Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on December 15, 2020. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Meeting, Education, Training, and Collaboration Facility

Awarded
N0017421D0003Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 531120
New
Federal
Training Area Land LeaseThis subcontract, issued by HQ USSOCOM under the Department of Defense, secures the legal right of entry and use of a land area or facility for prime contractors conducting training projects. The agreement specifically requires a training area located within two hours of Hunter Airfield in Savannah, Georgia, with the designated place of performance situated in Barnwell. The contract grants either exclusive or shared access to a land parcel for the purpose of Crisis Response Training. This access is strictly limited to the period between December 5 and December 11, 2026. The opportunity is categorized under NAICS code 531120, focusing on the leasing of land for specialized military training operations.
Hq Ussocom

POSTED

about 12 hours ago

DEADLINE

in 6 days
NAICS: 531120
New
Federal
VHA seeking 20,250 RSF for a Community Based Outreach Clinic in Twin Falls, ID
Solicitation # 36C24W26R0017
The Department of Veterans Affairs, through RPO West, is soliciting proposals for the lease of approximately 15,000 to 20,250 square feet of contiguous space to establish a Community Based Outpatient Clinic (CBOC) in Twin Falls, Idaho. This procurement is designated as a Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside. The government seeks a fully serviced lease with a 20-year total term, including a 10-year firm period, and requires at least 50 parking spaces. The facility will house a variety of clinical and support services, including an Outpatient/PACT clinic, mental health services, pharmacy, laboratory medicine, and a canteen. The project involves stringent design and construction standards, including compliance with USP 800 clean air requirements for pharmacy compounding, VA Facility Security Level II standards, and specific seismic design requirements. Offerors must provide a comprehensive design team covering architecture, civil, mechanical, electrical, and low-voltage engineering. The government has established a Tenant Improvement (TI) allowance of $354.16 per ABOA square foot. Proposals will be evaluated based on a best-value tradeoff process, weighing price against technical factors such as architectural concept, site characteristics, and neighborhood compatibility. Submissions must be delivered in two separate volumes, technical and price, by the revised deadline of October 27, 2026.
Rpo West (36C24W)

POSTED

about 12 hours ago

DEADLINE

in 21 days
NAICS: 531120
New
Federal
Retail Space for Lease in Los Angeles
Solicitation # DACA095270087900
The U.S. Army Corps of Engineers, Los Angeles District, is soliciting proposals for a full-service lease of Class A or B retail space to establish an Armed Forces Career Center in Los Angeles, California. The required space must be between 868 and 1,151 square feet and be located within a specific delineated area bounded by Weyburn Avenue to the north, Wilshire Boulevard to the south, Westwood Boulevard to the east, and Veteran Avenue to the west. The lease term is not to exceed five years and must include government termination rights. The facility must be located in a compatible business area, away from sexually oriented businesses, bars, or dispensaries, and must be accessible via mass transit within three walking blocks. Key requirements include a primary and secondary point of ingress/egress, 24/7 lighted parking for four government vehicles, and additional parking for employees and visitors. The lessor is responsible for a turnkey build-out conforming to construction and security specifications, including ADA/ABAAS compliance and seismic standards. Award will be based on the most advantageous offer, balancing price—including rent, utilities, and janitorial services—with technical factors such as neighborhood quality, ease of access, and building appearance. Proposals are due by 5:00 PM Pacific Time on October 27, 2026, and must include a signed Proposal to Lease Space form, as-built floor plans, and a completed seismic offer form.
W075 Endist Los Angeles

POSTED

about 12 hours ago

DEADLINE

in 7 days
NAICS: 531120
New
SLED
REQUEST FOR LEASE PROPOSALS FOR OFFICE SPACE IN CHARLESTON COUNTY FOR THE SOUTH CAROLINA DEPARTMENT OF INSURANCE
Solicitation # R200-112026
The South Carolina Department of Administration, Real Property Services, is soliciting proposals for approximately 1,550 rentable square feet of office space in Charleston County for the South Carolina Department of Insurance. The state is seeking a gross lease that includes all operating expenses, such as utilities, janitorial services, and maintenance, with a target occupancy date of September 1, 2027. Proposers must provide rates for lease terms of one, three, or five years. The required space must include specific layouts such as private offices, a reception area, a conference room, a work room, a copy/supply room, and a beverage alcove. Technical requirements include CAT-6 certified cabling with landlord-provided terminations, fiber optic network access, and VOIP support. Additionally, the landlord is responsible for all costs associated with ensuring the space meets American Disabilities Act standards and providing a paved, lighted parking lot. Proposals must be submitted using form FMPS-202E and include a proposed floor plan, with square footage calculated according to the ANSI/BOMA-Z65.1-1996 standard. To be eligible, property owners or agents must have submitted form FMPS-202C acknowledging specific South Carolina Code of Laws and Regulations. Proposals are due by 4:00 PM on November 20, 2026, and should be submitted via mail or email to Real Property Services. Award decisions will be based on cost analysis, responsiveness to requirements, and space efficiency. Proposals may be disqualified if they use non-standard lease forms, include operating expense pass-throughs above the rent rate, or require reimbursement of tenant improvement costs upon early termination. All inquiries must be directed to Real Property Services, as direct contact with the Department of Insurance is prohibited.
Department Of Administration

POSTED

about 20 hours ago

DEADLINE

in about 1 month
NAICS: 531120
New
SLED
Real Estate Lease- Henrico
Solicitation # 5049
The Commonwealth of Virginia Department of General Services, on behalf of the Department of Social Services Division of Licensing Programs, is soliciting proposals for approximately 1,000 usable square feet of commercial office space in the West End of Henrico County, Virginia. The desired location must be within a 10-mile radius of the DSS headquarters. The agency is seeking a 120-month lease term with two five-year renewal options and prefers a flat, full-service rental rate. Requirements include 13 parking spaces included in the rent and a facility that is ready for possession with a valid certificate of occupancy. Proposals will be evaluated based on lease costs, location suitability, and the ability of the premises to meet operational needs. The facility must adhere to strict quality and safety standards, including full ADA compliance, a mold-free and asbestos-free environment, and specific HVAC temperature and humidity controls. Technical specifications for interior improvements include low VOC materials, specific acoustical tile NRC ratings, and branded 100 percent nylon carpeting. Interested parties must submit signed proposals, including a completed Property Data Sheet, to the designated contact at Jones Lang LaSalle Americas, Inc. Rent and additional charges will be paid in arrears, and landlords must be registered in the Commonwealth accounting system.
Department of General Services

POSTED

about 20 hours ago

DEADLINE

in 8 days
NAICS: 531120
New
International
EOI - OPERATOR OF THE SHIPYARDS’ PIPE SHOP BUILDING
Solicitation # 234607
The City of North Vancouver is seeking Expressions of Interest for the lease and operation of the Pipe Shop, a 9,000 square foot heritage venue located within The Shipyards waterfront destination in British Columbia. The objective is to identify a creative operator capable of providing year-round activation that attracts diverse audiences and enhances the economic vitality and visitor experience of the area. The building is offered with minimal fit-out, and while interior adaptations are permitted, the exterior is protected as a heritage structure and cannot be altered. The City is flexible regarding the partnership structure, welcoming proposals for conventional leases, license arrangements, management agreements, joint ventures, or social enterprise models. This process is an invitation for ideas to establish a shortlist for further exploration and is not a formal tender or request for proposals. Submissions will be evaluated holistically based on concept fit, respondent capability, financial and operational sustainability, and the overall contribution to The Shipyards. Interested parties must submit a single PDF file by November 12, 2026, detailing their proposed concept, organizational experience, business model, and intended contribution to the district. The City anticipates entering into a long-term arrangement beginning in the first quarter of 2028.
City of North Vancouver

POSTED

about 23 hours ago

DEADLINE

in 23 days
NAICS: 531120
New
SLED
JFK Cargo Warehouse 2 Development Lease IFO
Solicitation # IFO-JFK26001
The Port Authority of New York and New Jersey is seeking qualified firms through solicitation IFO-JFK26001 to enter into a ground lease agreement for the development, financing, operation, and maintenance of a world-class air cargo facility, known as Warehouse 2, located in the North Cargo Area of John F. Kennedy International Airport. The lease term is set to begin upon the execution of the agreement and will expire on December 31, 2060. The selected respondent will be responsible for all aspects of the project, including design, site preparation, infrastructure, and utility extension, ensuring compliance with the Requirements and Provisions for Work for the North Cargo Area. A critical requirement of the contract is a minimum investment of 70 million dollars by the construction completion date, with a cap on soft costs at 15 percent of that amount. Any shortfall in this investment will be treated as additional rent payable to the Port Authority. Proposals must be submitted electronically by December 4, 2026, and must include a Statement of Qualifications featuring a preliminary development concept, a project management plan, and a subleasing strategy. The Port Authority will award the lease to the respondent whose offer is deemed most advantageous in its sole discretion.
Port Authority Of Ny & Nj

POSTED

1 day ago

DEADLINE

in about 1 month
NAICS: 531120
New
SLED
RFP#: BLPEPS SANTA FE 10.19.2026
Solicitation # 70-35000-26********2466
The State of New Mexico Board of Licensure for Professional Engineers and Professional Surveyors is soliciting proposals for an office lease agreement in Santa Fe, New Mexico, under solicitation number 70-35000-26********2466. The agency is seeking a long-term lease for up to 20 years and is open to various procurement solutions, including existing space, build-to-suit options, or a combination of both. The proposal process is managed through an electronic portal, with a submission deadline of December 7, 2026, at 3:00 PM MST. Applicants must provide comprehensive documentation, including a proposal form, RFP acknowledgement, and disclosures regarding campaign contributions and conflicts of interest. Technical requirements are outlined through mandatory specifications for the agency and the Facility Management Division, as well as telecommunications standards and a conceptual floor plan. Additionally, offerors are required to provide their Federal Tax Identification Number and New Mexico Tax Number (CRS) to be considered for the award. Jordan Moya serves as the primary point of contact for this procurement.
New Mexico

POSTED

1 day ago

DEADLINE

in about 2 months
NAICS: 531120
New
Federal
Ponce Vet Center - Relocation
Solicitation # 36C24426R0012
The Department of Veterans Affairs is soliciting proposals for a fully serviced lease to relocate a Vet Center in Ponce, Puerto Rico. The requirement is for approximately 4,028 NUSF, 4,833 ABOA, or 5,438 RSF of space. The total lease term is 20 years, consisting of a 5-year firm period and a 15-year soft period, with the government maintaining termination rights after the firm term upon 180 days' notice. The facility must be ADA compliant and include 30 on-site parking spaces. This is a total Small Business Set Aside under NAICS code 531120. Proposals will be evaluated using a best value tradeoff process where technical factors—including the facility design, site, past performance, and experience with build-to-suit medical outpatient facilities—are significantly more important than price. The facility must adhere to Facility Security Level II standards, including specific access controls and high-security locks, and must comply with NFPA and International Building Code safety standards. Offerors must provide an experience narrative, seismic compliance certifications, and past performance questionnaires. All submissions are due by November 15, 2026, and must include SAM registration and representations regarding telecommunications and foreign ownership.
Rpo West (36C24W)

POSTED

1 day ago

DEADLINE

in 26 days
NAICS: 531120
New
Federal
Request for Lease Proposal - Kenai Outstation - Soldotna, Alaska
Solicitation # 36C24W270006
The Department of Veterans Affairs is seeking a fully serviced lease for the Kenai Vet Center Outstation in Soldotna, Alaska. The government requires between 2,107 and 2,844 American National Standards Institute/Building Owners and Managers Association Occupant Area square feet of contiguous space, with a maximum limit of 2,987 rentable square feet. The facility must include 20 secured and lit exclusive parking spaces. The lease term is set for 20 years, with the first 10 years designated as firm. The lessor is responsible for providing utilities, janitorial services, basic cable for the lobby and group rooms, and guest business high-speed Wi-Fi. Award will be based on a best value tradeoff process where technical factors, specifically the facility's programmatic and spatial relationships and adherence to the VA's conceptual design, are significantly more important than price. Proposals must comply with strict standards, including ADA interior signage, TSCA Title VI compliance for wood products, and RP 8 seismic safety standards. Security requirements include the implementation of countermeasures and cybersecurity protocols. Offerors must submit proposals using GSA Form 1364 and Form 1217, providing CAD-compatible plans and a detailed security unit price list. The government maintains termination rights after the firm term with 120 days' written notice.
260-NETWORK Contract Office 20 (36C260)

POSTED

1 day ago

DEADLINE

in about 1 month
NAICS: 531120
New
Federal
USDA seeking 1,950 - 2,150 ABOA SF Office/Warehouse w/ 20,000 SF Ware Yard New Location in Pasco, WA
Solicitation # 57-6395-25-001
The United States Department of Agriculture is seeking a new lease for a combined office and warehouse space in Pasco, Washington, under solicitation number 57-6395-25-001. The required space must be between 1,950 and 2,150 ABOA square feet and must include a 20,000 square foot warehouse yard and three surface parking spaces. The lease term is for up to 240 months, with a firm term of up to 120 months. The property must be located within a specific delineated area in the Greater Tri-cities area, bounded by W Sagemoor Rd and HWY 395 to the north, HWY 82 and HWY 397 to the south, HWY 397 and Pasco Kahlotus Rd to the east, and HWY 82 and Taylor Flats Rd to the west. All offered spaces must comply with government standards for fire safety, accessibility, seismic, and sustainability, and must not be located within a 1-percent-annual chance floodplain. Additionally, respondents must adhere to the telecommunications prohibitions outlined in Section 889 of the FY19 National Defense Authorization Act.
Mrpbs Minneapolis Mn

POSTED

1 day ago

DEADLINE

in 17 days
NAICS: 531120
New
Federal
Request for Lease Proposal (RLP): Las Vegas, NV Medical Facility
Solicitation # 36C24W26R0046
The Department of Veterans Affairs is soliciting proposals for the lease of a medical facility in Las Vegas, Nevada, under solicitation number 36C24W26R0046. The government requires between 23,721 and 27,280 ABOA square feet of contiguous space for a 20-year lease term, with the first 10 years being firm. The facility must accommodate a mental health outpatient clinic and meet strict technical go/no-go criteria, including a minimum finished ceiling height of 90 inches, a prohibition on VRF HVAC systems, and at least one ambulance stretcher-accessible elevator for multi-story buildings. Additionally, the site must support 6-foot-wide clear patient corridors and provide 90 to 120 parking spaces, including five ADA-compliant spots. The award will be based on a best value tradeoff process where technical factors, specifically the proposed space layout's ability to meet Agency Specific Requirements, are significantly more important than price. Offerors must submit pricing via GSA Form 1364, itemizing shell rent, operating costs, and parking, with a Tenant Improvement allowance set at 350 dollars per ABOA square foot. Proposals must be submitted electronically in PDF format to the authorized broker, Carpenter/Robbins Commercial Real Estate, Inc., by 4:30 PM Pacific Time on November 16, 2026. Required documentation includes GSA Form 1217, seismic compliance certifications, and evidence of SDVOSB or VOSB status to determine potential set-asides.
Rpo West (36C24W)

POSTED

1 day ago

DEADLINE

in 27 days

General Info

Agency

Department Of Defense → Nswc Indian Head Division

Contract Value

$0

NAICS

531120 - Lessors of Nonresidential Buildings (except Miniwarehouses)

Place of Performance

Indian Head, MD, 20640, USA

Set-Aside

NONE

Awardee

COLLEGE OF SOUTHERN MARYLAND

Award Issued Date

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded
Posted

Award Notice

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Nswc Indian Head Division
Contacts1 person available
OfficeINDIAN HEAD, MD, 20640-1533, USA
Organization / AgencyDepartment Of Defense → Nswc Indian Head Division
Office AddressINDIAN HEAD, MD, 20640-1533, USA
Contacts
James E. Thomasson
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
Notice of Intent to Sole Source Notice: N0017420R0210 Sources Sought Notice: N0017419SN0151

More opportunities from Department Of Defense → Nswc Indian Head Division

Same awarding agency

NAICS: 513210
New
Federal
Gyrus Qual Cert Tracking & Training Platform
Solicitation # N00174-27-SIMACQ-IHD-M-Dept-0004
Software Publishers

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332999
Federal
UID Marking and LabelingThis subcontract for UID Marking and Labeling supports prime contractors on projects for the Department of Defense at the NSWC Indian Head Division. The selected provider will be responsible for performing permanent marking and unique identification of components in strict accordance with MIL-STD-130 and MIL-STD-129, specifically following the requirements outlined in Notes 4, 5, and 13 of Drawing 1516298 Rev N. The scope of work requires the use of precision marking equipment to ensure all components are correctly identified and delivered with full UID verification. Performance will take place in Indian Head, with a response deadline set for October 22, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

12 days ago

DEADLINE

in 1 day
View Details
NAICS: 331210
Federal
Raw Material Supply (Certified Metals/Polymers)This subcontract involves the supply of certified raw metals and polymers for prime contractors working on projects for the Department of Defense at the NSWC Indian Head Division. The selected provider is responsible for sourcing and delivering materials in strict accordance with the specifications outlined in Notes 1, 2, and 9 of Drawing 1516298 Rev N. A critical requirement of this agreement is the maintenance of full material traceability back to the original melt or batch. All deliveries must be accompanied by comprehensive material certifications and Certificates of Analysis to ensure quality and compliance. The performance of this contract will take place in Indian Head, zip code 20640.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

12 days ago

DEADLINE

in 1 day
View Details
NAICS: 332813
Federal
Surface Finishing and Protective CoatingThis subcontract for the Department of Defense involves providing surface finishing and protective coating services for prime contractors working on NSWC Indian Head Division projects. The scope of work requires the application of finishes to container components in strict accordance with Note 3 of Drawing 1516298 Rev N and all relevant military specifications. To be eligible, contractors must maintain an ISO 9001:2015 quality system certification and provide a Certification of Compliance upon delivery of the finished components. The project is categorized under NAICS code 332813 and will be performed in Indian Head, with a response deadline set for October 22, 2026.
Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

12 days ago

DEADLINE

in 1 day
View Details
NAICS: 332813
Federal
Heat Treatment Services for Container AssemblyThis subcontract involves providing specialized heat treatment services for container assembly components supporting prime contractors on projects for the Department of Defense, specifically the NSWC Indian Head Division. The selected provider must execute all heat treat processes in strict accordance with Note 12 of Drawing 1516298 Rev N and utilize equipment that is fully compliant with ISO/IEC 17025:2017 standards. The scope of work requires the delivery of treated components along with comprehensive material logs and Certification Data Reports. Performance will take place in Indian Head, Maryland, under NAICS code 332813. The solicitation was posted on October 8, 2026, with a response deadline of October 22, 2026.
Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

12 days ago

DEADLINE

in 1 day
View Details
NAICS: 332710
Federal
MK 38 Mod 0 Container Assembly FabricationThis subcontract involves the fabrication and assembly of 1,200 MK 38 Mod 0 container hardware units for prime contractors supporting the NSWC Indian Head Division. The scope of work includes precision machining and assembly according to Drawing 1516298 Rev N, as well as the design and creation of custom tooling for manufacturing and dimensional inspection. Final deliverables consist of the completed assemblies and corresponding inspection reports. To qualify, the contractor must maintain CMMC Level 2 compliance and ITAR certification. All work must strictly adhere to ASME Y14.100-2000 and ASME Y14.5M-1994 standards. The project is categorized under NAICS code 332710 and will be performed in Indian Head.
Machine Shops

POSTED

12 days ago

DEADLINE

in 1 day
View Details
NAICS: 332710
Federal
Body, Retainer, and Gasket
Solicitation # N0017426Q1120
The Naval Surface Warfare Center Indian Head Division (NSWC IHD) is soliciting quotes under RFQ N0017426Q1120 for the fabrication, inspection, and delivery of Aviation Critical Safety Items (ACSIs), specifically Delay Bodies, Ignition Device Retainers, and Aluminum Gaskets. This is a total small business set-aside under NAICS code 332710, intended to be awarded as a firm-fixed-price purchase order. The government will utilize a Lowest Price Technically Acceptable (LPTA) basis for award, evaluating quotes based on technical adherence to specifications and total price, including shipping and handling. All deliverables must be delivered FOB Destination to Indian Head, Maryland, with an overall delivery deadline of April 30, 2027. Prospective contractors must meet stringent technical and security requirements. ITAR certification is required to receive technical drawings, which must be requested by October 23, 2026. A critical requirement for technical acceptability is the verification of a current CMMC Level 2 status (Conditional or Final) recorded in the Supplier Performance Risk System (SPRS). Additionally, the contractor must maintain a quality management system adhering to ASQ/ANSI/ISO 9001:2015 and submit an Inspection Test Plan and First Article Testing (FAT) samples where applicable. Quote packages, including the company name, point of contact, UEI, and CAGE code, must be submitted via email by November 6, 2026, at 10:00 AM EST.
Machine Shops

POSTED

12 days ago

DEADLINE

in 16 days
View Details
NAICS: 332439
Federal
Container, Assembly
Solicitation # N0017427Q0001
The Naval Surface Warfare Center Indian Head Division is soliciting quotes for a firm-fixed-price purchase order for 1,200 Container Assemblies under solicitation N0017427Q0001. This effort is a total small business set-aside under NAICS code 332439, with a size standard of 600 employees. The government intends to award the contract to the responsible vendor based on a Lowest Price Technically Acceptable (LPTA) basis, evaluating quotes on technical specifications, brand adherence, and total price including shipping. All deliverables must be shipped to Indian Head, Maryland, by November 27, 2026. Interested offerors must request technical drawings by October 13, 2026, and provide ITAR certification prior to release. A critical requirement for technical acceptability is the submission of documentation verifying an active CMMC Level 1 Self-Assessment recorded in the Supplier Performance Risk System (SPRS), while the final contract requires CMMC Level 2 compliance and a System Security Plan available for review within 30 days of award. Quote packages, including the company name, point of contact, UEI, and CAGE code, are due by October 22, 2026. The contractor is responsible for strict quality control, maintaining a quality system adhering to ISO 9001:2015 and using equipment compliant with ISO/IEC 17025:2017. Deliverables are subject to a zero-defect acceptance threshold and require a Final Dimensional Inspection Report, a Certificate of Completion, and a Certificate of Analysis. Packaging must comply with MIL-STD-130 and MIL-STD-129 for unique item identification and marking. Invoicing and payment will be processed electronically through the Wide Area Workflow (WAWF) system.
Other Metal Container Manufacturing

POSTED

12 days ago

DEADLINE

in 1 day
View Details
NAICS: 325920
Federal
Loaded Cartridge Assembly (MC91) for MK 5 Mod ) Explosive Bolt
Solicitation # N00174-26-RFPREQ-W71-0030
The Naval Surface Warfare Center, Indian Head Division is conducting market research to identify capable vendors for the Loaded Cartridge Assembly, DODIC MC91. This assembly must be compatible with the MK 5 MOD 0 Explosive Bolt used in the AN/BST-1 Buoy system and adhere to specific technical criteria including WS6061 and WS6052. The anticipated procurement involves 100 production units plus all necessary destructive test samples, encompassing the full process of manufacture, nondestructive testing, packaging, and delivery. Interested vendors must demonstrate the ability to establish a manufacturing line and complete all deliveries within one year of award. Requirements include possessing necessary ATF licensing, specific storage capacities, and advanced inspection capabilities such as helium leak rate and real-time radiography testing. To access the restricted Technical Data Package, applicants must provide an approved DD Form 2345, a signed NDA, and an active CAGE code. Responses to the detailed capability questionnaire must be submitted in PDF format by November 9, 2026.
Explosives Manufacturing

POSTED

12 days ago

DEADLINE

in 20 days
View Details
NAICS: 332994
Federal
MK 52 Automatic Gun, Coaxial Gun Control Unit and Associated Spares
Solicitation # N00174-26-RFPREQ-W82-0041
The Naval Surface Warfare Center, Indian Head Division intends to award a sole source, firm fixed price order to Alliant TechSystems Operations LLC, a subsidiary of Northrop Grumman Corporation, under Basic Ordering Agreement N00174-23-G-0002. The contract covers the manufacture, assembly, inspection, packaging, and shipping of 7.62mm MK 52 Automatic Guns, Coaxial Gun Control Units, OBRP Material Cerakote Kits, and Sensor Assembly Harnesses. Each of these items will be managed as separate deliverables, with final quantities to be determined during the award process. This procurement is being conducted on a sole source basis under FAR 6.302, as Alliant TechSystems Operations LLC is identified as the only provider with the necessary technical qualifications and facilities to meet the requirements. The action falls under NAICS code 332994 and is managed by the Department of Defense. Inquiries regarding this presolicitation are directed to Thomas Howes at the NSWC IHD Picatinny Detachment.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

13 days ago

DEADLINE

in 2 days
View Details
NAICS: 541380
Federal
Precision Instrument CalibrationThis small business set-aside subcontract, titled Precision Instrument Calibration, seeks a qualified provider to perform calibration services for tools, instruments, and test equipment supporting prime contractors at the Naval Surface Warfare Center Indian Head Division. The selected provider must adhere to NAVSEA Calibration System Requirements H-246-H001 and utilize certified calibration standards to ensure all measurement and diagnostic equipment is accurately serviced. Additionally, the contractor must meet the Commercial Service Provider definitions outlined in OPNAVINST3960.16 and is responsible for delivering both certified equipment and official calibration certificates. Managed by the Department of Defense under NAICS code 541380, the opportunity was posted on October 6, 2026, with a response deadline of November 5, 2026. This procurement is specifically designated as a total set-aside for small businesses to support critical technical operations within the Nswc Indian Head Division.
Testing Laboratories and Services

POSTED

14 days ago

DEADLINE

in 16 days
View Details
NAICS: 332813
Federal
Chemical Conversion and Anodizing ServicesThis small business set-aside subcontract for the Department of Defense involves providing chemical conversion and anodizing services for the Naval Surface Warfare Center Indian Head Division. The selected contractor will perform surface treatments on machined hardware for prime contractors, utilizing anodizing tanks and chemical baths to apply coatings in strict accordance with MIL-A-8625 standards. Due to the nature of the work, which involves handling controlled unclassified information drawings and parts, the contractor must maintain CMMC Level 2 certification. The project falls under NAICS code 332813, with a response deadline of November 5, 2026. The final deliverable for this engagement is the provision of properly surface-treated hardware components.
Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

14 days ago

DEADLINE

in 16 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS