Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Medium-Temperature Indoor Air Condensing Units and Coil Sets

Active

International

Response Deadline11/12/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture and delivery of 10 complete medium-temperature indoor air condensing units and matching coil sets for Department of National Defence training projects in New Brunswick, Canada. The units must be designed to maintain saturated suction temperatures between 20°F and 25°F, utilizing spiral compressors and single-phase air defrost evaporators. To support educational objectives, the equipment must ensure all valves and terminals remain visible for trainees and be compatible with R-448A or R-449A refrigerants. The procurement is categorized under NAICS code 333413 and is intended for prime contractors managing these government training initiatives. Interested parties should note the response deadline of November 12, 2026, for this specific equipment supply requirement.

General Info

Manufacture 10 air condensing units and coils for Canada DND training by 2026.

Agency

Government of Canada → Department of National Defence

NAICS

333413 - Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

Place of Performance

Canada, New Brunswick, CAN

Set-Aside

NONE

Documents

This scope was carved out of W2037-27-0480.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Refrigeration Training Equipment

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 27

subcontract

Response DeadlineNov 12

Submission deadline

Response Deadline

11/12/2026, 06:00:00 PM UTCin 15 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → Department of National Defence

ContactsNo contacts available

OfficeN/A

Organization / AgencyGovernment of Canada → Department of National Defence

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies medium-temperature indoor air condensing units and matching coil sets for prime contractors on Department of National Defence (Canada) training projects. Manufactures units maintaining saturated suction temperatures of 20°F to 25°F using spiral compressors and single-phase air defrost evaporators compatible with R-448A or R-449A refrigerants. Ensures all terminals and valves are visible for trainee learning. Delivers 10 complete units.

Similar Contracts

Same NAICS industry code

Solicitation # SPE8E7-26-T-3932

Solicitation SPE8E7-26-T-3932 is a simplified acquisition issued by the Defense Logistics Agency for the procurement of three vaneaxial fans, identified by NSN 4140-01-458-9626. The contract is established under NAICS code 333413 and requires delivery to DLA Distribution San Diego. The required delivery date is September 13, 2027, with a need ship date of March 1, 2027, and a delivery window of 153 days after the award. Terms are set as FOB Origin, with both inspection and acceptance occurring at the destination. The procurement is subject to rigorous quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. It incorporates several DLA master technical requirements, such as RA001 for quality and RD003 for covered defense information. Compliance with the Buy American Act and the Berry Amendment is required for quotes exceeding the micro-purchase threshold. Administrative requirements include electronic invoicing through the Wide Area Workflow system and mandatory registration in the System for Award Management. All quotes must be submitted via the DLA Internet Bid Board System.

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE8E7-27-T-0202

Solicitation SPE8E7-27-T-0202 is a request for quotations issued by DLA Troop Support Construction and Equipment for the procurement of 11 vaneaxial fans, identified by NSN 4140011914765. The requirement is managed under the First Destination Transportation program with delivery terms set as FOB Origin. The need ship date is April 12, 2027, with a final required delivery date of June 3, 2027. Inspection and acceptance will occur at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements, including the submission of Source Approval Request documentation and a CMMC Level 2 Self-Assessment. Contractors must comply with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, while avoiding the use of plastics for wrapping or cushioning. Additionally, the solicitation prohibits the intentional addition of mercury to hardware and requires compliance with various FAR and DFARS clauses regarding cybersecurity, hazardous material identification, and domestic sourcing restrictions. All quotes must be submitted electronically via the DIBBS system.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE8E7-27-T-0173

Solicitation SPE8E7-27-T-0173 is a fixed-price request for quotation issued by DLA Troop Support for one vaneaxial fan, identified by NSN 4140-01-277-5930 and part number A20AW48. The required hardware must be a single-speed, 440 volts AC, 60 Hz, 3-phase unit compliant with basic specification MIL-PRF-18953C. A critical requirement for this acquisition is that the manufacturer must be Qualified Products List approved at the time of contract award. The item is to be delivered FOB Origin to the DLA Distribution New Cumberland Facility in Pennsylvania, with a required delivery date of February 25, 2028, and a need ship date of April 12, 2027. The contract mandates strict adherence to technical and quality standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and MIL-F-18953 for packaging requirements. Environmental restrictions prohibit the intentional addition of mercury or mercury-containing compounds, and the use of plastics for wrapping or cushioning should be avoided. Inspection and acceptance will occur at the destination. Offerors must submit quotes via the DIBBS system by October 26, 2026, and must comply with various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS requirements for safeguarding covered defense information. Invoicing and payment shall be processed electronically through the Wide Area WorkFlow system.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 16 hours ago

DEADLINE

FAN, CENTRIFUGAL

Solicitation # SPE8E7-27-T-0131

Solicitation SPE8E7-27-T-0131 is a fixed-price contract for the procurement of one centrifugal fan with counter-clockwise rotation and upblast discharge direction, identified by NSN 4140012781310 and part number B3733. The item is to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with a need ship date of March 28, 2027, and an original required delivery date of August 19, 2027. The contract is established under NAICS code 333413 and specifies FOB Origin terms, with both inspection and acceptance occurring at the destination. The contractor must adhere to strict technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Specific requirements include the use of DLA packaging standards (RP001), the removal of government identification from non-accepted supplies (RQ011), and documentation for source approval requests (RC001). Environmental guidelines mandate avoiding plastics for wrapping and cushioning whenever possible. Administrative compliance requires the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and adherence to the Buy American Act and Berry Amendment regarding domestic material restrictions. Offers produced via additive manufacturing are ineligible for award.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE8E7-27-T-0205

Solicitation SPE87-27-T-0205 is a fixed-price contract issued by the Department of Defense, specifically DLA Troop Support Construction and Equipment, for the procurement of three tubeaxial fans under NSN 4140-01-199-3590. The requirement specifies parts from Rotron Incorporated (P/N 03437400) or Northrop Grumman Support Services Corp (P/N 645A625H01). The procurement is categorized under NAICS code 333413 and includes specific requirements for critical application items. Delivery is set for 167 days after award, with a need ship date of April 12, 2027, and an original required delivery date of July 14, 2027. The contract mandates that supplies be delivered FOB Origin, with inspection and acceptance occurring at the destination, the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must adhere to MIL-STD-129. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The solicitation also incorporates various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and safeguarding covered defense information.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 16 hours ago

DEADLINE

HOUSING, CENTRIFUGAL FA

Solicitation # SPE8E7-27-T-0123

Solicitation SPE8E7-27-T-0123 is a fixed-price request for quotations issued by DLA Troop Support for the procurement of eight centrifugal fan housings, identified by NSN 4140-01-527-6186. The contract requires a Certificate of Conformance and adherence to specific technical drawings and quality standards, including a manufacturer inspection system that complies with SAE AS9003 or ISO 9001 tailored to SAE AS9003. Delivery is set for a need ship date of March 28, 2027, with a final required delivery date of June 26, 2027, shipping FOB Destination to DLA Distribution San Joaquin in Tracy, California. The procurement incorporates strict packaging and marking requirements per RP001 and MIL-STD-129, with specific mandates for hazardous material labeling under the Hazard Communication Standard. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Evaluation may include a price preference for certified HUBZone Small Business Concerns, though offers utilizing additive manufacturing are ineligible for award. All payment requests and receiving reports must be submitted electronically via Wide Area WorkFlow.

DLA DIST SAN JOAQUIN

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE8E7-27-T-0149

Solicitation SPE8E7-27-T-0149 is a fixed-price, total small business set-aside request for quotation issued by DLA Troop Support Construction and Equipment for one vaneaxial fan, identified by NSN 4140-01-477-7220. The procurement is categorized under NAICS 333413 and requires submissions through the DLA Internet Bid Board System. Key delivery milestones include a need ship date of April 12, 2027, and an original required delivery date of October 18, 2027, with shipping terms set as FOB Origin. The item is to be delivered to DLA Distribution Puget Sound in Bremerton, Washington, where both inspection and acceptance will occur. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, specifically referencing RC001 for source approval documentation and RA001 for general quality standards. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with palletization following RP001 guidelines. Additionally, the contractor must utilize the Wide Area WorkFlow system for invoicing and payment. Compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information is required. Hazardous materials, if applicable, must be labeled per the Hazard Communication Standard and accompanied by a Material Safety Data Sheet.

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE8E7-27-T-0184

Solicitation SPE8E7-27-T-0184 is a fixed-price request for quotations issued by DLA Troop Support Construction and Equipment for the procurement of two vaneaxial fans under NSN 4140016756709. The required hardware must meet specifications for FM AF, LLC 75477 part numbers 500706-8722 and CD-3782 REV D. This acquisition is designated as a total small business set-aside under NAICS code 333413, with quotes required to be submitted via the DLA Internet Bid Board System by October 26, 2026. The contract specifies a delivery timeline of 167 days after order, with a need ship date of April 12, 2027, and a required delivery date of June 27, 2027. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution San Joaquin in Tracy, California. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, and palletization must comply with DLA packaging requirements. Compliance with the Buy American Act and the Berry Amendment is mandatory for quotes above the micro-purchase threshold. Additionally, the contractor must adhere to cybersecurity standards, including DFARS 252.204-7012 for safeguarding covered defense information. Invoicing and payment processing are to be managed electronically through the Wide Area WorkFlow system.

DLA DIST SAN JOAQUIN

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE8E7-27-T-0206

Solicitation SPE8E7-27-T-0206 is a fixed-price contract for the procurement of one vaneaxial fan, identified by NSN 4140-01-300-8058, for non-nuclear applications. The unit must operate at 440 Volts AC, 60 Hz, 3 Phase, Single Speed. The manufacturer must be QPL approved at the time of award. Technical specifications are governed by MIL-F-18953B with extensive modifications regarding primer coatings, specifically requiring TT-P-645, and updated drawing references. Performance is measured against drawing 803-921784, with a volumetric flow rate tolerance of -2% to +5% of the base curve. The contract mandates a rigorous testing sequence including balance, casing tightness, blade tip clearance, performance, noise, and vibration tests, with specific exploratory vibration frequencies from 4 Hz to 33 Hz per MIL-STD-167-1. Delivery is required within 167 days ADO to the DLA Distribution New Cumberland facility, with FOB Origin terms. Inspection and acceptance will occur at the destination. Packaging and marking must comply with RP001, MIL-F-18953, and MIL-STD-129. Invoicing is to be processed electronically via the Wide Area WorkFlow system. The solicitation is categorized under NAICS code 333413 and includes standard FAR and DFARS clauses regarding cybersecurity, domestic sourcing, and equal opportunity.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE8E7-27-T-0255

DDSP NEW CUMBERLAND FACILITY

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE8E7-27-T-0023

Solicitation SPE8E7-27-T-0023 is a request for quotations issued by DLA Troop Support Construction and Equipment for the procurement of five vaneaxial fans, identified by NSN 4140-01-191-4765. The requirement specifies a need ship date of March 28, 2027, with an original required delivery date of May 20, 2027. Delivery is set for FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The procurement is governed by NAICS code 333413 and requires quotes to be submitted electronically via the DLA Internet Bid Board System. The contract mandates strict adherence to several technical and security standards, including a CMMC Level 2 Self-Assessment and compliance with Covered Defense Information requirements. Technical and quality specifications are incorporated by reference through the DLA Master List, and the contractor must follow MIL-STD-129 and MIL-STD-129K for marking, while adhering to RP001 for packaging. Notably, the use of plastics for wrapping or cushioning should be avoided where possible. Environmental restrictions prohibit the intentional addition of mercury or mercury-containing compounds to the hardware. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act and DFARS 252.225-7036.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE8E7-27-T-0258

Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

Aviation Component Freight and Customs BrokerageThe Aviation Component Freight and Customs Brokerage subcontract involves providing international transport and customs clearance services for Department of National Defence aircraft projects. The scope of work focuses on coordinating the shipping of braking assemblies and heavy aircraft components between Canada, the USA, and EASA jurisdictions, utilizing FCA Incoterms 2000. The successful provider must maintain status as an authorized commercial carrier and a licensed customs broker to ensure all components are delivered to ASD or Contractor destinations with complete customs documentation. This opportunity is categorized under NAICS code 488190 and is managed by the Government of Canada. Interested parties must submit their responses by November 23, 2026. Performance of the contract will take place within Canada, supporting prime contractors in the movement of critical aviation hardware across international borders.

Other Support Activities for Air Transportation

POSTED

DEADLINE

Supply of OEM Meggitt Braking ComponentsThis subcontract involves the procurement and delivery of new or OEM-approved replacement parts for aircraft projects managed by the Department of National Defence in Canada. The primary scope of work focuses on the supply of original Meggitt Aircraft Braking Systems components, specifically tungsten-carbide coated rotor channels. All supplied parts must be delivered to the designated MRO facility. To ensure quality and regulatory compliance, the supplier is required to provide a Manufacturer's Statement of Conformity along with FAA 8130-3 or EASA Form One documentation. Additionally, Certificates of Conformance must accompany the delivery of all new OEM parts. The contract is categorized under NAICS code 336413 and is managed through the Government of Canada.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Aircraft Brake Assembly Maintenance and Repair (MRO)This subcontract involves the technical overhaul, repair, and certification of unserviceable braking assemblies for prime contractors supporting Department of National Defence aircraft projects in Canada. The selected provider must perform all work according to Meggitt Aircraft Braking Systems OEM specifications, utilizing OEM-approved parts and specialized tooling for tungsten-carbide coated rotor channels. Additionally, the contractor is responsible for incorporating all relevant Airworthiness Directives from Transport Canada, the FAA, or EASA. To qualify, the provider must hold FAA Part 145, EASA part-145 AMO, or CAR 573 certification. All delivered brake assemblies must be certified as airworthy and accompanied by FAA 8130-3 or EASA Form One certificates. The solicitation was posted on October 27, 2026, with a response deadline of November 23, 2026.

Other Airport Operations

POSTED

DEADLINE

Refrigeration Equipment Familiarization TrainingThis subcontract involves providing specialized technical familiarization training for prime contractors working on Department of National Defence projects in New Brunswick, Canada. The selected provider will conduct detailed technical walkthroughs of delivered refrigeration units, focusing on the operation of valves, terminals, and orifices. A critical requirement for this engagement is subject matter expertise in R-448A and R-449A systems to ensure trainees are properly equipped to handle the equipment. The primary deliverables for this contract include the successful execution of familiarization sessions and the provision of comprehensive technical user manuals. Interested parties should note that the response deadline is November 12, 2026, and the work falls under NAICS code 611519.

Other Technical and Trade Schools

POSTED

DEADLINE

DDP Freight Shipping to Oromocto, NBThis subcontract involves the transportation of refrigeration equipment for prime contractors working on Department of National Defence projects. The scope of work requires hauling industrial equipment from the manufacturer to the CFSME facility located in Oromocto, New Brunswick. The contractor is responsible for managing all customs and duties in accordance with Incoterms 2020 DDP and must ensure equipment is delivered and staged at the final destination. To meet operational and environmental requirements, the contractor must utilize freight trucks specifically equipped for industrial transport and employ reusable or recyclable packaging to align with green procurement standards. This opportunity falls under NAICS code 484220, with a response deadline set for November 12, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Low-Temperature Indoor Air Condensing Units and Coil SetsThis subcontract involves the manufacture and supply of two complete low-temperature indoor air condensing units and matching coil sets for Department of National Defence training projects in New Brunswick, Canada. The equipment must be compatible with R-448A or R-449A refrigerants and capable of maintaining saturated suction temperatures between -15°F and -20°F for 6ft x 6ft x 7ft isothermal chambers. A critical requirement of the design is that all components must remain accessible to facilitate trainee learning. The procurement process is managed under NAICS code 333413, with a response deadline set for November 12, 2026.

Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

DEADLINE

Remote-TFT Spray Nozzles and Temperature Switches SupplyThis subcontract involves the procurement and delivery of precision remote-TFT spray nozzles and temperature monitoring sensors for ground support equipment projects managed by the Department of National Defence in Canada. The supplier is responsible for sourcing components that conform to the most current applicable drawings and specifications, ensuring all hardware meets the rigorous standards required for military support operations. The scope of work includes the delivery of these new nozzles and sensors directly to CF Supply Depots. Performance of the contract is centered in Canada, specifically within Edmonton and Quebec. This procurement effort supports prime contractors in maintaining and upgrading critical ground support infrastructure for the Government of Canada.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Hydraulic Motors and Pump Assemblies SupplyThis subcontract involves the sourcing and delivery of high-pressure hydraulic motors and fluid pump assemblies to support Department of National Defence ground support equipment projects. The scope of work includes providing rotary pump units, centrifugal pump units, and pump assemblies specifically designed for Hardi anti-ice type 4 and Myers de-ice type 1 systems. All supplied components must adhere to mandatory performance criteria tailored to specific anti-ice fluid types and are to be delivered to CF Supply Depots. The contract is managed under NAICS code 333911 with performance taking place in Edmonton and Quebec. Interested parties must note the response deadline of November 2, 2026. This procurement ensures that prime contractors have the necessary specialized hydraulic components to maintain critical de-icing and anti-icing capabilities for Canadian military ground equipment.

Pump and Pumping Equipment Manufacturing

POSTED

DEADLINE

Fluid and Air Filtration Elements SupplyThis subcontract involves the supply of industrial-grade fluid and air filtration elements to prime contractors supporting Department of National Defence ground support equipment projects in Canada. The scope specifically requires the sourcing and delivery of intake air cleaner filter elements and fluid filter elements, identified by NSN 4330-01-492-6796, part number LF3970, and NCAGE 33547. All new filter elements must be delivered to CF Supply Depots, with performance locations spanning Edmonton, Quebec, and other regions outside the National Capital Region. To ensure compliance with international shipping regulations, all wooden pallets used for transport must adhere to ISPM 15 standards.

Industrial Valve Manufacturing

POSTED

DEADLINE

Electrical Switches and Circuit Breakers SupplyThis subcontract involves the procurement and delivery of specialized electrical control components for the Government of Canada's Department of National Defence. The scope of work focuses on sourcing new rotary switches and circuit breakers that adhere to original equipment manufacturer performance criteria specifically for 2021 Global Ground Support Ultimate 2200 XR vehicles. The selected supplier is responsible for delivering these components to CF Supply Depots, with performance taking place in Edmonton and Quebec. This requirement falls under NAICS code 423610 and is intended to support prime contractors managing ground support equipment projects.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Braking Assemblies –Advance Exchange Services

Solicitation # T8493-26-0017

The Department of National Defence, through the Aircraft Services Directorate, is soliciting a firm, fixed, all-inclusive contract for advance exchange services for braking assemblies. The contract runs from the date of award until March 31, 2029, with an irrevocable option for Canada to extend the term by one additional year. Services are provided on an as-needed basis via task authorizations, with a general requirement for advance exchange components to be delivered within two weeks of the task authorization receipt. All work must be performed off-site and adhere to the latest Meggitt Aircraft Braking Systems OEM specifications and applicable airworthiness directives from Transport Canada, the FAA, or EASA. To be eligible, bidders must hold valid certifications from an FAA Part 145, EASA part-145 AMO, or CAR 573 Approved Maintenance Organization. The contract will be awarded to the responsive bidder that meets all mandatory technical criteria and offers the lowest evaluated price. Deliverables must include specific airworthiness documentation, such as FAA 8130-3 or EASA Form One certificates, and all shipping must be conducted UNINSURED under FCA Incoterms 2000. Payment is contingent upon government acceptance of the work and requires detailed supporting documentation, including tear down reports and airworthiness certifications.

POSTED

DEADLINE

Solicitation # W8482-275593/A

The Department of National Defence is soliciting offers for the procurement of various valve parts to be delivered to CFB Halifax, Nova Scotia, and CFB Esquimalt, British Columbia. The requirement includes butterfly valves with Monel discs from Bray Controls Canada Ltd, stop-check valves and special shaped actuator valve diaphragms from Montreal Bronze Ltd, and saddle valves from Swagelok Co. Bids will be assessed on a Delivery Duty Paid basis, and the award will be based on the lowest evaluated price on an item-by-item basis, with the possibility of multiple contracts being awarded. The contract is governed by the Defence Production Act and includes specific requirements for priority ratings for both U.S. and Canadian-based contractors. Quality standards are stringent, requiring compliance with ISO 9001:2015 and specific packaging and marking standards such as MIL-STD-2073 for U.S. contractors and NATO standards for EU contractors. Any proposed equivalent products must meet Specification D-03-003-007/SG-000 Grade 1 Type A and provide certification of shock testing. Offerors must submit a technical offer and a financial offer, including the Offeror Submission Details in both spreadsheet and PDF formats, by the deadline of November 16, 2026.

Industrial Valve Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS