Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Independent Testing Laboratory Services

Active

State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Independent Testing Laboratory Services involves providing third-party quality assurance testing for prime contractors working on Jacksonville Port Authority marine terminal projects. The scope of work focuses on critical material and structural integrity assessments, including concrete sampling and testing conducted in accordance with ASTM C31, C39, and C109 standards. Additionally, the contractor is responsible for verifying electrical continuity and steel-to-concrete potentials, as well as performing Protected Structure Potential Surveys. The final deliverables for these services include the provision of certified test reports and comprehensive survey data to ensure project compliance and quality.

General Info

Subcontract for third-party quality assurance and material testing for Jacksonville Port Authority projects.

Agency

Florida → Jacksonville Port Authority

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of ITB C-2131.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TALLEYRAND MARINE TERMINAL (TMT) PILE, CAP, AND BEAM REHAB

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 15

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyFlorida → Jacksonville Port Authority

ContactsNo contacts available

OfficeN/A

Organization / AgencyFlorida → Jacksonville Port Authority

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs third-party quality assurance testing for prime contractors on JAXPORT marine terminal projects. Conducts concrete sampling and testing per ASTM C31, C39, and C109. Verifies electrical continuity and steel-to-concrete potentials. Performs Protected Structure Potential Surveys. Delivers certified test reports and survey data.

Similar Contracts

Same NAICS industry code

Third-Party Quality Inspection and SamplingThis subcontract for Third-Party Quality Inspection and Sampling supports the Department of Defense through the DLA Weapons Support Fluid Handling Division. The selected provider will perform independent sampling and inspection for prime contractors specifically for the 4820-01-223-8097 valve. Work involves executing sampling plans according to MIL-STD-1916 or ASQ H1331 standards to verify critical, major, and minor attributes using zero-based sampling plans, precision measurement, and pressure testing equipment. The project is designated as a Total Small Business Set-Aside under NAICS code 541380, with performance taking place in Jacksonville, Florida. The contractor is responsible for delivering comprehensive inspection reports and certifications of conformance. The solicitation was posted on October 16, 2026, with a response deadline of October 22, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 10 hours ago

DEADLINE

Aerospace NDT and Heat TreatmentThis subcontract for the Defense Logistics Agency involves providing specialized material validation, heat treatment, and non-destructive testing services for aircraft trainer pod projects. The scope of work focuses on ensuring structural integrity through critical processes including X-ray and penetrant inspections, with a requirement for the delivery of certified test reports and detailed heat-treatment logs. Qualified providers must maintain aerospace testing certifications and strictly adhere to ITAR and EAR compliance standards. The project falls under NAICS code 541380 and is managed through the Department of Defense to support prime contractors in meeting rigorous aerospace safety and quality specifications.

Defense Logistics Agency

POSTED

about 10 hours ago

DEADLINE

Third-Party Aerospace Quality Testing and CertificationThis subcontract for Third-Party Aerospace Quality Testing and Certification supports prime contractors on DLA Weapons Support ASC projects. The selected provider will perform independent quality testing and verification, utilizing sampling methods per MIL-STD-1916 or ASQ H1331 and executing tests defined in QAP I3873 QAP-020. All work must be conducted using calibrated M&TE per RT001, with final deliverables consisting of detailed test reports and certifications of compliance. To be eligible, the contractor must hold ISO/IEC 17025 accreditation and maintain CMMC Level 2 certification for the secure handling of technical data. This opportunity falls under NAICS code 541380 and is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

Third-Party Testing and Certification for Critical Application SeatsThis subcontract involves providing independent testing and validation services for critical application seats supporting the Department of Defense DLA Weapons Support ASC Supplier OEM Division. The scope of work requires the performance of First Article Testing and production lot sampling in strict accordance with MIL-STD-1916 or ASQ H1331 standards. To ensure rigorous safety compliance, the contractor must utilize stress analysis and load testing rigs, ultimately delivering certified inspection certificates and detailed test reports. The opportunity is categorized under NAICS code 541380 and was posted on October 16, 2026. Interested parties must submit their responses by the deadline of October 23, 2026. This effort focuses on ensuring that critical components meet all necessary safety and performance specifications through third-party certification.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 10 hours ago

DEADLINE

Joliet Job Corps-Request for Quote Asbestos Testing & Abatement

Solicitation # Joliet JCC Asbestos Testing & Abatement

Management & Training Corporation is seeking quotes for a fee-for-service subcontract to provide asbestos testing and abatement services at the Joliet Job Corps center in Joliet, Illinois. The scope of work includes sampling and laboratory analysis of ceiling tiles in the Administration Academic Building and Welcome Center, as well as testing and potential removal of asbestos-containing material from floor tiles in the Gymnasium, Warehouse, and Warehouse Storage Area, totaling approximately 4,200 square feet. All work must be performed by licensed professionals using accredited laboratories and must comply with federal, State of Illinois, OSHA, and EPA regulations. Key deliverables include a sampling plan, waste shipment records, disposal manifests, and a final project completion report. This opportunity is open to small businesses, including certified VOSB, SDVOSB, WOSB, and HUBZone entities, under NAICS code 541380. Bidders must submit a completed bid sheet, a supplier packet containing a W-9 and self-certification, proof of insurance, and three professional references by October 21, 2026. Award will be based on best value as determined by MTC. The contract is subject to Service Contract Labor Standards, specifically Wage Determination No. 2015-5019 Rev. 31, and incorporates various FAR clauses regarding small business utilization, equal opportunity, and the protection of sensitive government information. Invoicing is to be submitted on a weekly or bi-weekly basis.

Joliet Job Corps

POSTED

about 11 hours ago

DEADLINE

SCDOT Certified Level 1 InspectionThis subcontract opportunity is for the provision of independent third-party quality assurance and inspection services for prime contractors working on Beaufort County Engineering road projects. The selected provider will be responsible for monitoring asphalt placement, verifying temperatures, and managing load tickets in strict accordance with SCDOT procedures. To ensure compliance and technical accuracy, the contractor must employ an SCDOT Certified Level 1 Inspector who will deliver weekly inspection reports and certified quality documentation. The solicitation was posted on October 16, 2026, with a response deadline of November 17, 2026. Falling under NAICS code 541380, this project is managed by the Engineering department of South Carolina. Interested parties can find further details and submission guidelines through the official procurement portal.

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Geotechnical Vibration MonitoringThis subcontract for Geotechnical Vibration Monitoring involves providing specialized monitoring services for prime contractors working on roadway projects within the City of New Smyrna Beach. The primary objective is to monitor existing structures during the construction process to maintain stability and ensure strict compliance with established geotechnical standards. The selected provider will be responsible for delivering detailed vibration monitoring reports to document these findings. The opportunity is categorized under NAICS code 541380 and is managed by the Purchasing agency for the state of Florida. Interested parties should note that the solicitation was posted on October 16, 2026, with a response deadline set for January 13, 2027.

POSTED

about 15 hours ago

DEADLINE

Metallurgical and Mechanical Testing for Special Emphasis FastenersThis subcontract for the Department of Defense, specifically Navsup Weapon Systems Support Mech, involves providing metallurgical and mechanical testing for special emphasis fasteners. The selected contractor will perform quantitative chemical and mechanical analysis, including thread verification per FED-STD-H28, production lot destructive testing, and Liquid Penetrant or Magnetic Particle inspections. The primary objective is to support prime contractors on shipboard projects through the delivery of detailed test reports and certifications for every heat or lot processed. To qualify for this engagement, contractors must maintain rigorous quality standards, including ISO/IEC 17025, ISO 10012, and ANSI/NCSL Z540.3 certifications. The opportunity falls under NAICS code 541380. Interested parties must submit their responses by the deadline of November 5, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 15 hours ago

DEADLINE

Production Lot Destructive Testing for Shipboard NutsThis subcontract involves performing destructive testing on production lots of shipboard nuts for prime contractors supporting Navsup Weapon Systems Support Mech projects. The scope of work focuses on material integrity validation for Special Emphasis Level I hardware, utilizing tensile, hardness, or shear testing in strict accordance with the Technical Data Package. The selected provider must maintain ISO/IEC 17025 laboratory accreditation to ensure testing standards are met. Key deliverables include the submission of formal test reports and the final certification regarding the acceptance or rejection of each production lot. This opportunity is categorized under NAICS code 541380 and is managed by the Department of Defense.

Navsup Weapon Systems Support Mech

POSTED

about 15 hours ago

DEADLINE

Destructive Testing for Naval Electrical ComponentsThis subcontract for the Department of Defense involves performing destructive First Article Testing for prime contractors on Navsup Weapon Systems Support Mech shipboard projects. The selected provider will execute government-mandated testing to failure using electrical overload, compression, and tension equipment to ensure structural and electrical integrity in accordance with TDP O04 specifications. The contractor must hold the necessary laboratory accreditation for military-grade destructive testing and is responsible for delivering a certified Test Report for government approval. This opportunity falls under NAICS code 541380, with a response deadline set for October 30, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 15 hours ago

DEADLINE

Specialized Non-Destructive Testing (NDT) for Critical Shipboard ComponentsThis subcontract involves providing specialized Non-Destructive Testing (NDT) services for the Department of Defense, specifically supporting NAVSUP Weapon Systems Support. The primary objective is to ensure the structural integrity of new or refurbished ball kit components through the execution of X-ray, Ultrasonic, Magnetic Particle, and Dye Penetrant procedures in accordance with TDP O08. To qualify, the contractor must utilize NAS 410 certified technicians and obtain DCMA QAR approval for all NDT procedures. Key deliverables for this engagement include detailed NDT Inspection Reports and a Certification of Compliance. The opportunity is categorized under NAICS code 541380, with a response deadline set for November 16, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 15 hours ago

DEADLINE

in about 1 month

NDT Inspection and Material Traceability CertificationThis subcontract for NDT Inspection and Material Traceability Certification supports prime contractors on NAVSUP Weapon Systems Support projects within the Department of Defense. The selected provider will perform comprehensive non-destructive testing to verify material integrity, utilizing ultrasonic equipment, magnetic particle testing, and dye penetrant methods to conduct 100 percent inspections of material verification data. To ensure technical compliance, the contractor must maintain ISO/IEC 17025 accreditation and adhere to ANSI/NCSL Z540.3 standards. Key deliverables include NDT inspection reports, Objective Quality Evidence, and material certification test reports. The response deadline for this opportunity is November 13, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 15 hours ago

DEADLINE

More opportunities from Florida → Jacksonville Port Authority

Same awarding agency

Critical Crane Structural RepairsThis subcontract for the Jacksonville Port Authority involves performing critical structural steel repairs on crane frames at JAXPORT marine terminals. The selected contractor will be responsible for executing specialized welding and fabrication tasks to restore structural integrity as specified in the provided contract drawings. To ensure the quality and safety of the repairs, the project requires the use of industrial welding equipment and personnel who are AWS certified. The final deliverable consists of certified structural repairs to the crane frames, falling under NAICS code 238120.

Structural Steel and Precast Concrete Contractors

POSTED

about 23 hours ago

DEADLINE

Crane Corrosion Repair and Industrial PaintingThis subcontract for the Jacksonville Port Authority involves specialized corrosion removal and industrial painting services for marine terminal projects. The scope of work includes spot corrosion removal, painting of galvanized steel surfaces, and general crane painting. To ensure environmental compliance and quality, the contractor must utilize wet abrasive blasting with full containment systems for the proper disposal of paint chips. The successful provider is responsible for delivering a fully prepped and painted crane structure that meets all project specifications. Due to the technical nature of the work, personnel are required to hold SSPC or NACE certifications. This project falls under NAICS code 238320 and is designed to support prime contractors operating within the JAXPORT facilities.

Painting and Wall Covering Contractors

POSTED

about 23 hours ago

DEADLINE

Trolley Rail and Festoon System InstallationThis subcontract involves the installation of trolley rail and festoon systems for prime contractors at Jacksonville Port Authority marine terminal projects. The scope of work includes the removal of existing rails and festoon systems, the installation of new rails provided by JAXPORT, the extension of the festoon railway by three feet, and the installation of necessary railway brackets. The contractor is responsible for the complete wiring, testing, and commissioning of the new festoon system to ensure it is fully operational. This project falls under NAICS code 238210 and is managed through the Jacksonville Port Authority in Florida.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 23 hours ago

DEADLINE

Crane Roll-Back and Re-installationThis subcontract involves the physical relocation and subsequent re-installation of Hanjung Crane #8841 at the Jacksonville Port Authority marine terminal. The scope of work requires the contractor to roll the crane from active dock tracks to a designated service area to facilitate refurbishment and then return it to operational gantry rails once repairs are complete. To ensure a safe and successful transfer, the contractor is responsible for developing a comprehensive lifting and rigging plan and utilizing industrial jacks and heavy-duty rigging equipment. The primary objective is the precise positioning of the crane for maintenance and its eventual return to full operational status.

Motor Vehicle Towing

POSTED

about 23 hours ago

DEADLINE

Independent Concrete TestingThis subcontract involves providing certified independent concrete strength and quality testing for prime contractors working on Jacksonville Port Authority marine terminal projects. The selected agency will be responsible for sampling concrete batches and performing compression testing on cylinders at 7, 14, and 28-day intervals using specialized molds and machinery to ensure structural integrity. To qualify, the provider must be a certified independent local testing agency with no conflicts of interest. The primary deliverable for this engagement is the submission of certified concrete test reports. This opportunity falls under NAICS code 541380 and is associated with the Jacksonville Port Authority in Florida.

Testing Laboratories and Services

POSTED

about 23 hours ago

DEADLINE

Concrete Placement and FinishingThis subcontract for Concrete Placement and Finishing involves the installation of stow pin sockets and the execution of concrete pouring for prime contractors at Jacksonville Port Authority marine terminal projects. The scope of work specifically requires setting fabricated sockets and pouring and finishing concrete surfaces at Ft Markers 1565 and 1720 in strict accordance with ASTM standards. The contractor is responsible for providing all necessary concrete mixing and finishing equipment to complete the project. The final deliverable consists of eight installed and encased stow pin sockets with professionally finished concrete surfaces. This project falls under NAICS code 238110 and is associated with the Jacksonville Port Authority in Florida.

Poured Concrete Foundation and Structure Contractors

POSTED

about 23 hours ago

DEADLINE

Concrete Drilling and ReinforcementThis subcontract for Concrete Drilling and Reinforcement involves providing specialized services for prime contractors on marine terminal projects at the Jacksonville Port Authority in Florida. The scope of work includes drilling into existing wharf concrete, installing dowels, fabricating and placing rebar, and utilizing mechanical couplers with concrete drilling rigs and epoxy anchoring adhesives. The primary objective is to deliver a prepared and reinforced concrete base that is ready for socket installation. All operations must be performed in strict compliance with OSHA 29 CFR 1926 safety standards. The project falls under NAICS code 238110 and is managed through the Jacksonville Port Authority procurement process.

Poured Concrete Foundation and Structure Contractors

POSTED

about 23 hours ago

DEADLINE

Metal Fabrication (Sockets and Covers)This subcontract involves the custom fabrication of metal stow pin sockets and covers for prime contractors working on marine terminal projects at the Jacksonville Port Authority. The selected provider must manufacture all components in strict accordance with structural welding codes and the specific technical drawings provided in the TMT Installation of New Crane Stow Pin series. The contractor is required to possess the necessary structural steel fabrication equipment and welding machinery to complete the work. Responsibilities include the full fabrication process and the final delivery of the completed sockets and covers directly to the designated job site.

Fabricated Structural Metal Manufacturing

POSTED

about 23 hours ago

DEADLINE

BLOUNT ISLAND MARINE TERMINAL HANJUNG CRANE #8841 REFURBISHMENT

Solicitation # ITB_EQ-2039A

The Jacksonville Port Authority (JAXPORT) is soliciting bids under contract ITB_EQ-2039A for the refurbishment of Hanjung Crane #8841 at the Blount Island Marine Terminal. The scope of work includes rolling back the crane to a designated service area, replacing the trolley rail system using JAXPORT-provided materials, performing critical structural repairs, and executing comprehensive painting and corrosion removal. The project must be completed within 90 calendar days from the Notice to Proceed. Award will be based on the lowest price consistent with specifications, subject to a responsibility determination evaluating the contractor's financial standing, experience, and organizational capacity. Bids must be submitted electronically via OpenGov by 2:00 PM ET on November 17, 2026. A pre-bid conference and site visit are scheduled for October 28, 2026, with a deadline for questions on November 2, 2026. Key contractual requirements include a mandatory 5% Small and Emerging Business (SEB) participation goal, 100% performance and statutory payment bonds, and a 5% bid security. Contractors are restricted from subcontracting more than 25% of the total jobsite work without approval. Personnel must undergo mandatory security and safety training, and all on-site vehicles must be clearly identified. Payment will be processed through E-Builder, with mobilization and demobilization paid at 60% and 40% respectively.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 23 hours ago

DEADLINE

in about 1 month

INTSALLATION OF NEW CRANE STOW PIN SOCKETS AT THE TALLEYRAND MARINE TERMINAL (TMT)

Solicitation # ITB_MC-2132

The Jacksonville Port Authority (JAXPORT) is soliciting bids under contract ITB_MC-2132 for the installation of two new sets of stow pin sockets to secure dockside gantry cranes at the Talleyrand Marine Terminal. The project involves installing four sockets each at foot markers 1565 (Berth 7) and 1720 (Berth 6). The selected contractor must provide all labor, materials, equipment, and supervision, with a required completion timeline of 90 calendar days following the Notice to Proceed. Key deliverables include concrete testing via certified independent agencies and the submission of a jobsite-specific electronic safety manual. The work must adhere to strict technical standards, including OSHA 29 CFR regulations and specific ASTM and structural welding codes. Bids must be submitted electronically in PDF format via OpenGov by 2:00 PM ET on November 18, 2026. A mandatory pre-bid conference and site visit are scheduled for October 29, 2026. The contract will be awarded to the lowest responsive responsible bidder based on the total bid amount for five specific line items, including mobilization, metal fabrication, and concrete finishing. Bidders must provide a bid security of 5 percent of the bid amount and certify they are not controlled by a foreign country of concern. Administrative requirements include the use of E-Builder for invoicing, compliance with GAAP accounting practices, and mandatory security and safety training for all personnel working on the JAXPORT job site.

All Other Specialty Trade Contractors

POSTED

about 23 hours ago

DEADLINE

in about 1 month

CPS Commissioning & Long-Term MonitoringThe CPS Commissioning and Long-Term Monitoring subcontract involves providing final commissioning and warranty testing services for prime contractors operating on JAXPORT marine terminal projects. The scope of work focuses on performance verification, requiring the execution of surveys at six and twelve months following installation, as well as a Final Potential Survey. The selected provider is responsible for delivering comprehensive commissioning and final survey reports to ensure all standards are met. To qualify for this engagement, personnel must hold a NACE Cathodic Protection Technician (CP2) or Specialist (CP4) certification. This project falls under NAICS code 238110 and is managed by the Jacksonville Port Authority in Florida.

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE

Marine Grout & Concrete PlacementThis subcontract for Marine Grout and Concrete Placement involves providing specialized underwater repair mortar for prime contractors operating on Jacksonville Port Authority marine terminal projects. The scope of work focuses on the placement of non-shrink, CPS-compatible cementitious grout into pile jackets to ensure the proper encapsulation of anodes and reinforcing materials. The contractor is responsible for removing any excess material deposited outside the jackets to deliver fully encapsulated and cured concrete pile repairs. This project falls under NAICS code 327320 and is centered on critical infrastructure maintenance within the Florida port system.

Ready-Mix Concrete Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS