Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Marking and Labeling Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, issued by the Defense Logistics Agency under the Department of Defense, focuses on the provision of marking and labeling services for shipping and storage containers. The primary objective is to ensure that all containers are equipped with bar-coding and maintain strict hazard communication standard compliance. The scope of work requires adherence to MIL-STD-129 and 29 CFR 1910.1200 regulations to ensure safety and logistical efficiency. Classified under NAICS code 323111, the contract was posted on August 10, 2026, to standardize the identification and handling of materials within the agency's supply chain.

General Info

DLA subcontract for container marking and labeling services ensuring bar-coding and hazard compliance.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

323111 - Commercial Printing (except Screen and Books)View NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-R-X909.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICA

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 10

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Marking and labeling of shipping and storage containers with bar-coding and hazard communication standard compliance per MIL-STD-129 and 29 CFR 1910.1200.

Similar Contracts

Same NAICS industry code

Solicitation # SPE8E6-26-T-4407

Solicitation SPE8E6-26-T-4407 is a fixed-price request for quotations issued by the Defense Logistics Agency Troop Support for the procurement of four decals, identified by NSN 7690012629486 and Boeing part number BACM9L10AVM. This acquisition is an FMS requirement for Greece, with a rapid delivery schedule of five days after receipt of order. The items are designated as Type I (Code M) with a non-extendable shelf life of 24 months. Delivery, inspection, and acceptance are all set as FOB Origin, with the final destination located in Mechanicsburg, Pennsylvania. The contract mandates strict adherence to technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking and shelf-life labeling. Palletization must comply with DLA packaging requirements (RP001), and the use of plastics for wrapping or cushioning should be avoided where possible. Administrative requirements include electronic invoicing and receiving reports via the Wide Area WorkFlow system. The solicitation also incorporates various FAR and DFARS clauses regarding cybersecurity, domestic material restrictions under the Buy American Act, and the prohibition of covered defense telecommunications equipment.

Defense Logistics Agency

POSTED

DEADLINE

2027 Recycling Calendars Printing & Mailing

Solicitation # 12492

The City of Greensboro is soliciting bids for the printing and mailing of approximately 80,000 to 82,000 two-sided color folded postcards for the 2027 Recycling Calendars. The scope of work requires the production of 40,000 red and 40,000 blue calendars on 80# matte cover stock, which must be sealed using fugitive glue or wafer seals to comply with USPS automation mailing regulations. The selected contractor is responsible for processing the mailing lists to achieve the best USPS Marketing Mail rates, including NCOA and Class certification, and ensuring all materials are mailed from a Greensboro USPS location by December 4, 2026. Any extra unaddressed postcards must be delivered to the Solid Waste and Recycling Department at 401 Patton Avenue. The contract will be awarded to the lowest responsive and responsible bidder. Interested companies must submit their responses via the Greensboro eProcurement System by September 24, 2026, at 2:00 PM EST. Required submission materials include a statement of qualifications, three professional references, a copy of the company's NCOA license, a sample of similar work, and a bid form covering printing, processing, and postage costs. Bidders must also provide a statement confirming the bid remains valid for three months and acknowledge all RFB addenda. The City's Local Preference Policy may be applied to support businesses within the Guilford County Economic Development Alliance area, and all submissions are subject to North Carolina Public Records laws.

City of Greensboro

POSTED

DEADLINE

Postcard Printing Services

Department of Driver Services

POSTED

DEADLINE

POSTCARD PRINTING, MAILING AND FULFILLMENT

Solicitation # 47500-eRFQ-001991-2027

The Georgia Department of Driver Services is soliciting quotes under solicitation number 47500-eRFQ-001991-2027 to establish a contract for postcard printing, mailing, and fulfillment services. The solicitation opened on September 11, 2026, with a response deadline of September 19, 2026. The contract features an initial one-year term from the date of award, with the agency retaining four optional one-year renewals at its sole discretion. Qualified suppliers must demonstrate a minimum of five years of experience and provide detailed client references. Evaluation criteria include cost, supplier responsibility, tax compliance, and the submission of a bid bond. Applicants must disclose any business litigation from the past five years and any history of suspension or debarment from government contracting. Preference is given to suppliers domiciled in the State of Georgia. All responses, including the required cost worksheet and tax compliance forms, must be submitted through the GA@WORK Marketplace.

Department of Driver Services

POSTED

DEADLINE

Secure Card Manufacturing & Personalization

POSTED

DEADLINE

in about 2 months

Card Production and Image Capture Services Provider

Solicitation # rfxx_20330

The Government of Ontario Ministry of Transportation is seeking a Card Production and Image Capture Services Provider under solicitation rfxx_20330. The scope of work encompasses the full lifecycle of end-to-end services, including image capture, secure card design, production, personalization, quality assurance, and distribution. The contract is structured around three primary categories of requirements: operational expectations for day-to-day service delivery, transition obligations for the assumption and transfer of services, and a governance model for oversight and accountability. The provider must manage sensitive personal and health information within a secure environment and adhere to strict quality and biometric standards, including ISO/IEC 14298-2021, ISO/IEC 7810, and AAMVA specifications. The selection process is based on a Best Score strategy across four stages. Stage 2 evaluates technical requirements, focusing on core production capabilities, supply chain security, and business responsiveness. Stage 3 involves demonstrations of image capture and card production use cases, requiring a minimum score of 75 percent to proceed. Stage 4 evaluates the commercial response using a relative pricing formula, with a price outlier rule that awards zero points if a bid exceeds the median price by more than 50 percent. The successful vendor must demonstrate experience in high-volume, secure public service environments, maintain a Canada-based operational footprint, and comply with Ontario's occupational health and safety and tax regulations. Delivery of produced cards is to be handled via Canada Post or other approved providers.

POSTED

DEADLINE

in about 2 months

Commercial Printing - Multi-page Booklets

POSTED

DEADLINE

Commercial Printing - Marketing Collateral

POSTED

DEADLINE

ODP Printing Services

Solicitation # 1368

The State of Idaho, on behalf of the Office of Drug Policy, is soliciting bids under ITB 1368 for a qualified firm to provide ongoing, as-needed marketing, administrative, and operational printing services. The scope of work includes the production of various materials such as trifold and half-fold brochures, rack cards, four-page booklets, stickers in multiple shapes and sizes, flyers, magnets, folders, posters, retractable banners, wall clings, and table tents. Deliverables must be shipped F.O.B. Destination to specified locations, including the Idaho RADAR Center and the Office of Drug Policy in Boise. The contractor must be able to process print files in formats including PDF, AI, INDD, PSD, JPEG/JPG, PNG, and TIFF, and may be required to print materials in English, Spanish, or both. The contract will be issued as a Blanket Purchase Order with prices remaining firm for the initial year, after which adjustments may be considered twice annually. Award will be granted to the lowest responsible bidder, with a 10 percent cost preference applied during evaluation for services produced within the State of Idaho. Mandatory requirements include a one-year warranty on all printed materials, a maximum production overrun of 10 percent, and strict adherence to packaging specifications for booklets and stickers. Contractors must maintain comprehensive insurance coverage, including Commercial General Liability of 1 million dollars per occurrence and 2 million dollars aggregate, and provide certificates of insurance within five business days of the award. Bidders must also certify compliance with equal employment regulations, legal work status, and specific state codes regarding the boycott of Israel and ownership by the government of China.

POSTED

DEADLINE

Textbook Printing and Physical Production

FA3300 42 Cons Cc

POSTED

DEADLINE

Printing and Document Finishing Services

Washington Headquarters Services

POSTED

DEADLINE

Pub10050LSMedicareandYou2027LargePrintSpanish

Solicitation # Pub10050LSMedicareandYou2027LargePrintSpanish451846R1(2026)

The United States Government Publishing Office, specifically the Customer Services agency in Washington, DC, is soliciting bids for the production of the 2027 Large Print Spanish edition of Medicare and You. This combined contract requires comprehensive services including desktop publishing, proofing, 4 color printing at Quality Level III, binding, and shipping or mailing to various destinations. Interested parties must submit their responses by September 14, 2026. The project falls under NAICS code 323111 and is managed by primary point of contact Carey Joseph. Detailed specifications for this production requirement are available through the official GPO vendor portal.

Customer Services

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Storage Battery Supplier (NSN 6140-01-631-1794)

Battery Manufacturing

POSTED

DEADLINE

Storage Battery Supplier (NSN 6140-01-624-9682)

Battery Manufacturing

POSTED

DEADLINE

Military-Grade Packaging and Palletization Services

Packaging and Labeling Services

POSTED

DEADLINE

Supply of Uninterruptible Power Supplies (UPS)

Motor and Generator Manufacturing

POSTED

DEADLINE

Storage Battery Supplier (NSN 6140-21-913-9828)

Battery Manufacturing

POSTED

DEADLINE

MIL-SPEC Packaging and Hazardous Material Shipping

Freight Transportation Arrangement

POSTED

DEADLINE

Supply of Battery Assembly (6140-01-664-6369)

Storage Battery Manufacturing

POSTED

DEADLINE

Supply of Sediment Strainer (NSN 4730-01-589-9155)

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

DEADLINE

Supply of Schneider Electric Storage Battery (APC)

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2418

Solicitation SPE7L7-26-Q-2418 is a firm-fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for the procurement of sealed lead acid storage batteries, identified by NSN 6140-01-624-9682. The requirement consists of two line items totaling eight units, with two units for item 0001 and six units for item 0002. Approved sources include EnerSys Delaware Inc. (part numbers ODS-AGM6M or PC2250) and Stored Energy Products, Inc. (part number PC2250). These items are designated as critical application items and are restricted source items requiring engineering source approval by the government design control activity. The batteries are classified as Type I (Code H) with a non-extendable shelf life of 12 months. Delivery is required within 60 days after receipt of the order, with shipping terms set as FOB Destination. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001, while hazardous materials must be handled according to IP025 and FAR 52.223-3. Quality assurance will be managed through destination inspection and acceptance using sampling methods such as MIL-STD-1916 or ASQ H1331. Award will be based on cost alone for quotes that conform to the solicitation requirements. Quotations must be submitted by September 21, 2026, and payment will be processed electronically via the Wide Area WorkFlow system.

Battery Manufacturing

POSTED

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2422

Solicitation SPE7L7-26-Q-2422 is a firm-fixed-price request for the procurement of one maintenance-free sealed lead-acid storage battery, identified as Schneider Electric IT Corporation part number APCRBC133 (NSN 6140-01-614-1949). The item is designated as Type I (Code H) with a non-extendable shelf life of 12 months. Delivery is required within 60 days after the order is placed, with inspection and acceptance occurring at the origin. The shipment is destined for the USS Harvey C Barnum Jr (DDG 124). The contract mandates strict adherence to quality and safety standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Because the item is a battery, it must comply with 49 CFR regulations for nonspillable batteries, requiring specific outer packaging, terminal protection, and durable nonspillable marking. Additionally, the contractor must comply with NAVSEA 5100-003D regarding mercury restrictions and provide a Certificate of Conformance. Sampling will be conducted per MIL-STD-1916 or ASQ H1331. Award will be based on the offeror's conformance to solicitation requirements and their ability to meet the specified technical and quality standards.

Battery Manufacturing

POSTED

DEADLINE

STRAINER, SEDIMENT

Solicitation # SPE7L7-26-Q-2420

The Defense Logistics Agency Land and Maritime has issued solicitation SPE7L7-26-Q-2420 for the procurement of one sediment strainer, identified by NSN 4730-01-589-9155. This is a firm fixed price contract with a required delivery date of 60 days after receipt of order. The item is to be delivered to the USS Michael Monsoor DDG 1001, with both inspection and acceptance occurring at the destination. Quotations must be submitted by September 21, 2026, and must remain valid for 90 days. Technical compliance requires adherence to TDP Rev C Gen 3 and basic drawing 80064 841499 Revision L. The contract mandates strict environmental and quality standards, including the prohibition of intentionally added mercury and class I ozone depleting chemicals. Packaging must comply with ASTM D3951 and MIL-STD-129, though the DLA Master List of Technical and Quality Requirements takes precedence. Palletization must follow RP001 guidelines. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment, and compliance with DFARS cybersecurity and Buy American certifications.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS