Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Metrology and Calibration Services for Special Emphasis Hardware

Active

Federal

Response Deadline11/16/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves providing metrology and calibration services for measurement and test equipment used by prime contractors on NAVSUP Weapon Systems Support projects. The scope specifically focuses on the calibration of equipment utilized in the production of Special Emphasis Material Level I hardware, ensuring all work is performed in accordance with ISO/IEC 17025, ISO-10012, or ANSI-Z540 standards. The selected provider will be responsible for delivering all necessary calibration certificates and verification reports. Managed by the Department of Defense under NAICS code 811210, the opportunity was posted on October 16, 2026, with a response deadline of November 16, 2026. This requirement ensures that critical hardware production maintains strict adherence to technical specifications and quality standards through rigorous equipment verification.

General Info

Agency

Department Of Defense → Navsup Weapon Systems Support Mech

NAICS

811210 - Electronic and Precision Equipment Repair and Maintenance

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of N0010426QFF94.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

53--KEY

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 16

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 08:30:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs calibration and verification of measurement and test equipment for prime contractors on NAVSUP Weapon Systems Support projects. Calibrates M&TE used in the production of Special Emphasis Material Level I hardware. Operates under ISO/IEC 17025, ISO-10012, or ANSI-Z540 standards. Delivers calibration certificates and verification reports.

Similar Contracts

Same NAICS industry code

Facility, Kitchen, and Grounds Equipment Maintenance & RepairThis subcontract for Facility, Kitchen, and Grounds Equipment Maintenance and Repair supports prime contractors on Pierce County Parks and Recreation golf course projects. The scope of work involves performing preventative and corrective maintenance and repairs on building facilities, industrial kitchen appliances, and specialized golf course machinery. To ensure the delivery of fully operational facilities and equipment, the contractor must utilize HVAC and small engine repair tools and possess trade-specific licenses for electrical, plumbing, and HVAC work. The opportunity is categorized under NAICS code 811210 and is managed by the Washington Parks and Recreation agency. Interested parties must submit their responses by the deadline of November 13, 2026. Further details regarding the solicitation can be accessed through the Pierce County procurement portal.

Parks and Recreation

POSTED

about 9 hours ago

DEADLINE

Eaton Uninterrupted Power Supply Preventative and Demand Maintenance Services for Peel Regional Police for 5 years

Solicitation # 2026-532T

The Region of Peel is soliciting bids for a five-year contract to provide preventative and demand maintenance services for Eaton Uninterrupted Power Supply (UPS) systems supporting critical police operations. The scope of work covers multiple locations, including the Peel Regional Police HQ, various divisions, the EVK facility, and the Materials Management Center. The selected vendor must provide factory-trained and certified technicians with access to the proprietary Eaton XCP software tool. Service requirements include 24/7/365 emergency availability, with a four-hour response time for emergency calls and a 24-hour response time for regular service calls. To qualify, bidders must provide a confirmation letter from Eaton (OEM) and demonstrate that at least two employees hold Eaton Technician Certifications. Evaluation will consider the bidder's past completion history, litigation and claims record, and customer responsiveness, with a prioritization of Canadian and non-U.S. goods and services. All personnel attending police facilities unescorted must undergo a security background examination and obtain identification badges, with clearance forms due within 10 days of the award. The contract is governed by the laws of Ontario and is issued in accordance with CETA and CFTA trade agreements. Payment will be made via Electronic Funds Transfer (EFT), and the agency allows a markup of up to 10 percent on procured materials and parts. Bidders are required to submit their proposals through the online bidding system by the November 12, 2026, deadline, including mandatory certifications and a history of at least two relevant projects from the past five years.

POSTED

about 9 hours ago

DEADLINE

Postage Meter Installation and Employee TrainingThis subcontract for Tarrant County involves the physical installation and technical configuration of three postage meter machines at facilities located at 100 E. Weatherford and 401 E. Belknap. The selected provider is responsible for delivering fully operational systems and conducting in-person technical training for up to ten mailroom employees to ensure staff proficiency. The project requires strict adherence to Tarrant County HUB policies and comprehensive data confidentiality standards. Interested parties must submit their responses by November 9, 2026, to fulfill the requirements of this installation and training engagement.

POSTED

about 12 hours ago

DEADLINE

APC System Maintenance and Calibration ServicesThe APC System Maintenance and Calibration Services subcontract involves providing preventive maintenance and calibration for prime contractors working on Concho Valley Transit District projects. The scope of work focuses on the periodic testing and validation of sensors using specialized tools to ensure that all collected data is reliable, defensible, and compliant with NTD statistical sampling methodologies. Managed under the Concho Valley Council of Govts in Texas, the contract requires the delivery of fully calibrated sensors and detailed maintenance reports. Interested parties should note the response deadline of November 20, 2026, for this opportunity categorized under NAICS code 811210.

CONCHO VALLEY COUNCIL OF GOVTS

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Ball Valve Refurbishment (Level 1 Repair)This subcontract for the Department of Defense and NAVSUP Weapon Systems Support involves the Level 1 repair and full restoration of ball valve parts kits, specifically NIIN 013212587. The scope of work includes the teardown, evaluation, and refurbishment of ball and mating seats utilizing precision machining and cleaning facilities in accordance with Newport News Shipbuilding drawings. To ensure quality and traceability, the contractor must apply MIC codes and heat lot traceability to all components. The project mandates strict adherence to several industry and military standards, requiring certifications in ISO 9001, ISO 10012, and ISO/IEC 17025. Additionally, all work must comply with MIL-I-45208 and MIL-STD-45662A. This opportunity falls under NAICS code 811210, with a response deadline set for November 13, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 13 hours ago

DEADLINE

Field Service Maintenance for Zeiss Ophthalmology SystemsThis small business set-aside subcontract involves providing full-service maintenance for Zeiss Ophthalmology Systems at the Naval Medical Center Camp Lejeune for the Defense Health Agency. The scope of work focuses on executing Optime Service Complete plans, which encompass preventative maintenance, onsite diagnostic testing, calibration, and software updates for specific equipment including CIRRUS 5000, IOLMASTER 700, HFA3 B60, and ATLAS 900 systems. To qualify, service providers must hold Zeiss Meditec certification and maintain the necessary security clearances for military installation access. The contractor is responsible for ensuring all equipment remains operational and providing detailed service logs. The opportunity is categorized under NAICS code 811210, with a response deadline of October 29, 2026.

Defense Health Agency

POSTED

about 13 hours ago

DEADLINE

Security Camera System Maintenance and Technical SupportThis small business set-aside subcontract involves providing security camera system maintenance and technical support for prime contractors at Fort Rucker under the Department of Defense. The scope of work includes performing both preventative and corrective maintenance, which entails conducting semi-annual inspections based on a 12-point checklist, adjusting camera angles, and ensuring restored system functionality. Additionally, the contractor must provide 24/7/365 emergency response to address critical system outages and deliver semi-annual maintenance reports. Personnel assigned to this project are required to complete AT Level I and iWATCH training. The opportunity is categorized under NAICS code 811210, with a response deadline set for November 17, 2026. Performance of these services will take place at Fort Rucker, Alabama.

W6QM Micc-Ft Rucker

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Load Testing and Certification for Skyhook/Cherry PickerThis subcontract involves providing structural load testing and certification for Skyhook and Cherry Picker equipment on behalf of prime contractors for Navsup Weapon Systems Support. The scope of work requires conducting test loads at 125 percent of rated capacity, held for 10 minutes, strictly adhering to ASME B30.16 and NAWCADLKE TDR No. 23-10039 standards. To execute these services, the contractor must utilize calibrated sensors and heavy-duty load testing rigs. Qualified providers must hold ASME B30.16 certification to ensure all safety and technical requirements are met. The primary deliverables for this engagement include certified Load Test Reports and formal certifications of compliance. The opportunity is categorized under NAICS code 811210, with a response deadline set for November 16, 2026.

Navsup Weapon Systems Support

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Pump Unit Repair and Modification ServicesThis subcontract involves providing specialized repair and modification services for the CTFGL Pump Unit, identified by NSN 4320-01-575-8318, in support of Navsup Weapon Systems Support Mech projects for the Department of Defense. The scope of work includes the complete teardown, evaluation, and repair of the units, utilizing technical orders, manufacturing operations, and specialized diagnostic tooling to ensure the delivery of fully functional and tested equipment. The contractor is required to adhere to a strict 35-day Repair Turnaround Time and meet all SPRS quality expectations. This opportunity falls under NAICS code 811210, with a response deadline set for November 2, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 13 hours ago

DEADLINE

Specialized Seal Repair and OverhaulThis subcontract involves the technical repair and overhaul of a specific seal, NIIN 015028298, supporting prime contractors on Navsup Weapon Systems Support Mech projects for the Department of Defense. The work must be executed using specialized tooling in accordance with contractor standard practices, manuals, and TDP Version O06. To ensure quality and compliance, all units must adhere to MIL-STD-130 for physical identification and successfully pass a Government Source Inspection. The contractor is required to deliver fully repaired and functional seals within a strict 35-day turnaround time. This opportunity falls under NAICS code 811210, with a response deadline set for October 26, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 13 hours ago

DEADLINE

SERVICE AGREEMENT FOR THE CYTENA F SIGHT CELL SORTER

Solicitation # 75N98027Q00016

National Institutes Of Health Olao

POSTED

about 13 hours ago

DEADLINE

Zeiss Meditec Ophthalmology Equipment Maintenance

Solicitation # HT940627QE003

Solicitation HT940627QE003 is a request for quotes issued by the Defense Health Agency, Healthcare Contracting Division-Southeast, for a firm-fixed-price contract to provide full-service maintenance for Zeiss Meditec ophthalmology equipment. The services will support the Navy Medical Center Camp Lejeune in North Carolina, specifically within Building 100 and Building 15 at Hadnot Point. The scope of work includes regularly scheduled preventative maintenance, timely onsite repairs, and software updates for specific equipment, including the CIRRUS 5000, IOLMASTER 700, and HFA3 B60, utilizing Optime Service Complete maintenance plans. The contract consists of a base period from December 1, 2026, to November 30, 2027, with four subsequent option periods extending the potential performance through November 30, 2031. This procurement is a total set-aside for small businesses under NAICS code 811210. Award will be determined on a Lowest Priced Technically Acceptable basis, where the government evaluates technical capability in Volume I and price completeness and reasonableness in Volume II. Quotes must be submitted electronically by 8:00 am Eastern Time on October 29, 2026. Technical proposals are strictly limited to three pages and must not contain company names or logos to ensure an unbiased evaluation. Invoicing and payment for the contract will be processed electronically through the Wide Area WorkFlow system.

Defense Health Agency

POSTED

about 13 hours ago

DEADLINE

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

Metallurgical and Mechanical Testing for Special Emphasis FastenersThis subcontract for the Department of Defense, specifically Navsup Weapon Systems Support Mech, involves providing metallurgical and mechanical testing for special emphasis fasteners. The selected contractor will perform quantitative chemical and mechanical analysis, including thread verification per FED-STD-H28, production lot destructive testing, and Liquid Penetrant or Magnetic Particle inspections. The primary objective is to support prime contractors on shipboard projects through the delivery of detailed test reports and certifications for every heat or lot processed. To qualify for this engagement, contractors must maintain rigorous quality standards, including ISO/IEC 17025, ISO 10012, and ANSI/NCSL Z540.3 certifications. The opportunity falls under NAICS code 541380. Interested parties must submit their responses by the deadline of November 5, 2026.

Testing Laboratories and Services

POSTED

about 13 hours ago

DEADLINE

Manufacturing of Special Emphasis Heavy Hex NutsThis subcontract involves the manufacturing of high-criticality Heavy Hex Nuts for prime contractors supporting NAVSUP Weapon Systems Support shipboard projects. The scope of work requires the fabrication of nuts according to Leslie Controls drawings 38650N, 36938N, and 38980N, utilizing either ASTM-A194 Grade 2H or Grade 7 steel. Deliverables include the finished hardware accompanied by Certificates of Compliance. Strict quality and technical standards must be maintained, including thread inspection per FED-STD-H28 and packaging in accordance with MIL-STD-2073. The performing entity must maintain an ISO 9001 quality system and ensure compliance with ANSI/ASQ Z1.4. This opportunity is categorized under NAICS code 332722 for the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 13 hours ago

DEADLINE

MIL-STD-2073 Packaging and Marking ServicesThis subcontract involves providing specialized preservation, packaging, and marking services for prime contractors supporting Navsup Weapon Systems Support Mech shipboard projects. The scope of work requires strict adherence to MIL-STD-2073 packaging standards and the application of Item Unique Identification markings using laser etchers or equivalent equipment to ensure the durability of Special Emphasis material. The selected provider is responsible for delivering all finished products fully packaged and marked for FOB Destination shipment. This opportunity falls under NAICS code 561910 and is managed by the Department of Defense. Interested parties must submit their responses by November 2, 2026.

Packaging and Labeling Services

POSTED

about 13 hours ago

DEADLINE

Production Lot Destructive Testing for Shipboard NutsThis subcontract involves performing destructive testing on production lots of shipboard nuts for prime contractors supporting Navsup Weapon Systems Support Mech projects. The scope of work focuses on material integrity validation for Special Emphasis Level I hardware, utilizing tensile, hardness, or shear testing in strict accordance with the Technical Data Package. The selected provider must maintain ISO/IEC 17025 laboratory accreditation to ensure testing standards are met. Key deliverables include the submission of formal test reports and the final certification regarding the acceptance or rejection of each production lot. This opportunity is categorized under NAICS code 541380 and is managed by the Department of Defense.

Testing Laboratories and Services

POSTED

about 13 hours ago

DEADLINE

Manufacture of Special Emphasis Plain Round Nuts (NIIN 013397780 & 013397781)This subcontract involves the manufacture of high-precision plain round nuts, specifically NIIN 013397780 and 013397781, for prime contractors supporting Navsup Weapon Systems Support Mech shipboard projects. The contractor is required to fabricate the components according to NAVSEA Drawing 6602371 and TDP Version 003, while adhering to FED-STD-H28 for thread inspection and MIL-DTL-24252 to ensure zero weld repairs. Eligible providers must possess precision machining equipment and hold either ISO-9001 or MIL-I-45208 certification. Final deliverables must include the finished nuts accompanied by comprehensive certification data and DD Form 1423. The response deadline for this opportunity is November 2, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 13 hours ago

DEADLINE

Manufacture of Specialized Check Valves (VALVE, CHK SPCL42X46)This subcontract involves the manufacture of 10 specialized check valves, specifically model VALVE, CHK SPCL42X46 with NIIN 016665954, for prime contractors supporting Navsup Weapon Systems Support Mech. The fabrication process must strictly adhere to Cage Code IM994 and reference 2648038, utilizing precision machining equipment to ensure technical specifications are met. The contractor is responsible for full compliance with several military standards, including MIL-STD-130 REV N for marking and MIL-STD-2073 and MIL-STD-129 for packaging. Additionally, the project requires adherence to DFARS 252.204-7012 regulations. All units must be fully marked and inspected prior to delivery.

Industrial Valve Manufacturing

POSTED

about 13 hours ago

DEADLINE

Destructive Testing for Naval Electrical ComponentsThis subcontract for the Department of Defense involves performing destructive First Article Testing for prime contractors on Navsup Weapon Systems Support Mech shipboard projects. The selected provider will execute government-mandated testing to failure using electrical overload, compression, and tension equipment to ensure structural and electrical integrity in accordance with TDP O04 specifications. The contractor must hold the necessary laboratory accreditation for military-grade destructive testing and is responsible for delivering a certified Test Report for government approval. This opportunity falls under NAICS code 541380, with a response deadline set for October 30, 2026.

Testing Laboratories and Services

POSTED

about 13 hours ago

DEADLINE

Manufacture of MIL-SPEC Electrical Plug ConnectorsThis subcontract involves the manufacture of high-reliability electrical plug connectors for prime contractors supporting Navsup Weapon Systems Support Mech shipboard projects. The contractor is responsible for fabricating connectors with NIIN 010463755, adhering strictly to TDP Version O04 and MIL-DTL-24231 specifications. Production requires the use of precision machining and molding equipment, and the contractor must maintain Special Emphasis Level I capability. All finished products must comply with MIL-STD-2073 packaging standards and be delivered FOB Destination to the Portsmouth Naval Shipyard. This Department of Defense requirement falls under NAICS code 335931, with a response deadline set for October 30, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on NAVSUP Weapon Systems Support projects for the Department of Defense. The scope of work involves performing specialized military packaging and marking, specifically applying markings according to MIL-STD-129, implementing Item Unique Identification per MIL-STD-130, and packaging items in accordance with MIL-STD-2073. All tasks must be completed using approved IUID marking equipment and MIL-SPEC materials, with finished products delivered as FOB Destination. The opportunity is categorized under NAICS code 488410 and was posted on October 16, 2026. Interested parties must submit their responses by the deadline of November 13, 2026.

Motor Vehicle Towing

POSTED

about 13 hours ago

DEADLINE

Supply of Mercury-Free Electrical Components and Raw MaterialsThis subcontract involves the supply of mercury-free raw materials, connectors, and wiring to prime contractors supporting NAVSUP Weapon Systems Support projects for the Department of Defense. The scope focuses on providing electrical components that strictly adhere to toxicity and corrosion requirements specifically designed for the demanding environments of surface ships and submarines. A critical requirement of the contract is the provision of Material Certifications and Certificates of Conformance to verify the complete absence of mercury in all delivered goods. The opportunity is categorized under NAICS code 335931, with a response deadline set for November 13, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

Manufacture of CBL ACTR/LOCK PWR (NSN 6150-01-685-9963)This subcontract involves the manufacture of CBL ACTR/LOCK PWR assemblies, identified by NSN 6150-01-685-9963, for prime contractors supporting the Department of Defense Navsup Weapon Systems Support Mech. The selected vendor is responsible for fabricating cable assemblies according to drawing 8630048-1, ensuring all finished products are properly identified, packaged, and delivered. Strict compliance with technical and quality standards is required, including configuration control per MIL-STD-973 and marking per MIL-STD-129. Eligible vendors must hold ISO 9001 and PRO-020 certifications and guarantee the use of mercury-free materials. The response deadline for this opportunity is November 13, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports the Department of Defense through the Navsup Weapon Systems Support Mech agency. The scope of work involves the preservation, packaging, and marking of finished subassemblies for prime contractors. All deliverables must be shipping-ready containers that strictly adhere to Navy standards, specifically utilizing MIL-SPEC materials and industrial marking equipment. Technical execution requires strict compliance with MIL-STD-2073 for packaging and MIL-STD-129 for marking, with a specific requirement for LEVEL 1 red markings. The opportunity is categorized under NAICS code 488510, with a response deadline set for November 13, 2026.

Freight Transportation Arrangement

POSTED

about 13 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS