Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Subcontract opportunity from Government of Canada was posted on February 27, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Manual & Automated Software Tester

Closed
International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541512
New
SLED
Cybersecurity Maturity Model Certification (CMMC) Program Services
Solicitation # 09112026
The University of Arkansas, Fayetteville (UAF) issued solicitation 09112026 for Cybersecurity Maturity Model Certification (CMMC) Program Services to secure a term contract for two years with two optional renewal years. The objective was to engage a qualified firm to provide cybersecurity advisory, architecture, engineering, and compliance services to mature the university's CMMC program. The scope focused on achieving compliance with CMMC Levels 1, 2, and 3 to protect Federal Contract Information (FCI) and Controlled Unclassified Information (CUI). Key deliverables included a compliance maturity roadmap, the design of a scalable security architecture, a continuous monitoring program, and assessment readiness support. The procurement process included several modifications, such as the addition of a 2 million dollar Professional Liability insurance requirement and extensions to the proposal deadline. Evaluation criteria were weighted toward the technical proposal (40 points), respondent qualifications (30 points), and cost (30 points). However, on October 19, 2026, the University of Arkansas, Fayetteville officially cancelled RFP 09112026 via Addendum 3. This cancellation was prompted by changes in federal guidance that necessitated a reassessment of the procurement scope, with the university intending to issue a new solicitation once requirements are clarified.
University of Arkansas Fayetteville (UAF)

POSTED

about 1 hour ago

DEADLINE

N/A
NAICS: 541512
New
SLED
Case Management System
Solicitation # 26RFI21526
The South Dakota Department of Human Services, Developmental Disability Services, has issued Request for Information 26RFI21526 to gather information on integrated case management and service coordination systems. The objective is to replace legacy paper systems with a state-hosted, comprehensive solution to support a state-run Intermediate Care Facility and two 1915(c) Medicaid Waivers. The desired system must integrate client intake, eligibility, profile management, and service planning, specifically supporting Individual Support Plans and Person-Centered Plans. Key technical requirements include electronic medication administration records, e-prescribing, an interface with MMIS for billing and claims automation, and a centralized incident reporting portal for federal reporting. The system must adhere to strict regulatory and security standards, including CMS and CFR requirements, HIPAA/HITECH encryption for data at rest and in transit, and WCAG accessibility standards. Security features must include multi-factor authentication, single sign-on, and role-based access controls. As this is an RFI for planning purposes, it does not constitute a solicitation for bid. Interested vendors must submit their responses in PDF or Word format to Lesley Farmen by 11:59 pm CST on January 7, 2027, using the specific subject line Case Management 26RFI21526 Submission.
South Dakota State Government

POSTED

about 4 hours ago

DEADLINE

in about 2 months
NAICS: 541512
New
SLED
IFB B600684 ¿ I.T. Infrastructure Monitoring and Observability Platform
Solicitation # B600684
The Metropolitan Atlanta Rapid Transit Authority (MARTA) is soliciting bids under IFB B600684 for an I.T. Infrastructure Monitoring and Observability Platform. The scope of work involves professional services to deploy High Availability (HA) configurations and configure the Server and Application Monitor (SAM) module for MARTA's SolarWinds monitoring platform, alongside a three-year maintenance and support renewal. Technical requirements include the implementation of Microsoft SQL Server Always on Availability Groups or SQL Server Failover Cluster Instances (FCI). To be eligible, contractors must be an active Authorized SolarWinds Value-Added Reseller (VAR) and a SolarWinds Certified Service Partner (CSCP), with personnel holding a SolarWinds Professional Certification or two years of equivalent experience. The contract will be awarded based on price to a responsive and responsible bidder who is technically and financially qualified. Bidders must adhere to strict cybersecurity standards, including the NIST Cybersecurity Framework, NIST Risk Management Framework, and CIS 18 controls, while ensuring the confidentiality, integrity, and availability of MARTA data. Compliance with the Americans with Disabilities Act, Title VI of the Civil Rights Act, and MARTA's Code of Ethics is mandatory. All bids must be submitted electronically by December 7, 2026, and must include required documentation such as the Contractor's Affidavit, No Conflict of Interest certification, and a list of proposed subcontractors.
Metropolitan Atlanta Rapid Transit Authority

POSTED

about 5 hours ago

DEADLINE

in 27 days

AI Contract Overview

Show more

The National Research Council of Canada is seeking a subcontractor for a Manual and Automated Software Tester to support Dynamics and Power Platform solutions. The primary scope of work involves the development of test cases, the execution of both manual and automated testing protocols, regression testing, and diligent defect tracking to ensure system stability and performance. This opportunity was posted on February 27, 2026, with a response deadline of March 10, 2026. The contract falls under NAICS code 541512 and will be performed within Canada for the Government of Canada.

General Info

NRC seeks a subcontractor for manual and automated software testing for Dynamics solutions.

Documents

This scope was carved out of 25-58257.

The full solicitation package (8 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TBIPS SA A.10 Test Coordinator and A.11 Tester

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGovernment of Canada → National Research Council of Canada
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Execute manual and automated testing of Dynamics and Power Platform solutions, including test case development, regression testing, and defect tracking.

More opportunities from Government of Canada → National Research Council of Canada

Same awarding agency

NAICS: 334516
New
International
Benchtop Multiple Reactor Systems
Solicitation # 26-58202
The National Research Council Canada is soliciting proposals under solicitation number 26-58202 for the procurement, delivery, installation, and training of two benchtop multiple reactor systems for the Clean Energy Innovation Research Center. These systems will support the Critical Battery Materials Initiative by providing real-time chemical monitoring of hydrometallurgical and crystallization processes. The first system must feature integrated sampling automation compatible with a self-driving acceleration platform, while the second requires at least 16 reactors with a minimum volume of 0.5 mL and materials compatible with a pH range of 0 to 12. Both systems must support overhead stirring speeds of 1250 RPM or higher, independent temperature controls from -10 to 150 degrees Celsius, and provide a documented SDK or API supporting Python for automation. The procurement is an open tender available to Canadian suppliers and those from applicable trading partners under reciprocal procurement policies. The contract will be awarded to the compliant offer with the lowest evaluated price, provided it meets all mandatory technical criteria and the Canadian Electrical Code Part 1. Deliveries are to be made on a DAP Mississauga Ontario Incoterms 2020 basis, with an expected delivery window of eight weeks from the contract award. Proposals must be submitted in separate technical, financial, and certification volumes by November 24, 2026, at 2:00 PM EST. All packaging must meet environmentally preferable specifications, and the successful contractor must adhere to the NRC Integrity Regime and specific safety protocols during on-site installation at the Mississauga location.
Analytical Laboratory Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details
NAICS: 238140
New
International
Masonry Conservation S-77 Sections A and B
Solicitation # 26-58147
The National Research Council Canada is soliciting bids for masonry conservation services at Building S-77, located at 100 Sussex Drive in Ottawa. The project focuses on restoring the building envelope and preventing further deterioration of the facade, which primarily consists of Wallace sandstone with a Scotstown granite pedestiment. The scope of work includes stone descaling, repointing of the parapet and floors 1 through 3, stone resetting, and conservation of the exterior face of original multi-lite steel casement windows, along with localized repairs to sealant and flashing. The estimated contract value ranges from 500,001 to 2,000,000 dollars. The contract will be awarded to the responsive bidder with the lowest price following a two-step evaluation process consisting of a pass/fail technical review and a subsequent financial evaluation. Bidders must provide a technical submission and a financial submission, including bid security, a list of subcontractors, and certifications for Canadian materials. Awarded contractors are required to provide performance and labour and material payment bonds, as well as proof of insurance. Performance will be monitored based on workmanship, project management, and health and safety standards, with unsatisfactory results potentially leading to the suspension of future bidding privileges. All materials must be handled and stored according to strict quality and weather protection standards, and the contractor is responsible for all transportation costs.
Masonry Contractors

POSTED

2 days ago

DEADLINE

in 29 days
View Details
NAICS: 333517
New
International
Purchase of a Dual Laser Cutter/ Engraver
Solicitation # 26-58199
The National Research Council Canada is soliciting offers for the procurement of a dual-source laser cutter and engraver to support prototyping activities involving the cutting of large plastic sheets and the engraving of plastics and both painted and bare metal parts. The contract requires a system with a material processing bed of at least 900mm x 600mm, a 10.6um CO2 laser of at least 120W, and a 1060-1080nm fibre laser source of at least 50W. Additional mandatory technical specifications include a positional accuracy of 10 micrometers or better, an engraving speed of at least 4000 mm/s, an enclosed and interlocked processing area, a 240V power requirement, and a standalone HEPA/activated carbon air-filtration unit with a flow capacity of at least 850 cubic meters per hour. The system must also include a vision system for fiducial mark alignment with 100um precision and control software provided without a subscription. The solicitation was posted on November 9, 2026, with a response deadline of December 4, 2026. Award selection is based on the lowest evaluated price among compliant offers that meet all mandatory technical criteria. The successful contractor must provide on-site assembly and installation, with all deliverables received by March 31, 2027, delivered DAP Ontario. The contract includes a firm unit price structure and a mandatory two-year warranty on parts and labor. Proposals must be submitted as separate technical and financial electronic attachments not exceeding 10MB, and any inclusion of financial data within the technical offer will result in disqualification.
Machine Tool Manufacturing

POSTED

2 days ago

DEADLINE

in 24 days
View Details
NAICS: 334519
New
International
Purchase of a high-accuracy portable coordinate measuring machine (CMM) or an articulated metrology arm
Solicitation # 26-58193
The National Research Council Canada is soliciting offers for the procurement of a high-accuracy 2.5 meter portable coordinate measuring machine (CMM) or articulated metrology arm. The equipment will be utilized for quality control, verification, and alignment of radio telescope antenna panels and various other machined parts. Key technical requirements include an accuracy of 0.025 mm or less, compatibility with BuildIT metrology software, and a hardware package for connection with FARO or Leica trackers. The system must support both 110V AC and battery power, and the contract includes a minimum two-year warranty on parts and labor, as well as on-site English training for four personnel. The solicitation, numbered 26-58193, was posted on November 9, 2026, with a response deadline of December 4, 2026. This is an open tendering procedure restricted to Canadian suppliers, with the contract award based on the lowest evaluated price among compliant bids. Successful delivery must be made Delivered At Place (DAP) British Columbia by March 31, 2027, with a required lead time of 60 calendar days from the award date. Proposals must be submitted as two separate electronic attachments—a technical offer and a financial offer—to avoid disqualification, and all packaging must meet environmentally preferable specifications.
Other Measuring and Controlling Device Manufacturing

POSTED

2 days ago

DEADLINE

in 24 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS