Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

This Government Contract opportunity from Government of Canada was posted on June 19, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Masonry Repointing

Closed
International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238140
New
2026-Nalo-Concrete Patching and CMU Wall Repair
Solicitation # 2026-Nalo-Concrete Patching and CMU Wall Repair
This is a subcontracting opportunity under Management and Training Corporation (MTC) for masonry services related to concrete patching and CMU wall repair at the Hawaii Job Corps Center in Waimanalo. The solicitation, identified as 2026-Nalo-Concrete Patching and CMU Wall Repair, is a fixed-price lump sum contract requiring bidders to propose a total project cost with a detailed breakdown encompassing materials, labor, equipment, permits, disposal, bonds, subcontractor costs, overhead, and profit. The scope of work includes demolishing and removing approximately 230 linear feet of failed CMU wall with offsite debris disposal, installing 230 linear feet of new 8-foot-high galvanized chain link fence with steel posts set in concrete footings, removing and replacing 168 square feet of concrete walkway with reinforced #3 rebar slabs and broom finishes, repairing a 4 linear foot damaged stairwell corner, and removing and regrading 150 square feet of uplifted concrete slab to correct drainage issues. All work must comply with federal, state, and local codes enforced by HUD, EPA, OSHA, DOT, and HIOSH, and includes a one-year workmanship warranty. A mandatory site visit with signed attendance is required prior to bid submission, and bidders must provide three references for comparable projects. The contract mandates compliance with a series of federal acquisition regulations including FAR 52.204-10 for executive compensation reporting, FAR 52.222-11 requiring submission of SF-1413 form for labor compliance, FAR 52.219-8 for small business categorization, and FAR 52.209-6 for debarment disclosure for first-tier subcontractors exceeding $30,000. Performance and payment bonds are required if the bid is $25,000 or more, issued in the name of MTC/DOL/Hawaii Job Corps Center, with a surety rated A or better, submitted within five business days of an intent to award letter, and must be in the full amount of the contract. All contractors must adhere to the Davis Bacon Act, including displaying wage determinations and submitting weekly certified payroll reports. Payment terms involve a 10% retainage until substantial completion and acceptance, with invoicing requiring AIA G702/G703 forms, and final payment contingent upon submission of multiple documents including final
Management & Training Corporation

POSTED

about 6 hours ago

DEADLINE

in 25 days
NAICS: 238140
New
SLED
2027-05 Repoint Brick Facades - 4 Locations - Town of Fairfield
Solicitation # 38285
The Town of Fairfield, acting through its Department of Public Works, is seeking qualified contractors to perform repointing work on brick facades at four locations, involving the removal of 15 to 20 millimeters of deteriorated mortar and its replacement with a fresh, lime-based mix to achieve an oatmeal consistency and proper structural restoration. The work must be completed with precision to ensure durability and historical integrity, using materials and techniques appropriate for masonry preservation. Bids must be submitted by the deadline of August 14, 2026, at 3:00 PM, with the solicitation number 38285, and all related information is accessible via the official bid portal. This is a competitive solicitation posted exclusively for notification purposes, and no questions submitted through public channels will be answered; interested parties must review the full documentation on the designated website to understand requirements, specifications, and submission protocols. The project falls under the jurisdiction of the Connecticut state procurement system, with Pru O’Brien serving as the primary point of contact for administrative inquiries. All work must be performed at the designated locations within Connecticut, and contractors are expected to comply with all applicable standards for historic masonry restoration without reliance on external guidance from the posting platform.
DAS Procurement

POSTED

4 days ago

DEADLINE

in 10 days

AI Contract Overview

Show more

The contract involves the repointing of masonry around window openings, requiring the careful removal of deteriorated mortar, thorough cleaning of joints, and application of new mortar that precisely matches the existing material in both color and composition to maintain aesthetic and structural integrity. This work is critical for preserving the building’s exterior and ensuring long-term weather resistance and durability of masonry elements. The contract is classified as a subcontract under NAICS code 238140 and was posted by the National Research Council of Canada, an agency of the Government of Canada. The place of performance is in Ottawa, Canada, with a response deadline of July 30, 2026, at 7:00 PM Eastern Time. The solicitation does not specify a set-aside classification, and no point of contact or additional geographic details are provided beyond the location. Interested parties must submit their proposals through the designated Canadian government procurement portal by the stated deadline.

General Info

Repoint masonry around windows in Ottawa by July 30, 2026, matching existing mortar for structural and aesthetic integrity.

Agency

Government of Canada → National Research Council of CanadaView Agency

NAICS

238140 - Masonry ContractorsView NAICS

Place of Performance

Canada, Ottawa, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGovernment of Canada → National Research Council of Canada
ContactsNo contacts available
OfficeN/A
Organization / Agency
Government of Canada → National Research Council of Canada
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Repointing of masonry around window openings, including removal of old mortar, joint cleaning, and application of new mortar matching existing in color and composition.

More opportunities from Government of Canada → National Research Council of Canada

Same awarding agency

NAICS: 811211
New
International
Emergency Calibration and On-Demand Response ServicesThe contract demands the provision of 24/7 emergency calibration services to respond rapidly to unplanned equipment failures within a GMP-compliant environment, ensuring uninterrupted operations and regulatory adherence. Contractors must be prepared to deploy qualified personnel at any time to recalibrate critical measurement instruments, minimizing downtime and maintaining product quality and process integrity. Service levels require immediate response capabilities, with strict protocols for documentation, traceability, and compliance with GMP standards throughout all calibration activities. The opportunity is structured as a subcontract under the National Research Council of Canada, part of the Government of Canada, with performance obligations located across Canada. The solicitation was posted on August 1, 2026, and responses are due by August 25, 2026, under NAICS code 811211 for industrial and commercial equipment repair and maintenance. Bidders must demonstrate proven experience in regulated environments, capable of meeting stringent response time expectations and maintaining rigorous calibration records acceptable to health and safety authorities. Successful vendors will be expected to integrate seamlessly with existing facility operations and uphold the high standards required for pharmaceutical, biotech, or similar GMP-regulated manufacturing settings.
Consumer Electronics Repair and Maintenance

POSTED

3 days ago

DEADLINE

in 21 days
View Details
NAICS: 561422
New
International
B.10 Help Desk Specialist, Level 3, Voluntary Indigenous Set-Aside
Solicitation # 26-58066
The National Research Council of Canada is seeking qualified Indigenous service providers to deliver Level 3 Help Desk Specialist services on an as-needed basis to support IT system migrations under the Mercury Program. This solicitation is a Voluntary Indigenous Set-Aside open exclusively to suppliers who have pre-qualified under the TBIPS Supply Arrangement EN578-170432 for B.10 Help Desk Specialist, Level 3. The requirement is designed to respond flexibly to fluctuating demand, ensuring timely and expert technical support during critical system transitions. Proposals must be submitted by the deadline of August 19, 2026, and all responders must be Indigenous Supply Arrangement holders meeting the specified pre-qualification criteria. The contract will be performed across Canada with no specific city or state limitations, and all work is to be carried out in support of federal IT infrastructure. Shufang Weng, the Contracting Authority, is the primary point of contact for inquiries and can be reached via email or phone. The solicitation was posted on August 1, 2026, under the tender number CB-94-51127631, and is accessible via the Canada Buys portal. Participation is restricted to Indigenous businesses that have successfully completed the prior qualification process, reinforcing commitments to Indigenous economic inclusion and equitable access to federal contracting opportunities.
Telemarketing Bureaus and Other Contact Centers

POSTED

3 days ago

DEADLINE

in 15 days
View Details
NAICS: 333248
New
International
Large Slurry Mixer
Solicitation # 26-58093
The National Research Council of Canada is soliciting a large slurry mixer for use in its Clean Energy Innovation Research Center to support the development of viscous battery slurries for a prototyping line, with the goal of enhancing efficiency and operational versatility. This procurement, under solicitation number 26-58093, is governed by the Policy on Reciprocal Procurement, which restricts eligibility exclusively to Canadian suppliers and suppliers from applicable trading partners; offers from non-trading partner entities will be rejected. The contract requires the delivery of a single large slurry mixer meeting strict technical specifications, including a maximum footprint of 2000 kg, dimensions no greater than 3000 mm in depth and height and 2000 mm in width, and a stand-alone, floor-mounted design operable by a single person. The system must include a cooling/heating capacity of at least 5000 kCal/h (6 kW) at 10°C with automatic temperature control and real-time temperature display on a control panel. The full scope includes final design and drawings for NRC approval, successful Factory Acceptance Test (FAT), delivery of the complete mixer with all accessories and documentation, on-site installation, Site Acceptance Test (SAT) approval, and comprehensive operator training. All deliverables must be completed within 11 months of contract award, with key milestones set at two months for design approval, five months for FAT completion, and eight months for delivery. Payment is on a firm unit price, fixed-price basis, with no advance payments and invoices submitted only after each deliverable is completed. The contract includes a mandatory 12-month warranty or the contractor’s standard warranty, whichever is longer, and requires compliance with environmentally preferable packaging standards and the NRC’s Security Requirements Checklist. The contractor must comply with Canadian federal ethics standards, including the Conflict of Interest Act and the Values and Ethics Code for the Public Service, and is subject to audit and oversight under the Accounts and Audit provisions. Payment terms specify 30 days for undisputed invoices, with 15 percent withholding for non-resident contractors unless a valid waiver is provided by the Canada Revenue Agency. The mixer will be delivered under Incoterms® 2020 DAP to 75, de Mortgage Boulevard, Boucherville, QC, J4B 6Y4, with shipping accessible only via de Lauzon Street. Proposals must be submitted electronically in three distinct sections—Technical Offer, Financial Offer,
All Other Industrial Machinery Manufacturing

POSTED

4 days ago

DEADLINE

in 3 days
View Details
NAICS: 334513
New
International
Bio-capacitance probe system
Solicitation # 26-58103
The National Research Council of Canada is soliciting a bio-capacitance probe system designed for real-time, in situ measurement of viable cell concentration and dielectric properties in up to four bioreactors operating in parallel. The system must enable multi-frequency scanning to capture the capacitance distribution spectrum of cells, allowing for the calculation of critical parameters such as cell size, internal conductivity, and critical frequency through analysis of the β-dispersion using the Cole–Cole α model. Each probe must be compatible with the variety of bioreactor types used by the NRC, feature leak-tight installation capabilities, withstand sterilization and clean-in-place procedures, and deliver highly accurate bio-capacitance and conductivity measurements. Data from the probes must be accessible in real time via both OPC-UA communication for integration into control systems and 4–20 mA analog signals for direct control loop utilization. The hardware must be new, unused, off-the-shelf, and guaranteed to be free from counterfeit components, delivered DAP to the NRC Montreal facility with all necessary packaging, installation support, and documentation. The contract is awarded on a Lowest Evaluated Price with Mandatory Technical Criteria basis, meaning only offers that fully satisfy all six mandatory technical requirements—probe length, diameter, leak-tight capability, durability under CIP/sterilization, and measurement accuracy for both bio-capacitance and conductivity—are eligible for consideration; failure in any one results in non-responsiveness. The winning bidder will be selected solely on the lowest price among compliant offers, with no trade-offs permitted between technical merit and cost. The system must include software licensed to the Government of Canada under a perpetual, royalty-free, non-exclusive license, and all equipment must be accompanied by compliant documentation and packaging that adheres to Canadian environmental standards, being reusable, recyclable, or returnable. Invoices must be submitted electronically to a designated NRC email address, with payment made via direct deposit, wire transfer, EDI, or MasterCard, subject to a 15% withholding for non-resident contractors. The contractor is required to retain all contract records for seven years after final payment and must certify compliance with Canadian laws, the procurement code of conduct, and the prohibition of contingency fees. No security clearance is required, no key personnel are designated, and there are no contract options for future quantities or extensions. Proposals must be submitted electronically as two separate files—technical and financial—by August 24, 2026, at 14:00 Eastern
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

4 days ago

DEADLINE

in 20 days
View Details
NAICS: 333515
New
International
Fiber Laser Cutter for Aluminum and Copper
Solicitation # 26-58021
The National Research Council Canada is seeking a high-precision, enclosed fiber-laser cutting system capable of reliably cutting aluminum and copper for battery prototype components through solicitation 26-58021, with a submission deadline of July 27, 2026 at 14:00 EDT. The system must feature a fiber-type laser with a minimum power output of 3000W and a 10:1 operational turn-down ratio, a work area between 400x300mm and 635x635mm, a Z-axis of at least 50mm, and positioning precision of 0.1mm or better. It must cut 4.064mm aluminum and 3.175mm copper at speeds of at least 1m/min, include an auto-tracking laser head, a fully enclosed work area, integrated gas assist support for oxygen, nitrogen, and air, and an active protection system against back-reflected laser energy. The scope includes delivery, installation, commissioning, and training, with all deliverables required to be received at NRC Building U91, 2320 Lester Road, Ottawa, ON K1V 1S2. The system must be delivered under Incoterms® 2020 Delivery at Place (Vancouver, BC), with the vendor responsible for all shipping, customs, and duty costs. Only Canadian suppliers are eligible under the Policy on Reciprocal Procurement, and offers must be submitted electronically in three distinct sealed attachments labeled Technical Offer, Financial Offer, and Forms, with a total message size not exceeding 10MB; compressed files, links, or physical submissions are prohibited. The contract is awarded on the basis of the lowest evaluated price among compliant offers, with all mandatory technical requirements identified with the word “must” serving as pass/fail gates; failure to meet these disqualifies an offer from financial review. Offerors must submit sample cuts within 15 business days of receiving materials, accompanied by a detailed cutting report. Acceptance of the system by Canada requires a formal written request from the contractor, followed by a 30-day inspection period; rejection allows Canada to require corrections at the contractor’s expense without additional cost. Payment terms specify undisputed invoices will be settled within 30 days of receipt in acceptable form, with 15% withholding for non-resident contractors unless a CRA waiver is provided. Invoices must be emailed
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

5 days ago

DEADLINE

in 6 days
View Details