Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Manufacture and Supply of Solenoid Subassemblies with Mercury Components

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, issued by the Defense Logistics Agency under the Department of Defense, involves the manufacture and supply of 39 solenoid subassemblies identified by NSN 5945015376186. Due to the inclusion of mercury switches within these components, the contractor must strictly adhere to all applicable military standards and regulations regarding the handling, packaging, and transport of hazardous materials. The procurement falls under NAICS code 334416 and is managed through the DIBBS system. The primary objective is the successful delivery of these specialized subassemblies while ensuring full compliance with safety and technical specifications required for defense applications.

General Info

DLA subcontract for 39 solenoid subassemblies requiring hazardous material handling and military compliance.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

334416 - Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE7M5-26-V-4752.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SOLENOID SUBASSEMBL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJun 24

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procurement and delivery of 39 solenoid subassemblies (NSN: 5945015376186) containing mercury switches, requiring compliance with hazardous material handling, packaging, and military standards.

Similar Contracts

Same NAICS industry code

Distribution Capacitor Banks Contract

Solicitation # AF-2027-11

The City of Seguin is soliciting bids under solicitation number AF-2027-11 to establish an annual contract for the furnishing and delivery of complete pole-mounted distribution capacitor banks rated at 300 kVAR, 600 kVAR, and 900 kVAR. These units must include SEL-734B controllers, UltraVac15-110 solenoid-operated switches or approved equivalents, control power transformers, mounting racks, and associated components, though sensors and reactors are specifically excluded. The materials are intended to support the operation, maintenance, and expansion of the city's electric distribution system and will be purchased on an as-needed basis. Field installation is not included in this supply bid. The initial contract period is set for January 2027 through December 2027, with options to renew for up to three additional one-year terms. Deliveries are to be made FOB Destination to the Utility Operations Center in Seguin, Texas, within five calendar days of the vendor's estimated lead time. The city will award the contract based on best value, evaluating bids using a weighted criteria consisting of total extended price (50%), technical compliance (25%), delivery lead time (10%), vendor experience (10%), and warranty terms (5%). Bidders must provide a Certificate of Authority to Submit Proposal, a disclosure of interested parties via Form 1295, and certification that they do not boycott Israel. Payment terms are Net 30 days following the receipt and acceptance of equipment or an accurate invoice. The contractor is responsible for all packaging, transportation, and unloading costs, and must ensure all goods conform to OSHA safety standards.

POSTED

about 13 hours ago

DEADLINE

Fixed, Wire-Wound, Inductive Resistor SupplierThis subcontract involves the manufacture or sourcing of five fixed, wire-wound, inductive resistors under NSN 5905010618047 for the Department of Defense, specifically supporting DLA Weapons Support Maritime Supply Chain projects. The work is performed at Hill AFB and falls under NAICS code 334416. The supplier must ensure strict adherence to technical and quality standards, including lead finish marking per IPC/JEDEC J-STD-609 and quality sampling according to MIL-STD-1916 or ASQ H1331. Additionally, all deliverables must comply with MIL-DTL-39032, MIL-STD-2073-1E, and MIL-STD-129 requirements for packaging and marking.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 23 hours ago

DEADLINE

Supplier of Fixed Wire Wound Resistors (NSN 5905-01-061-9537)This subcontract involves the supply of five fixed wire wound resistors, specifically NSN 5905-01-061-9537, for prime contractors supporting DLA Weapons Support Maritime Supply Chain projects. The selected supplier is responsible for manufacturing or sourcing resistors that adhere to the DLA Master List RA001, with lead finish markings meeting IPC/JEDEC J-STD-609 standards. All provided materials must strictly comply with the Buy American Act and the Berry Amendment. The contract is managed by the Department of Defense under NAICS code 334416, with final delivery designated for Hill AFB in Utah. Interested parties must submit their responses by November 9, 2026, to meet the requirements of the DLA Weapons Support Maritime Supply Chain ESOC Buys.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 23 hours ago

DEADLINE

Supply of Fixed Electrolytic Capacitors (NSN 5910-00-944-2051)This subcontract through the Department of Defense involves the supply of two fixed electrolytic capacitors for the DLA Weapons Support Maritime Supply Chain. The required components must be part number CE13C240Q and strictly comply with MIL-PRF-62G and MIL-PRF-62/2E standards. Additionally, the materials must be free of mercury and ozone-depleting substances. The contractor is responsible for applying lead finish markings according to IPC/JEDEC J-STD-609 and ensuring packaging meets MIL-STD-2073-1E and MIL-STD-129 specifications. The final deliverables are to be shipped to Norfolk, Virginia. The response deadline for this opportunity is November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 23 hours ago

DEADLINE

Supplier of Fixed Electrolytic Capacitors (NSN 5910010971721)This subcontract involves the manufacture or procurement of fixed electrolytic capacitors under NSN 59100109721 for the Department of Defense, specifically supporting DLA Weapons Support Maritime Supply Chain projects. The contractor is responsible for ensuring that all units adhere to IPC/JEDEC J-STD-609 for lead finish markings and MIL-STD-129 for general marking. A total of three units must be packaged according to MIL-STD-2073-1E and delivered to the F A 18 Wholesale Storage Site in Lemoore, California. To be eligible, the supplier must maintain CMMC Level 2 Self-Assessment certification and ensure full compliance with the Buy American Act. The opportunity falls under NAICS code 334416, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 23 hours ago

DEADLINE

Fixed Plastic Dielectric Capacitor SupplierThis subcontract involves the supply of 10 fixed plastic dielectric capacitors for prime contractors supporting the DLA Weapons Support Active Devices Division. The selected provider is responsible for manufacturing or sourcing capacitors under NSN 5910-00-966-4564, ensuring that all lead finish marking complies with IPC/JEDEC J-STD-609 standards. The contractor must utilize manufacturing equipment that meets DLA technical standards and strictly adhere to the Buy American Act requirements. This procurement falls under NAICS code 334416 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 23 hours ago

DEADLINE

Fixed Wire Wound Resistor SupplyThis subcontract involves the supply of five fixed wire wound resistors, specifically NSN 5905-01-062-5696, for prime contractors supporting DLA Weapons Support Maritime Supply Chain projects. The contractor is responsible for manufacturing or sourcing the components, ensuring that lead finish markings strictly comply with IPC/JEDEC J-STD-609. All deliverables must be shipped FOB Origin to Hill AFB, Utah. The agreement mandates strict adherence to the Buy American Act and the DLA Master List of Technical and Quality Requirements RA001. Notably, the use of additive manufacturing is prohibited for this requirement. The project falls under NAICS code 334416 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 23 hours ago

DEADLINE

Supply of Fixed Wire Wound Resistors (NSN 5905010615785)This subcontract involves the procurement of five fixed wire wound resistors for the Department of Defense, specifically supporting DLA Weapons Support Maritime Supply Chain projects. The contractor is responsible for sourcing or manufacturing components that meet NSN 5905010615785 specifications and ensuring that component lead finish markings comply with IPC/JEDEC J-STD-609 standards. The agreement requires strict adherence to the Buy American and Balance of Payments Program requirements. Final delivery of the resistors is to be made to Hill AFB in Utah. The project falls under NAICS code 334416 and is managed by the DLA Weapons Support Maritime Supply Chain ESOC Buys.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 23 hours ago

DEADLINE

Supply of Fixed Film Resistors (NSN 5905012981026)This subcontract involves the supply of 10 fixed film resistors, identified by NSN 5905012981026, for the Department of Defense under the DLA Weapons Support Active Devices Division. The resistors must match Raytheon part number 11455880-141 and adhere strictly to MIL-DTL-39032 specifications. Additional technical requirements include lead finish marking according to IPC/JEDEC J-STD-609 and packaging standards compliant with MIL-STD-2073-1E and MIL-STD-129. The contract is categorized under NAICS code 334416 and requires full compliance with the Buy American Act. Performance for this requirement is centered in Marshall, Texas. Interested parties must submit their responses by the deadline of November 9, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 23 hours ago

DEADLINE

Fixed Film Resistor Supplier (MIL-PRF-55182)This subcontract involves the supply of 115 fixed film resistors under NSN 5905001407022 for the Department of Defense DLA Weapons Support Nuclear Reactor Program. The contractor is responsible for manufacturing components in strict accordance with MIL-PRF-55182/5N(1) and MIL-PRF-55182K(1) SUP 1 specifications, ensuring that lead-finish identification markings comply with IPC/JEDEC J-STD-609. Operational compliance requires adherence to quality sampling plans MIL-STD-1916 or ASQ H1331, as well as DFARS cybersecurity reporting standards. The performance of this contract is centered in Cherry Point, and the response deadline for the solicitation is November 9, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 23 hours ago

DEADLINE

Fixed Wire Wound Resistor SupplierThis subcontract involves the supply of specialized fixed wire wound resistors for prime contractors supporting the Department of Defense DLA Weapons Support Active Devices Division. The scope of work requires the manufacture or sourcing of two units of resistors identified by NSN 5905-01-457-8024 and Part Number RER40F16R2R. All components must adhere to MIL-PRF-39009/2C(3) and MIL-PRF-39009E(5) specifications, with lead finish marking applied according to IPC/JEDEC J-STD-609 standards. The project falls under NAICS code 334416 and will be performed at Fort Bragg, zip code 28310-0000. The solicitation was posted on October 28, 2026, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 23 hours ago

DEADLINE

Fixed Wire-Wound Inductive Resistor SupplierThis subcontract involves the procurement of one fixed, wire-wound inductive resistor for the Department of Defense, specifically supporting the DLA Weapons Support Active Devices Division. The supplier is responsible for manufacturing or sourcing part number RER75F6041R, identified by NSN 5905-00-506-6388, ensuring the component adheres to MIL-PRF-39009/1D and MIL-PRF-39009E standards. Additionally, the contractor must perform lead finish identification according to IPC/JEDEC J-STD-609. The contract requires strict adherence to the Buy American Act and NIST SP 800-171 security standards. Classified under NAICS code 334416, the project culminates in the delivery of a single military-grade resistor to a performance location in FPO 96672. The response deadline for this requirement is November 9, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 23 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Cafeteria & Food Truck Concession Services – Tracy, CA

Solicitation # NAFUA1-26-R-0003

The Defense Logistics Agency is soliciting proposals under solicitation NAFUA1-26-R-0003 for cafeteria and mobile food truck services at the Defense Distribution Depot San Joaquin in Tracy, California. This is a revenue-generating concessionaire contract where the contractor provides all labor, management, and equipment to operate two cafeterias in Building 100 and Building 16, a mobile food truck, and general catering services for over 1,200 personnel. In exchange for operating these facilities, the contractor will pay the Nonappropriated Fund Instrumentality either a monthly concessionaire fee or a percentage of gross sales, whichever is greater. The period of performance consists of a two-year base period from December 30, 2026, to December 29, 2028, with eight subsequent one-year option periods. Proposals are due by November 2, 2026, at 3:00 PM EST and must be submitted in two separate volumes covering commission percentages, financial capabilities, and operational plans. Award selection is based on the best overall value, with primary emphasis placed on the feasibility of the business plan, relevant past performance, and menu innovation. Contractors must adhere to strict food safety and packaging standards, including compliance with Tri-Service Food Code and Army Regulations, and ensure all food handlers are inoculated against Hepatitis A. Eligible offerors must maintain active registration in the System for Award Management and provide a unique entity identifier.

Food Service Contractors

POSTED

about 4 hours ago

DEADLINE

MIL-STD Packaging and Logistics ServicesThis subcontract for MIL-STD Packaging and Logistics Services supports prime contractors fulfilling Defense Logistics Agency supply contracts. The scope of work involves providing specialized military-grade packaging and palletization services, ensuring all items are processed according to MIL-STD-129, RP001, and ASTM D3951 standards. The provider must utilize compliant labeling and industrial equipment to deliver shipments that are fully prepared for FOB Origin transport. The project is managed under NAICS code 561910 for the Department of Defense and will be performed in Phoenix, Arizona. Interested parties should note the response deadline of November 9, 2026, for this specific logistics requirement.

Packaging and Labeling Services

POSTED

about 23 hours ago

DEADLINE

Safety Cone Supplier (NSN 6250-00-334-6183)This subcontract involves the procurement of 589 safety cones to support prime contractors fulfilling Defense Logistics Agency supply contracts. The supplier is responsible for manufacturing or sourcing cones identified by NSN 6250-00-334-6183, ensuring all materials strictly adhere to the DLA Master List of Technical/Quality requirements and comply with the Buy American Act. The completed order of 589 safety cones must be delivered FOB Origin to Phoenix, Arizona. This requirement falls under NAICS code 339999 and is managed by the Department of Defense for the Defense Logistics Agency.

All Other Miscellaneous Manufacturing

POSTED

about 23 hours ago

DEADLINE

Identification Marker SupplierThis subcontract involves the supply of seven identification markers, NSN 7690-01-693-4155, for prime contractors supporting Defense Logistics Agency Troop Support contracts. The selected supplier is responsible for the fabrication and assembly of these markers in strict accordance with TDP Rev A Gen 1 and REFERENCE QAP 13873. Compliance with military standards is mandatory, specifically MIL-STD-129 for marking and MIL-STD-2073-1E along with RP001 DLA Packaging Requirements for packaging. Additionally, the provider must provide valid manufacturer and distributor codes to fulfill the requirements of this Department of Defense procurement.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supply of Toggle Switches (NSN 5930-00-655-1507)This subcontract involves the supply of 11 toggle switches for prime contractors supporting Defense Logistics Agency contracts. The switches must strictly adhere to NSN 5930-00-655-1507 specifications, with a specific prohibition against the use of additive manufacturing. All items must be delivered FOB Destination and must comply with packaging and marking standards established by MIL-DTL-28786, MIL-STD-129, and RP001. The contractor is required to maintain rigorous cybersecurity and data protection standards, specifically ensuring compliance with NIST SP 800-171 and DFARS 252.204-7012. This procurement falls under NAICS code 334419 and is managed through the Department of Defense.

Other Electronic Component Manufacturing

POSTED

about 23 hours ago

DEADLINE

Domestic Electrical Component Supply (Berry Amendment Compliant)This subcontract involves the supply of raw wire, connectors, shielding, and housing for prime contractors working on Defense Logistics Agency procurement projects specifically for NSN 5995-01-696-1261. The provider is responsible for sourcing electrical grade materials that meet strict technical requirements and must include a Certificate of Conformance with all delivered components. A critical requirement of this agreement is the provision of certification of origin to ensure full compliance with the Buy American Act and the Berry Amendment. Managed under NAICS code 335131 for the Department of Defense, the contract ensures that all domestic electrical components meet the necessary federal standards for military application.

Residential Electric Lighting Fixture Manufacturing

POSTED

about 23 hours ago

DEADLINE

Special Purpose Electrical Cable Assembly FabricationThis subcontract involves the fabrication and assembly of a special purpose electrical cable assembly, specifically NSN 5995-01-696-1261, for prime contractors working on Defense Logistics Agency procurement projects. The manufacturer is required to produce one completed, tested, and packaged assembly in strict accordance with the DLA Master List of Technical and Quality Requirements (RA001), with a specific prohibition against the use of additive manufacturing. All deliverables must be packaged and marked according to MIL-STD-129 and MIL-STD-2073-1E standards. This opportunity falls under NAICS code 335931 and is managed by the Department of Defense. Interested parties must respond by November 5, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supplier of Flat Washers (NSN 5310-01-097-9936)This subcontract involves the procurement of 109 specialized flat washers to support Defense Logistics Agency aircraft component projects. The supplier is responsible for manufacturing or sourcing the components in strict accordance with Sikorsky Aircraft Corporation part number SS5104-01 and NSN 5310-01-097-9936. All items must be delivered to DLA Distribution DDSP New Cumberland. The contract mandates rigorous adherence to quality and regulatory standards, including compliance with the Buy American Act and the Berry Amendment. Packaging must meet ASTM D3951 specifications, while marking and palletization must follow MIL-STD-129 and RP001 guidelines. The opportunity falls under NAICS code 332722 and is managed by the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 23 hours ago

DEADLINE

Military-Spec Packaging and International Shipping (Guam)This subcontract through the Defense Logistics Agency involves specialized military packaging, marking, and international transportation services for prime contractors delivering supplies to Guam. The scope of work specifically requires the packaging of mufflers in accordance with ASTM D3951, marking per MIL-STD-129, and palletization following RP001 requirements. The selected provider must utilize the fastest traceable shipping methods to ensure delivery to the MESG One Detachment in Guam. This opportunity falls under NAICS code 488330 and is managed by the Department of Defense.

Navigational Services to Shipping

POSTED

about 23 hours ago

DEADLINE

Exhaust Muffler Supply (NSN 2990-01-566-4579)This subcontract involves the manufacture or procurement of one specialized exhaust muffler, identified by NSN 2990-01-566-4579, to support prime contractors fulfilling Defense Logistics Agency supply contracts. The provider must ensure the product complies with DLA Master List of Technical and Quality Requirements RA001 and RQ011, while maintaining strict supply chain traceability documentation as specified in the contract terms. Managed under NAICS code 336390 for the Department of Defense, the agreement requires the delivery of a single completed unit. The solicitation was posted on October 28, 2026, with a response deadline set for November 4, 2026.

Other Motor Vehicle Parts Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supply of Enamel (NSN 8010-00-297-0554)This subcontract involves the supply of 5,000 gallons of enamel paint to prime contractors supporting Defense Logistics Agency Troop Support contracts. The material must strictly adhere to NSN 8010002970554 and UFGS-09900 Division 09 specifications, while remaining compliant with the DLA Master List of Technical and Quality Requirements. Delivery is designated as FOB Destination, with the place of performance located at Hunter AAF. The contractor is responsible for ensuring all packaging and labeling meet MIL-STD-129 and MIL-STD-2073-1E standards, specifically including the provision of lot and batch numbers. This procurement falls under NAICS code 325510 and is managed by the Department of Defense. The response deadline for this requirement is November 3, 2026.

Paint and Coating Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supply of Sleeve Spacers (NSN 5365-01-566-4847)This subcontract involves the manufacture or sourcing of four sleeve spacer units, identified by NSN 5365-01-566-4847, to support prime contractors under a Defense Logistics Agency supply contract. The selected provider must ensure all materials comply with the Buy American Act and the Berry Amendment. Final delivery of the units is required at Fort Bragg, North Carolina. Strict adherence to technical specifications is mandatory, including packaging according to ASTM D3951, labeling per MIL-STD-129, and palletization following RP001 standards. The opportunity falls under NAICS code 332721 and is managed through the Department of Defense.

Precision Turned Product Manufacturing

POSTED

about 23 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Fixed Composition Resistor Supply

Defense Logistics Agency

POSTED

DEADLINE

Precision Capacitor Manufacturing – Paper Dielectric

Defense Logistics Agency

POSTED

DEADLINE

Fixed Capacitor Supply (Electronic Components)

Defense Logistics Agency

POSTED

DEADLINE

Power Transformer Manufacturing and Supply

Defense Logistics Agency

POSTED

DEADLINE

Electrical Coil Manufacturing and Supply

Defense Logistics Agency

POSTED

DEADLINE

Fiber Optic Connector Assembly Supply

Defense Logistics Agency

POSTED

DEADLINE

Supply of Electronic Amplifier Units (Intermediary Grade)

Defense Logistics Agency

POSTED

DEADLINE

Resistor Assembly Manufacturing and Delivery

Defense Logistics Agency

POSTED

DEADLINE

Thermal Resistor Supply (Electronic Components Manufacturing)

Defense Logistics Agency

POSTED

DEADLINE

CAPACITOR, FIXED, ELE

Solicitation # SPE7M5-26-T-234G

Defense Logistics Agency

POSTED

DEADLINE

AMPLIFIER, INTERMEDI

Solicitation # SPE7M5-26-T-079Q

Defense Logistics Agency

POSTED

DEADLINE

RESISTOR, FIXED, WIRE

Solicitation # SPE7M5-26-T-280K

ACTIVE DEVICES DIVISION

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS