Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Marine Engine Shop Load Testing Services

Active

State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Marine Engine Shop Load Testing Services involves performing standard commercial shop load testing for prime contractors working on Alaska Energy Authority projects. The scope of work requires conducting continuous eight-hour operation load tests at increments of one half, three quarters, full, and 110 percent of the rated load. Additionally, the contractor is responsible for performing electronic compression tests, cylinder misfire tests, and laboratory lube oil analysis utilizing a commercial engine load bank. The selected provider must deliver comprehensive documentation, including detailed load test reports, cylinder cutout results, and lube oil analysis reports. This opportunity is associated with the State of Alaska Department of Commerce, Community, and Economic Development under NAICS code 541380.

General Info

Subcontract for marine engine shop load testing and analysis for Alaska Energy Authority.

Agency

State of Alaska → Commerce, Community, and Economic Development

NAICS

541380 - Testing Laboratories and Services

Place of Performance

AK, USA

Set-Aside

NONE

Documents

This scope was carved out of 27022.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Akiak M&I Engine Purchase

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 15

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyState of Alaska → Commerce, Community, and Economic Development

ContactsNo contacts available

OfficeN/A

Organization / AgencyState of Alaska → Commerce, Community, and Economic Development

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs standard commercial shop load testing for prime contractors on Alaska Energy Authority projects. Conducts 8-hour continuous operation load tests at 1/2, 3/4, full, and 110% rated load. Performs cylinder misfire and electronic compression tests and laboratory lube oil analysis using a commercial engine load bank. Delivers load test reports, cylinder cutout results, and lube oil analysis reports.

Similar Contracts

Same NAICS industry code

Joliet Job Corps-Request for Quote Asbestos Testing & Abatement

Solicitation # Joliet JCC Asbestos Testing & Abatement

Management & Training Corporation (MTC) is seeking quotes for a fee-for-service subcontracting opportunity to provide asbestos testing and abatement services at the Joliet Job Corps center in Joliet, Illinois. The scope of work includes sampling and laboratory analysis of ceiling tiles in the Administration Academic Building and Welcome Center, as well as testing and potential removal of asbestos-containing material (ACM) floor tiles in the Warehouse, Warehouse Storage Area, and Gymnasium. The contractor is responsible for providing all labor, supervision, equipment, and materials, ensuring that all activities comply with federal, State of Illinois, OSHA, and EPA regulations. Key deliverables include a sampling plan, waste shipment records, disposal manifests from approved facilities, and a final project completion report. This solicitation is open to various small business set-asides, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. Interested offerors must submit a bid sheet, a completed supplier packet containing a W-9 and self-certification form, proof of insurance, and three professional references by 3:00 PM CT on October 21, 2026. Award selection will be based on best value as determined by MTC. The contract is subject to Service Contract Labor Standards and requires compliance with Department of Labor wage determinations for Grundy, Kendall, and Will counties. Additionally, subcontractors must possess a Unique Entity ID (UEI) and adhere to strict information security and privacy breach notification requirements.

Joliet Job Corps

POSTED

about 4 hours ago

DEADLINE

Sensor & Hardware Testing (Lab and Field)This subcontract involves providing comprehensive laboratory and field testing for weather sensors and data acquisition hardware in support of prime contractors for the NASA Shared Services Center. The scope of work includes executing tests for sensors and peripherals, supporting the verification and validation of integrated hardware and firmware, and providing fabrication support that meets specific quality certifications. The project is based in Orlando, Florida, and requires the delivery of detailed test reports and formal verification and validation certification documentation. Interested parties should note the solicitation timeline, with a response deadline set for October 20, 2026.

NASA Shared Services Center

POSTED

about 8 hours ago

DEADLINE

Avionics Testing and Quality Assurance Services

Ok DLA Aviation At Oklahoma City

POSTED

about 8 hours ago

DEADLINE

Ballistic Certification and Product Compliance Testing (PCT)

DLA Weapons Support

POSTED

about 8 hours ago

DEADLINE

in about 1 year

Underground Fuel Storage Tank CalibrationThis subcontract involves the precise measurement and calibration of underground fuel storage tanks for prime contractors working on Pakistan State Oil Company Limited projects. Specifically, the selected provider will perform volumetric or geometric calibration at the PSO 95 Riyasat and Sunshine sites to develop accurate dip-to-volume charts. The process requires the use of precision electronic dip tapes and volumetric pumps to ensure that factors such as tank tilt and shell deformation are fully accounted for in the final certified calibration tables. To be eligible for this engagement, contractors must maintain active NTN and GST registrations and demonstrate a zero-fatality safety record. The solicitation was posted on October 16, 2026, with a response deadline of October 22, 2026. This technical service falls under NAICS code 541380 and is managed by Pakistan State Oil Company Ltd.

Pakistan State Oil Company Ltd

POSTED

about 12 hours ago

DEADLINE

RFP RF-32061-AS (Calibration of Underground Fuel Storage Tanks at PSO 95 Riyasat and Sunshine in Lahore Division)

Solicitation # Doc341268442

Pakistan State Oil Company Limited is soliciting bids for the calibration of underground fuel storage tanks at two locations, PSO 95 Riyasat and Sunshine, within the Lahore Division. This procurement is conducted in accordance with PPRA Clause 42 b, with all bids and tender document requests required to be submitted electronically through the SAP Ariba portal. The deadline for bid submission is October 22, 2026, at 2:15 PM, with the bid opening scheduled for 2:30 PM on the same day. Eligible bidders must be active taxpayers and provide valid NTN and GST/PST certificates, along with the CNIC of the owner or authorized representative. To be considered, vendors must demonstrate adequate financial capabilities and relevant past experience, certify that they have not been blacklisted by any public or private entity, and confirm they have not been involved in any fatal accidents during project execution within the last two years. Requests for tender documents must include a signed and stamped request on the bidder's official letterhead. Conditional or partial proposals will be rejected.

Pakistan State Oil Company Ltd

POSTED

about 12 hours ago

DEADLINE

Solicitation # CUP 22-001

The French Hotel Project (CUP 22-001) involves the rehabilitation and development of a 70-room boutique luxury hotel on a 1.68-acre site located at 31861-31871 Camino Capistrano in San Juan Capistrano, California. The project consists of six buildings featuring a restaurant, event spaces, a fitness center, a pool area, a public gathering space, and on-site valet parking. A central component of the development is the restoration and rehabilitation of the Domingo Yorba and Casa Manuel Garcia Adobes, both of which are listed on the National Register of Historic Places, to be integrated as guest rooms and dining areas. The scope includes the demolition of existing barns and structural additions to the adobes, with materials intended for salvage and reuse. The project is subject to extensive environmental review under the California Environmental Quality Act (CEQA), with a Draft Environmental Impact Report identifying significant and unavoidable impacts related to transportation and vehicle miles traveled. Other technical assessments have addressed air quality, noise, biological resources, and geotechnical stability, including a Water Quality Management Plan to comply with NPDES Stormwater Program requirements. Construction is anticipated to last approximately 12 months, with demolition and site preparation scheduled for early 2026 and operations expected to begin in 2027. Key compliance requirements include ADA-accessible parking with EV charging, adherence to the California Noise Control Act, and the procurement of Caltrans encroachment permits for work within the right-of-way.

City of San Juan Capistrano

POSTED

about 13 hours ago

DEADLINE

First Article and Production Lot Testing ServicesThis subcontract opportunity is for the provision of First Article Testing and Production Lot Testing services to support prime contractors on DLA Weapons Support ASC projects. The selected provider will be responsible for conducting both destructive and non-destructive validation and verification testing within accredited laboratory facilities. Key requirements include the preparation of reports according to DI-NDTI-80809B and close coordination with DCMA QAR for witnessed testing events. Final deliverables consist of FAT and PLT reports, along with DD Form 1222 and DD Form 250. The project is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance located in Cherry Point. This is a total small business set-aside under NAICS code 541380. Interested parties must respond by October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Production Lot Testing and Quality Assurance ServicesThis subcontract for Production Lot Testing and Quality Assurance Services supports the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div. The selected provider will perform independent quality testing and validation for prime contractors, specifically executing Production Lot Tests using sampling plans aligned with MIL-STD-1916 or ASQ H1331. Key responsibilities include utilizing metrology and inspection equipment to verify material properties and TDP dimensions, with final deliverables consisting of lot acceptance certifications and detailed test reports. The project is based in Cherry Point, North Carolina, and falls under NAICS code 541380. To be eligible, contractors must maintain ISO 9001:2015 certification and meet CMMC Level 2 security requirements. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Critical Item Source Inspection and CertificationThe Critical Item Source Inspection and Certification subcontract involves providing independent quality assurance and source inspection services for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work focuses on verifying dimensional conformance of threads according to FED-STD-H28/20 and executing sampling plans based on MIL-STD-1916 or ASQ H1331. Additionally, the contractor is responsible for using precision gauging and measurement tools to ensure marking compliance with MIL-STD-129 and MIL-STD-130N, ultimately delivering detailed inspection reports and certificates of conformance. This project is categorized under NAICS code 541380 and will be performed in New Cumberland, Pennsylvania. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026. The contract is managed by the Department of Defense through the DLA Weapons Support ASC.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article Testing (FAT) & ValidationThis subcontract involves performing First Article Testing and validation for the Department of Defense DLA Weapons Support Fluid Handling Division. The scope of work requires the contractor to conduct in-process verification and final inspections on three units of NSN 4710-01-579-9880, utilizing precision metrology equipment to ensure all Technical Data Package tolerances are met. A formal First Article Test Report must be delivered within 20 calendar days of completion. To be eligible, the contractor must maintain ISO 9001:2015 certification and hold necessary ITAR and EAR authorizations. The opportunity was posted on October 15, 2026, with a response deadline of October 26, 2026, falling under NAICS code 541380.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Quality Assurance & Certification ServicesThis subcontract for Quality Assurance and Certification Services supports prime contractors on DLA Weapons Support ASC projects within the Department of Defense. The scope of work focuses on independent verification and certification, specifically executing sampling and inspection plans according to MIL-STD-1916 and MIL-STD-105/ASQ Z1.4. The primary objective is to ensure zero non-conformance for critical application items while validating bare item marking and supply chain traceability. The contract requires the delivery of detailed inspection reports and Certificates of Conformance. It is designated as a Total Small Business Set-Aside under NAICS code 541380. Interested parties should note the response deadline of October 29, 2026, for this requirement managed by the DLA Weapons Support ASC Supplier Oper AE and AF Div.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

More opportunities from State of Alaska → Commerce, Community, and Economic Development

Same awarding agency

Stainless Steel Exhaust Flex Connector FabricationThis subcontract involves the fabrication and supply of a custom stainless steel exhaust flex connector for prime contractors working on Alaska Energy Authority projects. The scope of work requires the production of a single, continuous 18-inch long flexible connector featuring a turbocharger mating connection at one end and a 5-inch ANSI 125/150# pattern flange at the other. The contractor is responsible for providing the completed assembly along with all necessary supporting hardware, including gaskets, bolts, v-clamps, and 90-degree elbows. This project is managed under the State of Alaska Department of Commerce, Community, and Economic Development and falls under NAICS code 332312.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Tier 3 Marine Diesel Engine SupplierThis subcontract, issued by the State of Alaska Department of Commerce, Community, and Economic Development, requires the supply of one new John Deere 6090 AFM 85 Tier 3 Marine engine. The engine is intended for prime contractors working on Alaska Energy Authority projects and must be specifically configured for generator drive applications. Technical specifications include 298 hp, 210 ekW prime, a 14 inch diameter flywheel, an SAE 1 adapter, and 24 VDC starting and control voltage. To meet compliance standards, the unit must be Tier 3 Marine certified and must not be equipped with EGR, DOC, DPF, or SCR emissions equipment. The successful supplier is responsible for the delivery of one complete engine FOB to Anchorage, Alaska. This procurement falls under NAICS code 423830.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Akiak M&I Engine Purchase

Solicitation # 27022

The Alaska Energy Authority is soliciting bids for the purchase of one 298 HP John Deere 6090 AFM 85 Tier 3 Marine engine, including all required modifications and accessories. The engine must be a new Tier 3 Marine certified unit and must not be equipped with EGR, DOC, DPF, or SCR emissions equipment. Key deliverables include a 18-inch stainless steel exhaust flex connector and a complete set of bound operation and maintenance manuals. As an additive alternate, bidders may provide an 8-hour shop load test with accompanying reports and analysis. The equipment is to be delivered FOB destination to the AEA Warehouse in Anchorage, Alaska. The award is based on the best net price, with a critical delivery requirement of no more than 12 calendar weeks after the contract award. Bidders must provide manufacturer data and catalog literature in a single PDF file, along with federal assurances. The fabricator must demonstrate extensive experience in packaging diesel engine driven electrical generators and maintain a competent service organization for field calls. Payment for the agreement will be made within 30 days of delivery or receipt of services. Compliance with the Davis-Bacon Act, the Americans with Disabilities Act, and specific Alaska state laws regarding consumer electrical products is required. This solicitation is exempt from Buy America Preferences for Infrastructure Projects.

Other Engine Equipment Manufacturing

POSTED

DEADLINE

CIPLINK COOK INLET POWER LINK-HVDC PROJECT- RFI

Solicitation # 27025

The State of Alaska, through the Alaska Energy Authority and the Department of Commerce, Community, and Economic Development, is seeking information and prequalification for the Cook Inlet Power Link High Voltage Direct Current Project. This solicitation focuses on identifying qualified parties capable of providing both the supply and installation of submarine cables. This process is intended strictly for procurement planning and information gathering to establish technical and budgetary pricing. It does not represent a formal invitation to bid or a commitment to enter into a contract, and the Alaska Energy Authority maintains the right to modify or cancel the request at its discretion.

Power and Communication Line and Related Structures Construction

POSTED

DEADLINE

Levelock & Hughes M&I Engine Generator & Accessories Purchase-RFQ

Solicitation # 26092

POSTED

DEADLINE

Actuarial Services

Solicitation # 223974

The State of Alaska, through the Department of Commerce, Community, and Economic Development, is soliciting proposals for professional actuarial services to support the Division of Insurance. This solicitation, identified by number 223974, seeks qualified actuarial firms capable of delivering a diverse range of specialized services to assist the agency in its regulatory and operational functions. The contract is designated for performance within the state of Alaska. Interested firms can find further details and submission guidelines through the official state procurement portal.

All Other Professional, Scientific, and Technical Services

POSTED

DEADLINE

Napaskiak Distribution Upgrade Project Project

Solicitation # 26081

POSTED

DEADLINE

Public Opinion and Policy Research services

Solicitation # AIDEA26-068

POSTED

DEADLINE

PROFESSIONAL ENGINEER REVIEW FOR THE ALASKA BROADBAND GRANT

Solicitation # 223852

The State of Alaska, through the Department of Commerce, Community, and Economic Development, has issued solicitation number 223852 for professional engineer review services related to the Alaska Broadband Grant. This state-level procurement seeks qualified engineering expertise to provide technical oversight and review for broadband initiatives within Alaska. The solicitation was posted on May 13, 2026, and specifies that the place of performance will be located within the state of Alaska. Interested parties can find further details and submission guidelines through the official State of Alaska online public notices portal.

Engineering Services

POSTED

DEADLINE

MKEC 2026 DERA Upgrade ITB

Solicitation # 26074

POSTED

DEADLINE

Special-Purpose Financial Statement Audit (BPMC Operating and Revenue Funds)

Offices of Certified Public Accountants

POSTED

DEADLINE

Bradley Lake Hydro Project Special Audit (IRFP)

Solicitation # 26080

The State of Alaska, through the Alaska Energy Authority, is soliciting proposals under IRFP No. 26080 for a contractor to perform a special-purpose financial statement audit of the operating and revenue funds for the Bradley Project Management Committee. The audit must be conducted in accordance with the accounting requirements established under the Alaska Energy Authority Power Revenue Bond Resolution. The selected contractor will be responsible for completing audit fieldwork by the first week of November each year and issuing the final audit report by the first week of December. Deliverables include seven hard copies and one electronic version of the final report. The initial contract term is for one year, beginning with the fiscal year ending June 30, 2026, with a performance period from September 2026 through December 31, 2026. There are options to renew for two additional one-year periods, for a total potential duration of three years. The estimated contract value ranges between 100,000 and 150,000 dollars. Proposals are due by May 29, 2026, at 2:00 pm Alaska Time and must include a specific proposal form and a letter not exceeding five pages. Requirements include workers compensation insurance and certification that the contractor is not debarred or suspended from federal transactions.

Offices of Certified Public Accountants

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS