a skilled technician capable of identifying and resolving hardware and software issues to ensure continuous, safe operation of charging infrastructure. The contract is structured as a subcontract under a Small Business Set Aside designation, specifically reserved for small businesses, with the North American Industry Classification System code 811211 indicating it falls under repair and maintenance services. The solicitation was posted on July 31, 2026, with a response deadline of August 21, 2026, and is governed by the Department of the Interior through its Ner Services Mabo (43000) entity, though the specific location of performance remains undetermined. All tasks must comply with relevant safety standards and operational requirements to support the reliability of public and federal EV charging networks.

Ner Services Mabo (43000)

POSTED

DEADLINE

Preventive & Remedial Maintenance – SP 200/CCC DispensersThe contract calls for comprehensive preventive and remedial maintenance services for ScriptPro SP 200 and CCC robotic dispensing units, encompassing all aspects of mechanical, electrical, and software diagnostics and repairs. Services include routine inspections, troubleshooting malfunctions, component replacements, calibration, and software updates to ensure uninterrupted operation and regulatory compliance in high-volume pharmacy environments. The work requires skilled technicians with proven experience in automated dispensing systems, capable of performing on-site or remote diagnostics and delivering timely resolutions to minimize downtime. The contract is classified as a subcontract under NAICS code 811211, with a posting date of July 31, 2026, and a response deadline of August 10, 2026. The contracting office is the Department of Veterans Affairs through the 256-NETWORK Contract Office 16 (36C256), and performance location details are unspecified. No set-aside designation or point of contact information is provided, and the solicitation number is not listed. Interested parties must respond through the SAM. gov platform prior to the deadline to be considered for award.

256-NETWORK Contract Office 16 (36C256)

POSTED

DEADLINE

Military-Compliant Labeling and Bar-Coding ServicesThe contract requires the application of durable labels and barcodes to military containers and units in strict compliance with MIL-STD-129 standards to enable accurate automated logistics tracking. All labeling must meet the Department of Defense’s DLA RQ017 marking requirements, ensuring full interoperability with defense supply chain systems. The work involves precise, high-reliability marking procedures to maintain legibility and scannability through harsh operational environments and extended storage periods. This is a subcontract opportunity issued under the NAICS code 811211, with a response deadline of August 10, 2026, and a posting date of July 30, 2026. The contracting entity is the Active Devices Division within the Department of Defense, and performance is expected to support military logistics operations without specified geographic limitations. Bidders must be prepared to demonstrate capability in adhering to federal military labeling standards and delivering error-free, traceable unit identification through standardized barcode formats.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Quality Inspection and Acceptance SupportThe contract requires the performance of origin inspections on delivered items using either MIL-STD-1916 or ASQ Z1.4 sampling plans, with a strict zero tolerance policy for critical defects, ensuring only conforming products are accepted. The work is focused on quality assurance activities to verify that all goods meet established military and industry standards prior to acceptance. The inspection must be conducted at the point of delivery, with rigorous adherence to defined sampling methodologies to detect any non-conformances that could impact safety, functionality, or mission readiness. The contract is issued under the NAICS code 811211 and is classified as a subcontract by the ASC COMMODITIES DIVISION under the Department of Defense. Performance is required at the location in Tracy, California, with a zip code of 95304-5000. The solicitation was posted on July 30, 2026, with a response deadline of August 7, 2026. Interested parties must submit proposals by the stated deadline, and the work is expected to be carried out in compliance with federal procurement requirements for defense-related quality control services.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Quality Assurance & AQL Inspection ServicesThe contract requires the execution of AQL inspections on cable assemblies in accordance with MIL-STD-105E, applying an Acceptable Quality Level of 1.0 for major defects and 4.0 for minor defects. All inspections must be thoroughly documented with final inspection reports and non-conformance issues must be systematically tracked and reported to ensure compliance with quality standards. The work is classified as a subcontract under the NAICS code 811211, and performance is to occur at a facility located in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 30, 2026, and responses are due by August 7, 2026, under the auspices of the ASC Commodities Division within the Department of Defense.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

MIL-STD-129 Bar-Coding and Marking ServicesThe contract requires the application of 2D Data Matrix bar codes and permanent markings on items and packaging in strict compliance with MIL-STD-129 standards to support logistics tracking by the Defense Logistics Agency. This work is essential for ensuring accurate identification, traceability, and inventory management across the Department of Defense supply chain, with all markings must meet military specifications for durability, readability, and placement. The services are scoped for performance at the specified location in Texarkana, Texas, with the ZIP code 75507-5000, and the work is classified as a subcontract under NAICS code 811211. The solicitation was posted on July 30, 2026, with a response deadline of August 10, 2026, indicating a limited window for qualified vendors to submit proposals. The contracting entity is the Land Supply Chain organization under the Department of Defense, and the contract is managed through the DIBBS platform. Although no set-aside provisions or point of contact information are provided, the requirement is focused solely on the technical execution of bar code and marking services aligned with federal military standards, with no additional administrative or logistical responsibilities implied beyond compliance and delivery.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Hazardous and Radioactive Materials Labeling and MarkingThe contract requires the application of compliant hazard warning labels and shipment markings for hazardous and radioactive materials in accordance with MIL-STD-129 and applicable federal regulations, ensuring proper identification and safe handling during transport and storage. The work must be performed at the place of performance in New Cumberland, Pennsylvania, with ZIP code 17070-5002, and all labeling must meet rigorous military and regulatory standards to maintain compliance and operational safety. This is a subcontract solicitation posted on July 30, 2026, with responses due by August 10, 2026, under the NAICS code 811211, which corresponds to other services related to repair and maintenance. The contracting activity is under the ACTIVE DEVICES DIVISION of the Department of Defense, indicating the work supports defense logistics and material handling requirements. There is no specified set-aside type or point of contact provided, and the opportunity is accessible through the DIBBS platform at the specified URL for submission and further details.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Military Shipment Marking and Labeling ServicesThe contract pertains to the application of MIL-STD-129-compliant markings for military shipments, requiring precise implementation of barcodes, handling labels, and hazard warnings to ensure compliance with U.S. Department of Defense standards. This subcontract service is critical for the accurate identification, tracking, and safe handling of military cargo, with all labeling must align precisely with the mandated specifications to maintain operational readiness and logistical integrity. The work is to be performed at the designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 30, 2026, with a deadline for responses set for August 10, 2026, and is classified under NAICS code 811211, which corresponds to commercial and industrial machinery and equipment repair and maintenance. The contracting activity falls under the Fluid Handling Division of the Department of Defense, indicating the specialized nature of the shipments involved, potentially including sensitive or hazardous fluid systems. This effort supports the broader logistics infrastructure of the military supply chain, demanding strict adherence to federal standards and reliable execution on a subcontract basis.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Medical Equipment Installation and Integration SupportThe contract requires on-site installation, calibration, and integration of KARL STORZ medical equipment with existing clinical systems at a location in Eagan, Minnesota, with a zip code of 55121. The work involves close coordination with VA IT and clinical staff to ensure seamless operation and compliance with institutional standards. This is a subcontract designated as a Service-Disabled Veteran-Owned Small Business set-aside, meaning only businesses owned and controlled by service-disabled veterans are eligible to bid. The NAICS code 811211 identifies the work as medical equipment repair and maintenance services. The solicitation was posted on July 30, 2026, with a response deadline of August 12, 2026, and is managed by the Department of Veterans Affairs through Network Contract Office 23.

Network Contract Office 23 (36C263)

POSTED

DEADLINE

Preventative Maintenance Services for CRxFlex II X-ray SystemsThe contract requires comprehensive preventative maintenance services for two CRxFlex II X-ray systems located at Seymour Johnson Air Force Base in Goldsboro, North Carolina, with a ZIP code of 27531. The scope of work includes performing mechanical inspections, electrical checks, optical cleaning, system alignment, and full calibration to ensure optimal performance and safety of the X-ray equipment. All services must be carried out in accordance with manufacturer specifications and applicable military standards to maintain operational readiness. The contract is structured as a small business set-aside under NAICS code 811211, indicating it is reserved exclusively for small business concerns as defined by the Small Business Administration. The opportunity was posted on July 30, 2026, with a firm deadline for responses on August 13, 2026, at 2:00 PM. The contracting activity is managed by the 4th Cons Squadron CC under the Department of Defense, and while no specific point of contact is listed, all work must be completed at the designated place of performance in Goldsboro.

FA4809 4TH Cons Squadron Cc

POSTED

DEADLINE

Radiographic Room (X-Ray) Equipment MaintenanceThe contract entails comprehensive preventive and corrective maintenance services for LUMINOS DEF MAX radiographic rooms, covering critical components such as the generator, patient table, detector, software systems, and all associated safety compliance measures. Maintenance must ensure uninterrupted operational performance, adherence to regulatory standards, and prompt resolution of any malfunctions to minimize downtime in clinical environments. The scope requires skilled technical personnel with expertise in advanced radiographic equipment to perform routine inspections, calibration, repairs, and software updates as needed. This subcontract is issued under the NAICS code 811211 and is managed by the Department of Veterans Affairs through the 262-NETWORK Contract Office 22. The solicitation was posted on July 30, 2026, with a response deadline of August 14, 2026. While specific performance location details are not provided, the work is expected to occur at VA facilities where LUMINOS DEF MAX systems are installed. The contract emphasizes reliability, compliance, and operational readiness to support uninterrupted medical imaging services for veterans.

262-NETWORK Contract Office 22 (36C262)

POSTED

DEADLINE

Repair and Maintenance for C-Arm Imaging SystemsThe contract requires comprehensive preventive and corrective maintenance services for CIOS ALPHA mobile C-arm imaging systems, encompassing all critical components including X-ray tubes and detectors, with specific attention to calibration, software updates, and full documentation of all work performed. This maintenance must ensure continued operational readiness and compliance with technical standards for medical imaging equipment used in clinical environments. All servicing must be performed by qualified personnel using approved procedures and parts to maintain system integrity and regulatory compliance. The contract is categorized as a subcontract under NAICS code 811211, issued by the Department of Veterans Affairs through the 262-NETWORK Contract Office 22. The opportunity was posted on July 30, 2026, with a response deadline of August 14, 2026, at 7:00 PM. Performance location details are not specified, and no set-aside designation is indicated. Interested parties must submit proposals by the stated deadline to be considered for award, and successful bidders will be expected to deliver consistent, documented support to maintain the reliability and safety of the C-arm systems across the VA’s healthcare network.

262-NETWORK Contract Office 22 (36C262)

POSTED

DEADLINE

More opportunities from Department Of Commerce Nist

Same awarding agency

Spare Parts and Consumables SupplyThe contract is for the supply of critical spare parts and consumables necessary to maintain the continuous operation of ultra-low temperature freezers, including essential components such as compressors, controllers, and door seals, as well as consumables like batteries and cleaning agents. The requirement is structured as a subcontract under a Small Business Set Aside designation, ensuring eligibility and prioritization for small businesses, with the NAICS code 423440 indicating classification under wholesale trade of motor vehicle parts and supplies. The solicitation was posted on July 31, 2026, with responses due by August 13, 2026, and is managed by the Department of Commerce, specifically under NIST, though specific performance location and point of contact details are not provided. The nature of the supply is mission-critical, aimed at sustaining serviceability and minimizing downtime for sensitive laboratory equipment requiring precise temperature control.

Other Commercial Equipment Merchant Wholesalers

POSTED

DEADLINE

Post-Delivery Installation and Commissioning ServicesThe contract calls for on-site installation, leveling, electrical verification, and operational testing of ultra-low temperature freezers at the NIST facility in Gaithersburg, with full support for government acceptance testing. All work must be performed at the specified location to ensure the equipment meets stringent performance and safety standards required for federal laboratory use. The services are critical to validating proper functionality prior to formal acceptance by government personnel. This is a Small Business Set Aside subcontract under NAICS code 811212, limited to small business concerns, and the response deadline is August 13, 2026. While specific details about contract value or deliverables beyond installation and testing are not provided, the scope emphasizes precision and compliance with federal infrastructure requirements. The solicitation was posted on July 31, 2026, and is managed by the Department of Commerce through the National Institute of Standards and Technology.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Upright Ultra-Low Temperature Freezers SupplyThe contract involves the supply and delivery of six fully assembled upright ultra-low temperature freezers designed to maintain a consistent temperature of -86°C, equipped with CFC-free refrigerants, digital temperature controls, audible and visual alarms, and stainless-steel interiors to ensure durability and compliance with laboratory standards. An optional provision allows for the procurement of up to three additional units, bringing the total potential order to nine freezers, subject to future exercise by the contracting entity. All units must meet stringent performance and safety specifications to support critical research applications. This is a Small Business Set Aside subcontract under NAICS code 333318, reserved exclusively for small businesses, issued by the Department of Commerce through NIST. The solicitation was posted on July 31, 2026, with responses due by August 13, 2026, at 5:00 PM. While the place of performance and point of contact details are not specified, the contract is governed under federal acquisition regulations and intended for use within U.S. government research facilities supporting scientific and technical missions.

Other Commercial and Service Industry Machinery Manufacturing

POSTED

DEADLINE

Secure Delivery and Logistics to NIST CampusThe contract pertains to the secure transportation and final delivery of the SDR system to the National Institute of Standards and Technology’s Gaithersburg, Maryland facility under F.O.B. Destination terms, meaning the vendor assumes full responsibility for the shipment until it reaches the designated receiving location. Successful performance requires close coordination with NIST’s on-site receiving staff, strict adherence to a predefined delivery schedule, and full compliance with all campus access protocols, including security clearances, vehicle restrictions, and personnel screening procedures. The delivery must be executed with precision to ensure the integrity and safety of the sensitive equipment throughout transit and upon arrival. This subcontract is designated as a Small Business Set Aside under NAICS Code 484220, indicating it is reserved exclusively for small businesses in the truck transportation industry. The opportunity was posted on July 31, 2026, with responses due by August 14, 2026, and is managed by the Department of Commerce through NIST. Performance is required entirely at the Gaithersburg campus with a ZIP code of 20899. Bidders must demonstrate capability in handling high-security logistical operations, maintaining schedule integrity, and navigating federal facility requirements to meet the stringent expectations of the contracting entity.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Technical Documentation and Compliance PackagingThe contract requires the preparation and submission of comprehensive technical compliance documentation for products, including detailed specifications, country of origin statements, warranty terms, manufacturer authorization letters, and forms that meet Federal Acquisition Regulation requirements. All documentation must be accurate, complete, and fully aligned with federal procurement standards to ensure eligibility and compliance. Additionally, the contractor is responsible for packaging and labeling goods in strict accordance with F.O.B. Destination guidelines, ensuring proper handling, tracking, and delivery compliance. This is a Small Business Set Aside subcontract under NAICS code 541611, awarded by the Department of Commerce through its National Institute of Standards and Technology. The solicitation was posted on July 31, 2026, with a response deadline of August 14, 2026, and performance is expected to be conducted at Gaithersburg, Maryland, with a zip code of 20899. The opportunity is reserved exclusively for small businesses, emphasizing support for small business participation in federal technical and compliance services.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

High-Performance Software-Defined Radio (SDR) System SupplyThe contract is for the supply and delivery of a commercially available high-performance software-defined radio system equivalent to the NI USRP X420, requiring full integration of firmware, software, power supplies, cabling, and all necessary accessories. The system must be new, factory-sealed, and procured exclusively from an authorized U.S. distributor to ensure authenticity and compliance with technical standards. All components must be delivered as a complete, operational unit ready for immediate deployment without requiring additional configuration or parts. This is a small business set-aside subcontract under NAICS code 334220, awarded by the Department of Commerce through NIST, with performance located in Gaithersburg, Maryland. The solicitation was posted on July 31, 2026, and responses are due by August 14, 2026. The requirement emphasizes strict adherence to sourcing guidelines and system equivalence to ensure compatibility with existing infrastructure and operational performance benchmarks. Only qualified small businesses may respond, and delivery must align with the designated place of performance to support government missions requiring secure, reliable, and high-performance radiofrequency capabilities.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

DEADLINE

Specialized Instrumentation Transportation and DeliveryThe contract pertains to the specialized transportation and delivery of sensitive metrology equipment under FOB Destination terms, requiring secure, climate-controlled logistics to ensure the integrity and functionality of the instruments en route to the National Institute of Standards and Technology in Gaithersburg, Maryland. The equipment is highly precise and environmentally sensitive, mandating strict adherence to temperature, humidity, shock, and vibration controls throughout transit, with all handling protocols aligned to maintain calibration standards and prevent field degradation. The opportunity is issued as a subcontract under NAICS code 484220, which classifies it within the truck transportation sector, and is managed by the Department of Commerce through NIST. The solicitation was posted on July 31, 2026, with a firm response deadline of August 11, 2026, at 3:00 PM local time. All deliveries must terminate at the designated place of performance in Gaithersburg, with the contractor assuming full responsibility for the condition of the equipment upon arrival and compliance with all federal handling, tracking, and documentation requirements for federal scientific assets.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Supply of Metrology-Grade Chilled Mirror HygrometersThe contract seeks the procurement and delivery of two high-precision chilled mirror dew point hygrometers certified to NIST traceability standards, specifically for deployment in mass calibration laboratories at NIST’s Gaithersburg facility. These instruments must meet exacting metrology requirements to ensure accurate humidity measurements critical to calibration workflows, with all components and calibration procedures adhering to international metrology benchmarks. Delivery timelines are tightly aligned with the response deadline of August 11, 2026, and the contract is structured as a subcontract under the Department of Commerce, NIST, with NAICS code 334516 indicating classification within instrument manufacturing. Performance is restricted to the Gaithersburg location, where the hygrometers will be integrated into existing calibration systems to support traceability chain integrity for mass and humidity standards. The requirement emphasizes validated accuracy, long-term stability, and documented traceability to NIST reference standards, with no set-aside provisions indicated.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Technical Support and Beamforming Test AssistanceThe contract seeks ongoing technical support and specialized beamforming test assistance related to the deployment and post-deployment phases of 5G communication systems. This subcontract is issued by the Department of Commerce through its National Institute of Standards and Technology and is classified under NAICS code 541330, indicating it involves scientific and technical consulting services. The work requires expert-level capabilities in beamforming methodologies to ensure accurate performance validation, system optimization, and troubleshooting during and after 5G infrastructure rollouts. The solicitation was posted on July 31, 2026, with a response deadline of August 9, 2026, allowing potential contractors a limited window to submit proposals. The place of performance and specific location details are not defined, suggesting flexibility in execution, potentially encompassing remote support or on-site work at various NIST facilities or test environments. No set-aside provisions are indicated, meaning the opportunity is open to all eligible entities regardless of business size or ownership characteristics.

Engineering Services

POSTED

DEADLINE

On-Site 5G System Installation and CommissioningThe contract calls for full on-site installation and commissioning services for a 5G system at the National Institute of Standards and Technology facility in Gaithersburg, Maryland, with specific requirements including staging, system commissioning, RAN LLD documentation, and beamforming test support. All work must be performed at the designated NIST location and is intended to ensure the proper deployment and validation of advanced wireless infrastructure for research and testing purposes. The task is structured as a subcontract under NAICS code 238990, with a response deadline of August 9, 2026, and a solicitation posted on July 31, 2026, indicating a limited window for qualified vendors to submit proposals for this specialized technical engagement.

All Other Specialty Trade Contractors

POSTED

DEADLINE

5G Software Licensing and Annual RAN CARES SupportThe contract titled 5G Software Licensing and Annual RAN CARES Support entails the provision of 5G main software, associated Value Pack licenses, and annual RAN CARES Bronze technical support services. This subcontract is issued under the NAICS code 511210 by the Department of Commerce, specifically through its NIST division, and encompasses both a base period and optional extension periods to ensure continuous software functionality and technical assistance. The licensing components are critical for enabling and maintaining 5G network infrastructure, while the Bronze-level support ensures baseline maintenance, troubleshooting, and updates throughout the contract term. The solicitation was posted on July 31, 2026, with a deadline for responses set for August 9, 2026, indicating a short but standard procurement window typical for technical software and support agreements. The place of performance and office address details are not specified, suggesting that delivery and support may be delivered remotely or according to vendor capabilities. This agreement is structured as a subcontract, implying the work will be performed by a third-party vendor in support of the Department of Commerce’s broader technological initiatives, likely related to advancing next-generation communications systems under NIST’s mission.

Software Publishers

POSTED

DEADLINE

64T64R mMIMO Antenna SupplyThe contract calls for the procurement of a single 64T64R massive MIMO antenna designed to be fully compatible with Nokia’s 5G gNB solution for outdoor deployment conditions. The requirement emphasizes technical alignment with Nokia’s existing 5G infrastructure, ensuring seamless integration, optimal performance, and compliance with industry standards for high-capacity, wide-coverage wireless networks. The antenna must meet stringent environmental resilience specifications to operate reliably in varied outdoor climates without degradation in signal quality or durability. This procurement is structured as a subcontract under the Department of Commerce’s National Institute of Standards and Technology, with the North American Industry Classification System code 334220 indicating a focus on telecommunications equipment manufacturing. The solicitation was posted on July 31, 2026, with responses due by August 9, 2026, at 4:00 PM Eastern Time. While no set-aside preferences or specific geographic performance location are detailed, the contract requires delivery and integration readiness for deployment in field environments, with the expectation that the supplier will provide a fully tested, certified, and installation-ready unit. Any proposal must demonstrate technical compliance, proven supply chain reliability, and adherence to all relevant performance benchmarks associated with 5G mmWave and sub-6 GHz spectrum support.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

DEADLINE