Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

MAS SHIELD KIT, SPEC

Active
SPE1C1-26-T-1548Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of one unit of the MAS SHIELD KIT, specified by part number 05D12001-2 and NSN 8415015940416, designated for use in medium/large and x-large wide cages. The item is to be delivered within 20 days to the Marine Aviation Logistics Squadron 39 at Camp Pendleton, California, under FOB destination terms with no variance allowed in quantity. Packaging must comply with either Fed-Std-313 for hazardous materials per TQ requirement IP025 or ASTM D3951 for non-hazardous items, with DLA technical requirements taking precedence. Packaging and labeling must conform to MIL-STD-129, and palletization must follow DLA requirement RP001. Delivery is to be shipped by the fastest traceable means, explicitly excluding parcel post, with the freight address specified as Bldg 23122, Supply Circle, Camp Pendleton. The shipment is tied to RDD 777 and project BK1 TP 2, with an original required delivery date of July 17, 2026. The contract number is SPE1C1-26-T-1548, issued by the Department of Defense through C and T Supply Chain, with primary point of contact Jennifer Scarpello at safetyprotection@dla.mil.

General Info

Procure one MAS SHIELD KIT, part 05D12001-2, deliver to Camp Pendleton by July 17, 2026, under FOB destination, per MIL-STD-129 and DLA specs.

Agency

Department Of Defense → C AND T SUPPLY CHAINView Agency

NAICS

315210 - Cut and Sew Apparel ContractorsView NAICS

Place of Performance

PO BOX 555761, CAMP PENDLETON, CA, 92055-5761, US

Set-Aside

NONE

Documents

(1)

SPE1C1-26-T-1548.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → C AND T SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → C AND T SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Jennifer Scarpello
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
MAS SHIELD KIT,SPEC
MAS SHIELD KIT,SPEC
Medium/Large Cage 97427 PN 05D12001-3 X-LARGE/X-LARGE WIDE Cage 97427 PN 05D12001-2 NSNs 8415015940415 8415015940416
GENTEX CORPORATION 97427 P/N 05D12001-2
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017499768 0001 EA 1.000
NSN/MATERIAL:8415015940416
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
R09808
MARINE AVIATION LOGISTICS SQDN 39
MALS-39 MAG-39 3D MAW
PO BOX 555761
CAMP PENDLETON CA 92055-5761
US
SPE1C1-26-T-1548
SECTION B
PR: 7017499768 PRLI: 0001 CONT’D
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
R09808
MARINE AVIATION LOGISTICS SQDN 39
MALS-39 SUPPLY MAG-39 3D MAW
BLDG 23122 SUPPLY CIRCLE
CAMP PENDLETON CA 92055-5761
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) R0980861942413
RDD: 777
PROJ: BK1 TP 2
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: 9B ADV: FC: 7L
Need Ship Date:00/00/0000 Original Required Delivery Date:07/17/2026
SPE1C1-26-T-1548 NSN/Part Number: 8415-01-594-0416 Quantity: 1 EA Purchase Request: 7017499768QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 315210
New
Federal
MIL-DTL-82122E_Spec_ReviewThe Marine Corps Systems Command is seeking industry feedback on Draft MIL-DTL-82122E, which establishes specifications for the Women’s Evening Dress Jacket intended for officers and staff noncommissioned officers. This document falls under Federal Supply Code 8410 and is classified under NAICS code 315210, indicating apparel manufacturing as the relevant industry sector. The notice explicitly states this is not a solicitation for procurement but rather a formal request for comments to shape the final standard, with the goal of promoting flexible design and production approaches through broad stakeholder input. All feedback must be submitted using the Consolidated Comments Form and emailed to USMC_STDZ@usmc.mil no later than August 22, 2026, with the subject line referencing the document number for proper processing. The finalized version of the specification will be published on ASSIST Online following review and adjudication of all submitted comments. The place of performance is listed as Natick, Massachusetts, with the issuing office located at Quantico, Virginia.
Marcor Syscom

POSTED

about 13 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 315210
New
DIBBS
Supply of Protective Dust and Moisture Boots (NSN 5340014255409)
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 315210
New
International
Supply of Men’s UniformsThe contract is for the supply of standardized uniforms for male personnel at the Bureau of Standards Jamaica and the National Council on Bahamian Justice, encompassing shirts, trousers, and associated accessories, all manufactured to precise technical specifications. The work is classified as a subcontract under NAICS code 315210, indicating it falls within the apparel manufacturing sector, and is issued by the Government of Jamaica through the Bureau of Standards Jamaica. Bidders must submit responses by August 10, 2026, and the opportunity was posted on July 20, 2026, with no specific set-aside designation or agency office address provided. The place of performance and point of contact details are not specified, but the contract is accessible via the Jamaican e-procurement portal for further submission requirements.
Bureau of Standards Jamaica

POSTED

2 days ago

DEADLINE

in 19 days
View Details
NAICS: 315210
New
DIBBS
Knit Trunk Manufacturing (APFU Uniforms)The contract involves the full-scale manufacturing of Army Physical Training Uniform trunks, encompassing all stages of production from fabric cutting and sewing to stringent quality control measures, ensuring strict adherence to U.S. military specifications. This subcontract is part of the Defense Logistics Agency’s effort to supply standardized uniforms to the Department of Defense, with production activities required to meet exacting standards for durability, fit, and performance under military conditions. The North American Industry Classification System code 315210 confirms the work falls under Apparel Knitting Mills, indicating specialized textile manufacturing expertise is necessary. All components and processes must comply with Army regulatory requirements, and the finished products are destined for service members across the military branches. While the solicitation number, place of performance, and point of contact are not specified, the contract is linked to a DLA award record under contract SPE1C126F5273, signifying its placement within the broader federal procurement system. The posting date of July 20, 2026, suggests this is a future-oriented procurement initiative aimed at securing consistent and reliable production capacity ahead of anticipated demand.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 315210
New
DIBBS
Special Measurement Tailoring and Direct Customer DeliveryThe contract involves the custom tailoring of trousers based on individual customer measurements, with all finished garments shipped directly to end users within 30 days of order placement. This effort is categorized under NAICS code 315210, which pertains to apparel knitting and apparel manufacturing, and is structured as a subcontract under the Department of Defense’s Defense Logistics Agency. The work is performed without a specified physical location, indicating flexibility in where production and fulfillment activities may occur, as long as delivery timelines are met. The contract emphasizes precision in fit and timely delivery, aligning with the needs of individual recipients, likely for specialized or military personnel requiring form-fitting uniforms or apparel. The solicitation and award details are accessible through a DIBBS portal link, though no point of contact or set-aside provisions are identified, suggesting it operates under general contracting terms without specific small business or demographic preferences.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 315210
New
DIBBS
Manufacturing of Men's Navy White Trousers (NSN 8410-00-0TRS304)The contract entails the full-cycle manufacturing of military-specification men's navy white trousers identified by NSN 8410-00-0TRS304, covering all stages from fabric cutting and precision sewing through rigorous quality control and final packaging, all in strict accordance with Defense Logistics Agency standards. The work must meet exacting defense requirements to ensure durability, fit, and compliance with naval uniform regulations, with no room for deviation in materials or workmanship. This is a subcontract under the Department of Defense, classified under NAICS code 315210 for apparel manufacturing, and was posted on July 20, 2026, with performance obligations tied to DLA’s supply chain protocols. While specific geographic performance details are not provided, the contract is managed through the Defense Supply Center Philadelphia network, and fulfillment must align with DLA’s broader logistics and inventory control frameworks to support global naval operations.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 315210
New
Federal
Galley Uniforms for USS THEODORE ROOSEVELT (CVN 71)The U.S. Navy, through NAVSUP Fleet Logistics Center San Diego, is conducting market research to identify qualified suppliers capable of providing custom galley uniforms for food service personnel aboard the USS Theodore Roosevelt (CVN 71). The requirement includes chef coats in various colors and sleeve lengths, black cook pants with elastic waists and drawstrings, custom T-shirts featuring specific logos, and smocks, all of which must meet strict material, color, and customization standards outlined in the Statement of Work and Material Breakdown List. These uniforms must comply with NAVSUP 486 and be durable, comfortable, and suitable for the demanding shipboard food service environment, including galleys, mess decks, wardrooms, and the CPO mess. All uniforms must be delivered by September 8, 2026, to the designated location at DLA Distribution in San Diego, California. Interested vendors are invited to submit a Statement of Capability, not exceeding five pages, detailing their business size classification, Unique Entity ID and CAGE code, relevant federal contract vehicles, past performance on similar projects, and suggestions for alternative NAICS codes if applicable. Responses must be emailed to Raul Alcantara by July 23, 2026, with the specified subject line, and proprietary information must be clearly marked. This notice is purely for market research purposes and does not constitute a solicitation or guarantee of future contract award; no reimbursement will be provided for response preparation, and no bids or proposals will be accepted.
Navsup Flt Logistics Ctr San Diego

POSTED

3 days ago

DEADLINE

in about 20 hours
View Details
NAICS: 315210
New
Federal
The US Army Band Hot Weather Distinctive UniformThe U.S. Government, through the Department of Defense and the U.S. Army Band “Pershing’s Own,” is conducting market research to identify qualified manufacturers capable of producing Hot Weather Services Uniforms for ceremonial use. This sources sought notice is not a solicitation and does not obligate the government to award a contract, nor will it accept proposals or quotes. The goal is to expand the pool of potential vendors beyond the currently known source to ensure robust competition, particularly encouraging participation from small businesses across all socioeconomic categories, including 8(a), SDVOSB, WOSB, and HUBZone firms. The anticipated NAICS code is 315210, with a size standard of 750 employees, and the requirement is potentially set-aside entirely for small businesses. Respondents must provide detailed information on their capabilities, prior experience with similar uniform manufacturing, pricing structures, commercial availability, and recommendations to facilitate small business competition, along with firm identification, UEI, CAGE code, and structural preference for prime or subcontractor roles. Responses must be submitted via email to the designated contract specialists by 9:00 a.m. EDT on Tuesday, 21 July 2026, with no cost or obligation to the government, and no submissions will be returned or reimbursed. All proprietary or corporate data submitted will be protected from unauthorized disclosure. The government is also seeking input on any conditions or specifications that may unduly restrict competition and welcomes recommendations to improve the acquisition approach. The uniforms are intended for use by the Army Band in ceremonial functions, including presidential and congressional escorts and military funerals at Arlington National Cemetery, with performance expected at Fort Myer, Virginia. Potential offerors are responsible for monitoring the Government-wide Point of Entry for any future solicitation, as no further notice will be provided unless a formal procurement is initiated. Phone inquiries are not permitted.
W6QM Micc-Ft Belvoir

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 315210
New
DIBBS
Moisture-Wicking T-Shirt Manufacturing (Athlete's Tan, 7PK)The contract involves the full manufacturing of moisture-wicking T-shirts in Athlete's Tan color, designed to meet stringent military specifications A-A-59791 and DLA quality standards. The product is to be packaged in 7-packs and offered across five sizes—XS through XXXL—to ensure broad usability across military personnel. Production must adhere to all technical and quality requirements established by the Defense Logistics Agency, with compliance verified through rigorous inspection and testing protocols. This subcontract is part of a larger procurement effort by the Department of Defense to equip service members with high-performance, durable apparel under standardized military guidelines. The solicitation, posted on July 17, 2026, falls under NAICS code 315210, which classifies it within the apparel manufacturing sector. Although the office address and place of performance details are not specified, the contract is managed under the auspices of the Defense Logistics Agency, indicating that fulfillment must align with federal defense supply chain requirements. The award link directs to the official DIBBS platform where contract execution details, delivery schedules, and performance metrics are tracked, ensuring full accountability throughout the manufacturing and distribution lifecycle.
Defense Logistics Agency

POSTED

5 days ago

DEADLINE

N/A
View Details
NAICS: 315210
New
SLED
Custom Sports Uniforms and Apparel SupplyClackamas County is seeking a contractor to supply custom-designed sports uniforms and athletic apparel for its teams, encompassing game uniforms, practice gear, warm-up suits, and associated accessories. The work requires full-service support including design consultation to ensure alignment with the county’s branding and functional needs, sourcing of high-quality performance fabrics, end-to-end manufacturing, and precise embroidery or printing of team logos and identifiers. Delivery of all items must meet specified timelines and quality standards to support athletic programs across the county. The contract is classified as a subcontract under NAICS code 315210, which pertains to apparel knitting mills, indicating the focus on production of knitted sportswear. The solicitation was posted on July 16, 2026, with responses due by July 30, 2026. All work must be performed to meet the requirements outlined in the solicitation, and performance is expected to serve Clackamas County’s local athletic initiatives. Interested parties can access the full solicitation details via the provided online link.
Clackamas County

POSTED

6 days ago

DEADLINE

in 8 days
View Details
NAICS: 315210
New
SLED
Custom Logo & Tournament Merchandise ServicesThe contract seeks a subcontractor to design, source, and fulfill custom-logo apparel and promotional merchandise for tournaments, events, and branded initiatives, with all work governed under NAICS code 315210 for apparel manufacturing. The opportunity is posted by MPTAP under the Mississippi agency, with responses due by July 30, 2026, and the solicitation opened on July 16, 2026. The award will support the creation of branded items that reflect institutional identity across various public-facing activities, requiring precision in logo replication, material quality, and timely delivery. While specific performance locations and point of contact details are not provided, the subcontractor must be prepared to manage end-to-end production, including sourcing materials, ensuring design accuracy, and coordinating logistics to meet event timelines. Eligibility and compliance requirements are implied through the subcontract classification and state agency sponsorship, though no set-aside provisions are specified.
MPTAP

POSTED

6 days ago

DEADLINE

in 8 days
View Details
NAICS: 315210
New
DIBBS
Women’s Safety Boot Supply (Various Sizes)The contract entails the manufacture and delivery of unisex safety boots specifically sized for women, adhering to federal safety standards and requiring full domestic sourcing of materials and components. The work involves producing boots that meet stringent regulatory requirements for protection and durability, with attention to proper sizing and fit for female wearers, despite the unisex designation. All units must be properly packaged and prepared for shipment in accordance with federal logistics protocols. The subcontract is issued under the North American Industry Classification System code 315210, which classifies it within the footwear manufacturing sector, and is managed by the Defense Logistics Agency under the Department of Defense. Timing and delivery schedules are tied to the contract’s issuance date of July 16, 2026, though specific deadlines for fulfillment are not detailed in the available data. Performance is expected to comply with all applicable government procurement rules and quality control measures, with shipment destined for military or defense-related operations.
Defense Logistics Agency

POSTED

6 days ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → C AND T SUPPLY CHAIN

Same awarding agency

NAICS: 339993
New
DIBBS
LAPEL BUTTON, AWARDThe contract specifies the procurement of 1,000 civilian retired U.S. Army lapel buttons with NSN 8455-00-198-3753 under solicitation SPE1C1-26-Q-0373, issued by the Department of Defense through C and T Supply Chain. The item must be manufactured and packaged in strict compliance with MIL-L-11484, with each button mounted on a white Bristol board or equivalent card measuring approximately 1 3/4 inches square and sealed in chemically inert clear plastic to prevent damage to the metal finish. Air Force civilian lapel buttons are exempt and require individual packaging in a rigid hinged plastic box with a transparent lid and opaque bottom, secured on a polyethylene pad to restrict movement. One hundred individually packaged buttons are packed in an ASTM-grade cardboard intermediate box, and contractors may optionally group these into commercial shipping containers that provide adequate protection against corrosion, deterioration, or damage during transit. Marking must adhere to MIL-STD-129 and MIL-HDBK-129, including NSN, contractor CAGE code, nomenclature, packing date, contract number, and, for intermediate and shipping containers, contractor address, lot and shipment numbers, and delivery address, with bar-coding required for specified entries. Palletization is mandatory when economically feasible, using four-way winged pallets in accordance with MIL-HDBK-774. First article testing requires submission of five samples, with written notification of acceptance or rejection within thirty calendar days of receipt. Inspection and acceptance occur at the destination under FAR 52.246-2, and all packaging and handling must meet DLA packaging requirements. The contract is firm fixed price with zero variance allowed, delivery is due in 192 days after contract award, and the destination is Arizona Industries for the Blind in Phoenix, Arizona. The use of MIL-STD-105E is canceled; future applications should reference MIL-STD-1916 or ANSI/ASQ Z1.4, subject to evaluation for applicability.
Fastener, Button, Needle, and Pin Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332312
New
DIBBS
POLE, BEACH, PANEL MAThe contract specifies the procurement of 130 units of a telescopic steel beach panel marker upright, 12 feet long with a 1-inch diameter, tapered stake end, manufactured in strict compliance with Drawing 71C5045A0000 and 71C5045A0001 and conforming to Military Specification MIL-P-28983. All items must meet technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, and are subject to inspection and acceptance at the destination. The product must be free of mercury or mercury compounds in preservation, packaging, and marking, and supply chain traceability documentation must be retained by the contractor per DLA Directive Procurement Note C03. First Article Testing requires submission of two complete samples for visual, dimensional, and shade evaluation, with results and directions provided within 30 calendar days of receipt. Packaging must adhere to MIL-STD-2073-1E and MIL-P-28983, utilizing specified methods, materials, and labeling, with marking conforming to MIL-STD-129 and no special marking codes. The contract is firm fixed price with zero variance tolerance on quantity and requires delivery to Arizona Industries for the Blind in Phoenix, AZ within 291 days of the award date. Transportation and shipping instructions follow DLA Procurement Notes C19 and C20. This solicitation is a total small business set-aside under FAR 19.5, and the item is identified by NSN 8345-00-274-3936 with a purchase request number of 7017430271 and a required ship date of July 8, 2027.
Fabricated Structural Metal Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 6 days
View Details
NAICS: 315990
New
DIBBS
INSIGNIA, SHOULDER SThe contract specifies the procurement of 10,000 embroidered shoulder sleeve insignias for the United States Army Western Command, in OCP Bagby Green 67204 and Black Han 67138, featuring hook fastener tape backing and overedge stitching with a minimum of 3,700 stitches. All items must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, and the most recent version of ANSI/ASQC Z1.4 must be applied without exception. Five first article samples are required, and the contractor will receive formal written notification within 30 calendar days of the Contracting Officer’s receipt. The pricing is firm fixed price with zero variance allowed in quantity, and inspection and acceptance occur at destination. Delivery is required within 142 days after date of award, with freight shipped to Arizona Industries for the Blind in Phoenix, AZ. Packaging must conform to MIL-STD-2073-1E, MIL-DTL-14652B, ASTM-D-3591, and ASTM D 3951, with insignias bundled in groups of twenty, enclosed in sealed plastic bags, and grouped into containers of no more than 5,600 units. Each bundle and container must be labeled with a barcode including NSN, CAGE, item name, quantity, and contract number, and marking must follow MIL-STD-129. Palletization must adhere to MIL-HNBK-774 and DLA packaging requirements. All supplies are subject to provisions for the protection of covered defense information.
Apparel Accessories and Other Apparel Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details
NAICS: 315990
New
DIBBS
POCKET, AMMUNITION MThe contract pertains to the procurement of pocket ammunition for rifle magazines, identified by NSN 8465-01-689-4570 and part number 51000160 from Heckler & Koch Defense Inc., with a quantity of six units required at a unit price of six dollars, for a total price of thirty-six dollars. Delivery is mandated within twenty days FOB destination, with no tolerance for quantity variance, and inspection and acceptance both occur at the delivery point. Packaging must strictly comply with MIL-STD-2073-1E, ASTM D 3951, MIL-STD-147, and MIL-STD-129, with marking following MIL-STD-129 standards and no special markings required. The packaging code is designated as U, and palletization must adhere to DLA packaging requirements. The item includes traceability obligations under DLA Directive Procurement Note C03, mandating contractor retention of supply chain documentation, and is subject to Covered Defense Information protocols. The shipment must be sent via traceable freight methods, excluding parcel post, to the designated delivery point at Fort Stewart, Georgia. The required delivery date is July 23, 2026, and the solicitation number is SPE1C1-26-T-1546, with technical and quality requirements incorporated by reference from the DLA Master List. The contract is under the Department of Defense, managed by C and T Supply Chain, with Jennifer Scarpello as the primary point of contact.
Apparel Accessories and Other Apparel Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
BRASSARDThe contract specifies the procurement of 500 Brassard units, identified by NSN 8455-00-153-9846, under solicitation SPE1C1-26-Q-0369, with a firm fixed price and no variance allowed in quantity. Delivery is required within 100 days after award to the destination address of Arizona Industries for the Blind in Phoenix, Arizona, with inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-B-3476, and marking must adhere to MIL-STD-129 with no special markings required. The supply is classified under PGC 33040 and is governed by DLA packaging and quality standards, incorporating technical and quality requirements from the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size. The use of mercury or mercury-containing compounds is prohibited except for specified functional applications in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents authorized by NAVSEA, with strict containment requirements for exempted items. First article testing is mandatory, requiring five samples to be submitted, with written notification from the contracting officer due within 30 calendar days of receipt. Acceptance standards follow FAR 52.246-2, and MIL-STD-105E has been canceled, with future procurements expected to reference MIL-STD-1916 or ANSI/ASQ Z1.4, both of which must be evaluated for applicability. The contract references the DLA Unit of Issue conversion tool for standardization and mandates compliance with DLA transportation protocols C19 and C20. The item is intended for government use with a material need date of February 26, 2027, and the point of contact is Quanda Singleton, with the solicitation issued on July 21, 2026, and responses due by July 27, 2026. All provisions are subject to DLA’s authorized procurement frameworks and compliance with defense information security requirements.
Hardware Manufacturing

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 313210
New
DIBBS
CLOTH, DUCKThe contract specifies the manufacture of 500 square yards of nylon duck cloth meeting PIA-C-7219, the most current revision, with a maximum weight of 9.5 ounces per square yard before treatment, a nominal width of 45 inches, and a mandatory color of Orange 70072 on both sides, sourced from the Color Association of the United States. The material must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, and any changes to component materials require prior written approval from the DLA Troop Support Contracting Officer. The contractor is fully responsible for all inspection, examination, and testing to ensure conformance, though the government retains the right to conduct its own verification. All packaging, preservation, and labeling must adhere to ASTM D-3951, PIA-C-7219, MIL-STD-2073-1E, and MIL-STD-129, including the use of pressure-sensitive or paper tags with 13-digit NSN and 12-digit UPC barcodes that are scannable, legible, and visible even when folded and packaged. Barcodes must not damage the product, and labels must be applied per MIL-DTL-32075 depending on packaging method. Each unit, intermediate, and exterior container must display the NSN, manufacture date, and lot number. Palletization must use four-way entry pallets under MIL-STD-147E, with identical quantities per carton and single NSN per carton; mixed NSN pallets must be clearly labeled. Cartons may deviate from quantity by no more than one at the end of a run and must be marked “SHORT” or “OVER.” All shipments must meet Department of Defense preservation and packaging standards, and the product is subject to inspection and acceptance at destination under FAR 52.246-2. The contract carries a firm fixed price with a 2% quantity variance, a 120-day delivery window from award, and includes provisions for government-assigned UPC codes and DOD-compliant marking systems.
Broadwoven Fabric Mills

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 339999
New
DIBBS
CLIP, HEADBAND HELMEThe contract is for the procurement of 17 units of the CLIP, HEADBAND HELME with NSN 8470-01-729-3458, issued under solicitation SPE1C1-26-T-1547 by the Department of Defense through C and T Supply Chain. The delivery must be completed within 20 days of contract award, with FOB destination terms, and inspection and acceptance occur at the delivery point. No quantity variance is permitted, and all items must comply with MIL-STD-2073-1E packaging standards, including specific packaging methods, materials, and unit container requirements. Packaging and marking must adhere to MIL-STD-129 and MIL-STD-147 with no special marking codes. The shipment must be sent via traceable means, not parcel post, to the specified military address at MCAS New River, Jacksonville, NC. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. The contract enforces strict compliance with DLA packaging and transportation directives including RP001 and DLAD PROC NOTES C19 and C20. The originator is TEAM WENDY LLC with P/N 80-CAK-BP, and delivery is required no later than July 23, 2026. All items must be shipped using the provided transport control number and are subject to DLA’s covered defense information protocols.
All Other Miscellaneous Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 339999
New
DIBBS
SNAP LINK, RAPPELLERThe contract specifies the procurement of 7,500 SNAP LINK, RAPPELLER units under solicitation SPE1C1-26-T-1545, with delivery split across four CLINs totaling 2,000, 2,000, 2,000, and 1,500 units respectively. All items are identified by NSN 8465-01-561-6950 and must be delivered FOB destination within 96 days of award, with no variance allowed in quantity. Packaging and marking must strictly comply with MIL-STD-2073-1E, MIL-STD-129, and DLA Packaging Requirements RP001, prohibiting bulk packaging and requiring individual barcoding on paper tags made of 100-pound bleached sulfate stock with a smooth finish, each tagged with a 13-digit NSN and a government-assigned 12-digit UPC, both readable by scanner and clearly visible even when the item is folded. Labels must not damage the item and must be attached via fastener with a perforation for hanging. For items in plastic bags, Type VII pressure-sensitive labels per MIL-DTL-32075 are required; for bundled or individual items, Type VIII paper tags are mandatory. Inspection and acceptance occur at the destination per FAR 52.246-2, and sampling standards have been updated to replace MIL-STD-105E with MIL-STD-1916 or ANSI/ASQ Z1.4. Palletization and shipping addresses are designated for multiple locations including Lansing, MI; Pendergrass, GA; Austin, TX; and other logistics centers. The contract is a total small business set-aside under NAICS code 339999, with performance tied to Department of Defense logistics and procurement protocols.
All Other Miscellaneous Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 315990
New
DIBBS
GOGGLES, SUN, WIND ANThe contract specifies the procurement of one pair of sun, wind, and dust protective goggles with part number EE7001-01 and NSN 8465-01-729-3691 under solicitation SPE1C1-26-T-1544. The item must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with packaging governed by MIL-STD-2073-1E and marking conforming to MIL-STD-129 and MIL-STD-147. Palletization must follow DLA packaging standards and bulk packaging is strictly prohibited. The delivery is FOB destination within 20 days of contract award, with no variance allowed in quantity. Inspection and acceptance occur at the delivery point, and shipment must be sent via traceable methods; parcel post is forbidden. The designated recipient is the Marine Aviation Logistics Squadron 26 at MCAS New River, North Carolina, with detailed shipping and return addresses provided. The item carries a UPC of 718020957937 and must be marked with no special codes. The contract includes controlled information provisions under RD003 and requires compliance with DLA packaging and transportation procedures. The original required delivery date is July 23, 2026.
Apparel Accessories and Other Apparel Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 339999
New
DIBBS
REPAIR KIT, HELMETThe contract is for one repair kit for a helmet, identified by NSN 8470-01-729-3493 and part number 70-ESS-PRM, issued under solicitation SPE1C1-26-T-1543 by the Department of Defense through C and T Supply Chain. The item must be delivered in full quantity of one unit within twenty days of contract award, with delivery point designated as FOB destination at Marine Aviation Logistics Squadron 26, MCAS New River, Jacksonville, NC. Exact compliance with packaging standards is mandated, requiring adherence to ASTM D3951 unless superseded by DLA Master List requirements, and all packaging must be labeled in accordance with MIL-STD-129 using the specified Unit of Issue and Quantity per Unit Pack. Palletization must follow DLA’s RP001 packaging guidelines. Shipping must use traceable transport methods and explicitly prohibit parcel post services. The required delivery date is July 23, 2026, and the contract includes detailed government-specific identifiers for tracking, distribution, and acceptance procedures, with inspection and acceptance occurring at the destination. The point of contact for inquiries is Jennifer Scarpello at safetyprotection@dla.mil.
All Other Miscellaneous Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 484220
New
DIBBS
Freight and Traceable Delivery LogisticsThe contract requires the execution of fast and traceable delivery of military hardware to Fort Bragg, North Carolina, with all shipments strictly adhering to Defense Logistics Agency shipping protocols and excluding parcel post methods. The work involves specialized freight logistics to ensure timely, secure, and fully traceable transport of critical equipment, with operations focused on meeting the operational demands of the military installation at ZIP code 28310. All service providers must demonstrate compliance with DLA standards for handling, tracking, and documentation throughout the delivery process. This is a subcontract solicitation under NAICS code 484220, issued by the C and T Supply Chain organization under the Department of Defense, with responses due by July 31, 2026. The solicitation is open for bidding through the DIBBS platform and places emphasis on reliability, security, and adherence to federal military logistics frameworks without specifying set-aside status or small business preferences. Performance is contractually bound to the designated location at Fort Bragg, and successful bidders must be prepared to meet rigorous delivery timelines and traceability requirements tailored to defense operational needs.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 541380
New
DIBBS
Packaging, Labeling, and Hazard Communication Compliance ServicesThe contract requires technical services to ensure packaging, labeling, and hazard communication systems comply with Department of Defense standards, specifically MIL-STD-129, ASTM D3951, and applicable federal packaging directives. All work must align with DLA requirements to support military logistics operations, focusing on the accurate design and implementation of packaging solutions that meet durability, identification, and safety specifications for hazardous and non-hazardous materials. Services will include the development of compliant labels, proper declaration of hazardous materials, and adherence to standardized marking and coding protocols across all shipment containers. The contract is structured as a subcontract under NAICS code 541380 and is managed by C AND T SUPPLY CHAIN under the Department of Defense. Performance is designated to take place at Fort Bragg, North Carolina, with a response deadline of July 31, 2026, and the solicitation posted on July 20, 2026. Proposers must demonstrate expertise in military packaging compliance and the ability to deliver services that maintain full alignment with federal and DoD regulatory frameworks. No set-aside classification is specified, and all submissions must be submitted through the DIBBS platform using the provided UI link.
Testing Laboratories and Services

POSTED

2 days ago

DEADLINE

in 9 days
View Details