Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

MEMORY CARD, PERSONA

Active
SPE8E9-26-T-3356Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of a memory card identified by NSN 7025-01-569-9583 and part number W155561P1, classified as a commercial off-the-shelf item for use in personal computers. The requirement is for two units, with delivery scheduled to be completed within 167 days from the contract award, FOB origin, and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and marking must follow MIL-STD-129 with no special marking requirements, while palletization adheres to DLA packaging standards. The item is exclusively supplied by Dresser-Rand, and procurement must be directed to their designated point of contact, Eric Adams. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the hardware except for specific permitted applications such as batteries or instrumentation, and any permitted mercury-containing devices must include dual containment as per NAVSEA 5100-003D. The contract incorporates technical and quality requirements from the DLA Master List, and covered defense information applies under RD003. The sole authorized suppliers are Siemens Energy, Inc. and Curtiss-Wright Electro-Mechanical, both listed under the same part number. The delivery destination is the DLA Distribution center in New Cumberland, Pennsylvania, with transportation governed by DLAD procedural notes C19 and C20. The original required delivery date was December 1, 2026, with a need ship date of February 1, 2027.

General Info

Two memory cards, NSN 7025-01-569-9583, delivered FOB origin to New Cumberland by February 1, 2027, via Siemens or Curtiss-Wright.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC IView Agency

NAICS

334118 - Computer Terminal and Other Computer Peripheral Equipment ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE8E9-26-T-3356 Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
View Agency Profile
Office AddressUS
Contacts
Matthew Kruc
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
MEMORY CARD,PERSONA
MEMORY CARD,PERSONAL COMPUTER
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
DEFENSE SUPPLY CENTER COLUMBUS (16236)
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
THIS IS A COMMERCIAL OFF-THE-SHELF ITEM.
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
DLA DURING "OPEN SOLICITATION ONLY".
TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
11/16/2010 PER ESA DSCP-FC-10-57771:
DSCP IS ADVISED FOR NSN 7025-01-569-9583 THAT DRESSER-RAND IS THE SOLE
SUPPLIER OF THIS MEMORY CARD. THE SUBJECT ITEM PART NUMBER W155561P1 IS
AVAILABLE FROM THEM. THEIR POC IS MR. ERIC ADAMS 585-596-3867. REQUEST
DSCP INITIATE ACTION TO FORWARD RFQ TO DRESSED-RAND AND THEIR POC AS
CITED ABOVE.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
SIEMENS ENERGY, INC. 0AT62 P/N F45461PC164
SIEMENS ENERGY, INC. 0AT62 P/N PLF41357BPC164
SIEMENS ENERGY, INC. 0AT62 P/N W155561P1
CURTISS-WRIGHT ELECTRO-MECHANICAL 830P9 P/N W155561P1
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
SPE8E9-26-T-3356
SECTION B
PR: 7017757030 PRLI: 0001 CONT’D
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017757030 0001 EA 2.000
NSN/MATERIAL:7025015699583
DELIVERY (IN DAYS):0167
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:10 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:02/01/2027 Original Required Delivery Date:12/01/2026
SPE8E9-26-T-3356 NSN/Part Number: 7025-01-569-9583 Quantity: 2 EA Purchase Request: 7017757030QTY: 2 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334118
New
DIBBS
CAMERA-RECORDING, VIDEO
Solicitation # SPE8EN-26-T-2783
This contract pertains to the procurement of camera-recording video equipment under solicitation SPE8EN-26-T-2783, issued by the Department of Defense through the Defense Logistics Agency. The item is identified as a commercial item with the NSN 5836016474212 and part number 960-000971 supplied by Logitech Inc. The contract specifies a quantity of 531 units to be delivered FOB origin within 167 days, with inspection and acceptance occurring at the destination location. All packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including marking per MIL-STD-129 with no special markings required. The delivery destination is DLA Distribution Cherry Point in North Carolina, and transportation is governed by DLA procedural notes C19 and C20. The required delivery date is November 21, 2026, with a need ship date of February 1, 2027, and no quantity variance is permitted. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the supplied hardware, with exceptions limited to functional uses in batteries, fluorescent lights, certain instruments, weapon systems, and chemical reagents authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment boundary as specified in NAVSEA 5100-003D. Technical and quality requirements referenced by R or I numbers are to be sourced from the DLA Master List of Technical and Quality Requirements, with revisions governed by the solicitation or award date depending on acquisition type. The item is further subject to Covered Defense Information provisions and the specified unit of issue is each (EA), priced at $531.00 per unit, totaling $280,961.00. All documentation and compliance with these contractual stipulations are mandatory for contract performance.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334118
New
DIBBS
KEYBOARD, DATA ENTRY
Solicitation # SPE8EN-26-T-2791
The contract pertains to the procurement of three keyboard, data entry units with NSN 7025-01-607-1165 under solicitation SPE8EN-26-T-2791, issued by the Department of Defense through the Defense Logistics Agency. Delivery is required FOB origin within 167 days of award, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E using specific methods including preservative treatment, packaging material code 00, and containment defined as D3 unit and intermediate containers, with marking mandated under MIL-STD-129 and no special markings required. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, with the same location serving as the freight shipping address. A required ship date of February 1, 2027 is specified, with an original required delivery date of April 19, 2027. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the supplied hardware, except for specific approved uses such as batteries, fluorescent lamps, sensors, or chemical reagents, with portable devices containing mercury requiring shock-proof design and a secondary containment barrier as per NAVSEA 5100-003D. Covered defense information requirements apply to specific part numbers, and all technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue or award date depending on acquisition size. The unit of issue is EA, with a unit price of $3.00, totaling $9.00, and all compliance must align with DoD procurement protocols including ANSI X12 unit conversions and transportation guidelines referenced in DLAD procedural notes C19 and C20.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334118
New
DIBBS
DISPLAY UNIT
Solicitation # SPE8EN-26-T-2793
The contract is for a restricted-source display unit identified by NSN 7025-01-611-1943, with a quantity of two units required under purchase request 7017757158. The item must be manufactured to the original equipment manufacturer’s drawing specifications and can only be supplied by prequalified sources listed in the solicitation; offers based on parts from other manufacturers must include comprehensive technical data for evaluation per DLAI 3200.1. Compliance with all DLA packaging, technical, and quality requirements referenced in the DLA Master List of Technical and Quality Requirements is mandatory, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Configuration changes, deviation requests, and removal of government identification from non-accepted supplies are governed by specified procedures. Delivery is due within 167 days after award, with performance located in Tracy, California, 95304-5000. The solicitation, numbered SPE8EN-26-T-2793, was posted on August 5, 2026, and responses are due by August 17, 2026, under NAICS code 334118. Primary point of contact is Jennifer Esworthy, reachable via email and phone provided.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334118
New
DIBBS
DECODER, COMPUTER
Solicitation # SPE8EN-26-T-2850
This contract, issued under solicitation SPE8EN-26-T-2850 by the Defense Logistics Agency, pertains to the procurement of 10 units of a Decoder, Computer identified by NSN 7050-01-689-4756, each priced at $3.00, with a total value of $30.00. All units are to be delivered FOB destination within 20 days of award, with zero variance permitted in quantity. Delivery is directed to multiple U.S. Navy vessels stationed at FPO addresses across the Pacific and Atlantic, including USNS Medgar Evers, Carl Brashear, Cesar Chavez, Charles Drew, Alan Shepard, Wally Schirra, Washington Chambers, Richard E. Byrd, William McLean, and Amelia Earhart. Each shipment must comply strictly with MIL-STD-2073-1E packaging standards, MIL-STD-129 marking requirements, and DLA Packaging Requirements for Procurement, with no special marking codes applied. Packaging includes unit containers coded as D3, intermediate containers as E5, and must be palletized in accordance with RP001 guidelines. The item must not contain intentional mercury or mercury compounds, except where functionally required in batteries, fluorescent lights, sensors, weapon systems, or specific chemical reagents specified by NAVSEA, with portable devices containing mercury needing shock-proof design and secondary containment per NAVSEA 5100-003D. Inspection and acceptance occur at the destination, and the contract incorporates technical and quality requirements from the DLA Master List. All shipments must reference DLAD Procurement Notes C19 and C20 for transportation and first destination handling, with vendor-specific logistics codes and tracking numbers provided for each delivery point. The original required delivery date is between August 3 and August 4, 2026.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334118
New
DIBBS
DISK DRIVE UNIT
Solicitation # SPE8EN-26-T-2796
The contract pertains to the procurement of two Disk Drive Units, specifically Data Express DE275 SAS/SATA 3G Aluminum removable drive carriers, identified by NSN 7025-01-605-4442. The items must comply with DLA packaging requirements and adhere to all technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision controlled by the solicitation issue date for simplified acquisitions. Government identification must be removed from any non-accepted supplies prior to delivery. The vendor, CRU ACQUISITION GROUP LLC, is required to deliver the units within 167 days of award to Hill AFB, Utah, 84056-5734. The solicitation, numbered SPE8EN-26-T-2796, was posted on August 5, 2026, with responses due by August 17, 2026. It falls under NAICS code 334118 and is managed by the Department of Defense’s Construction & Equipment T & IFO EQ office, with Jennifer Esworthy as the primary point of contact for inquiries.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334118
New
DIBBS
CONVERTER, DIGITAL T
Solicitation # SPE8EN-26-T-2842
This contract specifies the procurement of a digital-to-digital converter under solicitation SPE8EN-26-T-2842, with the NSN 7050-01-697-1492 and part number IMC-470-SFP-US from Advantech Corporation. A total of 24 units are required, to be delivered in 121 days FOB origin, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including marking per MIL-STD-129. The delivery address is the DLA Distribution facility in New Cumberland, PA, and the shipment must meet all transportation guidelines specified in DLAD Proc Notes C19 and C20. The required delivery date is January 7, 2027, with a need ship date of December 17, 2026. The contract incorporates technical and quality requirements from the DLA Master List, including specific mandates for mercury restrictions: mercury or mercury-containing compounds must not be intentionally added to the hardware except in approved applications such as batteries, fluorescent lights, sensors, weapon systems, and chemical reagents specified by NAVSEA. Portable devices containing mercury must include shock-proof design and a secondary containment boundary per NAVSEA 5100-003D. Additional documentation requirements include Source Approval Requests, Configuration Change Management for Edgewood materials, and the removal of government identification from non-accepted supplies. The unit of issue is each (EA), and all packaging, marking, and handling must adhere strictly to the referenced DLA and DoD standards, with the contract governed by revisions to the Master List in effect on the solicitation issue date.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334118
New
DIBBS
DISPLAY UNIT
Solicitation # SPE8EN-26-T-2804
The contract is for the procurement of 12 DISPLAY UNITS with NSN 7025-01-548-5775 under solicitation SPE8EN-26-T-2804, with a required delivery within 50 days of award. The purchase request number is 7017757034, and the NAICS code 334118 categorizes this as an electronics manufacturing acquisition. All technical and quality requirements referenced in this contract are defined by the DLA Master List of Technical and Quality Requirements, accessible via the DLA eProcurement website, with the applicable revision determined based on the solicitation or award date depending on the acquisition size. The contract incorporates provisions for the handling of covered defense information and prohibits the intentional addition of mercury or mercury-containing compounds to any supplied hardware, except for specific exemptions such as functional mercury in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical reagents authorized by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment barrier as specified in NAVSEA 5100-003D. Government identification must be removed from any non-accepted supplies. The point of contact for inquiries is Jennifer Esworthy at the Department of Defense, with the place of performance identified as New Cumberland, Pennsylvania, ZIP 17070-5002. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334118
New
DIBBS
STYLUS, DIGITAL COMP
Solicitation # SPE8EN-26-T-2785
This contract pertains to the procurement of 334 units of a digital stylus identified by NSN 7050016581956 and part number STYLUS-AN/PYQ-10A (C) V 3.1, supplied by Sierra Nevada Company, LLC. The item is subject to strict technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling, adhere to DLA Packaging Requirements, and be palletized according to RP001, with all materials packaged per ASTM D3951 unless overridden by DLA standards. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to any supplied hardware, with limited exceptions for functional uses in batteries, fluorescent lights, sensors, weapon systems, and specific reagents as defined by NAVSEA; portable devices containing mercury must include shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. Delivery is required FOB origin within 47 days of contract award, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. The specified delivery point and shipping address is the DLA Distribution facility in New Cumberland, Pennsylvania, under transportation guidelines DLAD PROC NOTES C19 and C20. The unit price is $334.00 per item, totaling $111,556.00, with the required delivery date set for May 10, 2027, although the need ship date is October 4, 2026. The contract is issued under solicitation SPE8EN-26-T-2785, with a response deadline of August 17, 2026, and is classified under NAICS code 334118. All documentation must align with DoD unit of issue standards, and government identification must be removed from non-accepted supplies. Primary point of contact is Jennifer Esworthy, DLA, via email and phone provided.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334118
New
DIBBS
COMPUTER, SPECIAL PU
Solicitation # SPE8EN-26-T-2806
The contract specifies the procurement of a COMPUTER, SPECIAL PU with interface unit and data transfer capabilities, identified by NSN 1680-01-551-5577 and part number 22E1278-1, with a quantity of 13 units at a unit price of $13.00, totaling $169.00. Delivery is required within 297 days FOB origin, with inspection and acceptance occurring at destination; no quantity variance is permitted. Packaging must comply with ASTM D3951 and be marked and labeled per MIL-STD-129, with palletization strictly adhering to DLA Packaging Requirements for Procurement (RP001), superseding any conflicting standards. The item is designated a Critical Application Item and is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment requirements, alongside the application of Covered Defense Information protocols. All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, whose applicable revision is determined by the solicitation or award date. Delivery must be shipped to the DLA Distribution facility at New Cumberland, PA, with transportation details aligned to DLAD Proc Notes C19 and C20. The required ship date is June 11, 2027, and the original delivery deadline is June 27, 2027, under solicitation SPE8EN-26-T-2806, issued by the Department of Defense with primary point of contact Jennifer Esworthy.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334118
New
DIBBS
PRINTER SUBASSEMBLY
Solicitation # SPE8EN-26-T-2851
The contract pertains to the procurement of a printer subassembly with NSN 7025-01-562-8191 and part number 43381719 from OKI AMERICA INC, requiring exactly three units to be delivered within 167 days from the contract award date. Delivery is FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply fully with MIL-STD-2073-1E and MIL-STD-129, with specific packaging methods including pressure sealing, dry storage, and no cushioning material, all packed in unit containers of 10 with intermediate containers coded D3. The item must not contain intentionally added mercury or mercury compounds, except for approved functional uses in batteries, lighting, instruments, sensors, controls, weapon systems, or specified chemical reagents, and any portable fluorescent lamps or instruments containing mercury must be shockproof with a secondary containment boundary as per NAVSEA 5100-003D. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation logistics are governed by DLAD procedural notes C19 and C20. Technical and quality requirements are defined by the DLA Master List of Technical and Quality Requirements, referenced via R and I numbers, with revision control tied to solicitation or award dates depending on acquisition size. No approved technical data package exists for this NSN, and requests to the DLA Troop Support Technical Data Support Team are prohibited. The procurement is under contract SPE8EN-26-T-2851, solicited on August 5, 2026, with responses due by August 17, 2026, and the original required delivery date is January 14, 2027, with a needed ship date of February 1, 2027. The applicable NAICS code is 334118 and the contracting office is under the Department of Defense’s Construction & Equipment T & IFO EQ.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334118
New
DIBBS
DISPLAY UNIT
Solicitation # SPE8EN-26-T-2781
The contract specifies the procurement of seven DISPLAY UNITS under NSN 7025-01-542-8882, with a delivery requirement of 167 days from the contract award, to be furnished FOB origin. The unit of issue is each (EA), with no tolerance for quantity variance, and inspection and acceptance occur at the destination. All packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrap materials, and intermediate container requirements, with marking following MIL-STD-129 and no special marking code applied. Palletization must adhere to DLA packaging requirements. The delivery address is W1A8 DLA DIST SAN JOAQUIN, Tracy, CA 95304-5000, and the shipment must be scheduled for February 1, 2027, though the original required delivery date was October 26, 2026. The contract incorporates technical and quality standards from the DLA Master List, including prohibitions against intentional use of mercury or mercury-containing compounds in the supplies unless exempted for functional applications such as batteries or specialized instruments, which must have secondary containment as per NAVSEA 5100-003D. Casting or forging may be involved in manufacturing, and if special tooling is needed, the supplier must submit a Casting and Forging Assistance Request. The contract falls under solicitation SPE8EN-26-T-2781, posted August 5, 2026, with responses due by August 17, 2026, and is categorized under NAICS code 334118. The point of contact is Jennifer Esworthy, with the unit of issue and purchase unit defined via the official DLA template.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334118
New
SLED
Procurement Exemption for Talino Digital Forensic Processing Machines from Sumuri
Solicitation # 2026-PE-197
Pierce County is exercising a procurement exemption under Chapter 2.106 of its Code to directly negotiate the purchase of Talino Digital Forensic Processing Machines from Sumuri, citing the unique and specialized nature of the technology that limits availability to a single source. This solicitation, identified as 2026-PE-197, is not a competitive bidding process and no formal proposals or bids will be accepted; vendors may however submit capability statements to demonstrate their qualifications through the specified public notice process. The procurement is classified under SLED organization type and is being managed by the Washington State agency Procurement and Contract Services based in Tacoma, with a response deadline of August 19, 2026. All interactions and submissions must be directed to Andrew Robson, the Contract and Monitoring Manager, using the provided contact details. The place of performance is within the state of Washington, and interested parties are encouraged to review the official portal link for additional procedural guidance.
Procurement and Contract Services

POSTED

about 4 hours ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Same awarding agency

NAICS: 332420
New
DIBBS
Small Business Subcontracting Participation
Metal Tank (Heavy Gauge) Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 483110
New
DIBBS
Transportation of Supplies by Sea

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332420
New
DIBBS
Fire Extinguisher Supply (NSN 4210-00-203-0217)
Metal Tank (Heavy Gauge) Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 339113
New
DIBBS
CARRIER ASSEMBLY
Solicitation # SPE8E9-26-Q-0643
The contract awards 202 units of the Carrier Assembly, Protective Mask, identified by NSN 4240-01-224-4196, under solicitation SPE8E9-26-Q-0643, with a firm fixed price and no variance allowed in quantity. Delivery is required within 60 days after contract award, with freight shipped from origin and acceptance occurring at destination. Packaging must comply strictly with MIL-STD-2073-1E and DLA Packaging Requirements, using specified methods for preservation, wrapping, and containment, while avoiding plastic materials whenever possible. Marking must adhere to MIL-STD-129 with no special coding required. Mercury and mercury-containing compounds are prohibited unless explicitly exempted for functional components like batteries or sensors, and any exempted items must meet NavSea 5100-003D standards for shock resistance and secondary containment. The item is destined for DLA Distribution at the New Cumberland facility, with transportation governed by DLAD procedural notes. The supply is critical to a Department of Defense requirement with a material need date of May 19, 2028, and technical and quality standards referenced from the DLA Master List of Requirements in effect on the solicitation issue date.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 314994
New
DIBBS
MARLINE
Solicitation # SPE8E9-26-T-3289
This contract under the MARLINE designation issued by the Navy through DLA mandates the supply of 230 coils of material, each weighing 20 pounds, identified by NSN 4020-00-240-2185 and purchase request 7017757212, meeting Type 4, Class 1 specifications. The material must be packaged in snug-fitting weather-resistant fiberboard boxes compliant with ASTM D5118, and all packaging, marking, and shipping must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the supplied hardware, except in specific functional applications such as batteries, fluorescent lamps, sensors, weapon systems, and chemical reagents as authorized by NAVSEA, with portable mercury-containing devices requiring shock-proof design and secondary containment per NAVSEA 5100-003D. The jute material replaces hemp in packaging, and the minimum breaking strength is reduced to 140 lbs instead of 175 lbs, with ASTM-D681 permissible for tar content determination. Source inspection is required if the vendor has not supplied this item within the past three years, and inspection and acceptance occur at the destination point. Delivery is scheduled to occur within 525 days from the contract award, with delivery terms set at FOB Origin and no variation allowed in quantity. The shipment must be sent to the designated receiving warehouse in Tracy, California, with transportation governed by DLA procedural notes C19 and C20. The contract references the DLA Master List of Technical and Quality Requirements for all R and I-numbered specifications, with the applicable revision determined by the solicitation or award date depending on acquisition size. The material specification T-R-650 Revision A Gen 1 applies, with all packaging and handling instructions aligned to DLA’s procurement standards. The contract was solicited on August 5, 2026, with responses due by August 17, 2026, and performance is managed under NAICS code 314994 by the Department of Defense, with Matthew Kruc as the primary point of contact.
Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334511
New
DIBBS
SLOT FILLER MODULE
Solicitation # SPE8E9-26-T-3350
The contract pertains to the procurement of 37 SLOT FILLER MODULES under NSN 7050-01-487-3044, with a delivery requirement of 21 days after award. The solicitation, identified as SPE8E9-26-T-3350, was posted on August 5, 2026, and responses are due by August 17, 2026. The acquisition falls under NAICS code 334511 and is managed by the Department of Defense’s Construction & Equipment MRO Service I office, with performance required at New Cumberland, PA, ZIP 17070-5002. The primary point of contact is Matthew Kruc, reachable via email and phone provided. All supplies must comply with DLA Packaging Requirements and the DLA Master List of Technical and Quality Requirements, which are incorporated by reference and whose applicable revision is determined by the solicitation or award date. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specific functional uses such as batteries, fluorescent lamps, sensors, weapon systems, or authorized chemical reagents, all of which must meet additional containment and safety standards per NAVSEA 5100-003D, including shock-proof design and a secondary containment boundary for portable devices.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
DIBBS
URINAL, STATIONARY
Solicitation # SPE8E9-26-T-3310
The contract is for 78 stationary urinals with part numbers 5672 and U5672, manufactured by Anchor Fabricators Inc. in Clayton, OH, and is identified by NSN 4510-00-691-3979. The items must be color white and comply with all applicable technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, which are incorporated by full text. Packaging must meet DLA packaging specifications, and any non-accepted supplies must have government identification removed before return. The solicitation number is SPE8E9-26-T-3310, issued under a Women-Owned Small Business Set-Aside, with a NAICS code of 332913. The request was made under purchase request 7017757728, and delivery is required within 187 days after order. The place of performance is Tinker Air Force Base, Oklahoma, with a response deadline of August 17, 2026, and the solicitation was posted on August 5, 2026. Primary point of contact is Matthew Kruc of the Department of Defense, Construction & Equipment MRO SVC I.
Plumbing Fixture Fitting and Trim Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
COMPRESSOR UNIT, REF
Solicitation # SPE8E9-26-T-3321
The contract is for the procurement of ten refrigerator compressor units identified by NSN 4130-01-090-9093 under solicitation SPE8E9-26-T-3321, issued as a total small business set-aside under NAICS code 333415. Delivery is required within 167 days of contract award, with a specific ship date of February 1, 2027, and an original required delivery date of October 30, 2027. Items must be shipped FOB origin with no variance allowed in quantity, inspected and accepted at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, requiring each unit to be individually encased in a wooden box and secured with plywood planks to prevent movement, with marking per MIL-STD-129 and no special marking codes. The delivery destination is DLA Distribution Puget Sound in Bremerton, Washington. Strict prohibitions apply regarding mercury or mercury-containing compounds, which must not be intentionally added or come into direct contact with any supplied hardware except for specific exemptions such as functional mercury in batteries, fluorescent lights, sensors, weapon systems, or chemical reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and equipped with a secondary containment barrier as mandated by NAVSEA 5100-003D. The contract incorporates all referenced technical and quality requirements from the DLA Master List, with compliance controlled by the revision in effect on the solicitation issue date. Transportation regulations are governed by DLAD Proc Notes C19 and C20, and the unit of issue is specified per DoD standards. The point of contact for inquiries is Matthew Kruc, with additional contract details accessible via the DIBBS system.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
COOLING COIL, AIR, DU
Solicitation # SPE8E9-26-T-3360
The contract specifies the procurement of two cooling coils, air, du, identified by NSN 4130015338172 and part numbers 1262-01-D REV A and 6W8-34-5608T, under solicitation SPE8E9-26-T-3360. The quantity is fixed at two units with no variance allowed, and delivery is required within 167 days of the contract award, with FOB origin terms and inspection and acceptance occurring at the destination. Packaging must strictly comply with MIL-STD-2073-1E, including specific preservation, packaging, and container specifications, and marking must adhere to MIL-STD-129 with no special marking required. All packaging and handling requirements are governed by DLA’s official packaging standards, and the shipment must be sent to the designated receiving warehouse in Tracy, California. The item is subject to all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, and defense information protections under RD003 may apply. The contract includes transportation guidelines referenced in DLAD Proc Notes C19 and C20, and the original required delivery date is May 18, 2027, with a need ship date of February 1, 2027. The NAICS code is 333415, and the responsible contracting office is under the Department of Defense’s Construction & Equipment MRO Service I, with primary point of contact Matthew Kruc.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339999
New
DIBBS
DRAFTING INSTRUMENT
Solicitation # SPE8E9-26-T-3303
This contract governs the procurement of drafting instruments under NSN 6675-00-641-3531, with a quantity of 64 units, pursuant to solicitation SPE8E9-26-T-3303. The technical and quality requirements are dictated by the DLA Master List of Technical and Quality Requirements, referenced by R-numbers such as RP001, RQ006, and RA001, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless a solicitation amendment supersedes it. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to any supplied hardware, with narrow exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and specified chemical reagents. Portable devices containing mercury must meet shock-proof standards and include a secondary containment boundary as mandated by NAVSEA 5100-003D. The product specification deviates from CID A-A-52034 in specific ways: the center horn must be a transparent plastic disc with defined diameter and tolerance, paired with a centered rubber gasket having prescribed dimensions and protrusion, and revised nomenclature replaces obsolete classifications for protractors and triangles, now correctly identifying them as semicircular protractors and triangles with specified angles and dimensions. The contract item is procured as a fully competitive commercial item under federal specification, with delivery due 167 days after award, and is managed by the Department of Defense’s Construction & Equipment MRO Service I, with performance located in New Cumberland, Pennsylvania.
All Other Miscellaneous Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331491
New
DIBBS
SHEET, METAL
Solicitation # SPE8E9-26-T-3307
This procurement requires aluminum alloy sheet metal with specific dimensions of 0.012 inches thick, 48 inches wide, and 144 inches long, weighing approximately 8.304 pounds per sheet, and must be supplied in whole-foot lengths only. All material must comply with exact specifications and严禁 test coupons; non-conforming sheets will be rejected. A Certificate of Quality Compliance, or Mill-Material Certification, is mandatory for every shipment and must be included with the delivery and submitted separately to the DLA Troop Support Contracting Officer. The material must meet the technical standards referenced in the Technical Data Package, including SAE AMS-QQ-A-250B, ASTM B666/B666M-20, and ASTM B660-23, and must be of Alloy 7075 in T6 temper. Continuous identification markings are required on each unit, including the DLA contract delivery order number, NSN, specification revision, alloy, part number, die number, temper, manufacturer’s name, heat and lot number, and dimensions. Markings must be legible, permanent, waterproof, and applied via stamping or stenciling without contaminating the product; adhesive labels are required for small bars, tubes, and shapes under 0.250 inches nominal OD. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award under this solicitation, and any deviation from this requirement must be explicitly stated by the offeror. Suppliers on the QSLD are exempt from source inspection unless otherwise specified, and compliance with the QSL program is strictly enforced—failure to comply may result in criminal penalties. Packaging must adhere to MIL-STD-2073-1E and Level A requirements of ASTM B660, including robust four-corner protection, full edge coverage, and fiberboard or superior top and bottom protection. Marking must follow MIL-STD-129, with special codes ZZ indicating preservation in accordance with ASTM B660 and marking per ASTM B666. The delivery is FOB origin, with inspection and acceptance occurring at destination, and the entire order of 98 sheets must be delivered within 167 days to Warner Robins Air Force Base, Georgia. Failure to meet any requirement, including marking, packaging, or supplier qualification, will result in rejection of the product.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
SOLDERING IRON, ELEC
Solicitation # SPE8E9-26-T-3314
The contract is for the procurement of 46 electric soldering irons with a part number of 3439-00-965-0090, specified as 200 watts with shape B tips, requiring two tips per unit. The item is not classified as hazardous and does not require a Safety Data Sheet, though the hazardous item indicator must remain unchanged. Strict prohibitions apply against the intentional addition of mercury or mercury-containing compounds in or in direct contact with the supplied hardware, with limited exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and specific chemical reagents authorized by NAVSEA. Any portable devices containing mercury must be shock-proof and include a secondary containment barrier in compliance with NAVSEA 5100-003D. The contract incorporates technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements identified by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging, identification, and marking of non-accepted supplies must comply with DLA standards including removal of government identification and physical marking requirements. The solicitation number is SPE8E9-26-T-3314, issued on August 5, 2026, with responses due by August 17, 2026, under NAICS code 332216 for federal procurement administered by the Department of Defense’s Construction & Equipment MRO Service I. Deliveries are due within 167 days of award, and the place of performance is New Cumberland, PA, with Matthew Kruc listed as the primary point of contact.
Saw Blade and Handtool Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details