Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Manufacturing of Control Pedal (NSN 2540-01-690-0838)

Active

Federal

Response Deadline08/14/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the precision manufacturing of a single military control pedal identified by NSN 2540-01-690-0838, fully compliant with DLA technical specifications and MIL-STD-2073-1E packaging standards to ensure operational readiness and logistical compatibility. The product must be produced to exacting military tolerances and delivered in accordance with stringent defense procurement protocols, with the place of performance designated as Fort Carson, Colorado, 80913-4093. This is a subcontract opportunity under the NAICS code 336360, which classifies it within the Other Transportation Equipment Manufacturing sector, and it was posted on August 3, 2026, with a response deadline of August 14, 2026. The contracting entity is the Department of Defense through the Land Supply Chain organization, and the solicitation is accessible via the DIBBS platform under reference number SPE7L126Q1430. No set-aside designation or specific point of contact is provided, indicating the opportunity is open to qualified subcontractors without demographic or size restrictions.

General Info

Manufacture single military pedal NSN 2540-01-690-0838 to MIL-STD standards, deliver to Fort Carson, Colorado by August 14, 2026.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

336360 - Motor Vehicle Seating and Interior Trim ManufacturingView NAICS

Place of Performance

FORT CARSON, CO, 80913-4093, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Precision manufacturing of one military control pedal (NSN 2540-01-690-0838) to DLA technical specifications and MIL-STD-2073-1E packaging standards.

Similar Contracts

Same NAICS industry code

LINER, VEHICULAR FEN

Solicitation # SPE7L5-26-T-4748

The contract solicitation SPE7L5-26-T-4748 seeks the procurement of 10 units of LINER, VEHICULAR FEN with NSN 2510-01-643-4911 at a unit price of $10.00 totaling $100.00, to be delivered FOB origin within 21 days of award, with no quantity variance allowed. The product must comply with MIL-STD-2073-1E packaging standards, including specified preservation methods, cushioning materials, and unit container types, and must be marked in accordance with MIL-STD-129 with special marking code ZZ indicating required instructional labels such as OPEN THIS SIDE and DO NOT BEND. Palletization must follow DLA Packaging Requirements, and all items must be shipped to the designated DLA Distribution facility in New Cumberland, PA. Delivery is due by September 8, 2026, though the original required delivery date was April 1, 2027. The liner includes die-cuts to maintain shape during packaging and enhance stacking strength. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with the applicable revision determined by the solicitation issue or award date. Transportation and shipping directives are governed by DLAD PROC NOTES C19 and C20, and the solicitation is managed by the Department of Defense under NAICS code 336360 with primary point of contact Bradley Evans.

LAND SUPPLIER OPNS ENGINES

POSTED

about 5 hours ago

DEADLINE

TARPAULIN EXTENSION

Solicitation # SPE7L4-26-T-5983

This contract pertains to the procurement of a tarpaulin extension with NSN 2540-01-723-0399, quantity of one unit, to be delivered within ten days of contract award under solicitation SPE7L4-26-T-5983. Delivery is FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which override any conflicting standards including ASTM D3951. Packaging must adhere strictly to DLA’s packaging requirements RP001 and MIL-STD-129 for marking and labeling, with hazardous materials packaged according to TQ requirement IP025 if identified per FED-STD-313. Ozone-depleting chemicals are strictly prohibited in the product or its manufacturing process, and any substitute chemicals must be pre-approved unless explicitly authorized. The unit of issue is each (EA), and palletization must follow DLA guidelines. The destination is W8000V, Prince Sultan Air Base, Saudi Arabia, with shipment logistics governed by DLAD Proc Notes C19 and C20. The required delivery date is July 30, 2026, and the item is intended for U.S. Forces maintenance use. The contract excludes any set-aside provisions and falls under NAICS code 336360 for defense manufacturing.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 5 hours ago

DEADLINE

TARPAULIN EXTENSION

Solicitation # SPE7L4-26-T-5976

The contract pertains to the procurement of one unit of a tarpaulin extension identified by NSN 2540-01-723-6511 and part number 0381-940302-G, issued under solicitation SPE7L4-26-T-5976. Delivery is required within ten days of contract award, with shipment FOB origin and inspection and acceptance occurring at the destination. The item must be packaged in compliance with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951; if non-hazardous, it must meet commercial packaging standards per FED-STD-313, and if hazardous, it must adhere to TQ requirement IP025. All packaging and labeling must follow MIL-STD-129, with palletization aligned to RP001 DLA Packaging Requirements. The unit of issue is EA, with no variance permitted in quantity. The delivery address is designated for U.S. Forces at Prince Sultan Air Base in Saudi Arabia, with transportation governed by DLAD Proc Note C19 and C20. The required delivery date is July 30, 2026, and the contract was posted on August 4, 2026, with responses due by August 17, 2026. The contracting office is under the Department of Defense’s Combat Vehicles and Armament division, with Anna-Rachelle Betts listed as the primary point of contact.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 5 hours ago

DEADLINE

COVER, HEADREST

Solicitation # SPE4A5-26-T-323H

The contract pertains to the procurement of five headrest covers, identified by NSN 7290014569047 and part number 1C5040-11ACE, supplied by AMI Industries Inc. The item is classified as a critical application item and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which takes precedence over any other standards. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required in the sample lot unless otherwise stated, and critical, major, and minor attributes must be verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0. Item Unique Identification is not required per DFARS 252.211-7003(c)(1)(i). Packaging must adhere to ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization in accordance with DLA packaging requirements. The item has no shelf life constraint. Delivery is required FOB origin, with inspection and acceptance occurring at destination. The quantity is fixed at five units with zero variance allowed, and delivery must occur within 171 days from the contract date, with an original required delivery date of June 27, 2027. The unit price is $5.00 per unit, totaling $25.00. The packaging and shipping instructions specify use of the DLA designated freight address in Tracy, California, and require compliance with DLAD Proc Notes C19 and C20 for transportation. The solicitation was issued on August 4, 2026, with a response deadline of August 12, 2026, under contract number SPE4A5-26-T-323H. The primary point of contact is Francis Polakiewicz of the Department of Defense’s ASC Supplier Operations OEM Division.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

BOAST RFOP - FRAME, SEAT, VEHICULAR / NSN: 2540-01-414-7899

Solicitation # PANDTA-25-P-0000_026840

The U.S. Army Contracting Command – Detroit Arsenal is soliciting proposals under the Basic Ordering Agreement Sustainment Track (BOAST) program for a Firm-Fixed-Price order of 26 vehicular seat frames, identified by NSN 2540-01-414-7899 and part number 12933517, with an unexercised option for an additional 26 units. This is a total small business set-aside, and only vendors with a fully executed BOAST Basic Ordering Agreement in place by the closing date of August 24, 2026, at 1600 EST are eligible for award. The procurement is subject to strict export control requirements, necessitating that offerors hold a current DD Form 2345 certification under the Joint Certification Program to access the technical data package, which resides in SAM.gov. Proposals must be submitted electronically via email or through the Procurement Integrated Enterprise Environment, with a completed and signed pricing sheet only—no separate technical proposal is required. Evaluation will be based solely on price, with award going to the lowest-priced responsible offeror meeting all material requirements, including compliance with FAR 9.104 responsibility criteria and the BOAST BOA eligibility gate. The item must conform to CARC coating specifications per MIL-DTL-53072 and meet ISO 9001:2015 quality standards. First article testing requires two units to be produced and tested per contract requirements, with the test report accepted at the destination. Packaging and marking must follow MIL-STD-2073-1 and MIL-STD-129, with special attention to the SPI 12933517 Revision C, and all wood packaging must comply with ISPM 15 and bear an ALSC-approved mark. Delivery of production units is scheduled within 225 calendar days after written FAT approval, with the first article test units due within 90 calendar days of order placement, and shipment is FOB destination to DLA Distribution Red River in Texarkana, TX. The contractor must also comply with NIST SP 800-171 cybersecurity requirements, complete Counterintelligence Awareness and Anti-Terrorism Level I training, and ensure all data is destroyed upon contract completion. All submitted offers must cover the full quantity, and late or incomplete proposals will be rejected.

POSTED

about 10 hours ago

DEADLINE

Shock Absorber Supply and DeliveryThe contract outlines the procurement and delivery of 30 military-specification shock absorbers identified by NSN 2510017136612, requiring full compliance with MIL-STD packaging and labeling standards to ensure military operational readiness and logistical compatibility. The items must be supplied under a subcontract arrangement, with the Department of Defense through its LAND SUPPLY CHAIN organization overseeing the requirement. All deliveries must meet stringent military specifications without exception, and the packaging must adhere to standardized protocols for handling, storage, and distribution within defense supply chains. The solicitation was posted on August 3, 2026, with a firm response deadline of August 14, 2026, leaving a narrow window for potential vendors to submit offers. The NAICS code 336360 indicates the category covers automotive parts manufacturing specifically tailored for defense use. Although no specific place of performance or point of contact is listed, the contract is accessible via the DIBBS platform, suggesting all communication and submissions must occur through the designated federal procurement portal. The absence of set-aside details implies the opportunity is open to all qualified contractors, with emphasis placed on technical compliance, timely delivery, and adherence to military logistical standards.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Rearview Mirror (ARM) Manufacturing and SupplyThe contract seeks the manufacture and supply of a military-spec rearview mirror (ARM) identified by NSN 2540-01-712-3280 and part number 402/H1551, requiring strict compliance with designated technical specifications, quality control standards, and packaging requirements to meet military operational needs. The item must be produced to ensure durability, performance, and reliability under harsh conditions typical of combat vehicle environments. Responsibility for adherence to all referenced standards falls entirely on the contractor, who must deliver fully compliant units in accordance with defined delivery schedules and inspection protocols. This is a subcontract opportunity issued by the Department of Defense through LSO COMBAT VEHICLES AND ARMAMENT, with performance expected to be conducted in Huntsville, Alabama, at the ZIP code 35805-6715. The solicitation was posted on August 3, 2026, and responses are due by August 14, 2026. The North American Industry Classification System code 336360 categorizes this under Automotive Body, Trailer, and Other Motor Vehicle Manufacturing. No set-aside designation has been assigned, and the procurement is open to qualified subcontractors capable of fulfilling all technical, logistical, and compliance obligations without deviation.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

CYLINDER ASSEMBLY, R

Solicitation # SPE7LX-26-U-9184

The contract is for the procurement of a Cylinder Assembly, R, under solicitation SPE7LX-26-U-9184, issued by the Defense Logistics Agency through the Strategic Acquisition Program Directorate. It is a small business set-aside under NAICS code 336360 with a total contract value ceiling of $350,000 and an estimated quantity of three units, delivered FOB Origin with a 76-day delivery window after award. The item is identified by NSN 2540016592019 and is subject to indefinite delivery contract terms, allowing for future orders within one year of award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes commercial standards such as ASTM D3951. Packaging must comply with DLA’s RP001 for palletization and MIL-STD-129 for marking and labeling, with specific provisions for hazardous materials under TQ Requirement IP025 and non-hazardous materials under ASTM D3951 if not overridden by DLA requirements. Bare item marking must follow RQ017. Inspection and acceptance occur at the destination, with the Government holding full authority over quality verification. Electronic invoicing must be submitted through WAWF, and payment is subject to levies and accelerated payments for small business subcontractors. The contract incorporates numerous FAR and DFARS clauses including those for combating trafficking, employment verification, cybersecurity compliance under NIST SP 800-171, safeguarding information systems, hazardous material identification, sustainable products, changes, subcontracting, and pricing modifications. Offerors must comply with SBA small business size standards and submit required representations through SAM.gov, including UEI and CAGE codes. Proposals must be submitted electronically via DIBBS by August 18, 2026, and are evaluated on a best value basis considering price and non-price factors. The contract includes required clauses for accelerated payments to small business subcontractors, notification of potential safety issues, and prohibitions on unfair confidentiality agreements, and mandates adherence to Defense Department regulations on transportation, packaging, and labeling.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

ARM, REARVIEW MIRROR

Solicitation # SPE7L4-26-T-5961

The contract pertains to the procurement of one rearview mirror, identified by NSN 2540-01-712-3280 and part number 402/H1551, supplied by JCB INC. under solicitation SPE7L4-26-T-5961. Delivery is required within five days of order placement, with FOB origin terms and no variance permitted in quantity. Inspection and acceptance occur at the destination, and packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951. Non-hazardous items must be commercially packaged per ASTM D3951, while hazardous items under Fed-Std-313 must meet TQ requirement IP025. All packaging and labeling must adhere to MIL-STD-129. The item must be palletized per RP001 DLA Packaging Requirements and shipped via traceable freight methods—parcel post is prohibited. The shipment is designated as RDD/NCMS and must be delivered to W8TL AL ARNG UTES 3 at 5145 Triana Blvd, Huntsville AL 35805-6715, with the freight shipping and mark-for address identical. The required delivery date is July 31, 2026, and the contract includes government-specific identifiers for tracking and reporting, including DIC A3A, FC 61, and IPD 03. The point of contact for inquiries is Anna-Rachelle Betts at DLA.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

SEAT, VEHICULAR

Solicitation # SPE7L4-26-T-5743

The contract solicitation SPE7L4-26-T-5743 seeks the procurement of one vehicular seat with NSN 2540-01-412-7559, to be delivered within 168 days after order to the DLA Dist San Joaquin facility in Tracy, CA, under FOB origin terms. All work must strictly adhere to the DLA Master List of Technical and Quality Requirements referenced under RA001, with technical and quality standards further defined by tailored requirements including configuration change management, inspection and acceptance at origin, and the use of qualified products or manufacturers lists. The item is subject to strict export control under ITAR or EAR, limiting access to contractors who hold approved US/Canada Joint Certification Program status, have completed required DLA export training, and are authorized by DLA to handle the technical data. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, including the use of Data Matrix barcodes and adherence to Special Packaging Instruction AK14127559 Revision A, while hazardous materials must meet IP025 and Hazard Communication Standard requirements. Inspection and acceptance authority resides exclusively with the Government using verification levels ranging from Level VII with AQL 0.1 to Level II with AQL 4.0, requiring certification of conformance and compliance with SAE AS9003 or ISO 9001 quality systems. The contract incorporates multiple FAR and DFARS clauses covering equal opportunity, combating trafficking, cybersecurity safeguarding, supply chain integrity, export control, hazardous materials, subcontracting, and contractor representation, including mandatory submissions of UEI and CAGE codes, socioeconomic status, and disclosure of any covered telecommunications equipment. Offerors must submit proposals electronically via DIBBS by August 3, 2026, and are subject to evaluation on technical acceptability and price under an unspecified award basis, with no formal evaluation factors or weights provided. Payment will be processed through WAWF, and all contractor personnel are subject to whistleblower protections, compensation restrictions for former DoD officials, and cybersecurity reporting obligations under DFARS 252.204-7012 and NIST SP 800-171 assessment requirements. Pricing details are fragmented and incomplete within the solicitation, with no definitive contract value determined, and no options or extended delivery periods formally defined.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

LADDER, VEHICLE BOARDIN

Solicitation # SPE7LX-26-U-9148

The contract is for the procurement of 186 vehicle boarding ladders, identified by NSN 2540-01-659-0724, under solicitation SPE7LX-26-U-9148, issued by the Defense Logistics Agency’s Land and Maritime Strategic Acquisition Program Directorate. This is a total small business set-aside under NAICS code 336360, with a guaranteed minimum order of 27 units and a minimum delivery order quantity of 46 units, estimated to have an annual demand of 186 units and a maximum contract value of $350,000. The item is classified as a critical application item and must conform to detailed technical specifications outlined in Basic Drawing NR 19207 12602409 Revision C and Reference Drawing NR 19207 12593834 Revision J, with full compliance required to the DLA Master List of Technical and Quality Requirements, particularly those designated by 'R' or 'I' numbers. The ladder must be manufactured under an inspection system compliant with ISO 9001:2015 or an acceptable equivalent, with a Certificate of Conformance required upon delivery. Inspection and acceptance are to occur at origin, and packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, with specific preservation and unit container parameters defined. Delivery is required within 179 days after receipt of order under FOB Origin terms, and the solicitation may result in an indefinite delivery contract valid for one year, with orders issued within that timeframe. Export-controlled technical data applies under ITAR or EAR, and compliance with DFARS 252.225-7048 is mandatory; only offerors with approved US/Canada Joint Certification Program status, completed DOD export control training, cleared DLA questionnaire, and formal DLA approval to access controlled data are eligible. Cybersecurity requirements include safeguarding covered defense information in accordance with FAR 52.204-7012, NIST SP 800-171, and CMMC Level 2 certification, with all subcontractors subject to the same export control and cybersecurity obligations. The Berry Amendment and Buy American Act apply, with a reduced threshold of $150,000, and offerors must represent their

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Universal Joint Yoke SupplyThe contract entails the supply of universal joint yokes identified by NSN 1680016923584 for use in Department of Defense applications, requiring full compliance with military specifications and cybersecurity standards. These components are critical for defense systems and must meet rigorous performance, durability, and security requirements to ensure operational reliability in mission-critical environments. The work is to be performed at Cherry Point, North Carolina, with a delivery schedule aligned to defense logistics timelines. This is a subcontract opportunity under NAICS code 336360, which pertains to aerospace product and parts manufacturing, indicating the technical sophistication expected from the supplier. The solicitation was posted on August 2, 2026, with responses due by August 10, 2026, and is managed by the ASC Commodities Division of the Department of Defense. While no specific set-aside status is designated, bidders must demonstrate capability in meeting federal defense procurement standards, including secure supply chain practices and adherence to cybersecurity protocols for defense-related hardware. All submissions must be made through the official DIBBS platform linked in the contract details.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

OIL FILTER CUTTER

Solicitation # SPE7L1-26-T-914K

The contract is for the procurement of one oil filter cutter with NSN 2940-01-536-9281 and part number 175-7546, supplied by approved vendors including Caterpillar Inc, Finning UK Ltd, and Hastings Deering (Aust) Pty Ltd. The item is classified as a critical application item and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which override any other standards such as ASTM D3951. Packaging must adhere strictly to MIL-STD-129 and RP001 DLA Packaging Requirements, with unit of issue as a single unit and no tolerance for quantity variance. The delivery is FOB origin with a 20-day lead time, and inspection and acceptance occur at the destination. The shipment must be dispatched using the fastest traceable means, excluding parcel post, with delivery addressed to W8T2 TX ARNG FMS 20 at 301 East Regis Street Suite 1122, Lubbock TX 79403-1122. The RDD is 777, and the shipment must be marked accordingly. The contract reference is SPE7L1-26-T-914K, with a required delivery date of July 30, 2026. The solicitation was posted on August 4, 2026, and responses are due by August 17, 2026. The contracting office is under the Department of Defense’s Land Supply Chain, with Kristina Derry listed as the primary point of contact. All items must be properly labeled and palletized per DLA specifications, and government identification must be removed from non-accepted supplies. Configuration changes require formal engineering change proposals or variance requests.

Other Motor Vehicle Parts Manufacturing

POSTED

about 5 hours ago

DEADLINE

COVER, PROTECTIVE, DU

Solicitation # SPE7L1-26-T-914F

The contract pertains to the procurement of three protective dust and moisture seals, identified by NSN 5340-01-572-0086 and part number 780-518-15SG6-WS, manufactured by Glenair Inc. These items must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, including specific preservation methods, marking codes, and palletization aligned with DLA packaging guidelines. The supplies are to be delivered FOB destination within 20 days of contract award, with zero variance permitted in quantity, and inspection and acceptance both occurring at the destination. The delivery address is MALS-12 at MCAS Iwakuni, Japan, with a parcel post address for FPO AP 96310-7161, and transportation logistics reference DLA procedural notes C19 and C20. The requirement is part of solicitation SPE7L1-26-T-914F, posted August 4, 2026, with responses due by August 17, 2026, and the original required delivery date set for July 30, 2026. All documentation, including source approval requests and hazardous material handling, must satisfy related DLA clauses, and the unit of issue is each, priced at $3.00 per unit for a total of $9.00.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

TUBE ASSEMBLY, METAL

Solicitation # SPE7L1-26-Q-1439

This contract is for the procurement of a metal tube assembly identified by NSN 4710-01-675-9509 and part number P5574-2 from TRANSDIGM INC, with a required quantity of 69 units to be delivered within 246 days of award. The item must strictly conform to the source-controlled drawing numbered 53711-7124755 Revision C dated 04/09/2016, and only suppliers listed on that drawing are currently approved, though additional qualified sources may exist without being reflected on the drawing. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The product must not contain any Class I ozone-depleting chemicals, and any substitute chemicals require prior approval unless explicitly permitted by the specification. Mercury or mercury-containing compounds are prohibited unless used in specified functional applications such as batteries, fluorescent lights, sensors, weapon systems, or Navsea-approved reagents, in which case portable devices must be shockproof and feature a secondary containment barrier per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with marking following MIL-STD-129 and no special marking codes. Items must be palletized according to DLA standards and shipped to the designated DLA Distribution facility in New Cumberland, Pennsylvania. Inspection and acceptance occur at the destination, with no variance permitted in quantity, and the contract incorporates all applicable DLA procedural notes for transportation and logistics.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 5 hours ago

DEADLINE

PLUG, PROTECTIVE, DUST A

Solicitation # SPE7L1-26-T-910W

The contract is for a protective dust and moisture seal plug identified by NSN 5340-01-357-7621, with a quantity of one unit, to be delivered within five days of award under purchase request 7017720090. The item is procured through a federal solicitation issued by the Department of Defense’s Land Supply Chain, with the solicitation number SPE7L1-26-T-910W, posted on August 4, 2026, and response deadline set for August 17, 2026. The place of performance is Fort Carson, Colorado, with the NAICS code 332510 indicating manufacturing within the engine and turbine manufacturing sector. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and the applicable revision depends on whether the acquisition is simplified or large, with the effective revision tied to the solicitation issue date, award date, or any amendment date. The supplier, KHD Deutz of America Corp in Norcross, Georgia, must ensure compliance with DLA packaging standards and remove any government identification from non-accepted supplies. The primary point of contact for the solicitation is Michael Nordahl, reachable via email and phone provided in the contract data.

Hardware Manufacturing

POSTED

about 5 hours ago

DEADLINE

STRAP, RETAINING

Solicitation # SPE7L1-26-T-912K

The contract pertains to the procurement of one retaining strap identified by NSN 5340-01-700-7621 under solicitation SPE7L1-26-T-912K, issued by the Department of Defense through the Land Supply Chain. Delivery is required within five days of award at FOB origin, with inspection and acceptance occurring at the destination, specifically the Fleet Readiness Center Southeast in Jacksonville, Florida. Strict packaging requirements mandated by MIL-STD-2073-1E and DLA packaging standards must be followed, including compliance with MIL-STD-129 for marking and adherence to specified packaging codes and methods. Ozone-depleting chemicals are strictly prohibited, and any substitutes must be approved unless already authorized by specification. The item must be shipped via the fastest traceable means, with parcel post explicitly forbidden. Technical compliance is governed by multiple reference drawings dated April 10, 2022, and the supplier must adhere to the Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements and the handling of covered defense information. Full and open competition applies, with no set-aside designation. The contract enforces a zero variance in quantity, and the required delivery date is August 5, 2026. All documentation and compliance are tied to the DLA Master List of Technical and Quality Requirements, and the supplier must be prepared to support government audit and data tracking needs, including designated points of contact and supply chain identifiers.

Hardware Manufacturing

POSTED

about 5 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-913C

This contract issued by the Department of Defense through the Land Supply Chain under solicitation SPE7L1-26-T-913C seeks one unit of NSN 3040-01-628-1622, identified as W S DARLEY & CO P/N X8102, under the CAM,CONTROL designation. The item must be delivered within five days of award, FOB origin, with no tolerance for quantity variance, and is subject to inspection and acceptance at the destination. Packaging must comply with MIL-STD-2073-1E, including specific packaging methods, materials, and codes, while marking follows MIL-STD-129 with no special marking required. Palletization adheres to DLA packaging standards, and the shipment is designated as RDD 999/NMCS with transportation governed by DLAD PROC NOTE C19 and C20. The delivery destination is the Reparable Issue Point at Camp Kinser, with distribution managed through M20220. The required delivery date is August 3, 2026, and the solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026. Technical and quality requirements are referenced from the DLA Master List of Technical and Quality Requirements, applicable based on acquisition size and amendment dates. The unit of issue is each (EA), and the contract is classified under NAICS code 333613 with no set-aside designation. Primary point of contact is Kristina Derry, reachable at the provided phone and email.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

RADIATOR, ENGINE COO

Solicitation # SPE7L1-26-T-915A

This contract is for the procurement of five engine radiator units identified by NSN 2930-01-709-2109 and part number 2604117C92, with a unit price of $5.00 and a total contract value of $25.00. Delivery is required within 20 days from the date of award, with shipment FOB origin and no variance allowed in quantity. Inspection and acceptance occur at the origin point, and packaging must strictly comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 without special codes. The item must not contain any Class I ozone-depleting chemicals, and mercury or mercury-containing compounds are prohibited unless specifically exempted for approved applications such as certain batteries, lighting, instruments, or chemical reagents as defined by NAVSEA, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Substitute chemicals require prior approval unless authorized by the specification. The end user is the Jordan Armed Forces, with freight shipping directed through Serra International Inc. in Newark, New Jersey, and the order is managed under the Defense Logistics Agency using the unit of issue EA. The solicitation number is SPE7L1-26-T-915A, with a required delivery date of August 4, 2026, and the contract falls under NAICS code 333618 for heating equipment manufacturing.

Other Engine Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-913T

The contract specifies the procurement of a gasket with NSN 5330-00-391-8381 and part number N0900367 from LESLIE CONTROLS, INC., with a quantity of two units to be delivered within 20 days of contract award. Delivery is FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. The item must comply with DLA’s packaging requirements as outlined in RP001 and MIL-STD-2073-1E, including use of a medium duty, waterproof, greaseproof, opaque bag meeting MIL-DTL-117, Type II, Class C, Style 1, particularly for direct vendor delivery, foreign military sales, and stock shipments. Marking must follow MIL-STD-129 with no special labeling required. The gasket must not contain asbestos as defined by FED-STD-313, and mercury or mercury-containing compounds are strictly prohibited unless exempted for specific functional uses such as batteries, fluorescent lights, instruments, sensors, weapon systems, or chemical reagents specified by NAVSEA; any permitted mercury-containing devices must have shockproof design and a secondary containment boundary per NAVSEA 5100-003D. Packaging and palletization must adhere to DLA standards, and hazardous material shipping details require use of traceable freight services only—parcel post is prohibited—with the delivery address designated to the Naval Computer and Telecommunications Station Cutler in Maine. The contract is governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, and the applicable revision is controlled by the solicitation issue date. The solicitation number is SPE7L1-26-T-913T, with a response deadline of August 17, 2026, and the original required delivery date is July 30, 2026.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

BRACKET, VEHICULAR COMP

Solicitation # SPE7L1-26-T-913F

This contract issued by the Department of Defense through the Defense Logistics Agency specifies the procurement of one vehicular bracket, part number 402/H2230 with NSN 2590-01-712-3185, under solicitation SPE7L1-26-T-913F. The item must be delivered within five days of contract award with no tolerance for quantity variance, shipped FOB origin, and inspected and accepted at the destination. All packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific methods for preservation, wrapping, and palletization per DLA’s packaging requirements. The item must be marked with the provided special marking code and shipped via traceable freight methods, excluding parcel post, to the designated government freight address in Huntsville, Alabama. The contract strictly prohibits the use of Class I ozone-depleting chemicals in any form and requires any substitute materials to be submitted for approval unless explicitly authorized by the specification. Technical and quality standards referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revision controls tied to the solicitation or award date depending on the acquisition size. The unit of issue is established per DoD standards, and the item is designated for government use with specific identification codes including IPD, DIC, and project references. The required delivery date is August 3, 2026, and the contract’s point of contact is Kristina Derry of the Land Supply Chain organization.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 5 hours ago

DEADLINE

CYLINDER ASSEMBLY, ACTU

Solicitation # SPE7L1-26-T-912N

The contract pertains to the procurement of one cylinder assembly, actuating, linear, identified by NSN 3040-01-651-0388 and part number AVP-0.75X2.25-R, with a quantity of one unit. Delivery is required within ten days from the contract award, with delivery terms set at FOB origin and no quantity variance permitted. Inspection and acceptance both occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E, including specific packaging methods, materials, and container specifications. Marking must adhere to MIL-STD-129 with no special marking required. The item is subject to DLA's Packaging Requirements for Procurement and palletization standards, with shipments directed to the Distribution Management Office at Camp Kinser, Japan. Transportation and freight details reference specific DLA procedural notes, and the item is marked for delivery to MWSS 172. The solicitation number is SPE7L1-26-T-912N, with a response deadline of August 17, 2026, and the original required delivery date is July 31, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced under R and I numbering, with the applicable revision tied to the solicitation or award date depending on acquisition size. The contracting agency is the Department of Defense under the Land Supply Chain, and the point of contact is Kristina Derry.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-910S

The contract pertains to the procurement of 1,220 units of a spacer ring identified by NSN 5365-15-120-2240 and part number 60154625, supplied by IVECO DEFENCE VEHICLES S.P.A. The item is classified as a commercial item and must comply with technical and quality requirements referenced from the DLA Master List, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1, requiring zero non-conformances unless otherwise stated. Attributes are assigned verification levels or AQLs based on criticality, with unspecified attributes treated as major. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special markings, and palletization in line with DLA standards. Delivery is FOB origin with a 171-day lead time, inspection and acceptance occurring at the destination. The unit of issue is each, with a total price of $1,220.000. The item is to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with the original required delivery date set for May 12, 2027, and a need ship date of January 31, 2027. Transportation protocols and freight details are governed by DLA procedural notes C19 and C20. The solicitation was issued under SPE7L1-26-T-910S, with the response deadline on August 12, 2026, and falls under NAICS code 332119.

Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 5 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-911E

The contract pertains to the procurement of one unit of a COVER, ACCESS item identified by NSN 5340-01-260-9890, with a delivery requirement of 10 days after award. The solicitation, issued under number SPE7L1-26-T-911E, is governed by DLA packaging and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with compliance dictated by the revision in effect on the solicitation issue date or award date depending on acquisition size. Sampling must conform to MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with verification levels of VII, IV, and II assigned to critical, major, and minor attributes respectively, or corresponding AQLs of 0.1, 1.0, and 4.0; unspecified attributes are treated as major. Zero non-conformances are required in sampled lots unless otherwise stated, and manufacturers may choose attribute or variable inspection methods under MIL-STD-1916. This is a PRI QML-restricted item, limiting award exclusively to accredited manufacturers or distributors listed on the current PRI QML, with distributors required to offer products from accredited manufacturers. Prior to award, the buyer must verify the vendor’s accreditation status and retain a dated copy of the PRI QML in the contract file. The solicitation was posted on August 4, 2026, with responses due by August 17, 2026, and is managed by the Department of Defense’s Land Supply Chain, with Kristina Derry as the primary point of contact.

Hardware Manufacturing

POSTED

about 5 hours ago

DEADLINE