Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Maptek Stationary LiDAR Scanner Systems Supply

Active

Federal

Response Deadline09/24/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract through the CDC Office of Acquisition Services involves the supply of two factory-calibrated stationary LiDAR scanner systems for prime contractors supporting CDC/NIOSH mining research projects. The procurement specifically requires Maptek SR3-CL and NS4 units configured for 90-degree underground roof data capture, accompanied by FZG2 field controllers, vehicle mounts, and underground lighting kits. Performance for this contract is centered in Pittsburgh, Pennsylvania, under NAICS code 334511. All delivered equipment must comply with HHS Section 508 ICT accessibility standards to ensure full regulatory alignment.

General Info

CDC subcontract for Maptek LiDAR scanners and accessories for NIOSH mining research projects.

Agency

Department Of Health And Human Services → CDC Office Of Acquisition ServicesView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingView NAICS

Place of Performance

Pittsburgh, PA, 15236, USA

Set-Aside

NONE

Documents

This scope was carved out of 75D30126Q79286.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Maptek SR3-CL and NS4 Stationary LiDAR Scanners

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 21

subcontract

Response DeadlineSep 24

Submission deadline

Response Deadline

09/24/2026, 04:00:00 PM UTCin 3 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Health And Human Services → CDC Office Of Acquisition Services

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Health And Human Services → CDC Office Of Acquisition Services

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies factory-calibrated stationary LiDAR scanner systems for prime contractors on CDC/NIOSH mining research projects. Provisions Maptek SR3-CL and NS4 units configured for 90-degree underground roof data capture. Includes underground lighting kits, FZG2 field controllers, and vehicle mounts. Requires compliance with HHS Section 508 ICT accessibility standards. Delivers two fully configured scanner systems with accessories.

Similar Contracts

Same NAICS industry code

BOX, ACCESSORIES STOWAGE

Solicitation # SPE7L1-26-R-0127

Solicitation SPE7L1-26-R-0127 is a total small business set-aside issued by DLA Land and Maritime for the procurement of 123 accessories stowage boxes under NSN 2540-01-568-5520. This firm fixed price contract requires delivery within 190 days after the date of award, with inspection and acceptance occurring at the destination. The award will be based on the best value to the government, with price and other evaluation factors weighted approximately equally. The contract mandates strict adherence to DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling, and palletization must follow RP001. Hazardous materials must be packaged per TQ requirement IP025 and labeled according to the Hazard Communication Standard. Quality assurance will be governed by MIL-STD-1916 or ASQ H1331, with specific verification levels assigned to critical, major, and minor attributes. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with DFARS cybersecurity and Buy American regulations.

LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Maptek SR3-CL and NS4 Stationary LiDAR Scanners

Solicitation # 75D30126Q79286

The Centers for Disease Control and Prevention, on behalf of the National Institute for Occupational Safety and Health, is soliciting the procurement of two factory-calibrated stationary LiDAR scanner systems for the Pittsburgh Mining Research Division. The requirement consists of one Maptek SR3-CL system, including an underground lighting kit and FZG2 field controller, and one Maptek NS4 system, including a vehicle mount kit. These systems are specifically required for their 90-degree scan range and ability to capture RGB data to create accurate pointclouds of underground environments. The acquisition is being conducted as a commercial product procurement under FAR Part 12, with the government intending to award a firm-fixed-price purchase order on a sole-source basis to Maptek Inc. dba KRJA Systems, Inc. The solicitation, numbered 75D30126Q79286, was issued on September 21, 2026, with a response deadline of September 24, 2026. All equipment must be delivered FOB Destination to the facility in Pittsburgh, Pennsylvania, within 60 days after receipt of the order. Offerors must comply with HHS Section 508 accessibility standards and provide an AI Compliance and Risk Management Plan if artificial intelligence is utilized in the performance of the contract. Payment will be processed electronically via the Department of Treasury Invoice Processing Platform.

CDC Office Of Acquisition Services

POSTED

about 14 hours ago

DEADLINE

UNMANNED AIRCRAFT SYSTEMS (UAS) FOR USACE

Solicitation # W912HQ26S0080

Solicitation W912HQ26S0080 is a 100% small business set-aside for the Department of the Army, U.S. Army Corps of Engineers (USACE), to procure brand-name Skydio X10 Unmanned Aircraft Systems (UAS) and associated accessories. The requirement is for five Skydio X10 UAS, five Skydio 3D Scan licenses, and ten 150W batteries to replace obsolete Skydio X2 platforms and maintain fleet commonality and training standards. The total estimated value for this procurement is 233,446.90 dollars. This is a Firm-Fixed Price delivery order being awarded based on the Lowest Price Technically Acceptable (LPTA) process, where the government will select the responsible offeror who is technically acceptable and provides the lowest evaluated price. The procurement is restricted exclusively to the Skydio X10 platform to ensure compliance with DIU Blue UAS standards and AI-assisted flight capabilities for infrastructure inspection; alternative or or-equal products are not acceptable. Eligible offerors must be authorized resellers of Skydio products and submit a two-volume proposal consisting of a technical capability narrative and a completed pricing schedule. All quotes must be submitted via email to the designated points of contact by September 22, 2026. The contract incorporates standard FAR and DFARS clauses, including prohibitions on covered defense telecommunications equipment and specific requirements for safeguarding covered defense information.

POSTED

about 14 hours ago

DEADLINE

LIPTM000250_Shore Sub C4I IPT_ZYFER M-CODE_SEWP (C)The Naval Information Warfare Systems agency, specifically Niwc Atlantic, has issued a forecast for the Shore Sub C4I IPT Zyfer M-Code GPS Module contract. This procurement falls under NAICS code 334511 and is intended for performance in Portsmouth. The project is managed by Contracting Officer Jeremy Shull and Secondary Point of Contact Quincy Gaines. This acquisition is categorized as a forecast and is associated with the SEWP vehicle for procurement.

POSTED

DEADLINE

LIPTM000250_Shore Sub C4I IPT_MISC SOAPHE MATERIAL & NON ESI SOFTWARE_SEWP (C)This forecast is issued by the Naval Information Warfare Systems Command, specifically Niwc Atlantic, for the procurement of C4I modernization equipment. The requirement focuses on the acquisition of miscellaneous SOAPHE material and non-ESI software, categorized under NAICS code 334511. The project is slated for performance in Portsmouth and is managed by Contracting Officer Jeremy Shull and Secondary Point of Contact Matthew R. Gray. This procurement is intended to support the Shore Sub C4I IPT and is listed as a forecast with a posted date of September 20, 2026.

POSTED

DEADLINE

EGYPTIAN Navy AINTS (EG-P-LGQ, A2) (C)The Egyptian Navy Autonomous Intelligence Systems AINTS Platform Integration project is a forecast opportunity managed by the Naval Information Warfare Systems agency. This initiative focuses on the integration of autonomous intelligence systems, categorized under NAICS code 334511 for semiconductor and electronic assembly. The project is designated as EG-P-LGQ, A2 and is scheduled for performance in San Diego. Administrative oversight for this contract is handled by Contracting Officer Kristin White and Secondary Point of Contact Kimberly Ellis. The procurement is currently listed as a forecast with a posted date of September 20, 2026, indicating a long-range acquisition plan for the development and implementation of these intelligence platforms.

Naval Information Warfare Systems

POSTED

DEADLINE

Re-negotiate TTTS OY1-OY4 CLINs due to Redesign under Contract #N0003924C9001The Naval Information Warfare Systems is seeking to renegotiate the pricing for Option Years 1 through 4 CLINs under contract N0003924C9001. This action is necessitated by a redesign of the TTTS, which the contractor expects will increase overall costs, while simultaneously accounting for the removal of one government furnished property item. The project falls under NAICS code 334511 and is slated for performance in San Diego. Wendy M. Fletcher serves as the primary Contracting Officer for this forecast, with Katherine Sisk acting as the secondary point of contact.

Naval Information Warfare Systems

POSTED

DEADLINE

Hazardous Weather Detection and Display Capability (HWDDC) systems SBIR Phase IIIThe Naval Information Warfare Systems Command, specifically Niwc Pacific, has issued a forecast for the Hazardous Weather Detection and Display Capability (HWDDC) systems SBIR Phase III. This initiative focuses on the development and implementation of specialized weather detection and display systems, with the primary place of performance located in San Diego. The project is categorized under NAICS code 334511 and is managed by Contracting Officer Eric Pomroy. This forecast indicates a strategic effort to advance hazardous weather capabilities through a Small Business Innovation Research Phase III transition, ensuring critical weather data is effectively detected and displayed for operational use.

POSTED

DEADLINE

LIPTM00004_MEARTS_SAC_Follow-On (PPA LSUBP00001-0007)

POSTED

DEADLINE

Buoyancy Engine I Procurement Service I SOLE SOURCE

Solicitation # oregon-state-university-1295138

Oregon State University is seeking to procure buoyancy engines for its underwater Slocum electric gliders from Teledyne Webb Research. This is a sole source procurement because Teledyne Webb Research is the only manufacturer and distributor capable of providing engines that meet the specific compatibility requirements of the university's existing equipment, specifically requiring a 200-meter capable change in buoyancy. The solicitation, identified by number oregon-state-university-1295138, was posted on September 18, 2026, with a response deadline of September 25, 2026. Entities wishing to challenge this sole source determination must submit their objections via email to Cassandra Hurd by the specified closing date.

Oregon State University

POSTED

DEADLINE

Supply of Motional Transducer Pickups (NSN 6695014828743)This subcontract involves the supply of 14 Motional Transducer Pickups for prime contractors fulfilling Department of Defense supply contracts through the ASC Supplier Oper OEM Division. The end items must strictly match NSN 6695014828743 and adhere to RP001 packaging requirements and RQ001 tailored higher level contract quality standards for manufacturers. The procurement falls under NAICS code 334511 and is designated for performance in Tracy, California. Interested parties must respond by the deadline of September 23, 2026, following the solicitation posted on September 18, 2026.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

INDICATOR, AZIMUTH

Solicitation # SPE4A7-26-T-711E

Solicitation SPE4A7-26-T-711E is a Request for Quotations issued by DLA Aviation for the procurement of eight Azimuth Indicators, identified by NSN 1430251638407 and part number 60226456-03. The requirement falls under NAICS code 334511. The items are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California, with a required delivery date of July 12, 2027. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. Packaging must comply with MIL-STD-129 and RP001, while bare item marking must follow RQ017. Quality assurance will be conducted using sampling methods per MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement if MIL-STD-105/ASQ Z1.4 is used. The solicitation incorporates various FAR and DFARS clauses, including requirements for the Buy American Act, safeguarding covered defense information per DFARS 252.204-701 own, and electronic invoicing through the Wide Area WorkFlow system. Quotes must be submitted via DIBBS, and additive manufacturing is prohibited unless specifically authorized.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

More opportunities from Department Of Health And Human Services → CDC Office Of Acquisition Services

Same awarding agency

Maptek PointStudio Software Licenses and MaintenanceThis subcontract through the CDC Office of Acquisition Services provides brand-name Maptek PointStudio software licenses and annual maintenance for prime contractors supporting CDC/NIOSH mining safety projects. The procurement includes active software licenses and subscriptions for four units, specifically incorporating Geotechnical Tools and Rock Bolt Tools add-on modules designed for the processing and analysis of LiDAR point clouds. The contract is categorized under NAICS code 513210 and requires strict adherence to Section 508 compliance with HHS ICT accessibility standards. Performance of the contract is centered in Pittsburgh, Pennsylvania, ensuring that the necessary software tools are available to support critical mining safety research and operational objectives.

Software Publishers

POSTED

about 14 hours ago

DEADLINE

Maptek PointStudio License with Geotechnical Tools

Solicitation # 75D30126Q79280

The Centers for Disease Control and Prevention, on behalf of the National Institute for Occupational Safety and Health, is seeking brand-name commercial software licenses, subscriptions, and maintenance for Maptek PointStudio Software. This requirement includes Geotechnical Tools and Rock Bolt Tools add-on modules, which NIOSH researchers use to analyze LiDAR point clouds to measure pillar dimensions and ground changes in underground mines to improve safety. The government intends to award a sole-source, firm-fixed-price purchase order to Maptek Inc. dba KRJA Systems, Inc., as they are determined to be the only responsible source capable of satisfying the agency's minimum requirements. The contract consists of four line items: annual maintenance for PointStudio and Geotechnical Tools, and annual subscriptions for Geotechnical and Rock Bolt Tools. All deliverables must be provided electronically to the end-user and the Contracting Officer's Representative within 60 days after receipt of order. Offerors must provide an active SAM.gov Unique Entity Identifier and CAGE code, and they are required to disclose the use of any Artificial Intelligence, including Generative AI, by submitting an AI Compliance and Risk Management Plan. Additionally, all electronic content must conform to Section 508 accessibility standards and HHS acceptance criteria. Payment will be processed via electronic funds transfer through the Department of Treasury Invoice Processing Platform.

Software Publishers

POSTED

about 14 hours ago

DEADLINE

Flyability Elios 3 Surveying LiDAR Drone

Solicitation # 75D301-26-Q-79289

The Centers for Disease Control and Prevention intends to award a sole source firm fixed price purchase order to Flyability, Inc. for the procurement of an Elios 3 Surveying LiDAR Drone package. This specialized system is designed for LiDAR work in underground mining and other confined spaces, utilizing SLAM-based LiDAR for stabilization and autonomous return-to-start capabilities. The procurement includes the Elios 3 Surveying Package with three years of premium software access, a range extender add-on, and a flammable gas sensor payload capable of detecting methane, diesel, and over 20 other gas types. The contract also covers all associated shipping and dangerous goods shipping fees. The period of performance is 60 days from the date of award, with all deliverables due to the Contracting Officer's Representative by September 30, 2026. While the government intends to negotiate with Flyability, Inc. under FAR 12.102 and 12.201-1, it will consider other quotations received by September 18, 2026, to determine if a competitive procurement is necessary. The award will be based on the most advantageous proposal, considering price and technical capabilities. The contractor must adhere to strict Section 508 accessibility standards and comprehensive IT security guidelines, including NIST and HHS secure coding practices, to ensure the software and hardware are secure and accessible.

Aircraft Manufacturing

POSTED

about 14 hours ago

DEADLINE

Environmental Monitoring Hardware Supply and InstallationThis subcontract for the CDC Office of Acquisition Services involves the supply and installation of IntelliSense hardware components to expand monitoring capabilities for prime contractors on DHCPP projects. The scope of work includes the installation, configuration, and setup of new probes and controllers to ensure full interoperability with existing systems, as well as the performance of IQ/OQ qualification for all new additions. The contractor is required to provide a one-year hardware warranty and deliver fully installed and qualified monitoring points. This project falls under NAICS code 238210 and is performed in the 30329 zip code area, with a response deadline of September 28, 2026.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

ISO 17025 Certified Calibration ServicesThis subcontract through the CDC Office of Acquisition Services provides NIST-traceable calibration and recalibration services for temperature, humidity, and CO2 environmental monitoring probes. The services are designed to support prime contractors on CDC DHCPP projects, ensuring that all probes maintain the accuracy required for CLIA, ISO, and QMML compliance. The selected provider must hold ISO 17025 certification and utilize NIST-traceable equipment to perform the calibrations. Deliverables include formal calibration certificates and reports for every probe serviced. The contract falls under NAICS code 811310 and is performed in the 30329 zip code area.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

IntelliSense System Maintenance and Technical SupportThe IntelliSense System Maintenance and Technical Support subcontract, issued by the CDC Office of Acquisition Services under the Department of Health and Human Services, focuses on the operational support and system administration of the IntelliSense automated environmental monitoring system. The contractor is responsible for providing 24/7 remote and onsite technical assistance, managing server software and firmware updates, and conducting annual IQ/OQ procedures. Additionally, the scope includes training staff on probe replacement and the delivery of detailed support logs and IQ/OQ reports. Technical requirements for this engagement include strict adherence to Section 508 compliance and FIPS 140 validation to ensure the secure encryption of personally identifiable information. The work is categorized under NAICS code 811210 and is performed in the 30329 zip code area. Interested parties must respond by September 28, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Specialized Equipment Freight ServicesThe Specialized Equipment Freight Services subcontract, managed by the CDC Office of Acquisition Services under the Department of Health and Human Services, involves the transport and delivery of sensitive scientific testing equipment. The contractor is responsible for hauling AE systems from the supplier to the NIOSH/PMRD facility located in Pittsburgh, Pennsylvania. To maintain equipment integrity, the provider must utilize secure packaging and specialized transport methods for these sensitive electronic instruments. The project requires the confirmed shipment to be delivered to the specified government destination within 60 days of the award. This opportunity falls under NAICS code 484121 and was posted on September 19, 2026, with a response deadline of September 23, 2026.

General Freight Trucking, Long-Distance, Truckload

POSTED

DEADLINE

Acoustic Emission Testing Equipment SupplierThis subcontract involves the supply of a complete Acoustic Emission Testing Equipment system for prime contractors working on CDC/NIOSH projects. The scope of work includes the delivery of a Micro-SHM-4-WIFI Four AE Channel Node and an Indoor AC Power Injector to Pittsburgh, Pennsylvania. The supplier is responsible for ensuring full system compatibility, providing necessary software licenses, and offering commercial warranties. The agreement is managed by the CDC Office of Acquisition Services under the Department of Health and Human Services. All deliverables must comply with Buy American requirements and Section 508 accessibility standards. The contract is categorized under NAICS code 423490.

Other Professional Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

Maintenance Agreement - Automated Equipment Monitoring

Solicitation # 75D301-26-Q-79283

The Centers for Disease Control and Prevention is seeking a single, firm-fixed-price contract for commercial maintenance and support services for the IntelliSense automated environmental monitoring system in Atlanta, Georgia. The scope of work encompasses preventive and corrective maintenance, calibration, IQ/OQ, technical support, software and firmware updates, and training to ensure continuous monitoring capabilities. Additionally, the contract includes an optional CLIN for the installation, configuration, and qualification of additional monitoring points and hardware. This solicitation, numbered 75D301-26-Q-79283, is managed by the CDC Office of Acquisition Services under NAICS code 811210. Responses are due by September 28, 2026. All provided services and components must be fully compatible and interoperable with the existing IntelliSense environment.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Acoustic Emission Testing Equipment for Coal Mine Roof Safety

Solicitation # 75D301-26-Q-79226

The Centers for Disease Control and Prevention, through the National Institute for Occupational Safety and Health, is seeking to acquire Acoustic Emission (AE) testing equipment to support research on underground coal mine roof safety. The required system must be a complete and compatible integrated unit consisting of a four-channel data collection system, signal conditioners capable of root-mean-square output, multiple sensors for use on rock and drilling machinery, and all necessary software, licenses, and cables. This is an intended sole-source acquisition to MISTRAS Group, Inc., as market research identified them as the only source capable of meeting the government's requirements. The equipment is to be delivered FOB Destination to the NIOSH Pittsburgh Mining Research Division in Pennsylvania within 60 calendar days of the award. The solicitation, numbered 75D301-26-Q-79226, is an unrestricted acquisition under NAICS code 541380. Award is contingent upon technical acceptability, a determination of fair and reasonable pricing, and contractor responsibility. A critical requirement for all offerors is the disclosure of any planned use of Artificial Intelligence; those utilizing AI must submit a comprehensive AI Compliance and Risk Management Plan to ensure data privacy and adherence to federal civil rights laws. The contract also mandates strict compliance with Section 508 accessibility standards for all information and communication technology and requires the establishment of rigorous administrative and technical safeguards to protect sensitive government information.

Testing Laboratories and Services

POSTED

DEADLINE

ITASCA Software Technical Support and Maintenance ServicesThis subcontract, titled ITASCA Software Technical Support and Maintenance Services, is issued by the CDC Office of Acquisition Services under the Department of Health and Human Services. The contractor will provide technical support and software maintenance for the ITASCA software suite to assist prime contractors on CDC Pittsburgh Mining Research Division projects. Key deliverables include the provision of security updates, software patches, and technical support to ensure the suite remains compatible with various operating environments. To be eligible, the contractor must possess authorized support status from ITASCA and demonstrate expertise in numerical modeling for mining safety. The scope of work involves delivering timely support responses and version updates to researchers. The opportunity was posted on September 18, 2026, with a response deadline of September 22, 2026, falling under NAICS code 541519.

Other Computer Related Services

POSTED

DEADLINE

in about 14 hours

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS