Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Manufacturer of Instant Heat Treatment Pads

Active

Federal

Response Deadline10/05/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture of large-size, single-use instant heat treatment pads for prime contractors supporting the Department of Defense Medical Supply Chain. The produced packs must reach a temperature of 112 degrees Fahrenheit when activated at 75 degrees Fahrenheit and maintain a shelf life of 24 months in accordance with RS016 requirements. The manufacturer must ensure full compliance with Good Manufacturing Practices and Regulation 890.571 Class I registration. Finished products are to be delivered in cases of 24 units, with performance taking place at Fort Bragg. The solicitation is open for responses until October 5, 2026.

General Info

Manufacture single-use heat pads for DoD Medical Supply Chain, delivered to Fort Bragg.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

NAICS

325120 - Industrial Gas Manufacturing

Place of Performance

FORT BRAGG, NC, 28310, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE2DH-26-T-7085.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PAD, HEAT TREATMENT

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 27

subcontract

Response DeadlineOct 5

Submission deadline

Response Deadline

10/05/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures single-use, large-size instant heat packs for prime contractors on DLA Medical Supply Chain projects. Produces packs that achieve 112°F (44°C) when activated at 75°F, adhering to RS016 shelf-life requirements of 24 months. Ensures compliance with GMPs and Regulation 890.571 Class I registration. Delivers finished instant heat packs packaged in cases of 24.

Similar Contracts

Same NAICS industry code

6835--VISN 2 Prosthetics Downstate Home Oxygen Services

Solicitation # 36C24226R0081

Solicitation 36C24226R0081 is a request for proposals from the Department of Veterans Affairs for Home Oxygen Services to support beneficiaries within the VISN 2 Downstate New York Healthcare Network, covering the Bronx, Hudson Valley, New Jersey, New York Harbor, and Northport areas. This Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside contract involves the rental and provision of oxygen concentrators, liquid oxygen systems, and ventilators. The performance period is structured with a base pricing period from January 1, 2027, through December 31, 2027, and five subsequent pricing periods extending through June 30, 2032. The total contract value is estimated between 100,000 and 40 million dollars. The contractor is required to meet Joint Commission standards or equivalent national accreditation and must implement a full transition of all home oxygen patients within 180 calendar days of the award. Performance is monitored through a Quality Assurance Surveillance Plan (QASP) that evaluates timely set-ups, respiratory therapist visits, beneficiary education, and customer satisfaction. Award decisions are based on a best-value determination where non-price factors, specifically technical capability and past performance, are significantly more important than cost. Technical evaluations focus on quality, management, staffing, and the ability to execute a seamless transition. Proposals must include a technical proposal, a redacted technical proposal, and a price proposal, with specific certifications required for the Immigration and Nationality Act and E-Verify compliance.

242-NETWORK Contract Office 02 (36C242)

POSTED

DEADLINE

in about 1 month

Calibrating Gas Mixture (Isobutylene) SupplierThis subcontract opportunity is for the supply of specialized calibrating gas mixtures to support prime contractors on DLA ASC Commodities Division projects. The requirement specifically calls for Isobutylene 100 PPM, Balance Air, delivered in 34-liter high-pressure cylinders at 494 PSIG. Due to the nature of these Critical Application Items, the supplier must maintain strict adherence to purity and concentration standards and comply with all Department of Defense shipping and labeling regulations for pressurized gases. The contract is designated as a Total Small Business Set-Aside under NAICS code 325120 and is managed by the Department of Defense. Performance will take place in Norfolk, Virginia. Interested parties must submit their responses by October 2, 2026, following the posting date of September 24, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

CALIBRATING GAS MIXTUR

Solicitation # SPE4A6-26-T-36LZ

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # W912NW26QA049

Solicitation W912NW26QA049 is a total small business set-aside for the procurement of dry ice to support the Corpus Christi Army Depot in Texas. The contractor is required to provide dry ice in three forms: 60 lb blocks/cubes, 60 lb slabs, and 33 lb pellet bundles. The primary requirement consists of 340,080 lbs of blocks delivered twice weekly to 12 depot-wide locations, 18,720 lbs of slabs delivered twice weekly to the T700 Engines location, and 3,432 lbs of pellets delivered once weekly to the Rotating Electric location. The base period of performance runs from December 3, 2026, to December 2, 2027, with an option period extending to December 2, 2028. The contract is awarded based on the lowest price among responsible offerors. Key operational requirements include the provision of delivery containers for specific sites, adherence to strict safety standards including OSHA and Army Regulation 385-10, and the submission of a Safety Data Sheet for solid carbon dioxide prior to the first delivery. Because the work is performed on a military installation, contractor personnel must comply with comprehensive security requirements, including criminal history checks, DBIDS registration, and the use of government-issued identification. Invoicing is processed electronically through the Wide Area WorkFlow system. Notably, amendment 0001 removed the CMMC cybersecurity requirements, and amendment 0002 reduced the annual quantity of dry ice blocks from 390,000 lbs to 340,080 lbs.

W6QK Ccad Contr Office

POSTED

DEADLINE

Cylinder & Oxygen Tank Rentals for DVA

Solicitation # 3000026709

The State of Louisiana Office of State Procurement has issued solicitation 3000026709 for a blanket order contract to provide cylinder and oxygen tank rentals and refills for the Department of Veterans Affairs Northeast LA War Veterans Home in Monroe, Louisiana. The scope of work includes the provision of liquid oxygen, GP-55 cylinders, and monthly rentals and refills for E and H cylinders. The contractor is required to perform weekly deliveries on a day agreed upon by the agency and the vendor. The contract will be awarded on an all-or-none basis to the lowest responsive and responsible bidder. The initial period of performance begins on the date of award and ends on June 30, 2027, with the possibility of two additional 12-month renewals, not to exceed a total term of 36 months. Bids are due by October 20, 2026, and must be submitted via the LaGov Vendor portal or in a sealed envelope. All pricing must be quoted as F.O.B. Destination and inclusive of freight charges. Bidders must comply with various state and federal regulations, including Louisiana Secretary of State registration, the Anti-Kickback Act, and the Clean Air Act. Payments will be processed electronically via the LaCarte procurement card or Electronic Funds Transfer.

POSTED

DEADLINE

Specialized Lubricant/Oil SupplierThis subcontract opportunity with the Department of Defense Fluid Handling Division seeks a supplier to provide specialized lubricating oil for prime contractors. The selected provider will be responsible for sourcing, bottling, and delivering the specific grade of oil required for end-items, ensuring all products meet strict government specifications and certifications. The contractor must possess hazardous material handling capabilities and maintain full compliance with FAR 52.223-23 regarding sustainable products. This requirement falls under NAICS code 325120, with a response deadline set for October 5, 2026.

FLUID HANDLING DIVISION

POSTED

DEADLINE

JPMC Medical and Laboratory Gases

Solicitation # 27-416CMS-BOSS4-B-52903

BOSS41610 - Strategic Sourcing

POSTED

DEADLINE

Bulk Liquid Oxygen (LOX) Supply and LogisticsThis subcontract involves the supply and delivery of bulk Liquid Oxygen (LOX) for prime contractors working on USACE Nashville District projects at Wolf Creek Dam. The contractor is responsible for dispatching 23-ton cryogenic tankers across five seasonal phases to maintain four 15,000-gallon storage tanks, utilizing telemetry monitoring equipment to ensure required tank levels are met. All delivered LOX must adhere to CGA G-4.3 specifications with a minimum purity of 99.5 percent, and the provider must supply batch Certificates of Analysis. This operation falls under NAICS code 325120 and is managed by the Department of Defense under the W072 Endist Nashville agency.

W072 Endist Nashville

POSTED

DEADLINE

Propane Delivery and Tank Rental for Howard Hanson Dam and Mud Mountain Dam in Washington State

Solicitation # W912DW26QA073

Solicitation W912DW26QA073 is a total small business set-aside under NAICS 325120 for a non-personal services contract to provide propane delivery and tank leasing for the Howard Hanson Dam in Ravensdale, Washington, and the Mud Mountain Dam in Enumclaw, Washington. The contract structure consists of one base year starting September 28, 2026, with four optional one-year extensions. The scope of work includes automatic and on-call propane deliveries, with specific seasonal schedules requiring bi-weekly deliveries from October through March and monthly or on-call deliveries during the remainder of the year. Additionally, the contractor must lease four tanks at the Mud Mountain Dam, consisting of three 500-gallon tanks and one 250-gallon tank, ensuring compatibility with existing nozzles. Award will be granted to the lowest priced, responsible vendor. Offerors must be registered in the System for Award Management and submit a business license and a complete price schedule by the deadline of October 6, 2026. Performance is subject to the USACE Safety and Health Requirements Manual EM 385-1-1 and requires strict adherence to site access protocols, including the use of CB radios for deliveries to Howard Hanson Dam. Quality assurance is managed through a Quality Assurance Surveillance Plan, which mandates zero missed automatic deliveries and a 95 percent success rate for on-call deliveries within 48 hours. Invoicing is processed electronically via the Wide Area WorkFlow system.

W071 Endist Seattle

POSTED

DEADLINE

Wolf Creek Seasonal Supply of Liquid Oxygen

Solicitation # W912P526QA054

Solicitation W912P526QA054, issued by the USACE Nashville District, seeks a contractor to provide the seasonal supply and delivery of bulk Liquid Oxygen (LOX) to the cryogenic facility at Wolf Creek Dam in Jamestown, Kentucky. The contract period extends through December 31, 2026, with the operational dissolved oxygen season estimated to run through November 30, 2026. The base requirement consists of 2,000 short tons of LOX, with two optional line items for an additional 1,000 short tons each and a third option for warm fill inspection and purging services. The total estimated demand is 4,000 tons, requiring the contractor to scale deliveries across five seasonal phases, including a start-up phase with daily averages between 23 and 46 tons. The LOX must maintain a purity of at least 99.5% and comply with Compressed Gas Association (CGA) G-4.3 specifications. The contractor is solely responsible for all safety, equipment, and structural inspections during transport and delivery to the four 15,000-gallon storage tanks. Award will be granted to the offeror who demonstrates full compliance with technical specifications, acceptable past performance, and the lowest evaluated price, with a 10 percent price preference applied to HUBZone small businesses. Quotes are due by October 7, 2026, and must include a completed price schedule, SAM registration, and evidence of the capacity to handle bulk industrial-gas deliveries.

W072 Endist Nashville

POSTED

DEADLINE

Acetylene Gas SupplierThis subcontract through the Department of Defense ASC Supplier Oper OEM Division involves the supply of 2,000 cubic yards of Acetylene gas, identified by NSN 6830017193841, for prime contractors supporting DLA Aviation supply contracts. The gas must be delivered FOB Destination to Mansfield, Ohio. The supplier is required to adhere to strict packaging and marking standards, specifically MIL-STD-2073-1E, MIL-STD-147 Palletized Load Type IX, and MIL-STD-129. Additionally, the contract mandates compliance with FAR 52.223-3 and requires Safety Data Sheets that meet 29 CFR 1910.1200(g) regulations.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Propane Gas Material SupplyThis subcontract opportunity is for the supply of bulk propane gas to support prime contractors working on US Army installation projects at Fort Leonard Wood and LORA. The provided gas must meet or exceed GPA Standard 2140-97 to ensure compatibility with government-owned tanks, with delivery required to the designated transport vehicle or distribution point. Managed by the Department of Defense under the W6QM Micc-Ft Leonard Wood agency, this project is designated as a total Small Business Set Aside under NAICS code 325120. The place of performance is located in Fort Leonard Wood, Missouri, with a response deadline set for October 30, 2026.

W6QM Micc-Ft Leonard Wood

POSTED

DEADLINE

in about 1 month

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

Supply of Hand Therapy PuttyThis subcontract involves the supply of six units of medical-grade hand therapy putty for prime contractors supporting Medical Supply Chain FSH projects under the Department of Defense. The required materials consist of one pound units of green, medium density therapeutic putty, each packaged in plastic cases with attached covers. The agreement mandates strict adherence to FAR 52.222-50 standards and prohibits the use of additive manufacturing for production unless specific authorization is granted. This procurement falls under NAICS code 423450 and was posted on September 28, 2026, with a response deadline of October 5, 2026.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 13 hours ago

DEADLINE

Swimming Pool Water Test Strip SupplierThis subcontract under the Department of Defense for the Medical Supply Chain FSH involves the procurement of specialized chemical test strips, specifically Aqua Chem 6-Way Test Strips or an equivalent product. The supplier is responsible for providing strips that measure Chlorine, Bromine, pH, and Total Alkaline, with each strip measuring 3 inches by 0.25 inch. Packaging requirements specify 50 strips per bottle and 12 bottles per package, all contained in sealed units according to MIL-STD-2073-1E standards. The contractor must provide Safety Data Sheets for any hazardous materials involved in the supply. This opportunity falls under NAICS code 325192 and is designated for performance in Morrisville, North Carolina. The response deadline for this solicitation is October 5, 2026.

Cyclic Crude and Intermediate Manufacturing

POSTED

about 13 hours ago

DEADLINE

Supplier of Hyperthermia Cooling Blankets (NSN 6532-01-653-6054)This subcontract with the Department of Defense Medical Supply Chain FSH involves the supply of five specialized hyperthermia cooling blankets, identified by NSN 6532-01-653-6054. The supplier must ensure all end items meet the required technical specifications and adhere to MIL-STD-129 marking and labeling standards for packaging and traceable shipping. The contract falls under NAICS code 423450 and is intended for prime contractors delivering DLA supply contracts. Performance for this requirement is located in Saint Louis, Missouri, with a response deadline set for October 5, 2026.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 13 hours ago

DEADLINE

Surgical Instrument Sterilization Basket SupplierThis subcontract involves the manufacture and supply of rigid, mini-size perforated sterilization baskets for prime contractors supporting DLA Troop Support Medical Supply Chain projects. The baskets must be constructed from Corrosion Resistant Steel, measuring 9 by 5 by 1.75 inches, and feature changeable handle positions to facilitate proper steam penetration. The supplier is required to deliver two sterilization baskets under NSN 6530014212971. Compliance is mandatory with FDA Regulation 880.6850 Class II and Medical Marking Standard No. 1, and the provider must complete an FDA 510(k) submission. This opportunity is managed by the Department of Defense Medical Supply Chain under NAICS code 339112.

Surgical and Medical Instrument Manufacturing

POSTED

about 13 hours ago

DEADLINE

Medical Device Packaging and Export ShippingThis subcontract involves providing specialized packaging and export shipping services for medical equipment on behalf of prime contractors supporting DLA Troop Support. The scope of work includes sealing units in protective containers and utilizing export-grade commercial exterior shipping containers for delivery to Baumholder, Germany. All shipments must be delivered FOB Destination. Compliance requirements include applying markings according to Medical Marking Standard No. 1 and ensuring all hazardous materials are labeled in accordance with 29 CFR 1910.1200. This opportunity is managed by the Department of Defense under the Medical Supply Chain FSH, with a response deadline of October 5, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 13 hours ago

DEADLINE

Radiographic Film Cassette Holder SupplierThis subcontract involves the supply of light-weight radiographic film cassette holders to prime contractors supporting DLA Troop Support medical supply contracts. The manufacturer provides devices designed for 8 by 10 and 10 by 12 inch cassettes, featuring a 36 inch shaft with a quick-release clamp and a design that allows for easy breakdown during storage. The contract requires strict compliance with Medical Marking Standard No. 1 and DFARS 252.204-7012. Managed by the Department of Defense under the Medical Supply Chain FSH, the scope of work entails the delivery of one complete Radiographic Film Cassette Holder under NAICS code 339113.

Surgical Appliance and Supplies Manufacturing

POSTED

about 13 hours ago

DEADLINE

Supply of Tubular Locks and Industrial HandlesThis subcontract with the Department of Defense for the Medical Supply Chain FSH involves the procurement of specialized security hardware used in the assembly of narcotic boxes. The supplier is responsible for sourcing and delivering bulk quantities of stainless steel hinges, aluminum top handles, and tubular locks, with each lock requiring two keys to support double-lock configurations. A critical requirement of this agreement is that all provided hardware must adhere to domestic origin standards. The contract falls under NAICS code 332510 and is specifically designed to support prime contractors operating on Medical Supply Chain FSH projects.

Hardware Manufacturing

POSTED

about 13 hours ago

DEADLINE

Fabrication and Assembly of Double-Lock Narcotic BoxesThis subcontract involves the fabrication and assembly of double-lock narcotic control boxes for prime contractors supporting Medical Supply Chain FSH projects under the Department of Defense. The required units are steel enclosures measuring 10 by 7 by 7 inches, featuring stainless steel door hinges, aluminum top handles, and a double-lock security system utilizing tubular locks. Each completed box must weigh approximately 5 lbs. All materials used in the construction of these boxes must be of domestic origin. The contract requires the delivery of finished products that strictly adhere to the specified dimensions and material requirements. Interested parties must respond by October 5, 2026.

Sheet Metal Work Manufacturing

POSTED

about 13 hours ago

DEADLINE

Supply of Surgical Sponge BowlsThis subcontract involves the procurement and supply of FDA-regulated surgical sponge bowls to support prime contractors for the Department of Defense Medical Supply Chain. The required items must match the specifications for MEDEGEN MEDICAL PRODUCTS, LLC part number 00050, identified by NSN 6530-00-404-2654. The total order consists of 2,000 packages, with each package containing 12 bowls, which must be delivered in sealed containers via common carrier to Fort Stewart. To be eligible, providers must maintain an active SAM registration and ensure full compliance with FDA medical device regulations. The contract falls under NAICS code 423450 and is managed by the Medical Supply Chain FSH. Interested parties must submit their responses by the deadline of October 5, 2026.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 13 hours ago

DEADLINE

Supply of Dental Base Plate WaxThis subcontract involves the supply of hard pink sheet base plate dental wax for prime contractors supporting Medical Supply Chain FSH projects under the Department of Defense. The required wax sheets must measure 6 by 3 by 1/20 inches and be capable of boiling out clean. All deliverables must be provided in standard commercial packaging and strictly adhere to FAR 52.223-23 sustainable products requirements. The opportunity is categorized under NAICS code 339114 and is associated with a place of performance in FPO, zip code 96607. Interested parties must note the response deadline of October 5, 2026, following the posting date of September 28, 2026.

Dental Equipment and Supplies Manufacturing

POSTED

about 13 hours ago

DEADLINE

Supply of X-Ray Film Identification Markers (R and L)This subcontract involves the manufacture and supply of radiopaque X-ray film identification markers for prime contractors supporting the Defense Logistics Agency. The provider is responsible for producing Gothic uppercase R and L markers and mounting strips that adhere to precise height, thickness, and dimensional tolerances. The contract is managed by the Department of Defense under the Medical Supply Chain FSH. All deliverables must comply with MIL-STD-129 standards for shipment and storage. The opportunity is categorized under NAICS code 339112, with a response deadline of October 5, 2026.

Surgical and Medical Instrument Manufacturing

POSTED

about 13 hours ago

DEADLINE

Borosilicate Microscope Cover Glass SupplierThis subcontract involves the supply of borosilicate microscope cover glass for prime contractors supporting Department of Defense DLA supply contracts. The supplier is responsible for manufacturing or sourcing optically clear, colorless glass with parallel surfaces and uniform homogeneity that exhibits low auto-fluorescence. All products must undergo a rigorous cleaning and washing process to ensure they are ready for use across all levels of microscopy in accordance with NSN 6640017187221. Managed by the Medical Supply Chain FSH, the contract falls under NAICS code 333248. The solicitation was posted on September 28, 2026, with a response deadline of October 5, 2026. The primary objective is the delivery of high-quality, cleaned, and ready-to-use microscope cover glasses that meet strict technical specifications for medical and scientific applications.

All Other Industrial Machinery Manufacturing

POSTED

about 13 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS