Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

Machine Bolt

Open
Z5500State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Nashville Electric Service has issued solicitation Z5500 for the procurement of specialized machine bolts. The required bolts must be 3/4 inch in diameter and 14 inches long, featuring a minimum thread length of 6 inches and a minimum tensile strength of 18,350 lbs. Technical specifications require the bolts to be roll threaded, hot dipped galvanized steel with a cone point and an attached square nut. To ensure quality and consistency, alternate brands are strictly prohibited for this inquiry. Bidders must submit their proposals via the Bid Center by 2:00 pm local time on the closing date of November 12, 2026. A critical component of the bid is the delivery timeline, which must be stated in calendar days, as delivery speed may be a deciding factor in the award. All items must be shipped in standard cartons, as bulk packaging is not accepted. For any clarifications regarding discrepancies between ordering descriptions and part numbers, vendors are directed to contact the primary procurement contact, Tiffany Caruthers, prior to the close date.

General Info

Nashville Electric Service seeks specific specialized machine bolts by November 12, 2026.

Agency

Tennessee → Nashville Electric Service

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

Nashville, TN, USA

Set-Aside

NONE

Documents

1
PDF, High priority: read this firstrfb
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyTennessee → Nashville Electric Service
Contacts1 person available
OfficeNashville, TN, USA
Organization / AgencyTennessee → Nashville Electric Service
Office AddressNashville, TN, USA
Contacts
Tiffany CaruthersProcurement Contact
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
EA BOLT MACHINE 3/4X14 MACHINE BOLT,3/4" DIAMETER X 14" LONG; 6" MINIMUM THREAD LENGTH, 18,350 LBS MIN IMUM TENSILE STRENGTH, ROLL THREADED, HO T DIPPED GALVANIZEDSTEEL, CONE POINT WITH A SQUARE NUT ATTACHED. TO BE SHIPPED IN STANDARD CARTONS. NO BULK PACK ACCEPTED. UTILSVC 5195 GRID POW U8914 MACLEAN J8914 PWERLINE P8914 HUGHES B B714 STL CTY SC8914BG COOPER DF4B14 HUBBEL 8914 ALLIED B 8244 AMI AMI-8914 Stateyour earliest delivery IN CALENDAR DAYS: _ DELIVERY MAY BE CONSIDEREDIN THE AWARDOF THIS BID. _ Alternate brands will not be accepted on this inquiry. To have your product evaluated for future consideration, contact the buyerlisted in this RFB. _ In the eventof a discrepancy between the ordering description and part number, it is the responsibility of the vendor to contact the buyerfor clarification before the published CLOSE DATE. _ Note: This bid must be submitted usingthe Bid Center and must be received by 2:00 pm localtime on the published CLOSE DATE. _

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
Supply of Hexagon Head Cap ScrewsThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves the supply of 250 Hexagon Head Cap Screws identified by NSN 5305015885151. The contract is designated under NAICS code 332722 and requires the supplier to provide industrial fasteners to prime contractors. Performance for this contract will take place in New Cumberland, Pennsylvania. The agreement mandates strict adherence to the Berry Amendment and the Buy American Act to ensure all materials meet domestic origin requirements. Shipping will be handled according to FOB Origin and First Destination Transportation terms. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Manufacturing of Critical Application Machine Bolts (MS35764-261)This subcontract involves the manufacture of 1,104 critical application machine bolts for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The parts must be fabricated according to MS35764H, MIL-DTL-45912C, and TDP Rev A Gen 1 specifications using precision machining, with a strict prohibition on additive manufacturing. Performance will take place in Tracy, California, under NAICS code 332722. The contractor must ensure full compliance with the Berry Amendment and maintain a quality system that adheres to either SAE AS9003 or ISO 9001 standards. Final deliverables must be packaged and labeled in accordance with MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N. The response deadline for this requirement is November 13, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Manufacturer of Flat Washers (NSN 5310-00-178-0607)This subcontract involves the manufacture and delivery of 48 flat washers for prime contractors supporting DLA Weapons Support ASC projects. The parts must be produced according to NSN 5310-00-178-0607 technical data and adhere to either SAE AS9003 or ISO 9001 quality systems. All items must be packaged and marked in accordance with ASTM D3951, RP001, and MIL-STD-129 standards, with final delivery handled as FOB Origin to Robins Air Force Base. To be eligible, the contractor must maintain CMMC Level 2 certification and ensure full compliance with ITAR and EAR regulations. Additionally, access to the US/Canada Joint Certification Program is required. The opportunity is categorized under NAICS code 332722 and is managed by the Department of Defense.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Precision Machine Screw FabricationThis subcontract involves the fabrication of 72 custom machine screws for prime contractors supporting DLA supply contracts. The screws must be manufactured to 1/4-28 UNF-2A x 1-5/8 specifications using steel that conforms to MIL-S-6050/AMS6280, adhering to Hamilton Sundstrand Corporation part number 69608-428-26. Production requires the use of precision CNC turning and threading equipment, with quality control sampling performed according to MIL-STD-1916 or ASQ H1331 standards. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 13, 2026, for this precision manufacturing requirement categorized under NAICS code 332722.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Precision Manufacture of Shoulder Bolts (NSN 5306-01-053-0198)This subcontract involves the precision manufacture of 245 shoulder bolts for the DLA Weapons Support ASC Commodities Division under NSN 5306-01-053-0198. The contractor is responsible for fabricating the units according to Basic Drawing NR 55820 43390 Revision E and ensuring all items meet quality control standards per MIL-STD-1916 or ASQ H1331. The project requires support for source inspection of critical application items and final delivery of packaged bolts to DLA Distribution Cherry Point in accordance with MIL-STD-2073-1E. To be eligible, the contractor must hold US/Canada Joint Certification Program certification and maintain CMMC Level 2 compliance. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 332722. The performance of the contract is centered in Cherry Point, North Carolina.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Precision Retaining Ring ManufacturingThis subcontract, issued by the Department of Defense DLA Weapons Support ASC Commodities Division, requires the precision manufacture of 4,982 retaining rings under NSN 5325002516131. Production must strictly adhere to TDP Rev A Gen 1 and Basic Drawing NR 07482 9646M06 Revision D. The project is designated as a Total Small Business Set-Aside under NAICS code 332722, with performance taking place at Robins Air Force Base. The contractor must utilize precision machining equipment and maintain strict compliance with DFARS 252.204-7012. Quality control and sampling are governed by FAR 52.246-2 and either MIL-STD-1916 or ASQ H1331 standards. The final deliverable consists of 4,982 conforming retaining rings intended for prime contractors fulfilling DLA supply contracts.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Manufacture of Machine Bolts (NSN 5306-01-118-6417)This subcontract involves the manufacture of 484 machine bolts under NSN 5306-01-118-6417 for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for fabricating the bolts using precision CNC machining or cold-heading equipment in strict accordance with MS35764H Revision H and MIL-DTL-45912C Revision C. All deliverables must adhere to MIL-STD-130N and MIL-STD-129 for marking, as well as DLA RP001 and MIL-STD-2073-1E for packaging. To be eligible, the provider must maintain ISO 9001 or SAE AS9003 certification and ensure full compliance with NIST SP 800-171 standards. The project is categorized under NAICS code 332722, with the place of performance located in Tracy, California. The response deadline for this requirement is November 13, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Precision Manufacturer - Flat Washers (NSN 5310-01-592-9749)This subcontract involves the manufacture and supply of 12 high-precision flat washers for the DLA Weapons Support ASC Commodities Division. The items must be produced according to Basic Drawing NR 43689 709-5486674 Revision M, with strict prohibitions against the use of mercury or additive manufacturing. All materials and processes must comply with the Buy American Act and the Berry Amendment, and the final products must be packaged in accordance with MIL-STD-2073-1E and MIL-STD-129. Qualified providers must possess precision machining equipment and hold JCP certification along with either SAE AS9003 or ISO 9001 certification. The performance location for this contract is Tracy, California. Interested parties must submit their responses by November 13, 2026, for this Department of Defense requirement under NAICS code 332722.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Flat Washer Manufacturing (NSN 5310008517171)This subcontract involves the manufacture and supply of 528 flat washers under NSN 5310008517171 for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for fabricating the units using precision metal stamping or machining, ensuring all items are mercury-free and meet strict quality assurance standards per MIL-STD-1916 or ASQ H1331. The scope of work includes packaging and marking the finished products in accordance with MIL-STD-2073-1E, MIL-STD-129, and DLA RP001. Once completed, the washers must be delivered to DLA Distribution San Joaquin in Tracy, California. The project falls under NAICS code 332722 and is managed by the Department of Defense.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Supply of Hexagon Head Cap Screws (NSN 5305-01-60-47693)This subcontract involves the supply of 63 units of hexagon head cap screws, specifically matching NSN 5305-01-60-47693, to support prime contractors for the DLA Weapons Support ASC Commodities Division. The deliverables must strictly adhere to DLA Packaging Requirements RP001 and MIL-STD-2073-1E, while following marking standards RQ017 and MIL-STD-129. Performance for this contract is based in New Cumberland. To be eligible, the provider must maintain ITAR and EAR compliance, hold US/Canada Joint Certification Program certification, and meet CMMC Level 2 cybersecurity standards. The opportunity was posted on November 5, 2026, with a response deadline of November 13, 2026, falling under NAICS code 332722.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Manufacture of Shear Bolts (NAS626-30)This subcontract involves the manufacture of 1,020 high-strength shear bolts, specifically NSN 5306-00-813-8089, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The work requires precision machining and forming in strict accordance with TDP Rev C Gen 3 and NAS624 through NAS644 standards, with a specific prohibition against the use of additive manufacturing. Quality assurance must be maintained through sampling per MIL-STD-1916 or ASQ H1331. To be eligible, the provider must hold SAE AS9003 or ISO 9001 certification and maintain full DFARS cybersecurity compliance. The project is categorized under NAICS code 332722, with performance taking place in New Cumberland. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Supply of Plain Hexagon Nuts (NSN 5310010470393)This subcontract involves the supply of 977 plain hexagon nuts, identified by NSN 5310010470393, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The contractor is responsible for manufacturing or sourcing the nuts in accordance with NAS1423 Revision 5 and FF-N-836F(1) standards. All deliverables must be sent to DLA Distribution centers, with the place of performance located at Hill AFB. Strict quality and regulatory requirements are in place, including quality assurance inspections per MIL-STD-1916 or ASQ H1331 and packaging compliance with MIL-STD-2073-1E, MIL-STD-129, and RP001. Additionally, the contractor must adhere to the Buy American Act for materials and maintain NIST SP 800-171 cybersecurity compliance. The response deadline for this opportunity is November 13, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Tennessee → Nashville Electric Service

Same awarding agency

NAICS: 423440
New
SLED
Industrial Adhesive/Threadlocker SupplyThis subcontract agreement outlines the procurement of industrial-grade threadlocking adhesive for the Nashville Electric Service. The contract specifically requires the delivery of 10 units of Threadlocker M, identified by item number 120497200, to a designated location in Nashville. To be eligible for this award, the supplier must be an approved manufacturer or an authorized distributor of the specified part number. The solicitation was posted on November 5, 2026, with a response deadline of November 11, 2026. Classified under NAICS code 423440, the contract is open to prime contractors or direct procurement. Interested parties can find further details and submission guidelines through the official Nashville Electric Service vendor portal.
Other Commercial Equipment Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 326199
New
SLED
High-Density Polyethylene (HDPE) Electrical Pedestal SupplierThis subcontract agreement establishes a partnership for the supply of specialized high-density polyethylene electrical service pedestals intended for prime contractors working on Nashville Electric Service utility projects in Nashville. The supplier is responsible for manufacturing two-section pedestals featuring a removable top and an optional lower cover inscribed with the word ELECTRIC. Technical specifications require the lower half opening to measure approximately 11 by 14 inches and the use of stainless steel hardware, specifically penta-head bolts and padlock provisions. The procurement process is managed under NAICS code 326199, with a posting date of November 5, 2026, and a response deadline of November 13, 2026. The selected vendor will be tasked with the delivery of finished HDPE pedestals that meet all specified design and material requirements for the agency.
All Other Plastics Product Manufacturing

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 423830
New
SLED
Supplier of Hand-Operated Header Tools for 1/2 Thread RivnutsThis subcontract agreement involves the supply of ten hand-operated header tools specifically designed for 1/2 thread rivnut fasteners to support prime contractors working on Nashville Electric Service projects in Nashville. The contract mandates the delivery of either VALMONT 131638 or IUSI C-722 tools, explicitly stating that no alternate brands will be accepted. The opportunity was posted on November 5, 2026, with a response deadline of November 10, 2026. It falls under NAICS code 423830 and is managed through the Nashville Electric Service procurement system.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 333318
New
SLED
Supply of Galvanized Steel Machine BoltsThis subcontract agreement involves the supply of specialized galvanized steel machine bolts for prime contractors working on Nashville Electric Service utility projects in Nashville. The required hardware consists of bolts with a 3/4 inch diameter and 14 inch length, featuring a cone point and an attached square nut. To ensure quality and compatibility, the contract specifies that products must be sourced from approved brands including Maclean, Cooper, Hubbell, or Allied. Strict logistical guidelines are in place, requiring all shipments to be delivered in standard cartons with a prohibition on bulk packing. Interested parties must adhere to the procurement timeline, with the solicitation posted on November 5, 2026, and a response deadline set for November 12, 2026.
Other Commercial and Service Industry Machinery Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 423610
New
SLED
Supply of Prefilled Tinned Aluminum Compression LugsThis subcontract involves the supply of 750 tinned aluminum compression lugs for prime contractors working on Nashville Electric Service projects in Nashville. The required lugs must be prefilled with ALNOX-UG-HV high voltage inhibitor, feature two-hole NEMA spacing for 1/2 inch stud sizes, and be compatible with Kearney tools using a 5/8 die. To ensure quality and compatibility, all supplies must be sourced from approved manufacturers, specifically HOMAC, PENN-UN, ASKINC, or CONNECTO. The solicitation was posted on November 5, 2026, with a response deadline of November 11, 2026.
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 334413
New
SLED
Polymer Spool Insulator SupplyThis subcontract agreement involves the supply of polymer spool insulators for prime contractors working on Nashville Electric Service utility projects in Nashville. The contractor is responsible for manufacturing or sourcing insulators that measure 3-1/8 inches in diameter and 3 inches in height, ensuring all products strictly adhere to ANSI 53-2 standards. To ensure quality and compatibility, the contract mandates the use of specific approved brands, including Hendrix HPI-53-2, Aluma-Fo INS-53-2, Preforme IP-53-2, or Hubbell C9091032PG. The scope of work concludes with the delivery of the completed polymer spool insulators to the designated project sites.
Semiconductor and Related Device Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 325520
New
SLED
Threadlocker
Solicitation # Z5494
Nashville Electric Service has issued Request for Bid Z5494 for the procurement of 10 units of Permatex 24010 Medium Strength Blue Threadlocker in .35 oz containers. This solicitation is strictly limited to the specified part number, and alternate brands will not be accepted. Bidders are required to state their earliest delivery timeframe in calendar days, as the delivery schedule may be a determining factor in the final award decision. All bids must be submitted through the Bid Center by 2:00 pm local time on November 11, 2026. It is the responsibility of the vendor to contact the procurement contact, Alan Martinez, for clarification regarding any discrepancies between the ordering description and the part number prior to the closing date. The place of performance for this contract is Nashville, Tennessee.
Adhesive Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 326199
New
SLED
Pedestal
Solicitation # Z5498
Nashville Electric Service has issued Request for Bid Z5498 for 80 High Density Polyethylene Service Pedestals. These pedestals must be Munsell Green and feature a two-section design that allows for the removal of the top section and the addition of an optional cover to the lower half. Technical specifications require stainless steel hardware, including a penta-head bolt and a provision for a padlock. The lower half must have an opening of approximately 11 by 14 inches, and the cover must be inscribed with the word ELECTRIC. Only products from approved manufacturers Nordic, part number PSP-91330-MG, or Pencell, part number AN14HPXB0005P3, will be accepted, as alternate brands are prohibited. Bids must be submitted through the Bid Center by 2:00 pm local time on November 13, 2026. Vendors are required to state their earliest delivery in calendar days, as delivery speed may be a determining factor in the award decision. The primary procurement contact for this solicitation is Tiffany Caruthers.
All Other Plastics Product Manufacturing

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 423610
New
SLED
Terminal Compression
Solicitation # Z5496
Nashville Electric Service has issued solicitation Z5496 for the procurement of terminal compression lugs. These tinned aluminum lugs must fit #2 and #1 aluminum or copper cables and be prefilled with a high voltage inhibitor, specifically ALNOX-UG-HV or an equivalent. Technical specifications require the lugs to be two-hole NEMA spaced for a 1/2 inch stud size and compatible for installation using a Kearney tool with a 5/8 die. The agency strictly prohibits alternate brands, accepting only products from HOMAC (SA2-NTN), PENN-UN (FKLA-C2-D TN), ASKINC (ALM212/1.75TP), or CONNECTO (ALM2ATP). Bidders must submit their proposals via the Bid Center by 2:00 pm local time on the close date of November 11, 2026. Evaluation for the award will be based on technical compliance and the earliest delivery timeframe stated in calendar days. For clarifications, vendors should contact Buyer II Bailey Allen.
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332216
New
SLED
Header Tool
Solicitation # Z5492
Nashville Electric Service is soliciting bids for a hand-operated header tool designed for 1/2 thread rivnut fasteners. The procurement specifically requires the VALMONT 131638 or IUSI C-722 models, and the agency has explicitly stated that alternate brands will not be accepted for this inquiry. Bidders must submit their proposals through the Bid Center by 2:00 pm local time on the close date of November 10, 2026. The award process will prioritize technical compliance with the specified part numbers and the speed of delivery, which must be stated in calendar days. For any discrepancies between the ordering description and part numbers, vendors are responsible for contacting the procurement contact, Alan Martinez, for clarification prior to the closing date. The place of performance for this contract is located in Nashville, Tennessee.
Saw Blade and Handtool Manufacturing

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 326199
New
SLED
Insulator Rack Spool Polymer
Solicitation # Z5502
Nashville Electric Service has issued Request for Bid Z5502 for the procurement of 2,510 gray polymer spool insulators. The required components must adhere to ANSI 53-2 standards and measure 3-1/8 inches in diameter by 3 inches in height. Approved manufacturers and part numbers are strictly limited to Hendrix HPI-53-2, Aluma-Fo INS-53-2, Preformed IP-53-2, and Hubbell C9091032PG, with no alternate brands accepted for this inquiry. Bids must be submitted through the Bid Center by 2:00 pm local time on November 12, 2026. Vendors are required to state their earliest delivery time in calendar days, as delivery speed may be a determining factor in the award process. For any discrepancies between ordering descriptions and part numbers, vendors must contact the procurement officer, Tiffany Caruthers, for clarification prior to the closing date.
All Other Plastics Product Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 325180
New
SLED
4-Gas Mixture Calibration Cylinder SupplyThis subcontract involves the supply of specialized 4-gas calibration mixtures for prime contractors working on Nashville Electric Service projects. The required blend consists of 50% LEL Methane, 10 PPM H2S, 50 PPM CO, and 18% O2 with a Nitrogen balance. These mixtures must be filled into 116L PortaGreen reusable cylinders equipped with C-10 regulator compatible valves. The scope of work requires the delivery of five 116L cylinders to Nashville, Tennessee. This procurement falls under NAICS code 325180 and is associated with the Nashville Electric Service. Interested parties should note the response deadline of November 10, 2026.
Other Basic Inorganic Chemical Manufacturing

POSTED

2 days ago

DEADLINE

in 5 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 332722
New
SLED
Threaded Rod and Fastener Supplier
Utilities

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
SLED
Pipe Restraint and Coupling Supplier
Utilities

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
SLED
Washer Square Flat
Solicitation # Z5487
Nashville Electric Service

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 332722
Closed
SLED
Transit Vehicle Hardware and Sensor Supply
Inventory

POSTED

3 days ago

CLOSED

3 days ago
View Details
NAICS: 332722
New
SLED
NSF-61 Certified Hardware and Sealant Supply
Santa Clara Valley Water District (Valley Water)

POSTED

4 days ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
SLED
Specialized Hardware & Gasket Supplier
Public Utilities

POSTED

4 days ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
SLED
Zinc Galvanized Hardware Supply (PSST)
MODOT TRANSPORTATION

POSTED

4 days ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
SLED
One (1) Year Contract - Nuts and Bolts
Solicitation # 348
Jefferson Parish Government

POSTED

7 days ago

DEADLINE

in 4 days
View Details
NAICS: 332722
Closed
SLED
Hex Head Cap Screw Supplier
Dallas Area Rapid Transit

POSTED

7 days ago

CLOSED

about 10 hours ago
View Details
NAICS: 332722
Closed
SLED
SCREW, CAP HEX. HEAD | 2101607
Solicitation # 2101607
Dallas Area Rapid Transit

POSTED

7 days ago

CLOSED

about 10 hours ago
View Details
NAICS: 332722
Closed
SLED
Connector Wedge Bolt
Solicitation # Z5471
Nashville Electric Service

POSTED

7 days ago

CLOSED

about 10 hours ago
View Details
NAICS: 332722
SLED
Cross Brace Rods and Hardware Supply
Washington State Parks & Recreation Commission

POSTED

8 days ago

DEADLINE

in about 1 month
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS