Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Mechanical Reverse Engineering and CAD Drafting

Active

State & Local

Response Deadline12/08/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Mechanical Reverse Engineering and CAD Drafting supports prime contractors on pumping plant projects for the Santa Clara Valley Water District in California. The selected provider will analyze worn mechanical parts to gather necessary data and create precise technical drawings and documentation for new, replacement, or repair components. All work must be performed using SolidWorks, AutoCAD, or other approved CAD software while adhering to professional engineering and drafting standards. The opportunity was posted on November 2, 2026, with a response deadline of December 8, 2026. Classified under NAICS code 541330, the contract focuses on the delivery of high-quality technical prints and CAD documentation to ensure the successful maintenance and upgrading of Valley Water infrastructure.

General Info

Mechanical reverse engineering and CAD drafting for Santa Clara Valley Water District pumping plants.

Agency

California → Santa Clara Valley Water District (Valley Water)

NAICS

541330 - Engineering Services

Place of Performance

CA, USA

Set-Aside

NONE

Documents

This scope was carved out of VW0725.

The full solicitation package (7 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Pacheco Pumping Plant Pump 12 Rebuild

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 2

subcontract

Response DeadlineDec 8

Submission deadline

Response Deadline

12/08/2026, 10:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyCalifornia → Santa Clara Valley Water District (Valley Water)

ContactsNo contacts available

OfficeN/A

Organization / AgencyCalifornia → Santa Clara Valley Water District (Valley Water)

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Analyzes existing worn parts to create technical drawings for prime contractors on Valley Water pumping plant projects. Attains data from existing components to produce prints and documentation for new, replacement, and repair parts using SolidWorks, AutoCAD, or approved CAD software. Adheres to professional engineering and drafting standards. Delivers technical prints and CAD documentation.

Similar Contracts

Same NAICS industry code

GLCA 318882 - Provide Lake Access to Bullfrog Area

Solicitation # glca-318882-provide-lake-access-bullfrog-area

This solicitation, issued by WW Clyde & Co, seeks design services to provide lake access to the Bullfrog Area in Utah. The scope of work includes the design of a 150-foot-wide concrete launch ramp with a 10.5% grade servicing water surface elevations between 3700 and 3450, a 16-acre asphalt parking area, and a two-lane asphalt access road connecting the parking area to US 276. The project is set aside for small businesses, including SDVOSB, WOSB, HUBZone, and SDB certifications, and includes a specific Indian Small Business Economic Enterprise requirement. Interested parties must submit their responses by November 12, 2026. The primary point of contact for this opportunity is Chanel Hope.

POSTED

about 4 hours ago

DEADLINE

Business Impact Analysis and Update Disaster Recovery Plan Services – Inland Empire Utilities Agency

Solicitation # business-impact-analysis-update-disaster-recovery-plan-services-inland-empire-utilities-agency

Aanko Technologies Inc. is soliciting certified Disadvantaged Business Enterprise and Small Business Enterprise sub-consultants and suppliers to provide specialized professional services for the Inland Empire Utilities Agency in San Bernardino and Riverside Counties, California. The scope of work focuses on emergency management, business continuity planning, technical writing, data collection, and the updating of IT and disaster recovery plans. Eligible firms should operate under NAICS codes related to administrative management, engineering services, computer systems design, or public relations and technical writing. Interested parties must submit their responses by November 17, 2026. Primary inquiries regarding this solicitation should be directed to Liz Jordan-Wettstein.

Aanko Technologies Inc.

POSTED

about 4 hours ago

DEADLINE

TxDOT Aviation Division- Notice to Consultants

Solicitation # RFQ26ALPAMPA00021

The Texas Department of Transportation Aviation Division has issued solicitation RFQ26ALPAMPA00021 for professional services to support Perry Lefors Field in Gray County. The project scope involves updating the Airport Layout Plan (ALP) with a narrative and conducting an 18B Obstruction Survey. The work is structured into four phases: a kick-off phase for goal setting and strategic planning, Phase I for aviation demand forecasts and design standards, Phase II for facility and land use alternatives including RSA evaluations, and Phase III for the development of a Capital Improvement Plan and the final ALP update. All deliverables must comply with the latest Federal Aviation Administration Master Plan Advisory Circular, specifically Standard Operating Procedures 2.0, 3.0, and 8.0. Interested firms must submit a Qualifications Statement of no more than nine pages via the TxDOT Aviation eGrants system by December 2, 2026, at 2:00 PM CST. Selection is based on a scoring system weighted equally across four categories: capability and personnel, recent experience within the last ten years, performance and reliability, and the proposed technical approach and schedule. Respondents must provide a project schedule measured in weeks and include mandatory certifications regarding the 2019 and 2021 National Defense Authorization Acts and the U.S. Department of Commerce's foreign adversaries list. The top-rated firm will be selected by a committee of local government representatives and will subsequently enter fee negotiations to establish a professional services agreement.

Texas Department of Transportation

POSTED

about 6 hours ago

DEADLINE

Testing, Adjusting, and Balancing (TAB)

DAS Procurement

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Parking Systems Analyst/ConsultantThe City of Cranbrook is seeking a Parking Systems Analyst/Consultant for a subcontracting role to determine the ideal balance between mobile and kiosk parking systems. The selected consultant will perform a detailed analysis of population trends, parking statistics, zoning, and development data to conduct comparative adoption studies. The final deliverables for this project include a sustainable solution design and a comprehensive written recommendation report. Qualified candidates must hold credentials as a Professional Planner or in Urban Engineering. Interested parties should note that the solicitation was posted on November 3, 2026, with a response deadline of November 25, 2026. This project falls under NAICS code 541330 and will be performed in Canada.

City of Cranbrook

POSTED

about 6 hours ago

DEADLINE

Construction Management and Inspection ConsultantThe Telfair County Board of Commissioners is seeking a Construction Management and Inspection Consultant to provide oversight and inspection services for building improvements at the Telfair County Senior Center. The selected subcontractor will be responsible for conducting site inspections to ensure design conformity, managing the bid phase, and utilizing project management software to verify milestones for CDBG funding compliance. Key deliverables include the submission of detailed inspection reports, bid tabulations, and final completion certifications. Qualified candidates must hold a Construction Management certification (CCM) and possess documented experience with CDBG reporting. This opportunity is categorized under NAICS code 541330, with a response deadline set for December 7, 2026.

Telfair County Board of Commissioners

POSTED

about 6 hours ago

DEADLINE

in about 1 month

MEP Engineering ConsultantThe Telfair County Board of Commissioners in Georgia is seeking an MEP Engineering Consultant for a subcontract to provide mechanical, electrical, and plumbing system designs for building improvement projects at the Telfair County Senior Center. The selected consultant will evaluate existing systems and utilize MEP modeling software to design upgrades that comply with current building codes and ADA senior accessibility standards. Key deliverables for this project include system specifications, energy reports, and detailed MEP blueprints. To qualify for this engagement, the consultant must hold a Professional Engineer license and maintain Errors and Omissions insurance. Interested parties must submit their responses by the deadline of December 7, 2026. This opportunity falls under NAICS code 541330 and focuses on enhancing the infrastructure of the senior center to ensure modern safety and accessibility.

Telfair County Board of Commissioners

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Civil and Structural Engineering ConsultantThe Civil and Structural Engineering Consultant subcontract involves providing specialized engineering analysis and design services for building improvement projects at the Telfair County Senior Center. The selected consultant will support prime contractors by contributing technical data to the Preliminary Engineering Report, developing structural specifications, and creating detailed site engineering and grading plans utilizing CAD/BIM software. Key deliverables include comprehensive engineering drawings, structural calculations, and specific technical sections of the PER. To qualify for this engagement with the Telfair County Board of Commissioners, the consultant must hold a valid Professional Engineer license and maintain Errors and Omissions insurance. This opportunity falls under NAICS code 541330, with a response deadline set for December 7, 2026.

Telfair County Board of Commissioners

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Aviation Master Planning and Demand ForecastingThis subcontract opportunity for the Texas Department of Transportation focuses on aviation master planning and demand forecasting. The selected provider will perform detailed aviation market analysis and demand forecasting for prime contractors on various airport projects. Key responsibilities include updating aviation demand forecasts, identifying current and future critical design aircraft, and conducting comprehensive airfield design and landside hangar and business market assessments. To qualify for this role, personnel must hold Professional Engineer or Certified Aviation Planner credentials. The primary deliverables for the contract consist of formal demand forecast reports and market assessment documents. Interested parties should note the response deadline of December 2, 2026, for this specialized engineering and planning effort.

Texas Department of Transportation

POSTED

about 8 hours ago

DEADLINE

Petroleum Storage Engineering ServicesThis subcontract for Petroleum Storage Engineering Services involves providing specialized engineering and specification reviews for prime contractors working on Iowa Department of Transportation projects. The scope of work focuses on the review of tank specifications and submittals specifically for petroleum and fuel storage distribution systems. To ensure technical compliance and safety, the performing party must hold a Professional Engineering license. Key deliverables for this engagement include the production of detailed engineering reports, the approval of submittals, and the provision of installation guidance. Interested parties should note that the response deadline is November 24, 2026, and the services fall under NAICS code 541330.

POSTED

about 8 hours ago

DEADLINE

Cooper City Stormwater Master Plan (H1470 | 4673-305-P14)

Solicitation # RFQ2026-2

The City of Cooper City is soliciting proposals under RFQ2026-2 for the development of a comprehensive Stormwater Master Plan covering approximately 8.5 square miles. Funded by the FEMA Hazard Mitigation Grant Program (HMGP), the project aims to identify flood-prone areas, assess water-quality practices, and improve the community's National Flood Insurance Program Community Rating System score and overall flood resiliency. The scope of work is divided into two primary tasks: the creation of a preliminary plan based on initial flood modeling and the finalization of the plan for adoption into the Local Mitigation Strategy. The total estimated value for these tasks is 281,000 dollars, with a period of performance extending from the date of execution through May 31, 2028. Proposals must be submitted via the OpenGov Procurement Portal by November 30, 2026. The selection process involves a two-tier evaluation based on methodology, work plans, and potential oral presentations, with a maximum score of 100 points. Awarded consultants must comply with various federal and state regulations, including the Davis-Bacon Act for prevailing wages, the Americans with Disabilities Act, and Florida Statutes regarding scrutinized companies. The contract includes standard provisions for termination for convenience with 14 days' notice and requires policies to be primary and non-contributory. Payment is processed within 45 days of receiving a proper invoice in accordance with the Florida Local Government Prompt Payment Act.

POSTED

about 8 hours ago

DEADLINE

Facility Condition Assessment (FCA) ServicesThis subcontract for Facility Condition Assessment (FCA) Services supports prime contractors on County of San Mateo Public Works projects. The selected provider will perform baseline assessments for approximately 4.5 million gross square feet of space, spanning general government, healthcare, and critical facilities. All work must be conducted in accordance with ASTM E2018-24 standards and utilize UniFormat II Level 3 classification. The project requires specialized expertise in critical infrastructure environments to ensure accurate data collection and reporting. Interested parties must submit their responses by December 18, 2026, for this engagement managed by the California Public Works Capital Projects agency under NAICS code 541330.

Public Works - Capital Projects

POSTED

about 8 hours ago

DEADLINE

in about 1 month

More opportunities from California → Santa Clara Valley Water District (Valley Water)

Same awarding agency

Heavy Equipment Transport and RiggingThis subcontract for Heavy Equipment Transport and Rigging supports prime contractors on Santa Clara Valley Water District pumping plant projects. The scope of work involves the removal, loading, and transport of heavy pump and valve assets, specifically 24 inch cone valves and pumps, from the plant to a repair shop and back. To execute these tasks, the contractor must utilize flatbed trailers and heavy duty cranes with a minimum capacity of 15 tons. Strict adherence to safety and regulatory standards is required, including full DOT compliance and valid rigging certifications. Interested parties must submit their responses by December 8, 2026, for this specialized logistics and rigging operation categorized under NAICS code 484220.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

in about 1 month

NSF-61 Certified Hardware and Sealant SupplyThis subcontract involves the supply of potable-water-safe hardware and chemical compounds for prime contractors working on Santa Clara Valley Water District pumping plant projects. The scope of work requires the delivery of certified materials to the repair shop, specifically focusing on NSF-61 approved anti-seize, RTV silicone sealant, and thread-locking compounds. Additionally, the provider must supply 80 durometer EPDM rubber gaskets and high-strength hardware consisting of Grade 8 SAE or Grade 10.9 Metric standards. All chemical compounds provided under this agreement must maintain strict NSF-61 Certification to ensure safety for potable water systems. The solicitation was posted on November 2, 2026, with a response deadline set for December 8, 2026. This procurement falls under NAICS code 332722 and is managed by Valley Water in California.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

in about 1 month

Third-Party Testing and NDT InspectionThis subcontract opportunity with the Santa Clara Valley Water District requires a Valley Water-approved third party to provide non-destructive testing and performance validation for pumping plant projects. The selected contractor will be responsible for conducting Magnetic Particle Inspection on couplings, keys, and keepers, as well as dye penetrant inspection on discharge head mounting flanges. Additionally, the scope of work includes performing vibration testing and hydraulic performance testing to ensure operational standards are met. The contractor is required to deliver comprehensive MPI, NDT, and vibration analysis reports. This opportunity falls under NAICS code 541380 and was posted on November 2, 2026, with a response deadline of December 8, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

in about 1 month

ASME Code Welding and Hydrostatic TestingThis subcontract for the Santa Clara Valley Water District involves providing specialized structural and pressure-boundary welding services for pumping plant projects. The scope of work includes executing weld repairs on valves and seats, as well as performing hydrostatic testing on 300 lb. class equipment using a dedicated testing rig. The selected contractor is responsible for delivering all certified weld repairs and comprehensive hydrostatic test reports. Strict technical qualifications are required for this engagement, specifically ASME R or U stamp codes. All welders must be qualified according to ASME BPVC Section IX and AWS/ASME standards. The solicitation was posted on November 2, 2026, with a response deadline of December 8, 2026, falling under NAICS code 238220.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

in about 1 month

Industrial Epoxy Coating and Surface PreparationThis subcontract for Industrial Epoxy Coating and Surface Preparation involves providing specialized coating services for prime contractors working on Santa Clara Valley Water District pumping plant projects. The scope of work includes surface preparation and the application of protective epoxy coatings to specific components, including pump columns, bowls, and cone valve components, all performed within a controlled facility. To be eligible, contractors must hold a current AMPP QP 3 shop painting accreditation and be responsible for the delivery of the finished coated components. The solicitation was posted on November 2, 2026, with a response deadline of December 8, 2026, falling under NAICS code 238320.

Painting and Wall Covering Contractors

POSTED

DEADLINE

in about 1 month

Precision Machining and Component FabricationThis subcontract for Precision Machining and Component Fabrication supports prime contractors on Santa Clara Valley Water District pumping plant projects. The scope of work involves the manufacture of replacement wear rings, shafts, and couplings, as well as the precision boring and turning of columns measuring up to 49.5 inches in diameter and 11 feet in length. The selected provider must be capable of machining components up to 120 inches long, 84 inches wide, and 96 inches high, ultimately delivering the machined replacement parts and a balancing mandrel. To meet the technical requirements of the project, the contractor must possess a multi-axis high-speed precision mill with a CAT 40 Taper or better and a table capacity of at least 25,000 lbs. This opportunity falls under NAICS code 332710, with a response deadline set for December 8, 2026.

POSTED

DEADLINE

in about 1 month

Pacheco Pumping Plant Pump 12 Rebuild

Solicitation # VW0725

Solicitation VW0725 is an invitation to bid for the Santa Clara Valley Water District to rebuild Pump 12 and a 24-inch cone valve at the Pacheco Pumping Plant in Merced County, California. The scope of work requires the contractor to provide all labor, materials, and equipment to document, remove, transport, disassemble, inspect, rebuild, reinstall, and test a 24-inch, three-stage vertical turbine pump driven by a 2,000 HP motor. The project must be completed within 170 days, including the submission of as-built reports and successful acceptance testing. Key requirements include maintaining OEM tolerances, implementing flood prevention strategies, and ensuring the rebuilt assemblies fit existing infrastructure without modifications. A third party hired by the contractor must perform start-up, commissioning, hydraulic performance, and vibration testing, while Valley Water provides crane operations and electrical disconnections. The contract will be awarded to the lowest responsive and responsible bidder based on the Base Bid Amount, with a five percent preference for Local Business Enterprises and a thirty percent minimum participation goal for the Small Business Outreach Program. Bidders must submit a Contractor Safety Qualification Packet as a condition of award and provide a two-year materials and workmanship warranty upon completion. Compliance with California Public Works laws is mandatory, including the payment of prevailing wages and adherence to apprentice employment regulations. Required submittals include a bid bond of at least 10 percent of the proposal amount, and for contracts exceeding 25,000 dollars, performance and payment bonds equal to 100 percent of the bid price. All bids must be submitted electronically via the PlanetBids portal by December 8, 2026.

Water and Sewer Line and Related Structures Construction

POSTED

DEADLINE

in about 1 month

Earlier notices in this NAICS code

Posted before this notice, open and closed

On-Call Urban Planning and Land Use Services

City of San Luis Obispo

POSTED

DEADLINE

Electrical Design and Engineering Services

City of Roseville

POSTED

DEADLINE

HVAC Design and Load Calculation Services

POSTED

DEADLINE

in about 1 month

Process Control and Instrumentation (SCADA)

Public Utilities

POSTED

DEADLINE

in about 1 month

Pavement Assessment & Engineering Services

LOWER COLORADO RIVER AUTHORITY (LCRA)

POSTED

DEADLINE

in about 1 month

Architectural & Engineering (A&E) Design Services

Housing - Administration

POSTED

DEADLINE

Airport Noise Study and Planning

POSTED

DEADLINE

in about 1 month

Airport Master Planning and Airspace Analysis

POSTED

DEADLINE

in about 1 month

Pavement & Civil Design

Transportation & Mobility

POSTED

DEADLINE

Railroad Coordination & Structural Design

Transportation & Mobility

POSTED

DEADLINE

Drainage & Hydrology Engineering

Transportation & Mobility

POSTED

DEADLINE

Geotechnical Engineering

Transportation & Mobility

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS