Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Medical Device Packaging and Marking Services

Active

Federal

Response Deadline11/09/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Medical Device Packaging and Marking Services supports prime contractors on Defense Logistics Agency Troop Support Medical Supply Chain projects. The scope of work involves performing specialized medical-grade packaging and marking to ensure medical units are retail-ready and fully compliant with Department of Defense standards. Specifically, the provider must package units into sealed containers following MIL-STD-2073-1E and MPPWN00001 guidelines while applying markings in accordance with Medical Marking Standard No. 1 using approved labeling systems and sealing equipment. The opportunity is categorized under NAICS code 485999 and is managed by the Defense Logistics Agency within the Department of Defense. Interested parties should note the response deadline of November 9, 2026. The primary objective of the contract is the delivery of medical units that meet all rigorous federal specifications for medical-grade containment and identification.

General Info

Medical device packaging and marking services for DLA projects due November 9, 2026.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

485999 - All Other Transit and Ground Passenger Transportation

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE2DS-27-T-1309.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

NEEDLE, HYPODERMIC

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 2

subcontract

Response DeadlineNov 9

Submission deadline

Response Deadline

11/09/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized medical-grade packaging and marking for prime contractors on DLA Troop Support Medical Supply Chain projects. Packages medical units into sealed containers per MIL-STD-2073-1E and MPPWN00001. Applies markings according to Medical Marking Standard No. 1 using compliant labeling systems and medical-grade sealing equipment. Delivers retail-ready, DoD-compliant packaged medical units.

Similar Contracts

Same NAICS industry code

MIL-SPEC Packaging and Marking ServicesThis subcontract opportunity is for the provision of specialized military-grade packaging and marking services to support prime contractors on projects for the DLA Weapons Support Active Devices Division. The scope of work involves packaging components in strict accordance with MIL-STD-2073-1E and utilizing industrial equipment to ensure all marking and labeling comply with MIL-STD-129. The final deliverables consist of coils that are packaged and preserved for delivery to DLA Distribution DDSP in New Cumberland, Pennsylvania. The project is designated as a total small business set-aside under NAICS code 485999. Interested parties must note that the response deadline is November 13, 2026. Performance of the contract will take place in New Cumberland, Pennsylvania, ensuring that all military specifications for preservation and transport are met for the Department of Defense.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 19 hours ago

DEADLINE

Hazardous Waste Hauling and TransportationThis subcontract for Hazardous Waste Hauling and Transportation supports California Department of Water Resources projects by transporting chemicals, oils, and heavy equipment tires from four designated sites to approved disposal facilities. The selected contractor is responsible for managing uniform hazardous waste manifests and maintaining a 24-hour emergency spill response line to ensure safety and regulatory compliance. To qualify, transporters must hold a DOT Hazmat Transporter Registration, a CA DMV Motor Carrier Permit, and a CA Highway Patrol license. The performance of these services is centered in Byron, California, with a response deadline for the solicitation set for November 18, 2026.

Department of Water Resources

POSTED

about 19 hours ago

DEADLINE

Shuttle Service

Solicitation # 19TH2027Q0006

The U.S. Embassy Bangkok is soliciting quotations for an indefinite-delivery, indefinite-quantity contract to provide shuttle services. The scope of work requires the contractor to provide drivers for both government-owned motorized three-wheeled electric vehicles (Tuk-Tuks) and contractor-owned shuttle vans. Specifically, the contractor must provide at least two full-time licensed Tuk-Tuk drivers and one backup driver to conduct 36 daily shuttle trips between the Chancery and the Rajdamri Compound. The performance period is 12 months, with a minimum guaranteed order of 50 days and a maximum of 120 days. Award will be granted to the responsible offeror submitting the lowest price for an acceptable offer. To be considered, offerors must be registered in the System for Award Management (SAM) and submit their quotations in English via email by November 12, 2026, at 4:00 PM Bangkok local time. Required submission documents include the SF-1449, pricing schedules, representations and certifications, a company profile, and evidence of a permanent business address in Thailand. Key deliverables following the award include a transition plan due within 10 days, and personnel lists, insurance evidence, and licenses due within 30 days. The contract emphasizes strict compliance with Thai law regarding commercial passenger liability insurance and requires the inclusion of Defense Base Act insurance premium costs. Performance is monitored via a Quality Assurance and Surveillance Plan, with a threshold of no more than one customer complaint per month. The contractor is also responsible for conducting background checks and providing necessary information for drivers to obtain required security clearances.

US Embassy Bangkok

POSTED

about 24 hours ago

DEADLINE

Interstate and Intra-state Youth TransportThis subcontract for Interstate and Intra-state Youth Transport involves the physical transportation of approximately 200 youth from out-of-state locations to Ohio. Working under prime contractors for the Ohio Department of Children and Youth, the provider is responsible for coordinating all travel logistics while adhering to strict safety protocols designed for children in state care. To ensure compliance and safety, personnel must undergo BCI and FBI background checks and complete specialized youth crisis transport training. The contractor is required to maintain and deliver detailed transport logs and delivery confirmations. The solicitation period is open from November 2, 2026, with a response deadline of December 2, 2026.

Department Of Children & Youth

POSTED

DEADLINE

MIL-SPEC Packaging and Export PreparationThis subcontract involves providing specialized packaging, marking, and palletization services for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div. The scope of work requires strict adherence to MIL-STD-2073-1E and MIL-STD-129 for packaging and marking, with palletization following DLA requirement RP001. Contractors must utilize MIL-SPEC materials and export-grade crating, applying preservation method 31 and cleaning/drying method 1. The ultimate objective is to deliver shipment-ready, palletized components destined for Iwakuni, Japan. This opportunity falls under NAICS code 485999 and was posted on November 1, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

RFP Shared Micromobility System

Solicitation # 27-160

The City of Syracuse, through its Department of Public Works, is soliciting proposals to designate one or more preferred vendors to own and operate a Shared Micromobility System. The selected vendor(s) will be responsible for providing micromobility units, determining the placement of stations or kiosks, and maintaining all assets to high standards of cleanliness and function, including snow and debris removal. Key deliverables include comprehensive reporting on system utilization, trip data, and customer feedback, as well as a detailed community outreach plan focused on safety and education. Equipment must meet applicable UL Listings and comply with all local laws and permitting requirements. The contract requires an initial three-year commitment with a launch date no later than Spring 2027, subject to an initial performance review after six months and subsequent yearly reviews. Proposals are due by December 4, 2026, via the OpenGov Procurement portal. Award decisions are subject to the approval of the Mayor and the Common Council, based on the vendor's competency, experience, and ability to perform the services. Selected consultants must maintain significant insurance coverage, including 1 million dollars in general liability and 2 million dollars in professional liability, and must agree to the City's audit rights and non-discrimination policies.

Department of Public Works

POSTED

DEADLINE

in about 1 month

Inmate Transportation

Solicitation # RFB-33SHF-330

Solicitation RFB-33SHF-330 is a request for bids issued by the City of Indianapolis and Marion County Purchasing Division for professional extradition and inmate transportation services for the Marion County Sheriff’s Office. The contract requires the selected vendor to maintain a ground transportation system and communication network available 24 hours a day, 7 days a week, 365 days a year. Key operational requirements include the ability to transport inmates in compliance with the Uniform Criminal Extradition Act and the Interstate Transportation of Dangerous Criminals Act of 2000, with specific security protocols for violent inmates such as the use of handcuffs, leg irons, waist chains, and brightly colored clothing. Vendors must be licensed to do business in all 50 states, hold U.S. Department of Transportation and Federal Motor Carrier Safety Administration permits, and possess at least three years of experience in inmate transportation with five law enforcement agency references. Bids are due by November 12, 2026, at 10:00 a.m. Eastern Time, and may be submitted electronically via the OpenGov portal or delivered as hard copies to the City County Purchasing Division in Indianapolis. To be considered responsive, bidders must provide an executive summary of their experience, proof of agent training, and a price sheet with unit costs that remain firm for the first year of the agreement. The City reserves the right to award the contract to one or more bidders based on a price-driven selection process. Awarded contractors must adhere to strict vehicle configurations that separate agents from male, female, and juvenile inmates and comply with all OSHA and DOT driving time regulations. Payment is issued via check, purchasing card, or ACH, provided a valid purchase order has been issued.

Purchasing Division

POSTED

DEADLINE

Juvenile Transport ServicesThis subcontract for Juvenile Transport Services supports prime contractors on projects for the Hawaii Department of Judiciary. The selected provider will be responsible for the secure and supervised transportation of juveniles from referral points to shelters, as well as to court hearings, medical appointments, and educational facilities. All transport must be conducted using vehicles specifically equipped for the safe movement of juvenile clients to ensure timely and secure delivery. To maintain safety and compliance, all drivers are required to pass comprehensive State and Federal fingerprint-based criminal history checks and CPS Central Registry screenings. This opportunity falls under NAICS code 485999, with a response deadline set for December 1, 2026.

Department of Judiciary

POSTED

DEADLINE

MIL-SPEC Packaging and Preservation ServicesThis subcontract for MIL-SPEC Packaging and Preservation Services supports prime contractors on Navsup Weapon Systems Support Mech projects for the Department of Defense. The scope of work involves performing military-grade packaging, preservation, and marking for Bulkhead units to ensure they are ready for F.O.B. Origin shipment. Technical requirements include preserving units according to MIL-STD-2073-1 and marking items in compliance with MIL-STD-129. Additionally, the contractor is responsible for applying DoD Item Unique Identifiers using durable labeling or laser etching. The opportunity was posted on October 28, 2026, with a response deadline of November 27, 2026, under NAICS code 485999.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

AFFF Collection and LogisticsThis subcontract for AFFF Collection and Logistics supports prime contractors on Ohio EPA projects by managing the physical collection and initial handling of Aqueous Film Forming Foam materials. The scope of work involves executing a milk run process to retrieve materials from airports and fire departments, utilizing vacuum trucks and overpack drums to manage various container sizes ranging from 5-gallon buckets to stationary tanks. The contractor is responsible for ensuring all materials are delivered to destruction facilities while maintaining a strict barcode-based chain-of-custody system in compliance with DOT labeling regulations. This opportunity is categorized under NAICS code 485999 and is associated with the Ohio Environmental Protection Agency.

Administrative Services, Epa-environmental Protection Agcy

POSTED

DEADLINE

University-Wide Ground Transportation Services

Solicitation # RFP-0012050-GGS-2026

The University of Michigan is soliciting proposals under RFP-0012050-GGS-2026 for comprehensive ground transportation services to support academic, research, clinical, administrative, student-life, athletic, and visitor travel. The scope of work encompasses taxi, ride-hail, executive vehicle, shuttle, and charter bus services across the Ann Arbor, Dearborn, and Flint campuses, as well as Michigan Medicine and associated health systems. While the primary focus is on Michigan, the solicitation also identifies service needs in Los Angeles, Washington DC, and other U.S. markets. Personal or departmental car rentals and pre-planned campus shuttle routes are explicitly excluded from this scope. Awards may be granted to one or more suppliers based on best value and operational fit, with evaluations focusing on supplier background, technical and operational capabilities, and a strong commitment to sustainability and environmental certifications. Proposers must submit a detailed cost proposal via a specific Pricing Workbook and provide biographies for key personnel, including account and implementation leads. The contract emphasizes strict adherence to accessibility standards, including WCAG 2.1 AA and Section 508 compliance for digital tools, and requires comprehensive insurance coverage, including specific ground transportation and potential cyber liability insurance. Administrative requirements include a mandatory Data Security Agreement for the processing of restricted University data and a documented cybersecurity program for digital platforms. Payment terms are structured as Net 0 days for those enrolled in a virtual card payment program, or Net 45 days otherwise, with payments processed via check, ACH, or wire transfer. The response deadline for this solicitation is November 13, 2026.

University of Michigan

POSTED

DEADLINE

Resident Transportation ServicesThis subcontract opportunity is for Resident Transportation Services supporting prime contractors on emergency shelter projects within the County of Cumberland, North Carolina. The selected provider will be responsible for transporting residents to and from facilities, specifically focusing on trips to medical appointments, job interviews, and other essential services during times when public transit is unavailable. Interested parties must ensure they carry commercial automobile liability insurance to meet the contract requirements. The solicitation was posted on October 23, 2026, with a response deadline of November 9, 2026. This project falls under NAICS code 485999.

County of Cumberland

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supply of Femoral Fracture Splints (CT-6)This subcontract involves the supply of specialized CT-6 femoral fracture splints for prime contractors operating under Defense Logistics Agency Troop Support medical supply contracts. The required units must be constructed from black matt carbon fiber to ensure they are temperature-stable, corrosion-resistant, and designed for minimal radar reflectivity. All materials must be marked in strict accordance with Medical Marking Standard No. 1. The scope of work specifically requires the delivery of one leg splint unit under NSN 6515015215730. This procurement falls under NAICS code 339113 and is managed by the Department of Defense. The solicitation was posted on November 2, 2026, with a response deadline of November 9, 2026.

Surgical Appliance and Supplies Manufacturing

POSTED

about 19 hours ago

DEADLINE

Intraosseous Infusion System Fast 1 SupplyThis subcontract involves the supply of the Intraosseous Infusion System Fast 1 for prime contractors delivering to the Defense Logistics Agency. The scope of work requires the provision of complete kits consisting of Luer connectors, introducers, and stainless steel bone portal tips. All delivered systems must be shipped FOB Destination and adhere to strict quality standards, including a minimum shelf life of 18 months and packaging that complies with Medical Marking Standard No. 1 and MIL-STD-2073-1E. The contract mandates full compliance with the Berry Amendment and the Buy American Act. Classified under NAICS code 423450, the opportunity was posted on November 2, 2026, with a response deadline of November 9, 2026. The primary agency overseeing the requirement is the Department of Defense through the Defense Logistics Agency.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

Vehicular Component Bracket Supply (NSN 2590-01-699-5314)This subcontract involves the fabrication or procurement of one Vehicular Component Bracket, specifically JCB Inc part number 332/F8270, for the Defense Logistics Agency Weapons Support Land Supply Chain. The contractor must ensure the component adheres to the DLA Master List of Technical and Quality Requirements and is delivered FOB Origin to Fort Riley, Kansas. The agreement mandates strict adherence to the Berry Amendment and the Buy American Act, alongside specific military standards for packaging and marking. Additionally, the provider must maintain cybersecurity compliance in accordance with NIST SP 800-171 and DFARS 252.204-7012.

Fabricated Structural Metal Manufacturing

POSTED

about 19 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services involves providing specialized military packaging for prime contractors supporting Defense Logistics Agency supply contracts. The scope of work requires the packaging of 55 brake assemblies in strict accordance with MIL-STD-2073-1E, specifically utilizing Preservation Method 10 with Wrap Mat FA and Cush/Dunn LC. All shipments must be marked according to MIL-STD-129 and must utilize approved MIL-SPEC preservatives and cushioning materials. The final objective is the delivery of shipment-ready units to DLA Distribution DDSP New Cumberland. This requirement falls under NAICS code 488510 and is managed under the Department of Defense. Interested parties should note the response deadline of November 13, 2026.

Freight Transportation Arrangement

POSTED

about 19 hours ago

DEADLINE

Supply of Brake Components (P/N B11503)This subcontract involves the manufacture and supply of internal brake components, specifically part number B11503 from Carlyle Johnson Machine Co, LLC, to support prime contractors on Defense Logistics Agency supply contracts. The selected provider must ensure all parts are manufactured in strict accordance with the metallurgy and tolerance requirements specified in the Technical Data Package. To successfully execute this contract, the provider must hold JCP certification to access necessary technical data and deliver all components accompanied by Certificates of Conformance. This requirement falls under NAICS code 332710 and is managed through the Department of Defense.

POSTED

about 19 hours ago

DEADLINE

Electric Brake Assembly Fabrication (NSN 6110-01-143-2012)This subcontract involves the manufacture and assembly of 55 electric brake assemblies for prime contractors supporting Defense Logistics Agency supply contracts. The scope of work requires the fabrication of specific components according to technical drawings 19200 12579607, 19200 12292860, 19207 12292879, and 16236 EI-011432012, utilizing precision machining and electrical integration to ensure all units are fully completed and tested. To be eligible for this effort, contractors must hold CMMC Level 2 and JCP certifications. The project falls under NAICS code 333998 and is associated with NSN 6110-01-143-2012. The response deadline for this opportunity is November 13, 2026.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 19 hours ago

DEADLINE

Manufacturer of Precision Check Valves (NSN 4820-01-348-6202)This subcontract involves the manufacture and supply of two precision check valves meeting NSN 4820-01-348-6202 specifications for prime contractors supporting the Naval Nuclear Lab via the Defense Logistics Agency. The production process must strictly avoid additive manufacturing and adhere to the Berry Amendment and Buy American Act. Performance will take place in Schenectady, New York, under NAICS code 332912. The selected provider must maintain SAE AS9003 or ISO 9001 certification and have access to the US/Canada Joint Certification Program. Additionally, all deliverables must comply with DLA Packaging RP001 and Quality RA001 requirements. Responses to this solicitation are due by November 13, 2026.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 19 hours ago

DEADLINE

Supply of LEVER (FPC) - NSN 1560LLQJ59653This subcontract involves the procurement of nine LEVER (FPC) hardware units for prime contractors supporting the Defense Logistics Agency. The selected provider is responsible for manufacturing or sourcing these components in strict accordance with NSN 1560LLQJ59653 and the DLA Master List of Technical and Quality Requirements. The contract falls under NAICS code 332510 and mandates full compliance with DFARS 252.204-7016 concerning the use of prohibited telecommunications equipment. The solicitation was posted on November 2, 2026, with a response deadline set for November 10, 2026.

Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

Disposable Nitrile Glove Kit SupplierThis subcontract involves the supply of textured nitrile rubber glove kits for prime contractors supporting Defense Logistics Agency Troop Support medical supply contracts. The manufacturer is required to produce sand-colored gloves in size large, featuring a length of 11.8 inches and specific thickness measurements of 8 mil at the fingertips, 6 mil at the palm, and 4.7 mil at the cuff. The scope of work includes the delivery of three packages of NSN 8415-01-600-0262 kits. Each kit must contain 25 individually wrapped pairs and adhere strictly to Medical Marking Standard No. 1 and RP001 palletization standards. The supplier must ensure full compliance with the Buy American Act. This procurement falls under NAICS code 339113 and is managed through the Department of Defense.

Surgical Appliance and Supplies Manufacturing

POSTED

about 19 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for the Defense Logistics Agency involves providing specialized packaging and marking services for 21 units of fragile and hazardous marine electronic components. The contractor is responsible for ensuring all items are processed according to MIL-STD-2073-1E and MIL-STD-129 standards, specifically executing Preservation Method 10 and Cleaning/Drying 1. Due to the nature of the materials, the provider must hold a valid HAZMAT shipping certification. The scope of work concludes with the delivery of the units packaged, marked, and crated for FOB Origin shipment. This requirement falls under NAICS code 561910, with a response deadline set for November 10, 2026.

Packaging and Labeling Services

POSTED

about 19 hours ago

DEADLINE

Manufacturer of Marine Navigational Lights (NSN 6220-01-211-7019)This subcontract involves the manufacture and supply of 21 Marine Navigational Lights, specifically part number M24560/9-001, for prime contractors supporting the Defense Logistics Agency. The units must be produced in strict accordance with MIL-L-24560/9B Revision B and MIL-DTL-24560A SUP 1 specifications. To ensure operational readiness and quality, the provider is required to perform First Article Testing and maintain a quality management system certified under either SAE AS9003 or ISO 9001. Compliance requirements for this engagement include adherence to the Buy American Act and NIST SP 800-171 standards for data security. The project falls under NAICS code 334511 and is managed through the Department of Defense. Interested parties must note the response deadline of November 10, 2026, to meet the procurement timeline for these critical navigational components.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE

Supply of 2-Part Adhesive Kits (NSN 8040-01-354-1934)This subcontract involves the supply of 12 specialized 2-part adhesive kits, specifically 3M part numbers 3535 A/B or EC3535 A/B, for prime contractors supporting Defense Logistics Agency Troop Support contracts. Each kit must contain one ounce of adhesive and one ounce of catalyst. To ensure product viability, the supplier must strictly adhere to a TYPE I (CODE K) non-extendable shelf life of 18 months. Eligible providers must hold authorized distributor or manufacturer status. The procurement falls under NAICS code 423610 and is managed by the Department of Defense. Interested parties must submit their responses by November 9, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS