Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Medical Equipment Maintenance & Calibration Services

Active

Federal

Response Deadline09/24/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Medical Equipment Maintenance and Calibration Services subcontract supports Defense Health Agency healthcare facility projects by providing essential preventative maintenance, validation, and calibration for sterilization systems. The scope of work includes performing routine inspections, biological indicator testing, and software updates for sterilization controllers, with a requirement for personnel to hold certifications in medical device calibration. All services must culminate in the delivery of detailed calibration reports and maintenance logs. This opportunity is associated with the Department of Defense and is located in West Point, New York, under NAICS code 811219. The solicitation was posted on September 21, 2026, with a response deadline of September 24, 2026.

General Info

Medical equipment maintenance and calibration services for DHA facilities in West Point, New York.

Agency

Department Of Defense → Defense Health AgencyView Agency

NAICS

811219 - Other Electronic and Precision Equipment Repair and MaintenanceView NAICS

Place of Performance

West Point, NY, 10996, USA

Set-Aside

NONE

Documents

This scope was carved out of HT001426QE055.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Notice of Intent to Sole Source, ENDODRY Endoscope Drying and Storage Cabinet

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 21

subcontract

Response DeadlineSep 24

Submission deadline

Response Deadline

09/24/2026, 04:00:00 PM UTCin 3 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Health Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Health Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs preventative maintenance, validation, and calibration of sterilization systems for prime contractors on Defense Health Agency (DHA) healthcare facility projects. Conducts routine inspections, biological indicator testing, and software updates for sterilization controllers. Requires certification in medical device calibration. Delivers calibration reports and maintenance logs.

Similar Contracts

Same NAICS industry code

OEM-Authorized Clinical Training and Warranty SupportThis subcontract opportunity is for the provision of OEM-authorized clinical training and warranty support for the Alcon LenSx system at the North Texas Veterans Health Care System in Dallas. The selected provider must hold official OEM authorization from Alcon to deliver technical maintenance, software updates, and specialized training programs for clinical users. The contract is designated as a sole source set-aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 811219. Key deliverables include the provision of trained clinical staff and the maintenance of a valid service and warranty agreement to ensure the operational integrity of the equipment for the Department of Veterans Affairs.

257-NETWORK Contract Office 17 (36C257)

POSTED

about 11 hours ago

DEADLINE

in about 14 hours

LenSx System Installation and Verification TestingThis subcontract involves the physical installation and technical verification of the Alcon LenSx system for the North Texas Veterans Health Care System under the Department of Veterans Affairs. The selected provider will be responsible for executing verification testing for clinical safety and operational specifications using OEM-specific diagnostic software and installation tools. A critical requirement for this engagement is obtaining OEM Authorization from Alcon to ensure the delivery of a fully operational laser system. The opportunity is designated as a Service-Disabled Veteran-Owned Small Business sole source set-aside under NAICS code 811219. Performance of the contract will take place in Dallas, Texas, with the agency's Network Contract Office 17 overseeing the project. The primary objective is to provide prime contractors with specialized technical expertise to ensure the system meets all required safety and operational standards.

257-NETWORK Contract Office 17 (36C257)

POSTED

about 11 hours ago

DEADLINE

in about 14 hours

Technical Installation and Integration SupportThis subcontract for Technical Installation and Integration Support involves the physical installation and integration of hardware and software components for prime contractors at the NIH NICHD facility in Bethesda, Maryland. The scope of work includes the installation of platform upgrade packages, advanced head coils, and gradient performance packages, utilizing specialized diagnostic tools for MRI calibration to deliver fully operational Terra.X MRI systems. The project requires the use of Siemens-certified technicians to ensure proper hardware and software integration. This opportunity is categorized under NAICS code 811219 and is associated with the Department of Health and Human Services.

National Institutes Of Health Nichd

POSTED

DEADLINE

First-Year Service and Support AgreementThe First-Year Service and Support Agreement is a subcontract with the University of Southern Mississippi focused on providing technical support and preventive maintenance for HPGe systems. The scope of work involves executing scheduled maintenance visits and emergency on-site repairs performed by factory-certified technicians utilizing specialized electronics and cryostat tools to ensure all systems are maintained to manufacturer standards. This opportunity was posted on September 18, 2026, with a response deadline of October 7, 2026. The contract falls under NAICS code 811219 and requires the delivery of detailed maintenance logs as part of the service requirements.

UNIVERSITY of SOUTHERN MISSISSIPPI

POSTED

DEADLINE

On-Site Installation and Equipment VerificationThis subcontract for the University of Southern Mississippi involves the on-site installation and technical verification of HPGe detector systems. The selected provider will be responsible for setting up detectors and electronics using specialized calibration sources and testing equipment to ensure all performance specifications are met. A factory-trained engineer is required to oversee the process and deliver a fully operational system accompanied by a signed-off installation report. The opportunity was posted on September 18, 2026, with a response deadline of October 7, 2026. It falls under NAICS code 811219 and is managed by the University of Southern Mississippi.

UNIVERSITY of SOUTHERN MISSISSIPPI

POSTED

DEADLINE

Installation and Calibration of Flow Cytometry EquipmentThis subcontract for NPL Management Limited involves the physical installation, calibration, and commissioning of flow cytometers. The selected provider will be responsible for unpacking instruments, setting up hardware, calibrating lasers and detectors, and verifying cell sorting functionality through the use of optical alignment tools and calibration beads to ensure the equipment is fully operational. The project requires the contractor to hold manufacturer technical certification to perform these specialized tasks. Interested parties must submit their responses by October 15, 2026, under NAICS code 811219. The final deliverable is a fully commissioned and calibrated instrument ready for immediate laboratory use.

NPL Management Limited

POSTED

DEADLINE

OEM-Certified Dental Equipment Technician ServicesThis subcontract for OEM-Certified Dental Equipment Technician Services supports the Billings Area Indian Health Service at the Northern Cheyenne Service Unit in Lame Deer, Montana. The selected provider will perform scheduled preventive maintenance, inspections, testing, and minor repairs for prime contractors, specifically focusing on the calibration, lubrication, and functional testing of A-dec, Dentsply, and Cavitron systems. Responsibilities include cabinetry maintenance, replacing wear items, and delivering detailed service reports to ensure all equipment remains fully operational. To qualify, technicians must hold OEM authorization and maintain strict compliance with OSHA and CDC infection control standards. The opportunity is categorized under NAICS code 811219, with a response deadline of October 19, 2026.

Billings Area Indian Health Svc

POSTED

DEADLINE

Medical Laser Installation and Delivery ServicesThis subcontract for Medical Laser Installation and Delivery Services involves the delivery, unboxing, and professional installation of the Iridex PASCAL system for prime contractors on Defense Health Agency projects at ATAMMC. The scope of work includes transporting sensitive medical optics, installing the laser system and integrated SLIT lamp, and configuring the necessary GUI and software modules to ensure a commissioned and verified system. The project requires manufacturer-certified installation technicians and specific calibration tools for 532nm wavelength verification. This opportunity is a total small business set-aside under NAICS code 811219, with a response deadline of September 24, 2026, and performance located in the 22060 zip code area.

Defense Health Agency

POSTED

DEADLINE

Antenna Coupler Repair and Modification ServicesThis subcontract for the Department of the Navy's Navsup Weapon Systems Support involves the teardown, evaluation, repair, and modification of Antenna Couplers under NSN 5985-01-463-8400. The scope of work includes disassembling units to identify failures, installing SAE-AS22759 series wiring, and performing soldering in accordance with IPC/EIAJ-STD-001C. Additionally, the contractor must apply markings per MIL-STD-130 and manage data entry through the CAV RP portal to deliver fully tested and modified equipment. The project is categorized under NAICS code 811219 and will be performed in Philadelphia, Pennsylvania. Interested parties must respond by October 19, 2026, to support prime contractors on US Navy aviation projects.

Navsup Weapon Systems Support

POSTED

DEADLINE

EDS Control Panel Repair and Overhaul ServicesThis subcontract for the Department of the Navy's Navsup Weapon Systems Support involves the technical overhaul, upgrade, and repair of EDS Control Panels, specifically part number TS00424-0400-03. The selected provider will be responsible for conducting receipt inspections, performing technical repairs, and executing acceptance testing to ensure all units are returned to Ready For Issue condition. The scope of work includes maintaining detailed historical record files and utilizing specialized test and tooling equipment to meet project requirements. The contract requires strict adherence to ISO 9001 or SAE AS9100 quality standards and MIL-STD-130 marking specifications. Performance will take place in Philadelphia, with the final deliverables consisting of the repaired panels and their associated record files. Interested parties must respond by October 19, 2026, under NAICS code 811219.

Navsup Weapon Systems Support

POSTED

DEADLINE

ICC Chair Technical Repair and Overhaul ServicesThe ICC Chair Technical Repair and Overhaul Services subcontract involves the teardown, evaluation, and physical repair or modification of ICC Chair units for prime contractors on NAVSUP WSS projects. The contractor is responsible for the complete teardown of NSN 2090-01-630-6154, assessing components for wear or damage, and performing repairs to meet operational specifications. Additionally, the scope includes applying DLR labeling to units and shipping containers, with a final delivery requirement of 100 repaired and modified ICC Chairs. This project is managed by the Department of the Navy under the Navsup Weapon Systems Support Mech agency and falls under NAICS code 811219. The place of performance is located in Mechanicsburg, Pennsylvania. The solicitation was posted on September 18, 2026, with a response deadline of September 25, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Lab Equipment Installation and Calibration ServicesThis subcontract for Lab Equipment Installation and Calibration Services involves the physical installation, calibration, and validation of Bio-Rad equipment for prime contractors on Alabama Clinical Laboratory Services projects. The scope of work includes unpacking, assembling, configuring software, and verifying system performance through the use of diagnostic software and calibration tools to ensure a fully operational laboratory system. The project requires the use of manufacturer-certified Bio-Rad technicians to execute these services. Interested parties must note the response deadline of September 23, 2026, for this opportunity associated with NAICS code 811219.

Clinical Laboratory Services

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Health Agency

Same awarding agency

Specialized Medical Plumbing/Utility IntegrationThis subcontract for the Defense Health Agency involves specialized medical plumbing and utility integration at a facility in West Point. The selected provider will support prime contractors by installing high-pressure steam piping, water filtration systems, and drainage specifically for medical sterilizers, ensuring all utility connections to sterilization equipment are certified. Qualified candidates must be licensed master plumbers with documented experience in medical-grade piping and adherence to DHA facility standards. The opportunity is categorized under NAICS code 238220, with a response deadline of September 24, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 11 hours ago

DEADLINE

Medical Sterilization Equipment Supply & InstallationThis subcontract for the Defense Health Agency involves the supply and installation of specialized medical sterilization equipment for healthcare facility projects in West Point, New York. The scope of work includes delivering medical sterilization hardware, performing the physical installation, and conducting initial calibration to ensure a fully operational system. The contractor must ensure all work complies with medical device regulations and healthcare facility safety standards. This opportunity is categorized under NAICS code 423450, with a response deadline of September 24, 2026.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 11 hours ago

DEADLINE

Notice of Intent to Sole Source, ENDODRY Endoscope Drying and Storage Cabinet

Solicitation # HT001426QE055

The Defense Health Agency, through the Healthcare Contracting Division - Northeast, intends to award a Firm Fixed Price Purchase Order on a sole source basis to Steris Corporation for the procurement and installation of one ENDODRY Endoscope Drying and Storage Cabinet. This equipment is designated as critical infrastructure for the safe drying and storage of flexible endoscopes following high-level reprocessing and will be installed at the Keller Army Community Hospital in West Point, New York. The government is utilizing the authority of Title 41 U.S.C. 1901(e)(2) and FAR 12.102(a) for acquisitions at or below the simplified acquisition threshold, citing that only one responsible source can satisfy the agency's requirements without causing unacceptable delays or substantial duplication of costs. While the intent is to sole source to Steris Corporation, the agency will consider capability statements, proposals, or quotations from other responsible sources. Inquiries and submissions should be directed to Contracting Officer Sara Fetterolf or Contract Specialist Mohamed Koroma, referencing the Notice ID number in the subject line.

Surgical Appliance and Supplies Manufacturing

POSTED

about 11 hours ago

DEADLINE

Request for Information - Data Abstraction Services

Solicitation # PANDHA26P0000042277

The Defense Health Agency is seeking contractor support for data abstraction services to populate and maintain the Defense and Veterans Eye Injury and Vision Registry (DVEIVR). This joint DoD and VA web-based repository tracks ocular injuries, diagnoses, treatments, and outcomes for Service Members and Veterans to support the DoD Vision Center of Excellence in improving vision health, operational readiness, and research. The scope of work includes extracting clinical data from systems such as MHS GENESIS, VistA, and AHLTA, developing standard operating procedures and business rules, and conducting quality monitoring and auditing. All work is to be performed at the Vision Center of Excellence facility. This effort is currently in the Request for Information stage under solicitation PANDHA26P0000042277, with a designated 8(a) set-aside. Key performance requirements include a minimum 98 percent data abstraction accuracy rate, with specific productivity targets such as abstracting one relevant encounter per hour or 32 per week. Key personnel requirements include a Project Manager, Trainer, and Level 4 Subject Matter Experts who must be operationally ready on day one. The contractor must adhere to strict security and compliance standards, including HIPAA Privacy Rule compliance and DoD cybersecurity regulations. The current incumbent for these services is Sugpiat Defense, LLC.

All Other Professional, Scientific, and Technical Services

POSTED

about 11 hours ago

DEADLINE

Supply of Lumenis BE Stellar M22 Multi-Platform Laser SystemsThis subcontract involves the supply of two Lumenis BE Stellar M22 Multi-Platform Laser Systems for prime contractors supporting Defense Health Agency medical equipment procurements. Each system must be fully configured and operational, integrating Expert Pulse Light, YAG, ResurfX, and Qswitch modules, along with Acne and VASC Filters. All equipment is required to adhere to Lumenis technical specifications and medical device safety standards, with delivery provided FOB Destination. The opportunity is designated as a Service-Disabled Veteran-Owned Small Business sole source under NAICS code 423450. Performance is centered in Bethesda, Maryland, with a response deadline of September 24, 2026. This procurement ensures the delivery of high-specification medical laser technology to support Department of Defense healthcare initiatives.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

Single-Drop Blood Sample Interface Supply/DesignThis subcontract through the Defense Health Agency involves the design and supply of microfluidic interfaces for prime contractors working on Walter Reed Army Institute of Research projects. The primary objective is to develop a microfluidic sample handling component that utilizes microfluidic chips, capillary interfaces, and biocompatible polymers to ensure a single drop of blood is efficiently delivered to the RapiOmics assay. All work must adhere to precision fluidics standards to ensure the accuracy and reliability of the sample delivery system. The opportunity is categorized under NAICS code 339113, with a response deadline of November 2, 2026.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

in about 1 month

SeptiBurnAlert Handheld Platform EngineeringThe SeptiBurnAlert Handheld Platform Engineering subcontract, issued by the Defense Health Agency under the Department of Defense, focuses on the design and manufacture of handheld hardware platforms for prime contractors supporting Walter Reed Army Institute of Research projects. The primary objective is to engineer a device that utilizes low-power electronics and integrated power supplies to maintain ambient stability and minimize user intervention, eliminating the need for specialized storage. The project requires strict adherence to medical device hardware standards to ensure the delivery of a handheld platform fully integrated with the associated assay. This effort falls under NAICS code 339113 and is scheduled for a response deadline of November 2, 2026.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

in about 1 month

RapiOmics Assay Prototype DevelopmentThis subcontract involves performing biochemical research and development for prime contractors supporting projects at the Walter Reed Army Institute of Research. The primary objective is to develop the RapiOmics assay prototype, a diagnostic tool designed to process a single drop of blood and deliver results within one hour through the use of microfluidic assay components and omics-based diagnostic reagents. The project is managed under the Defense Health Agency within the Department of Defense and requires adherence to strict biotechnology R&D performance specifications. The final deliverable is a functional prototype of the RapiOmics assay, with the procurement process falling under NAICS code 541714.

Research and Development in Biotechnology (except Nanobiotechnology)

POSTED

DEADLINE

in about 1 month

Supply of STERIS AMSCO Replacement Parts and ComponentsThis subcontract through the Defense Health Agency involves the supply of genuine OEM replacement parts, subassemblies, and components for prime contractors supporting 6th Medical Group projects at MacDill AFB in Tampa, Florida. The scope specifically focuses on providing hardware for STERIS AMSCO 400 Series 20 Sterilizers and AMSCO 2532 Washers, with all items required to meet OEM specifications and comply with FAR 2.101 Unique Item Identifier requirements. The opportunity is categorized under NAICS code 423490 and was posted on September 18, 2026, with a response deadline of September 25, 2026. The selected provider will be responsible for the delivery of all specified hardware and parts directly to MacDill AFB.

Other Professional Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

Preventive and Corrective Maintenance for STERIS AMSCO Sterilizers and WashersThis subcontract with the Defense Health Agency involves providing preventive and corrective maintenance, calibration, and diagnostic services for the 6th Medical Group at MacDill AFB in Tampa, Florida. The scope of work specifically covers two STERIS AMSCO 400 Series 20 Small Steam Sterilizers and two STERIS AMSCO 2532 Single-Chamber Washer/Disinfectors. All services must adhere to ISO 9001 and AAMI ST-79:2012 Part 7:7 standards. The contractor is responsible for delivering completed maintenance and detailed Field Service Reports. The opportunity falls under NAICS code 811210 and requires a response by September 25, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Iridex PASCAL Synthesis 532nm Photocoagulator Laser System SupplyThis subcontract opportunity is for the supply of a complete Iridex PASCAL GenM 532nm Photocoagulator Laser System and associated medical components to support Defense Health Agency projects at ATAMMC. The procurement includes the main laser system, Micropulse Module software IQ532, RFID LIO, CE Mark safety glasses, and wireless footswitches. The successful provider must deliver a fully operational system while adhering to Brand Name or Equal specifications and FAR 52.204-25 compliance. The contract is designated as a total Small Business Set Aside under NAICS code 423450. It is managed by the Department of Defense for the Defense Health Agency, with performance taking place in zip code 22060. Interested parties must submit their responses by the deadline of September 24, 2026.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS